Disable Services VIA Script?
Feb 18, 2011like i want to disable, NOT stop the service, so i can include this script with my Windows 7 custom image.
View 3 Replieslike i want to disable, NOT stop the service, so i can include this script with my Windows 7 custom image.
View 3 RepliesI'm trying to sort out issues with my Windows 7 machine and want to disable/set to manual services that I know are not needed, but every time I have done this in the past (a while ago now) I invariably run into an issue where I've inadvertently disabled a service that was needed by something, and I end up scratching my head (as all of my hair falls out around this point) and enabling everything just to sort it..
Is there any utility that anyone is aware of that lets you toggle service status, with the option to reset to default or reset to last status, while showing a list of services that I've changed?
I can't seem to word it properly for a search engine to find relevant results, and find usually specific services and not something I'm hoping exists.
I wish the Services.msc mmc had a checkbox or some sort of flag to show altered services so you could sort them by that, which would help a lot, but it doesn't.
what services are safe to disable in Windows 7 Ultimate edition...
View 9 Replies View RelatedHow to Start or Disable Services in Windows 7 ?
View 0 Replies View RelatedIs there a way that I can hide or disable the access to the services.msc in windows 7?the account is under admin and is the only account on the computer.The reason for this is the shared computer that I someone keeps turning off my remote access for teamviewer, bluetooth and other important services.
View 4 Replies View RelatedI made the choice to reinstall Windows 7 after finding my pc picked up Trojan Dropper/Gen-C according to Superantispyware. After installation I disabled unneeded/unwanted services, one of which is Remote Desktop Services. I did this on the original installation with no glitches. With the reinstall, this particular service 'resets' itself to the default(Automatic/Started)after every reboot even though I disable it. I have to re-disable it every time. According to Task Manager, any remote services listed are still Stopped.
View 3 Replies View RelatedI want to know, what services can I turn off or disable to cut down on memory use and to lower the number of processes running on my laptop, but retain wireless and ethernet usage, audio and aero theme.Also, I want to know what in Windows 7 takes up about 800MB of RAM on fresh install? Again in a separate list, what can I turn off to cut RAM use down to about 200MB?
View 6 Replies View Relatedhow to remove unchecked services completely (DELETING) from the services tab in msconfig? Like Google update service and so on.
View 9 Replies View RelatedI bought a usb wifi adapter for my desktop and it would not work. Saying the service for it was not running. Typing services.msc would only give me an error "One or more ActiveX controls could not be displayed because either: 1) settings prohibit ActiveX 2) blocked publisher. Event Viewer also stopped running, showing the error "Event Log service is unavailable. Verify that the service is running.
View 3 Replies View RelatedToday, my computer just finished installing updates, and was waiting for me at the user selection/log in screen when I checked on it. I powered it off by holding the power button down to change some BIOS settings. (In the end, I did not save any changes to the BIOS, so I can rule that out) After rebooting and logging in, MSE and avast both tell me that their respective services have been stopped, and WiFi is not working either (its stuck as connected, but has the small yellow triangle in the icon, it says its identifying, but its been stuck like that). Other services, such as Dropbox and RocketDock have also been stopped on my computer.I then rebooted into Safe Mode with Networking. WiFi is still not working, and now, audio service is also stopped. From here, I uninstalled all of the updates that had been installed today. I then rebooted normally.Finally, RocketDock and Audio Service are running again, avast!, MSE, Dropbox, and WiFi are not still. I'm using Malwarebytes' and avast! to scan for crap that might be doing stuff (Malwarebytes' has already picked up four positives, both scans are still underway).
View 3 Replies View Relatedwhen I look through services.msc Wireless Zero Configuration is missing, how do you go about reinstalling this service in Windows 7 or can't it be done.
View 2 Replies View RelatedI use my desktop as a recording studio PC some of the time, and those DAW programs need a LOT of resources. That's why most of them recommend you install them on a seperate partition, and stop most of Windows' services.I don't want to install it on a different partition, What I'm trying to do is install it on a different user, but then just have that specific user NOT run a few services and startup programs.I could find a way to disable startup programs for a specific user, but I couldn't find a way to disable SERVICES for only one specific user. Services like "Task Scheduler", "Indexer", iTunes, AVG, TeamViewer, and many more that I do NOT want running on my studio user - but I DO want running on my every day user.
View 4 Replies View RelatedI just put together my first build and happy with the performance until yesterday. Normally in runs around 5% CPU with a temp around 30. Yesterday it jumped and remains at 30% CPU with a temp at 40 C. Used a program called Process Explorer to find out that the svchost.exe was using up 26%. It was broken up by the following services:
FDResPub
FontCache
SSDPSRV
upnphost
It seemed like all the services were safe and required for windows run. So I'm wondering why they were consuming all this CPU usage last week and the week before, and now the sudden change. What can I do to limit this?
