Endless Install Loop Of Windows 7 On New HDD

May 13, 2010

I 'got' windows 7 home premium 64 bit edition, went through the install, got to completing installation, then just as it finished it told me some error involving it being unable to do something with a certain piece of system hardware. I don't remember the exact message.Now it's just restarting and telling me that windows failed to install, and that I should press ok to restart.

View 9 Replies


ADVERTISEMENT

Endless Install Loop?

Dec 22, 2012

Whenever it finishes updating stage it restarts and acts like nothing ever installed, this has happened 4 times already and my system drive is already 40Gb fun, win7 is NOT 40Gb

View 1 Replies View Related

Windows 7 Endless Restart Loop?

Dec 15, 2010

I have had Windows 7 64bit Pro on my computer for around 10 months. I use an Upgrade version through my University that works exactly like a normal copy of Windows 7. I have had no problems with it until now. When I start it up normally and choose Windows 7 (I also have Windows XP pro on my computer) and after about 10 seconds my computer automatically restarts. I tried the Repair My Computer option 3 times and the Last Known Good Configuration twice with no success. When I start it up in Safe Mode, 7 works for about three seconds and then goes to a Blue Screen before restarting.I honestly do not know what is wrong with my computer. I have checked all of the internal connections and there doesn't appear to be anything unplugged or messed up with them in general.

View 1 Replies View Related

Windows 7 / Mac OS X Dual Boot - Endless Loop

Nov 16, 2010

How To: Dual Boot Mac OS X Snow Leopard and Windows 7 on a PC. Now I have the usb stick all set up perfectly and I know it works because it begins to boot. unfortunately it does begin and says Darwin for a split second but then it resets to the HP logo and restarts again. I am able to switch the directory to boot from so my Windows 7 side is unaffected. But I cannot get the OSX side to start. I have been able before I choose the boot site to have on the bottom like a command prompt it seems like where it just says BOOT: and I can type what ever I like into it.

View 4 Replies View Related

Computer In An Endless Loop?

Jul 15, 2012

Recently, I was on my computer (A Toshiba Satellite L305D-S5974. Approx 2.5 years old) when it started to shut down with the famous blue error screen. As annoying as this was, it wasn't a big deal. No, the big deal started when my computer started acting up. It took longer and longer for it to boot to the desktop, sometimes even a half hour because I had to keep manually turning it off in on in order to get a response. Now my computer won't even go past the "Starting Windows" screen.

View 1 Replies View Related

Startup Repair Endless Loop?

Feb 11, 2011

I was recently using my girlfriends computer when a message came up saying something about an automatic update then went into a repair mode. Then when the computer restarted it went into startup repair. It says it can't find any problems, and when you restart it, it keeps going to startup repair. The computer originally had XP on it, and her step dad installed 7 right before we moved across the country, so we don't have any kind of install or recovery discs

View 3 Replies View Related

Startup Repair Endless Loop?

Jun 12, 2011

After a (sloppily done on my part) multiple driver update on 7 Home Premium x64, I've been tossed into Startup Repair. SR goes into an endless repeating loop - never reporting failure, just an endless repeat. I've used the Windows 7 install disk and tried System Restore. Twice System Restore has reported success, yet I immediately end up booting back into the Startup Repair loop.

I am given no options - when I try F8 I'm simply tossed back into Startup Repair. I'm thinking there may be a command prompt way out of the loop, but I'm clueless in that area.

View 1 Replies View Related

Endless Loop At Login Screen

Aug 19, 2009

my work machine started acting up yesterday. even though i have it set to log in automatically, the log in screen started appearing suddenly when i boot. the only option is my regular account.

when i click it, the monitor (old crt) clicks off and on, like it's changing resolution. it goes blank for a second, then the login screen comes back up.

it takes some messing about, restarting, and lots of clicking, but eventually it logs in and i can work. any thoughts? i'm baffled. and i'd rather not spend half the day reinstalling everything...

View 2 Replies View Related

Busy Circle In An Endless Loop On Many Websites Or Pages

Sep 28, 2011

The issue might be on the server end. I don't know. The situation is this I have internet access and many web sites are consistently difficult to access. A good example would be Newegg.com and their pages as well as the links to their site that I click in the email they send me. The blue busy circle stay in an endless loop. I can access there site sometimes if I persistently tap F5 (refresh). While this issue is a problem with many web sites that I try to access some pull up instantly. Is there something I can do to fix this or could it be the ISP or a server issue.

View 9 Replies View Related

Windows 7 Safe Mode/Re-install Infinite Loop?

