I've searched the tutorials and the forum and couldn't find anything on the following, Is there a way set a schedule for sleep mode? I would like my system to go to sleep at 11:00PM and awaken at 6:45AM 7 days a week. If so, how is it done?
View 4 RepliesI am currently building a custom desktop (Specifications in My System Specs) and I've run into a few problems along the way:
- When I first put it all together and powered it up, the edge of the motherboard literally caught on fire for a second and I immeadiately turned the power off.
- I returned the motherboard and the psu and got both brand new again.
- I just tried to reinstall the motherboard and psu and now I get no power at all to the pc.
- I checked all connectors to make sure they were plugged in tightly and correctly. Everything looked fine. The 12V atx power connector and 24-pin connector were both plugged in correctly.
- I checked the psu with a paper clip and checked the voltage of each pin that should have been outputting voltage. Everything was fine there. And the psu powered up and the fans turned as soon as I pressed the switch.
- Checked for bad heads on the motherboard. None.
- I also went through all of these steps already: PERFORM THESE STEPS before posting about POST/boot/no video problems! - New-System-Build - Homebuilt-Systems
Under Power Options in the control panel, the plan settings for My Custom Plan 1 are for the display to turn off and the computer to sleep after 2 hours sitting idle it is not working.I tried bumping it to an hour for each and it still does not work.
View 8 Replies View RelatedHow to Create or Delete a Custom Power Plan in Windows 7 ?
View 0 Replies View RelatedIs it possible to hack that button so you could, say, launch a special "locking" program instead of loggoff, shutdown, or any of the other options?
View 1 Replies View RelatedWindows 7 shuts down my sound system after about 2 minutes. I can see the LED on my A-L speakers turn off. Any sound will wake it back up but if it's only a ping it doesn't wake fast enough for me to hear it. This didn't happen with this same hardware on Win2k (I skipped XP and Vista).I went through the Advanced Power Settings but under Multimedia I don't have an option for sound.I'd rather not disable power saving completely, so I'd like to find a way to prevent the sound system from going to sleep at all.
View 7 Replies View RelatedMy system specs are updated. My power setting quit working a few days ago. No matter were I set sleep mode or power monitor down, it never does. Not sure why? I've performed an sfc/scannow with no errors. Nothing has really changed in my system recently except my vid card driver. I can't say that caused it, but I rolled it back just in case with no change.
View 9 Replies View RelatedMy brother set his max cpu rate to 30% in power options. He says it saves power on his notebook and the batteries last longer. I told him thats a bad idea. But he dont listen to me.
View 3 Replies View RelatedI have a Dell XPS 15 and in Windows 7 Power Management, I am trying to set it to "Do Nothing" when I close the lid. The option is there and I am set to "Do Nothing" but closing the lid shuts off display, network connection, etc. In addition, I would like it to not shut off my network connection when it hibernates as when I log back in after the hibernation, it takes several minutes for the wireless network connectivity to return.
View 3 Replies View RelatedI have all my power settings to never go to sleep and when I leave my computer on unattended for about 20 minutes I come back and see the password screen. That may be ok as long as I don't lose any work in progress, but I would like to control this or at least understand it.
View 3 Replies View RelatedThe power options settings in the first option shows a strange language...I dont know exactly what it is. Can anyone explain to me this and how i can change it to normal?
View 2 Replies View RelatedI use Performance mode, and set it to NEVER turn off ANYTHING, including the monitor.I hit apply, etc etc.It will hold this setting for a while, then after a reboot, or turning off at night, it loses this setting, and reverts to turn off monitor after 20 minutes.Why is Windows 7 doing this?
View 9 Replies View RelatedI am running Windows 7 7000 x64 on a quad core intel box. Most things have been working great but I have been having one annoying problem, the screensaver won't start, and neither will the power saving settings (i.e. turning off monitor, computer sleep)
Basically I am wondering if anyone else has had a similar problem and figured out what software or hardware could be causing it or if anyone knows of a tool to check what input is keeping the computer out of the idle state.
My laptop connects to my desktop wirelessly allowing me to watch stuff stored on it and do other things. Recently, I started using the power settings so that after 30 minutes the computer goes into one of the sleep modes at which time access is shut off to the laptop. Is there anyway the laptop can prevent the power settings from taking effect when it is already connected?
View 1 Replies View RelatedRegardless of the interval I set in Power management, the screen always dims at 20 minutes and the machine goes to sleep at 30 minutes. Always, regardless of setting. [Windows 7 Pro 64-bit SP-1]
View 6 Replies View RelatedHow to Change the Power Plan Settings in Windows 7 ?
View 0 Replies View RelatedI have my power plan set to Energy Star with display brightness set around 40% when on battery and 100% when plugged in. It seems to get reset periodically to the default which 40% for both battery and plugged in. I haven't been able to reliably reproduce the problem but every few days the plugged in setting gets reset to 40%. Is this a known problem with Windows 7?
View 4 Replies View RelatedHow to Restore the Default Power Plan Settings in Windows 7 ?
View 0 Replies View RelatedCompany laptop, with admin access The group Policy overrides the Power Options settings when I connect via VPN. Is there anywhere in the regedit to override or stop this?