I was having an issue with my print spooler resetting itself to the stopped setting and manual after each reboot or shutdown. I apparently fixed that one (however, not entirely sure how I did it). But now all of a sudden, I have another service doing the same thing. My Acronis Backup Scheduler service is resetting itself to Manual from a setting of Automatic and started after each shutdown and restart. It never had an issue until yesterday. No updates to that product was done in the last few weeks. It is the most current updated software for the product.
Is there anyone that knows why and how these settings can begin doing this?
Me and my girlfriend have a laptop we share, both accounts are Admin accounts how do I start services under her account and not global (both)I want Avira Anti-Virus to start under her credentials and not mine, now initially I searched online and found how to edit the service logon Tab so it started for her - which worked initially but meant I couldnt call on (start) the service without changing it back to global - after doing just that and changing back to her account it no longer worked - to get the program to work meant dropping the main tray app into startup folder for her and doing the afore mentioned tweak on service logon tab for two services related to the app, but that no longer works for some reason the services dont start - also i would like to be able to call on and start the service myself should I wish too (when I wish to use Avira Guard) - i even tried dropping shortcut to the exe files (that are the services) into her startup folder but this does not work...
View 3 Replies View RelatedDon't have the specified path to Bluetooth Media Service and Bluetooth Device Monitor in system services...It appears the programs are missing. Any Ideas how or where to get them back?NEW Dell xps 15 laptopWindows 7 Home Ulitmate 64 bit
View 2 Replies View RelatedI'm trying to find messenger.exe in services but I can't find. It uses for "Net send" Command in CMD.How I can allow it? or do anything like this in windows 7?
View 4 Replies View Relatedi installed windows 7 but didnt know u had to partition the hard drive the instalation got to setup services and restarts then it says that the hard drive is in bad condition but i cant open any options such as bios or setup only thing i can do is press f1 to resume which does same thing wit services setup then goes back to the black screen with f1 resume
View 1 Replies View RelatedNot sure if this is the correct place for this but...this morning I noticed an exclamation in my taskbar that services were not running. I looked for services.msc in the search in the start button, but nothing came up. I also typed in MSConfig in the search in the start button search, and again, nothing came up. I also cannot find anything that resembles "administrative tools" anywhere, The exclamation point has since disappeared and in the taskmanager, it appears to be working, but...why am I not seeing these items in my start button? Exactly what does services.msc do? I'm running the 64-bit Windows 7.
View 5 Replies View RelatedI have had this strange problem for a few weeks now and so far I can't figure out a solution or why it happens.
When closing an application, the application's service (in the Windows Task Manager) doesn't end with the closing of the application like it should. This is happening with 95% of my applications.
I'm resetting (from disabled) in msconfig. I had a glitch after installing sp1 that caused BSOD after login. After disabling startup and services i was able to login in normal (selective)startup. My question is whether the entire list of ms corp services need to be enabled or should i select a core set . I have been starting the ones I recognize and what not , but is there a windows 7 setup suggestion list or possible list of core services to enable.
View 6 Replies View RelatedI find that the extended tab of services.msc is blank in my Windows 7 installation. The entries can be seen when select the standard tab.
View 5 Replies View RelatedI am helping a friend who has a slow running windows 7 (32bit), quad 4 PC. I did a lot of tweaks to the machine - mostly aesthetic - but now I can't get her computer to to access the internet and the system restore is FUBAR.Here is what I did, in order:
~First I created a new system restore point.
~Then I found that she had Mcafee, Avira and windows defender installed, so I uninstalled McAfee and windows defender and rebooted - no problems. (I read that having more than one anti-virus can cause a slow PC)
~I ran super super antispyware and it found only a few tracking cookies but that was it.
~I then turned off aero themes and aero peek and snap.
~ I set her power settings to high performance because she likes to have a bunch of programs and windows open at a the same time.
~ I then went in to services.msc and disabled active x (she uses chrome), bitlocker, encrypt file systems, IP helper, microsoft iSCCI Initiator service, parental controls, remote desktop and configuration, smart card, media player network services.
~ I then went into msconfig and disabled a bunch of startup programs (itunes, quickplayer and the like)
I rebooted and everything was fine -- I went online and checked and things were great and the system was noticably faster. I then re-booted and there was no internet access and the network connection icon was missing. I checked and in msconfig, under services, and almost all of the microsoft services were unchecked. I tried re-checking the network information and some others I found via google, but after reboot they were still "stopped" - even though they were set to "automatic". I went into services.msc and tried to manually start them but got messages like "error 1068"Do I need to right click "run as administrator" when I select system.msc to make these start or since I was able to access service.msc without first selecting run as admin, do I already have administrator privileges?
I had a virus on my computer which I have since cleaned (and double checked with several scans). The remaining problem on the computer was an inability to turn on my windows firewall (though the McAfee firewall was running). I followed the steps at My link through step 14 (though I forgot to make the system restore point at step 13). Then my FSS log began to look different. Here is the copy of my most recent FSS log.
