I got a Dell desktop that won't power up. I've unplugged everything, plugged it back in, held down the power button...nothing. The amber light on the front just keeps flashing, even with the power cord unplugged from the computer.
I have put a SSD as my main drive. Running Windows 7 64-bit. I am now concerned that Windows 7 will wear this drive out as the drive light flashes constantly about 1-2 times per second. What could it possibly be doing sitting idle.
I have an annoying little problem when my computer is turned on the fans start but the green light in the front is just flashing. I can get it to boot if i push the other button which is set to turn on off sleep but it takes a random amount of times before it works. I'm wondering if reinstall of win 7 will do the trick.Tech Support Guy System Info Utility version 1.0.0.1OS Version: Microsoft Windows 7 Professional , 64 bitProcessor: AMD Phenom(tm) 9950 Quad-Core Processor, AMD64 Family 16 Model 2 Stepping 3Processor Count: 4RAM: 8191 MbGraphics Card: NVIDIA GeForce 9400 GT, 1024 MbHard Drives: C: Total - 305242 MB, Free - 146202 MB; Motherboard: BIOSTAR Group, A740G M2+, 6.0, None
I've been noticing after re-installing Win 7 that I get random floppy drive seeks and the hard drive light flashes like crazy and then everything is fine again.I have Clamwin AV,Spyware Blaster and Spybot S&D installed,but that's it,no Windows Defender or Essentials AV.Any ideas what causes this? It's a minor annoyance,but I just want to make sure it's not damaging anything.Also would Readyboost help me? I've got 2 gigs dual channel PC3200 ram(or I could go with 2.5 gig single channel PC2700)and a P4 at 3 gig until I can afford to upgrade my comp.This is my first post in quite awhile so I hope this is in the right place
I have a new Dell XPS 8300 desktop still in the box with a HDD pre-installed with Windows 7. Since it was not a customization option at the time of purchase, I would like to install a new SSD to run Windows 7 and a few important programs that I will load in the future. There are currently no programs or data on the existing HDD that I need to transfer other than the OS and the drivers that I need to make the computer work. I would like to avoid messing with cloning and adjusting partitions if possible.Eventually, I would like to use the HDD as a secondary drive where I can load non-essential programs and store larger data files.Based on what I have read on numerous threads, the following is the procedure I intend to use. Please let me know if I am missing any steps or if I am doing something that will not achieve the desired result.
1) Turn on computer with the HDD installed as-is and the SSD still sitting in the box.
2) Use Dell�s DataSafe Local BackUp to create a System Recovery Media on either a DVD or 8+ GB USB key.
3) For a belt and suspenders backup, next I was going to use the Windows 7 feature to create a system image found at Control Panel -> System and Security -> Backup and Restore. I am very conservative and would like the option to start over if I mess anything up. I was planning on saving the system image to the existing HDD and to a either a DVD or external hard drive. I am not exactly sure how large this file is and where I should store it.
4) Restart computer and enter BIOS, and change the SATA mode to AHCI. I assume this should be done before installing the SSD. Power down computer immediately after.
5) After powering down, I was going to unplug the HDD power cable and unplug the connection of the HDD to SATA Port 0.
6) Install new SSD in a free bay and connect power and cable to SATA Port 0.
7) Restart computer with System Recovery Media (from Step 2) already in either the DVD drive or plugged into a USB port. I assume the computer will automatically boot from the System Recovery Media, but I realize I may need to enter BIOS (or some other system menu) to tell it to load and install Windows 7 from the System Recovery Media. Can anyone fill in the blank here so I know what to expect?
8) After Windows 7 has been installed, will the System Recovery Disk automatically install all of the device drivers that originally were installed on the system�s HDD? I have a device drivers disk from Dell but was hoping this would be accomplished by the System Recovery Disk?
9) I am assuming after Step 8, that the computer will function and look the same way as it did at Step 1. This may be a little na�ve. Is there anything I am missing?
10) I was hoping that Windows 7 would do a good job of automatically adjusting the system for the SSD, so I was going to not fool with the tweaks that everyone is recommending. Are there any tweaks or setting adjustments that I have to make to allow the SSD to function properly? Optimum performance is great, but I don�t want to risk standard performance by messing things up after I have come this far.
11) After verifying that everything is working properly, I was going to power down and then connect the existing HDD to power and an available SATA port.
12) Reboot the system, and magically the HDD will be listed as an E drive that I can store data files and load non-essential programs on. I actually assume it is not this easy. Do I need to uninstall Windows 7 on the HDD or delete the partition and reformat? The less the better, but I don�t want to create problems with conflicting drives.
I have a dell desktop less than a year old. It suddenly refused to start today. There was nothing new added from last shut down until start up(that didn't start) I have no idea where to start since I am useless with computer issues. Any ideas to start? I did run the start up repair...useless.
My new Dell computer came with what looks like an extra taskbar at the top of the Windows 7 desktop, although it's bigger then the taskbar. Was there from the first time I turned on the computer. It's disappeared with no explanation.
I've spent over an hour looking at Windows 7 desktop screen captures and tutorials, and can't find anything that looks like it, and almost all other photos I've seen of the Windows 7 desktop don't have it at all.
I'm guessing this is something that the Dell OEM version of Windows 7 uses? Is it even part of Windows 7 or is this something from Dell? I'm not even sure what it's officially called, and don't know how to get it back.
The closest photo that explains what it looks like is attached. In that photo, it looks like someone took it and made it into a circle, but on my Dell computer it was on the top of the desktop in a straight line.
I have a Dell Desktop that had vista and I replaced it with Windows 7 and now when I go to turn the computer off it will not shut down.I have to manually hold the turnoff button and hold it, then it turns off and about 30 seconds later it will turn back on, then immediately shut down.
I just need your expert opinion on this matter before I call Dell back. Apparently my Hard drive went out on my new computer (6 mos.old) and, I guess a possible Motherboard problem as well, because the Dell tech told me they were sending a Hard drive & a motherboard to a service tech near me. Anyway, the tech came out with only the Hard drive. When I ask him where the Motherboard was, he didn't know anything about a motherboard.Dell did not send him one. He went ahead and installed the Hard drive & every thing seems to be working fine now for 4 days so far. My concern is, do you think my computer would still work ok if it has a faulty motherboard too? My warranty will be up in about 6 months & just want to make sure. I have a message to call Dell back & let them know how my service call went, but Just wanted your opinion before I do. Should I insist on a new motherboard?
How can I improve the start-up time on this brand new Dell computer? It takes almost 2 minutes before Windows 7 even begins to load. Something is clearly wrong. There are hardly any devices attached ([printer, wireless mouse & keyboard, and an external hard drive for back-up), and no bells and whistles at all, not even a word processing program yet
I've been away from the PC world for the past few years because I've been running a Mac.I decided to get back into some gaming on picked up a Dell XPS desktop running windows 7 ultimate x64.I bought a Asus USB N10 Wifi Adapter and it won't connect to the internet. It gets a limited activity logo over top of the connection. Today I tried plugging it rite into the router with a LAN cable and still, no dice. Came up with an IP address error.I'm guessing this is a router issue? When i run ipconfig in cmd prompt, it doesn't even have a default gateway?
I have difficulty of upgrading my Dell Dimension 5100 Desktop from Windows XP to Windows 7. Any hardware parts that I need to upgrade in order for me to upgrade my OS?