Aug 29, 2012

the only way I can accurately portray my predicament is via numbered flow chart:

1. Wake up sleeping computer, nothing happens, starts humming faster and faster, so I pull the plug.

2. Turn on computer, goes through the ASUS screen, then the mother board screen has some weird pixelation on the left scree, like some lines or something. Windows is loading....then black screen forever. do this 1 or 2 more times.

3. Go to System Repair and System Restore. Repair fails and tells me a Boot Driver is failing. Restore fails each time.

4. Hold F1, go to boot menu, hit F8, select Safe Mode. Safe Mode works, fantastic.

5. Do AVG Defrag, Disk Clean, and Disk Repair. Then restart...now I get a blue "Dumping Physical Memory" screen.

6. Go back to Safe Mode, use boot disk, tell it to un/re-install windows.

7. Come back later and find it in Phys Mem dump loop, pop it into Safe Mode again. I then see two Windows 7 OSs to choose from, pick the bottom one. Says it can't complete installation in Safe Mode, restart it normal, Phys Dump loop.

8. I do the same thing for the top Win 7 choice, same thing.

9. I've back up all my files, and have drivers/boots disks for everything I own. How do I wipe my hard drive and start fresh?

View 9 Replies View Related

Windows 7 Crashed During Install Now Stuck In Infinite Loop?

Apr 3, 2012

I was trying to reinstall window 7 on my laptop i couldnt factory reboot it so i was installing it with a window's 7 set I had on my laptop but it crashed part way through and no its stuck in an infinite loop and it comes up the error of "the computer restarted unexpectedly or encountered an unexpected error. Windows installation cannon proceed. to install windows, click "OK" to restart the computer, and then restart the installation."

View 1 Replies View Related

Cannot Get Into Install / Reboot Loop

Mar 17, 2012

I built my own custom PC through parts I ordered from newegg last week. Putting the computer together was surprisingly the easy part, while installing a windows OS has been ridiculous. I tried installing windows xp for a few days after running into 0x7b bsod errors, finally getting it to the point it would set up and then would reboot and put the monitor in sleep mode. I tried vista which just immediately gave me the "putting the monitor to sleep" thing right after it said "starting windows." Now i'm trying windows 7 and I once again can't do it. It boots up and does the setting up windows bar, then when it goes to "starting windows" it reboots itself, and does that on repeat. I really hope somebody can help, it's incredibly disheartening to spend $500+ just to have it do anything within its power to not work. I've tried unplugging everything that isn't neccesary, running 1 stick of RAM, I've tried setting it to IDE, RAID, and HCPI. I have tried 2 separate Windows 7 discs. I've reformatted the HD (using xp) multiple times and tried multiple partitions. Windows 7 simply wont even let me get into the installation portion. [code]

View 16 Replies View Related

Crash On Install Now On Infinite Loop?

Dec 1, 2011

When I first booted it up, it began to do it's first time windows load, when I got a BSOD of 0x0000004E and it shut down. Upon restart I got to the point where it tells me " windows was interrupted upon installation, install will proceed after restart" it then restarts and does the same thing. If I shut it off and turn it back on I get the page on choosing to boot normal or in safe mode, but I never get the bios options, as I have the windows 7 SP1 cd that came with.

View 2 Replies View Related

BIOS Boot Loop, Error When Try To Re-install

Feb 21, 2012

I have a laptop with Windows 7 x64, I re-partitioned my drive in Disk Management (shrink) and now my system won't boot.

Here is what happens:

1. Acer Splash Screen
2. Small blinking cursor.
3. Rinse, repeat (Acer screen again!)

When I try to boot from Windows 7 DVD, I get CDBOOT: Could not find BOOTMGR.

View 1 Replies View Related

Zoostorm Freedom - Stuck In Start Up Repair Loop And Can't Re-install?

Jun 25, 2012

has a zoostorm freedom which was working fine and now it's not!! It is stuck in a start-up repair loop. My husband has tried to follow solutions suggested on this site but no joy. Have also tried to re-install windows 7 but no luck either. Took it to PC world and they can't h

View 1 Replies View Related

Nothing Shows On Computer - Endless Searching Animations (Windows 7)

Jun 6, 2012

Sometimes on my many windows 7 pcs when I go to computer or network nothing shows up and the side has the endless magnifying glasses searching, I can still access a network or drive by typing in the location or drive letter, logging out sometimes fixes this, but mainly have to restart the pc? This a windows 7 bug?