View 1 Replies View RelatedMy Netbook power profile has these battery setting:
Level: Battery action/Plugged In
Critical Level: 5%/5%
Critical action: Hibernate/Hibernate
Low Battery Level: 7%/10%
Low Battery Action: Nothing/Nothing
Reserve Battery Level: 5%/7%
Reserve Battery Action: N/A
If I leave the netbook on battery and go to sleep/go out/whatever, when I come back it will be off. After plugging it in and powering it on. It will say it is resuming windows, and then I get the "windows has recovered from unexpected shutdown" after Windows is started. I'm not having any problems with Windows, but this message is annoying. Theoretically when the battery hits 5% remaining, windows will gracefully hibernate and I can resume it without any problems.
Is there a group policy to lock down the brightness settings that are normally configured into the control panel power options? Or alternatly, can I force these back to particular settings by saving and restoring regsitry keys upon user login?
View 1 Replies View RelatedI have set the Power Options>System Settings - Define power buttons (When I press the power & sleep button) to "Do nothing", yet i can still shut down my desktop via Start>Shutdown and by pressing the physical power button.
View 1 Replies View RelatedThis week (possibly after an automatic upgrade), my Windows 7 PC changed its sleep behaviour. Previously, it would emerge from sleep mode without going to the login screen. As of ~4 days ago, it now does.I double-checked Power Options' Advanced Settings. For every power plan, "Require a password on wakeup" is still set to No
View 5 Replies View RelatedI've done a lot of searches using variations of the above title and came up empty or just plain missed the answer.I'd like to know, if it is not asking too much, the following points:
1. What exactly is the function of Link State Power Management in the Power Options Advanced Settings, PCI Express?
2. What are the implications of using the options available:
a) Off.
b) Maximum power savings.
c) Moderate power savings.
d) Which option is the best selection for my Dell laptop.
I use my PC for audio production and I have a few external controller devices that are USB powered, for example a midi keyboard. I recently had to build PC due to a theft....long story short after building the new PC I've noticed that my USB buses have continual power to these external devices after I've powered down the PC. My old windows 7 PC did not do this. Is there a setting I can change to shut off power to the USB buses when I power off the PC? Or is this a hardware issue?
View 1 Replies View Relatedi've tried to set the option for pressing the power button to 'Do Nothing' so no body can shut the computer, and yet it shuts down by pressing the button, so why is that and how can i work this out?
View 1 Replies View Relatedwindows 7 desktop settings changed my customized settings after logging on..
View 5 Replies View RelatedOver the past 2 years my PC has been afflicted with random power off/power on/reboot events.It will go for months without these and then have multiples of the events in a day. (I had 8 of them 3 days ago.)I assume I have a hardware problem, but nothing has been found and I'm grasping at straws.The time between power off and power on is several seconds.I had assumed this rules out a software cause, but maybe I'm wrong. I know Windows can schedule a power off, but can it tell BIOS (or something) to power back on in a few seconds?I know blaming the power supply is a much more simple explanation, but then I'm left with explaining the intermittent nature of the failure.
View 9 Replies View RelatedFrom many days the battery icon is missing from the taskbar, the notification icon is greyed out even if the laptop is not on AC. i followed the the tutorial System Icons - Enable or Disable but nothing happened.
View 3 Replies View RelatedNow, just 3 days ago It started the BSOD issue.I realize that my GPU was the cause of this issue. When playing games or open 3d applications the temp goes 30C to 72C (In 15 seconds) then 82C - 85C constant (in about 30 seconds).Now I've been using MSI afterburner to check my temps and at fulload my GPU will be at 62-72C max temperature but now it's 10C even higher then before. No, I haven't fiddled with the voltage I set the GPU voltage to 1.037v which is the safest (been running this almost 8 months!). The GPU is the GTX 560ti.Is there a way to set the GPU on default settings or reset GPU settings in cmd or other professional way. I have uninstalled the drivers, uninstalling GPU, disabled GPU, disabled PCI-E slot and so on by using device manager and the issue still persist. Yes, I also have clean the GPU perfectly and still the temperature goes up to 82 seconds at 30seconds-45seconds. Yes, I have checked everything is set correctly and so on, I am a PC Tech.
Is the GPU damaged? Yes I have looked at this thread: Stop 0x124 - what it means and what to try Mainly, I know its the GPU straight away, I tried checking old drivers, new drivers, another GPU overclocked software such as GPU tweak and EVGA Precision. I am thinking it's the GPU is damaged or the PCI-E is damaged (I have another PCI-E slot on my system and the issue still there). It might be the PCI-E frequency? but it's set to 100 which it meant to be, I just hope is software related because I don't have the money to buy a new card. Did the dump files help?
My computer wouldn't shut down, even with holding in the power button, and so I just let it run out the battery. Then it wont turn on. I tried holding down the power button to clear out any charge that might be remaining. I have managed to get it back on, but I have to make a connection at the clip where you plug the power button ribbon into the mobo. Also, this is the second time I have had to do this. The computer works fine afterwards...or seems to anyway.
View 1 Replies View Related