View 1 Replies View RelatedAfter disbling the UAC the coputer lost network connection. We noticed that the connection was completely missing form the Adapter Settings screen. We also noticed that most of the services are disabled and the ability to enable them is grayed out. We re enabled UAC but no help. This computer previously had the alureo-k root virus.It was working fine for 2 days until we triggered this.
View 1 Replies View Relatedway to restore Windows 7 services to their default setting automatically? I have tried manually setting certain services but they won't stay in the configuration I give them. For example, my Window's Update Service is set to Automatic-delayed startnfortunately, I can't run Windows Update and I get "the service isn't started" message.So,I try starting the service, it indicates started and same problem. I try resetting it to Automatic, hit the apply button and all is well. I restart the computer and it is back to Automatic-Delayed and Window's Update won't run..
View 1 Replies View RelatedI was wondering about the differences between Services and Tasks. From what I have heard, read about services in windows 7 it seems that they run in an isolates session (I think session 0) which does not allow them to perform certain tasks. For one application I know that they cannot access a GPU for instance...or thats what it seems.Are scheduled tasks the same in that even though you can run them under a user they run in this constricted environment? What is the difference between them?
View 6 Replies View Relatedwhat processes or services run on Port 80. I am trying to run XAMPP Apache virtual web server and Apache fails to start because a system process is listening on port 80. Apache needs to run on port 80. I had "thought" i fixed the error when I ended the service "web deployment agent service" (after realizing it runs on port 80), after doing this, apache started up just fine no problems. I restarted my computer, and sure enough, apache wouldn't run again. typing "netstat -aon" in a command prompt, sure enough again, port 80 was occupied by a process with a PID of 4...again. I open task manager, and the process descript is again, NT kernal and system process. I try ending the process form the task manager, and it will not stop.I have double checked services.msc and web deployment agent service is deactivated and not running. because of this i am perplexed as to what additional services would use port 80 just after a re boot.
View 2 Replies View RelatedI was browsing the internet a few days ago, onno other programs open, when Windows froze, and I had to hold the power button to shut it off. When I turned it back on, it wanted to run a disk check, so I let it. It performed many operations (which I can retrieve the logs of, if needed), but when Windows started up, it only brought up a black screen with a movable cursor. If you just let it sit there for several hours, it presented a BSoD.Windows worked fine in Safe Mode, so we ran several virus scans using McAfee (which we already had on the computer, the Security Suite), Spybot S&D, SUPERAntiSpyware, and whatever PCPitStop's virus scanner is. All scans were clean, except for several cookies. McAfee's scan never finished, and the scan stalled often, and it started locking up along with other issues (not totally sure what was wrong with it because my dad was trying to fix the computer at this point), so my dad uninstalled it. We then ran another disk check, and Windows started up normally afterwards.
(tl;dr: background of the problem, did several scans, no virus)Despite fixing that problem, I'm now having issues with some of the Windows services. At first, when starting Windows, only the Audio Service didn't start automatically. If I ran the Audio diagnostic tool, it would start the Audio Service, but that causes the WLAN Auto-Config Service and the Desktop Window Manager Session Manager Service to stop immediately, causing my wi-fi and Aero to stop working. If I tried to start either of those services back up, the Audio Service would stop again.I'm not sure what I did to cause this to change, but eventually the audio diagnostic tool couldn't start the Audio Service anymore. When I try to start it, my Aero and wi-fi stop working again, but the Audio Service still doesn't turn on.
If I open services.msc and start WLAN Auto-Config (wi-fi) and Desktop Window Manager Session Manager (Aero) manually from there, they both turn back on easily, but if I do that with the Audio Service I get error 1068 ("The dependency service or group failed to start"), and wi-fi and Aero turn off again.note: The faulty services are all set to Automatic, and have been this whole time.Since I hadn't scanned since my computer only worked in safe mode, I decided to scan with SUPERAntiSpyware again, then Malwarebytes. Both scans were clean.Because I get error 1068 when trying to start the Audio Service, I looked at the services it depends on, and checked them. All were in order except the Windows Audio Endpoint Builder, which was stopped, which explains the error 1068 I was getting earlier. When I try to start that service, I get error 1067: "The process terminated unexpectedly." Here's the log of that error[CODE]
this morning I noticed an exclamation in my taskbar that services were not running.I looked for services.msc in the search in the start button, but nothing came up. I also typed in MSConfig in the search in the start button search, and again, nothing came up. I also cannot find anything that resembles "administrative tools" anywhere, The exclamation point has since disappeared, but...why am I not seeing these items in my start button?
View 9 Replies View RelatedI am trying to install a certain software while the installation it say that it trying to stop services but after a while it say that an error was during the stopping services process and it complaining about privilege issues. The pc that i am trying to install is mine so i think i am loged as administrator and also i tried to run the setup file as admin and same error.
View 1 Replies View Related