I have Windows 7. I'm trying to downgrade to Vista and re-upgrade to 7. My laptop won't even boot up at all because I apparently have a bad hard drive. I have both DVDs to boot it up but I can't even get past the starting windows screen. I also have the original Drivers and Utilities DVD for my laptop that came with it. I'm not sure if I should attempt to boot the Drivers DVD to repair the damaged hard drive or just try to downgrade and then re-upgrade?
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
So, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
I have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
I have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
Me and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
I have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
I have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.
I've been mulling this over for awhile and I'm throwing it out for discussion. We all have been playing with Windows 7 Ultimate for months now regardless of the build. Now when we get our Windows 7 HP or pro 10/22 will it let us downgrade from ultimate to Pro for example or is it really clean install time. We all know what a pain it is rebuilding our systems. Or is upgrading from ultimate to ultimate the ony way to avoid the pain of rebuilding our systems.
yeah i upgraded to windows 7 last week but i cant play a few games of mine now because the driver updates for my computer is for only vista operating systems...
since i have to go back down to windows vista home premium i had a question, how can i ERASE my entire C drive completely and start fresh with a new windows vista installation disk?
make a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?
Basically I'm having all sorts of problems with blue screens and stop errors on starting up my system (bought as windows 7) and it seems it might be a driver problem.I would re-install windows 7 but I don't have the disc for this, I do however have an old vista disk.My question is if I were to boot from CD and install vista, if it were to actually work and get me onto the system, does it wipe clean the hard drive? As there are many photos and such on there I would like to keep.
I'm trying to install Epicor Active planner on a Window 7 OS 64-bit architecture machine. The installation is not successful and instead the screen shot on which the following displays:"This install require a 32-bit archtecture". What procedure should I follow to change a 64-bit Window 7 OS architecture to 32-bit Window 7 OS architecture?
I have installed Professional but the key I purchased is a dud. It was a MAC key but when I types it in it turns out it has already been used. I had no luck getting a valid one from the seller.It turns out I only really need Home Premium. If I buy a Home Premium one and authorize with that will it work.The reason I don't want to reinstall is I am using Bootcamp on a Mac Pro and I have to mess around a lot to get it working.
I have a computer that is to be decommissioned here at the office, which is to say that it will no longer be used for work. The computer is to be given to a local school. The problem now is that it has been running Windows 7 Enterprise, and the license will expire in a few months. According to this site, [URL], Enterprise can be downgraded into Professional. However I can't seem to find a way to do this. Is this a free service, or do I have to purchase the license again? Customers licensed for use of Windows 7 Enterprise are generally licensed for Windows 7 Professional, which can be downgraded to Windows Vista Business, Windows XP Professional, Windows 2000 Professional, Windows NT 4.0, Windows NT 3.51, Windows 98, or Windows 95 operating system. You would not, however, be able to downgrade to Windows 7 Home Basic or Windows 7 Home Premium, or other consumer (Full Packaged Product - FPP) versions of Windows as they are different product editions and not prior versions of Windows 7 Professional.I have a legitimate Win 7-Ultimate license on my own computer, but I do not have the install CD for it (at the moment).
i Just purchased a HP Envy dv6t 7200 Quad Edition, which is not a Bad PC for HP but it came pre-installed with windows 8. i recently downgraded it to windows 7 and have been using most of the drivers from the HP Pavilion dv6t-7000 which came with windows 7 but i seem to be missing two drivers that i have not been able to find: One Unknown Driver one PCI Device Driver
[IMG]http://**************/image/gp2q7i4m1/[/IMG]
I know the unknown Driver may be hard to find but i was hoping to get some help in finding the PCI Device driver.Here are the specs of the laptop:
dv6t Quad - Windows 8 64 - 3rd generation Intel(R) Core(TM) i7-3820QM Processor (2.7 GHz, 8MB L3 Cache) - NVIDIA(R) GeForce(R) GT 650M Graphics with 2GB GDDR 5 video memory - 12GB DDR3 System Memory (2 Dimm) - 750GB 5400 rpm Hard Drive with HP ProtectSmart Hard Drive Protection - 9 cell Lithium Ion Battery - 15.6-inch diagonal Full HD Anti-glare LED-backlit Display (1920 x 1080) - SuperMulti 8X DVD+/-R/RW with Double Layer Support - HP TrueVision HD Webcam with integrated dual array digital microphone - 802.11b/g/n WLAN - Backlit Keyboard
I recently purchased a used computer at a very low price. On it was an installation of Windows 7. All seemed to be fine. I cleared out all the old junk, cookies, registry etc. Now I get a window error saying the computer can not verify my copy of Windows Enterprise and I should check with my IT department. I am a single home user with Windows 7 Home Premium on my other pc. I spoke with a local computer store and they said it sounds like the previous owner put a "bootleg" copy of Windows 7 Enterprise on the hard drive. Can I downgrade the Illegal Enterprise edition to my legitimate copy of Windows 7 Home Premium Upgrade without losing all the programs and stuff I spent the last week installing on the new used pc?
