I had an old version of VirtualDrive Pro that I just unpacked, and that doesn't work with Windows 7. I emailed the company to ask about upgrading and they never responded. Is there another company that makes a similar product, with better customer service? I just want to be able to play games without having the CD or DVD in the drive.
View 6 RepliesI have an .ROM file I would like to "try before I buy" so to speak. Is there anyway to safely emulate a BIOS update?
View 9 Replies View RelatedHow to Emulate Aero Borders ?
View 0 Replies View RelatedDoes anyone know if there is a way on Windows 7 to emulate two-finger scrolling for devices that are not multi-touch capable?The Linux Synaptics driver has an option that enables this. It usually just works right out of the box.ref: Two Finger Scrolling in Linux (pages cpsc ucalgary ca/~jnjackin/docs/two_finger_scrolling-linux.html)
View 8 Replies View RelatedNow I have a doubt if drive images will work on different computers. I think windows may not work if I do it. Have any of you guys tried it? I also know that unnecessary drivers may be left installed. But the main question is will Windows work if I transfer a drive image to a different computer?
View 4 Replies View RelatedOkay so i have established my DvD drive will not read this but another computer in my house will. I need help getting her {Vista home basic} to share it with my {Windows seven ultimate RC}. I have turned firewalls off and everything.
View 2 Replies View Relatedmy laptop does not read pen drive while other computers do?
View 1 Replies View RelatedI have 2 Windows 7 Computers and neither one will recognize a Lexar 16gb usb flash drive, my son has a Windows 8 Computer and it won't recognize it either. I see the drive in disk mgmt, and, sometimes, Windows explorer, but when I click on it, in Windows Explorer, I get the message, "Please insert a disk into Removable Disk(I". In Disk Mgmt, the device says "No Media", when I right click to go to Properties, the device status shows "This device is working properly" and, finally, when I try to update the driver, it sas the driver is up to date. I think the drive is dead (it was bought for my son for Christmas), but want someone else's opinion
View 1 Replies View RelatedI have two computers currently running Windows 7.
-On both computers, I use an account with administrator privileges
-On both computers UAC is set at the default level.
For some reason, on one computer I am capable of saving files on the C drive without having to run a program with UAC, but on the other computer this does not work. Similarly, if I right click on a program in my C drive and click "Create Shortcut" I receive the message "Windows can't create a shortcut here. Do you want the shortcut to be placed on the desktop instead?" What I'm trying to convey by point this out is this is not a problem that I have with a particular program, but an issue I'm experiencing with the operating system in general.
I have a seagate 2TB USB drive.
Can I make system images from several different computers to the above drive?
When I restore will the computer find the correct system restore file?
I broke my screen on my laptop, I bought another laptop (Acer Aspire one) exactly the same and I want to transfer some files over from my old laptop to the new one. As the screen doesn't work I have removed my hard drive from my old pc I want to attach it to my new pc and drag and drop the files from it to my new pc. But I don't know what cord to by to transfer the files over from my old hard drive to my new pc..
View 3 Replies View RelatedThree Computers on a home network. Desktop in Office (Windows 7) . Wife's Laptop (Windows 7). My laptop ( Vista unfortunately). Norton Security Suite and all three. I have a network setup and a Homegroup established.
Everything was setup and working so that I could share files between all three. My wife was able to open a desktop file make changes and save it back to the desktop computer.
All of that changed. Now we get a message when trying to save the file. "You do not have permission to save in this location. Contact the administrator to obtain permission".
I have given the entire "MY Documents" sharing permission to everyone. I have checked everything. I have looked over all kinds of forums and nothing has worked.
I am to the point of doing a complete reinstall of Windows 7 on my Desktop.
I'm Have a custom tower atm that i built. it has windows XP installed by an update disc. Due to my computers age im building a newer computer running a Phenom II X2. The problem is I'm not sure how the OS's work, haven't messed with them sense XP. I want to install Windows 7 on the new computer in 64-bit.
however I also want to install it on the older one in 32-bit, is there a disc that has both or do i have to buy one or the other. and is using the windows 7 disc on 2 different computers that belong to me against the terms of use?
i have 1 laptop with 7620 and the desktop with RTM, the issue is taht when i do
computerc$
i get the prompt saying taht i need to enter a user and password when i could do it before without entering it.
in XP having both accounts with the same name and password and some register magic solved the problem, but Windows 7 is different many aspects so i need help.
i can bypass this error by sharing all my drives but... i dont want to left my laptop with the legs open, or well turning on and off the sharing option.
the homegroup is working, though only shares what it want and i will not mess with it (too many files in both hardrives to having access to one zone of the partition).
My stepbrothers and I have been playing some games over our LAN lately. Two of us (including myself) are connected from laptops wirelessly, and the other is connected on a wired desktop. The game we had been playing is Call of Duty, patch version 1.5. All we had been doing before was one of us would create a server, and it would show up in the LAN list for the other two of us.
No set up needed, just installed and played. However, this evening we went to play again and no servers show up for the LAN. It doesn't matter who makes the server, no one else can see it. If I try to ping any other computer on the network, I get no response. If I go to the network devices, nothing shows up. However, if I go into my router I can see all devices, wired and wireless.
They just won't show up under the Windows network devices. I am running Windows 7, and the other laptop and desktop are running XP. We have made no changes to any of the systems. LAN servers just stopped showing up.
I have homegroup set up on my windows 7 (I think). I can see all my windows XP computers, but they can't see me. How do I configure my network in windows 7. The network wizard was so simple in windows XP, but I haven't been able to get it right in Vista or Windows 7.
View 5 Replies View RelatedI have two computers, a desktop and a laptop that I use when traveling, and I run Outlook on both. What I have been doing is to transfer the .pst file to a thumb drive then copy it to the other computer. The same location is used so when I boot the computer it looks for the .pst file in the same place.
My question is simple. Is this the best way to do this? Or, should I be looking for one of the cloud based emails?
How do others do this? I can't be the only one with multiple computers who wants to run Outlook on each one.
I have purchase a switch to connect a laptop to a desktop computer, the first one having windows 7 (64 bits) and the second one having windows xp (sp 2 and 32 bits).have done the cables connection and nothing, absolutely nothing happens.The switch is OVISLINK EVO-FSH5C Fast Ethernet Switch
View 6 Replies View RelatedI have two computers - both in the same Homegroup. They both show up in my network map - but I don't know how to allow access to each from the other one. Also, I have a networked printer which does not show in the map.Shouldn't it? It works from both computers.
View 9 Replies View RelatedI have several computers in the house and thought.... its about time I backed these up (I know you should do this regularly) but being a bit unfamiliar with what the end result is on the backup, I'm asking if you can backup several computer to one big external drive and not copy stuff over from one backup to another - i.e. would you end up with folders that you could distinguish from each computer ?
View 4 Replies View RelatedI have two computers, a desktop and a laptop that I use when traveling, and I run Outlook on both. What I have been doing is to transfer the .pst file to a thumb drive then copy it to the other computer. The same location is used so when I boot the computer it looks for the .pst file in the same place.
My question is simple. Is this the best way to do this? Or, should I be looking for one of the cloud based emails?How do others do this? I can't be the only one with multiple computers who wants to run Outlook on each one.
I need to install Windows 7 on several computers. All the settings I do on one computer (desktop theme, registry changes, IE settings, taskbar size, desktop icons and shortcuts, quick launch toolbar etc.) I need to do all over again, by hand , on all the other computers. All are clean Windows 7 installs with nothing else but drivers for each hardware.
View 2 Replies View RelatedWe are deploying 10 Toughbook H1's for doing electronic patient care reporting and interfacing with our dispatch center. They are running Windows 7 Professional and will have mobile broadband connections. We'd like to have them setup essentially the same, with all the same settings and restrictions. What is the best and fastest way to do this? I've used the local group policy editor but haven't been able to figure out how to copy those settings from one computer to another. Each computer will have a standard user account. We'd like to prevent the installation of programs (except by admins) and changing of most settings. We're also going to attempt to restrict most internet access except for approved sites.
View 9 Replies View Relatedthere isn't going to be upgrading for old computers 2008 and older.
i say this because i have tried windows seven and it is slow even on my newest computer it is very sad and all three of my computers are power house is anyone else having this problem...
Both my desktop and my laptop are insomniacs. I have wake on lan configured on the desktop, but I only want the machine to wake up when I send the magic packet. I have set it that way in the network adapter settings, and still it will turn on at random times. I have checked the BIOS to make sure that nothing is causing it to turn on there. I have checked the power settings to make sure that the wake timer turned off. I have gone into Windows Media Center to make sure that it will not wake up my computer to update constantly.
I then decided top go into command prompt on both computers to see what is causing them to wake up. I typed in "powercfg -lastwake" on both computers and it said that the last wake on my desktop was caused by the USB root hub. I went into the device manager and checked all of the USB root hubs to make sure that the device was allowed to turn off to save power. I did not see any of them with the setting that allows the device to wake the computer on.
On my laptop it said that the last wake was caused by the power button. the only problem with this is that the event viewer says that it woke up at 4 in the morning while I was fast asleep. The event viewer confirmed what powercfg had said. The laptop is closed and nothing could cause the power button to become depressed while it is closed. What is causing my laptop to turn on?
As for the desktop, I am waiting to see if changing the USB root hub settings will have any effect.
Does anyone have any other possibilities was to what might be causing my computers to wake up?
I have a desktop and a laptop and I already did a clean install on my laptop. Can I use the same code for a clean install on the desktop?
View 1 Replies View RelatedI recently came to own a new computer, I've been using it for a while and set up Remote Desktop connection on it with Now i'm going back to my old machine to try and set it up as a media server. Its not going to have a monitor connected to it so i need some way to connect and see whats going on.Both machines are Win 7, although my old one is running 32bit.I have a linksys e1200 router and both are wired connections.it to the network so i can remote into it. I've set it up as best i could but it still wont allow me to connect
View 9 Replies View RelatedI just need to rename the laptop!Woo, that's all fine and dandy, except when I renamed my laptop from Ken-PC (the name shared by both laptop and desktop) to KenLaptop and rebooted, there was a whole slew of problems caused by the namechange. Very long story somewhat shortened, it looked like I was booting up win 95.Multiple error screens, very retro GUI, all fixed by renaming my laptop Ken-PC again.I'm just trying to be able to share my files between the two computers!
View 4 Replies View RelatedI tried to read the tutorials from this forum regarding networking. I am too dumb to understand. They are all Greek to me.
Is there a " How-to for Dummies " instructions for connecting my 2 laptop computers ? Windows Vista Home Premium 32-bit SP2 Windows 7 Home Premium 64-bit SP1
They are both wireless enabled, but because my Vista computer battery refuses to charge, it is always plugged in. ( $124 for a battery replacement ? No way. )
In fact both my laptops are plugged in all the time. ( don't laugh ).
ISP is Bell.net.
t-4-2
I have a home network using the KEYSOFT workgroup. There are several XP computers on this network and everything has worked great. I just got a new Windows 7 laptop. I'm using a WiFi network to connect to the other computers. I set the Win 7 computer to use the KEYSOFT workgroup, and I can actually see the other computers on the network, but when I try to access them, Win 7 makes me log onto the other computer.
This has two problems:
1. I have never before needed to log onto other computers to access them.
2. The logon window says that I must log onto the other computer in the domain LAPTOP (which is the name of the new Win 7 computer). Since I'm using a workgroup and not a domain, I can't log on successfully. The logon dialog shows no way to change either the domain name or change it to a workgroup name.
How do I access the hard drive of one of the XP computer?
PARTIALLY SOLVED -- If I ignore the erroneous domain and just put in a logon name and password for the other computer, I can get in. But is there a way on this trusted network to access the other computers without logging in?
I'm not sure if this is a Windows 7 problem as a result of the laptop itself or not but as it is the last thing I've checked...
I have 3 computers: 1 wired desktop(64-bit), 1 wireless desktop(32-bit), and 1 wired laptop(Lenovo T400 w/ 64-bit) each running Windows 7 Professional. The two desktops are able to view one another fine in the Homegroup and exchange files.
The T400 laptop is having some issues. It can see the wireless desktop and transfer files from that machine to itself, but it is not able to even see the wired desktop in the homegroup. Both desktops are able see the laptop but neither is able to get files from it.
Each of the desktops can see all 3 computers in the standard network location, the laptop is only able to see the wireless desktop.
I've run troubleshooter on all three computers, and I've ensured they are all on the 'home network'. I've also made sure the network discovery/file sharing/etc is on in the 'advanced settings' and they are all apart of the same workgroup.
The problems seem focused on the laptop, and both desktops worked right from the get go but the laptop hasn't. Further, I used to have Windows 7 RC (Build 7100) on both the wired desktop and the wired laptop and homegroup feature worked flawlessly at that time...just not with the release.