Anyone have luck with Windows 7 drivers for the Line6 GuitarPort? I saw a couple threads here. One said Line6 products worked great on Windows 7, but that was one of the earlier builds. I have the RC Beta (latest) and the drivers from Line6's site (XP/Vista) do not work. They do not have Windows 7 specific drivers, yet.
My device is showing red constantly and I get no sound through it w/o the drivers, apparently.
I have a Line 6 Guitar Port that is run as a digital input over USB. I have tried changing the buffer and still receive a slight lag that makes it impossible to play as the lag throws off any rhythm. Any ideas on removing the lag from the input device?
View 0 Replies View RelatedI'm running Windows 7 32 bit and I just noticed that all my drivers for the USB controllers, Audio/Sound devices and the Networking internet (Broadcom Netxtreme Drivers) have all died. They indicate that a Code 39 is the problem. I tried to load some of the drivers but it wouldn't allow them to install. I did a last known configuration attempt, no results. Did a system restore and it gave me an error message saying it didn't restore properly. I am trying to get the drivers online, burn them to a disk and load them. I have no internet access on that PC and the USB ports obviously don't work. I can get drivers on this PC online. Some I can't find. I did the uninstall driver, disable, all the usual for this problem. I am stumped. Any recovery attempts produce nil results. Thanks to Microsoft, I have no installation disc to do a new install or a backup image.
View 3 Replies View RelatedComputers says thers audio and drivers are all correct and enabled tried reinstalling the drivers. but still. No sound?!
View 3 Replies View RelatedDRIVERS FOR sony laptop model PCG71312L DRIVERS DOWNLOADS?
View 1 Replies View RelatedI NEED NVIDIA DISPLAY DRIVER FOR TOSHIBA SATELLITE C665-I5011 LAPTOP
View 2 Replies View Relatediam using windows 7 ulitimate 32 bit.while connecting net setter does not recognise the system .what is problem? solve as soon as possible.
View 1 Replies View RelatedI'm taking a ghosted image to another machine. On the image I have my device drivers set with static IP (e.g. Local Area Connection 1 is the static IP I want). I have two local area connections, 1 and 2, and 1 is what I want it to be while 2 is a default Microsoft IP.I put that image onto another system and after loading it I don't have Local Area Connections 1 and 2 anymore but Local Area Connections 3 and 4. When I first boot, the computer says Device Drivers Successfully Installed.Why am I losing Local Area Connections 1 and 2 and thus creating 3 and 4 which both have default Microsoft IPs? I want to retain the Local Area Connection 1 that has the static IP that I desire.
View 5 Replies View RelatedHaving issues with RAID0 array being detected by Windows7 Ultimate x64 as SCSI. Apparently these drivers are the 'default' drivers that install when the RAID array is initialized. There is no option at this point to install other drivers instead.Using DeviceManager, there is an option to 'update drivers', and regardless of the method chosen, even selecting the file for a previously-downloaded set of drivers, Windows7 always comes back with a message of "Windows has determined that the best drivers for your system are already installed". Considering that SCSI drivers are the OLDEST ones out there, and actual SCSI devices are becoming rarer and rarer, how is it that these drivers cannot be replaced with more current and more applicable drivers?
View 5 Replies View RelatedSony vaio e series drivers for windows 7 64 bit LAN drivers?
View 1 Replies View Relatedsend webcam & audio drivers for HP G 6000
View 1 Replies View RelatedI've installed Windows 7 instead of Vista in my Vaio vgn-fw250j. After that cd-dvd does not read nor burn dvd's.
View 1 Replies View RelatedI've recently been having various issues with my pc, among the things I tried to do was update my graphics card driver: found the newest driver crashed madly, and rolled back.What benefits are there in going for the newer ATI Catalyst drivers compared to the one defaulted by windows but which hasn't updated in 3 years. Generally what could have changed? Compatablity? If it works it works. Stablity? Performance? Heat management?Since it takes me 2 hours to download a driver (slow connection) I'm sticking on my Windows 7 default ones: I know they work. It does make me ask though if there is a benefit to upgading after i've got my PC stable again.
View 5 Replies View RelatedWhats the recommended installation procedure for installing drivers for specific hardware from a developers site or using the windows 7 default drivers?
For example when I install my windows 7 x64 Betas it found and installed the drivers for my chipset and everything fine. However browsing my Motherboard manufactures website I see they Drivers for chipset, audio, and other components I can download.
Would you recommend I stick with Microsoft drivers or use the drivers on the developers site?
whether I can replace the Elantech drivers with Synaptics drivers, I have tried adjusting the sensitivity in my Elantech touchpad in my Acer Aspire 5750 but still not comfortable with it.I have tried to use windows7 generic drivers by uninstalling Elantech drivers but when I restart Elantech drivers are installed again. would preferably like to install Synaptics drivers if that's possible but I am not sure whether that will work.
View 2 Replies View RelatedI have a simple question, I recently fresh installed Windows7 and was wondering if I should Install the new mobo drivers from the ASUS site (i have an ASUS P5Q Pro) or should I just keep the current microsoft drives for all the chipsets/lan/etc. The only Thing I installed was the Realtek sound driver. Would there be any advantages to install proper drivers? because right now my computer runs perfectly stable and smooth using the Windows7 ones.
View 5 Replies View Relateddownload dell optiplex 380 drivers LAN drivers
View 1 Replies View Relatedcan't find ethernet drivers for sony vaio vpcea31fx windows-7 64-bits laptop.
View 2 Replies View RelatedI have a GTS250 made by EVGA. When I installed windows 7, it knew it automatically.
I would prefer to leave it alone, but I am I missing out? Will it perform better with the Drivers from EVGA?
I've just updated my Acer Notebook to Windows 7. I've installed all the drivers that Acer supplies for Windows 7.
But what about the drivers that are not supplied? Should I install the ones that Acer supplies for Vista or stick with the 'pre-installed' drivers by Windows 7 ... Everything seems to work with the pre-installed ones.
And how do I check wether or not the Intel Turbo Memory is working correctly?
Have one question, When I installed Windows 7 the only drivers I have installed were my video and audio which are not part of the motherboard (not onboard). My computer runs fine but 1 game but more or less I never installed any driver for my motherboard.
Normally you install the motherboards nforce drivers, raid SATA/IDE drivers etc... Do I need to go back to my motherboard vendor and find updates for windows 7 or just leave it they way it is, or should I install the drivers off the motherboard CD I have here? My mobo doesn't have any windows 7 updates btw there all windowsXP based drivers.
How can i get ethernet drivers optiplex 380?
View 1 Replies View RelatedOn my Lenovo W510 laptop I'm currently using the 14.1.1 PROSET drivers from Intel's website for my Centrino Ultimate 6300 wireless adapter. Lenovo just released new drivers on their web site with 14.02.0000. Going off of numbering the 14.1.1 drivers are obviously latest although I have seen that whatever drivers are made for Lenovo are always a little different (features and such). In this case is it better to go off of the laptop manufacturer's drivers (even though they are a lower number and seemingly older) or the wireless manufacturer's page (Intel).
View 1 Replies View RelatedLAN drivers for Dell Optiplex 380 for widows 7.
View 1 Replies View RelatedI recently purchased a Lenovo K230 Desktop and installed 64-bit Win 7 Pro.
Everything works fine... but I'm a little OCD about drivers and making sure everything is up to date.
So here's my question: I found a dedicated Lenovo site with drivers to most of my devices here.
If Windows has assigned it's own drivers (which in some cases are newer), should I just ignore the drivers on the Lenovo site unless something is not working?
Example: Intel has a network card driver on the site, but it's older than the driver Win 7 provided. Is there any benefit from using Intel's driver -- which is 180megs btw (why it needs to be that big puzzles me).
So... Manufacturer drivers Vs. Windows drivers? Any benefit to going back to the manufacturer and using their drivers or just leave things as-is?
how to download dell optiplex 380 drivers lan drivers
View 2 Replies View RelatedDell optiplex 380 drivers LAN drivers?
View 2 Replies View RelatedMy MSI motherboard (K9N6SGM-V) currently doesn't have drivers for Windows 7, can I use the Vista drivers? I am just a basic computer user, I don't need support for directx 11, nor do I needs support for new touch screen features.
View 5 Replies View Relatedthere's a new driver for Atom GPU on intel site
http://downloadcenter.intel.com/filter_results.aspx?strTypes=all&ProductID=3001&OSFullName=Windows+Vista*&lang=eng&strOSs=163&submit=Go%21
I installed it on Windows 7, ran a CrystalMark test and here what it shows:
GDI - 1405
D2D - 674
OGL - 230
It is more than I had before (D2D was 200 at most)
UPDATE: the problem with black desktop after sleep is solved
UPDATE 2: I have turned on Aero on Windows 7 and woking with my system as usual, but the responsiveness of the system is superb. It is first time that I am happy to work with Vaio P, cause it now seems as to be worth its investments Keywords: GMA 500, GMA500, Netbook, Dell Mini Atom, Intel Drivers Suck.
I've run into quite the quandary with a unique "printer" and need some guidance. I have a new Win 7 Home Premium 64-bit system that I was asked to install for a business that is running a laser engraver, but there are only 32-bit drivers for the laser model that they have. I attempted to use the other 64-bit drivers they use, but the data sets are different in the profiles. I was hoping to use the XP machine that it was connected to as a print server of sorts, and just make it like a network print server and not need to install the drivers but that is not working as well. i have seen the local port creations, but that still requires a 64-bit driver, and at this time there is no such thing.
View 6 Replies View RelatedI have a Minolta QMS laser printer (GDI) and I really like and I was able to use it with Windows Vista 32bit and also Windows 7 32bit. I changed to Windows 7 64 bit because I wanted to do Virtualization and added more memory to my PC so I can do this, everything I installed worked just fine except for my printer.
The last drivers Minolta got out for this printer is for Windows XP but I was able to use until now with no problems at all, even with windows 7 32bit works great.
Here is where my problem comes, I believe its possible to make the correct changes to the inf file for the driver to work with 64bit but I dont know about programing drivers, I tried and no luck with my lack of knowledge, so I am asking for help here for someone that knows this stuff, this driver package is very small (2.44mb) and I think it should be easy to fix.
I contacted Minolta but because this is a faced-out printer they dont want to do anything about it. I really love this printer and I need to keep it..