I'm planning to downgrade to vista, (don't ask why) and I was wondering if I will keep the files I already have (images, music, documents) in a Windows.old folder, because I remember having that when I reformatted Windows 7 or something like that.The downgrade to Vista is built in my Samsung notebook (F4 on Startup to repair computer) but I have images/music on this laptop that I can't lose, and I don't have any USB's or hard drives I can use at this moment.
PC#1 already has Win7 Pro installed on it.I'm building PC#2 and have bought Win7 Home Premium.I want Pro on PC#2, and Home Prem on PC#1. Both OS's are retail box versions, not OEM.I want to downgrade PC#1 from Win7 Pro to Win7 Home Premium without reinstalling. I figure I can change the key on PC#1 to the Home Prem key, so I can use the Pro key on PC#2. Is this as stupid as I think it is? (I won't be offended if you say yes)
I was using a licensed version OS win7 ultimate on my old system. Now after upgrading the system (mobo, processor changed) it prompts me to purchase a new product key. I found that after a major up gradation using the the same product key violates the user end agreement and so I left it there and I purchased a Home premium .( Somebody suggested to convince MS about the up garadation but didn't try it)
Now in the new sys win 7 ultimate sp1 is running and i have to change the product key within 30 days. My query is- Can I downgrade to Home premuim without a clean install?
I have a vaio (svs15125cxb) that comes with win 8 installed. I would really like to go back to my w7 x64 but I can't. I disable safe boot, and then when windows 7 gets to the startup screen it freezes. I removed external hardware and tried different ways with no success.
I received a Dell Inspiron 15 3520 as a gift this Christmas. After playing with Windows 8, I decided to upgrade (downgrade) to Windows 7. So far, every driver downloaded has either worked or done nothing (which is fine) but the video drive has blue screen my computer after updating from both the Dell website and from Device Manager update. I'd like to have a working video card, but I'm afraid that Windows 7 does not support the HD video card in this laptop.
I have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
I installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive. I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked. Can someone explain how to do this, please? I'm not completely computer illiterate, but I'm not familiar with partitioning disks. It was just the one time with Ubuntu.
My laptop is Acer with Windows 7 home premium 64 bit OS. It contain only 1 single partition disk that is c drive only.Recently, i accidentally convert the c drive which contain OS into dynamic disk.After i restart the laptop, it shows the following: BootMgr is missing Please press Alt, Ctrl +del to restart Now, i not able to enter the window. I am so worry because my important data is kept inside the hard disk, and i still not yet do any back up copy on it.I searching on this forum and learnt that i need a window 7 installation disk to repair it, but my problem is the computer dealer not give me any windows 7 installation disk when i baught this laptop as their said all the driver and windows program already kept in side the harddisk.I tried to remove the laptop hardisk which is a 500GB toshiba SATA hardisk. Then, i use the other laptop with Windows XP professional with the intention to copy yhe file inside the toshiba hard disk.However, after plugged in the hard disk to the other laptop, under the disk management, it shows that the toshiba disk as : dynamic disk, unreadable.i having problem to backup the data inside the toshiba hard disk.....
I've been noticing after re-installing Win 7 that I get random floppy drive seeks and the hard drive light flashes like crazy and then everything is fine again.I have Clamwin AV,Spyware Blaster and Spybot S&D installed,but that's it,no Windows Defender or Essentials AV.Any ideas what causes this? It's a minor annoyance,but I just want to make sure it's not damaging anything.Also would Readyboost help me? I've got 2 gigs dual channel PC3200 ram(or I could go with 2.5 gig single channel PC2700)and a P4 at 3 gig until I can afford to upgrade my comp.This is my first post in quite awhile so I hope this is in the right place
I installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive.
I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked.