View 4 Replies View Related

Windows 7 Stuck In Endless Boot Cycle Startup Repair Freezes

Jan 22, 2012

So, I'm not exactly sure what I did. I was clearing up some space on my computer after using the Norton Removal Tool to get rid of this Norton trial popup that came up everytime I booted my computer. Now, after it told me to restart, it seems to be stuck in an endless boot cycle that resets itself after showing the Windows logo. I've since tried running startup repair, which freezes as it shows the progress bar for 'Windows is loading files'. Safe mode will not work, either. It just sends it back into the boot cycle. Not sure what to do at this point. My computer came pre-installed with Windows 7 Home Premium 64bit, so I don't have any startup discs.

View 3 Replies View Related

Endless / Infinite / Never Ending Folder / How To Delete

Apr 14, 2011

Anyway, I seem to have a folder that goes on forever.Windows.old was backup but there's nothing else in that folder.I tried moving a very deep child folder out and going through that. No luck. So now I just have a recurring DocumentsDocuments etc on my HD.I looked through all this. Tried running CHKDSK, tried deleting it in safe mode, on Linux, and using scripts and stuff I found on the web. Something to do with Robocopy.

View 9 Replies View Related

Endless Black Screen Instead Of Rebooting During Installation?

Oct 29, 2010

Have Windows 7 on my laptop and it's been working OK so far. When my WinXP install on my desktop started acting wonky and refused to launch except in safe mode, I figured I'd go ahead and trade up to Windows 7 since I'm a student and can get a copy for $20.I pulled all the data I wanted onto a USB drive, then started installing. Did a clean custom install; deleted both previous partitions and made a single new partition for it to install on (plus the mandatory 100MB partition). It chugged along and seemed to be progressing nicely: Copying files... check. Expanding files... check. Installing features... check. Installing updates... check. Completing installation... VIDEO MODE NOT SUPPORTED. Suddenly my monitor doesn't understand the output it's getting. The system doesn't see the keyboard either: caps lock & num lock buttons don't toggle their associated lights. So I gave it an hour. Still nothing. I figured it must have locked up, so I power-cycled it, hoping it had completed the installation. No such luck, I get an error message saying the installation ended unexpectedly and I have to restart. So I restart. Same thing happens.

During the portion of the install just before the final reboot, while it says, "Completing installation..." the screen goes black to show a single blinking cursor in the top left for a second or so (like it kicked out of the OS), then goes black & says video mode not supported, like its receiving invalid input from the computer. I connected another monitor and instead of saying video mode not supported, it just shows a black screen, like its getting good output from the computer but the computer just wants to show all black (this monitor does have a 'video mode not supported' equivalent screen, which it's not using in this case; that's why I think it's getting good output from the PC). I know the system isn't reaching the actual reboot, because it doesn't do the 10-second countdown before automatically rebooting, it just jumps straight to the black screen.

Machine Stats Processor is a 3.0GHz Core 2 Duo. Has 2GB of RAM. GPU is an Nvidia 8800 GT. Monitor is a Dell 2007WFPb. Disc I'm installing from says "Windows 7 Ultimate 32-bit x86 Upgrade: Pre-existing OS License Required (Product Key Required) - September 2009 Systems Student Media".

Current Things to Try Install WinXP and give Upgrade Advisor a shot. Current Operating System, pre-install- Never multi-booted before, not planning to start now. Current Hardware- 1 SATA hard drive- 1 SATA DVD drive- 1 USB external drive, but not connected during install- Didn't see any disks with an exclamation point or yellow triangle - Not a new HD; as I said, it's one I was using before, I deleted the two partitions I was using with WinXP, made a single new partition (plus the mandatory 100MB one), and formatted the new one using the installer's Disk Manager Windows 7 installation details - Disc says Windows 7 Ultimate 32-bit x86 Upgrade: Pre-existing OS License Required (Product Key Required) - September 2009 Systems Student Media ... I saw on various forums before I started that Upgrade versions could do clean new installs as well - 32 bit (x86) version - Bought a legit DVDInstallation Media- From a DVDThe procedure and speed of burning the ISO to DVD has been the most frequent cause of installation failure- Bought itOther- No overclocking?

View 9 Replies View Related

Stop Endless User Names And Password Demands

Feb 5, 2013

How to stop endless user names and password demands

View 3 Replies View Related

Stop Endless User Names And Password Demands?

Feb 5, 2013

How to stop endless user names and password demands

View 1 Replies View Related

Windows Upgrades In A Loop?

Feb 10, 2013

Every time I shutdown I get the same updates occurring. It seems to have got in a loop.

View 14 Replies View Related

Windows 7 Startup Loop?

Jun 19, 2011

I have had my computer for around a year now and it has come pre installed with windows 7. it has recently stated going to the windows start up repair. it goes trying to find a problem then it say windows is unable to locate the issue or something like that. i am by no means a computer wiz but i have tried restoring from a previous date but it say that file is corrupt i am also unable to start in safe mode i have looked around for a few days now on the internet to come up with a solution but with no success

View 1 Replies View Related

Windows 7 64 Bit Boot Loop?

Nov 24, 2012

I was trying to remove some Malware and trojans on my Grandmas computer and sort of crashed it. I was using iObit and I remember seeing something about a rootkit something or another and boot.img file and I did not remove the file as it had the boot.img file, and thats kind of an important file. Anyways after trying to restore and completely reformatting the rd drive, I've had no luck getting the computer past the Windows Splash screen without getting restart windows normally or windows repair options.

View 8 Replies View Related

Windows 7 Update Loop?

Jan 27, 2012

So I'm sure you guys have noticed this before. On another computer (vista home prem) I updated Windows and it got stuck on the loop when restarted finishing up at the 3 of 3 ( 0 % ) areaI don't have any disk to insert, all I have is another vista ultimate but I don't want to install that on the computer. What can I do? Is there something that I can download to flash drive to boot from to where I could be able to create a system restore

View 1 Replies View Related

How To Fix Windows 7 Boot Loop

Sep 24, 2012

I used to think I was pretty decent at computer stuffs until a couple of days ago.I sold my old ATX mobo and replaced it with an ASRock M-ITX motherboard because I wanted a smaller system.However, I didn't really know that I had to delete the old mobo drivers before setting up a new rig. Upon pushing the power button, I am greeted with a black screen stating that W7 can't boot properly. If I press "Start Windows normally" it bootloops. Thus, I downloaded Hiren's boot cd and followed the instructions from this thread:

[URL]

I've found the Fix HDD controller program, but my 500GB HDD (which stores my W7) is not recognized. It is recognized in the UEFI BIOS, but not in miniXP.

View 9 Replies View Related

Windows 7 Restart Loop?

Nov 3, 2012

I have had a series of problems to my desktop in the last six months and the latest one is worrying me like hell.System specs :cpu : intel core 2 quad 2.83ghzobo : asus p5q pro ram : 2 * 2 gb zionpsu : 600 watt cooler master hdd : 1tb seagate gpu : zotac gts 250 eco 1 gbNow the problem :Suddenly , my computer started to have random reboots. I could not figure out why . Most of the times , it would not get past the starting windows logo . At times , the desktop gets loaded and restarts . Safe mode works sometimes , but not at other times.I was frustated , so i went for a fresh installation . There were restarts during "completing installation " also ... But somehow i got through it after 3 4 try.After installation , the desktop gets loaded and after 5 sec , again restart.And then back to old ways , restart after the windows logo

View 5 Replies View Related

Windows 7 System Repair Loop?

Jun 14, 2011

Every time I start up my Windows 7 Home Premiuem x64 laptop, I get the startup repair screen. It always says that the problem cannot be fixed; this has been going on since last night and I've tried several methods, none of which seem to work. It won't even let me access the login screen; as soon as I start my laptop it goes straight to startup repair.

View 2 Replies View Related

Windows 7 Stuck In Startup Loop

May 3, 2012

I was using EASUS partitioning tool to repartition my hard disc a few days ago as my C: drive was running out of space. I merged the C: drive (which is my system drive) with my D: drive (which contains a lot of data as well). All seems to be going well, but after the usual reconfiguration and restart, my windows 7 is stuck in the startup repair screen. Windows is trying to repair my startup without success, which is resulting in a loop. Fortunately i am able to go into safe mode and save my data.

View 5 Replies View Related

Windows 7 Startup & Repair Loop?

Nov 7, 2012

I get the following on boot up Launch startup repair (recommended)start windows normally Selecting either options causes it to enter an infinite loop The last thing I did while it was working was to install a HP printer, it then said restart and since then I have not been able to get pass the Launch startup repair (recommended)start windows normally stage I have tried all the options under F8 on boot, but happy to try any suggestions as I could be completely wrong or may have overlooked something.PS I have read the threads on this forum but can not seem to get it started using the suggestions.

View 2 Replies View Related

Constant Loop Windows Not Starting?

Aug 5, 2012

I am using my iPhone to try to figure out my computer. So it is the only one I have. It is in a constant loop of windows not starting and trying to fix errors then says it can't, I can't get it to load in safe mode or anything else. I can use the box where u put in commands and found my registry hive says 0 bytes. I do not know how to fix this. And I do not have a windows disk cause it came already installed. So how can I fix this and what do I need to do or try.

I do have a Windows 7 product key on the back of my computer.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved