I just bought a new Clevo P150HM about 2 weeks ago. Since then, I've played Shogun 2: TW (with DirectX 11 enabled), NFS: Hot Pursuit, Rage, Crysis, CoD: MW2 and Mass Effect all without problems. In the first couple of days, I also ran 3DMark06 and was able to go through the whole test without any problems.Recently, I tried running 3DMark11 and for some reason, it wouldn't start. I'd see the little blue circle next to the mouse spinning a little bit and then it'd disappear and nothing would happen. A quick look in the Task Manager shows me that it's not running at all. I then tried PCMark Vantage and the same thing happened. Then I went back and tried 3DMark06 and the same thing is happening with that too now. I've tried uninstalling and re-installing the programs as well as uninstalling my GFX card drivers as well as doing a Driver Sweep and then re-installing the drivers but still the same thing. My games still worked fine though.But now I've just installed Crysis 2 and it appears to be having the same problem. All my other games are working fine though. What could be causing this? I have DirectX11 installed as well as the latest Catalyst drivers installed. [code]
So having recently installed my new 5870 video card I was quite eager to start running some bench tests and checking out the results.
Initially I booted up Crysis Warhead and Flight Simulator X for a quick run and immediately noticed a drastic improvement with this card. Crysis was on FULL settings and didn't even flinch during gameplay.
Windows WEI improved from 7.4's to 7.8's on graphics (previous card was nvidia Evga 9800 GX2)
3d Mark Vantage on the other hand has got me stumped. My numbers are WAY lower than expected as they are showing way lower than with my 9800 GX2?! Also, the CPU score is coming up as one third of what I was getting before and I haven't made any changes to my CPU!
I suspect that this is a software problem with 3d mark, since everything else showed signs of improvement but can't understand where the issue lies.
I am running Windows 7 x64 & ATI 9.10 Drivers for 7 x64
Attached are screenshots from vantage after tests before with my old card and now with the 5870. The attached GPUZ shot on it's own is of my current config as well.
PS - the total score of my before pic shows '0' by accident, I believe I reset it at the time by mistake but the individual scores beneath are still valid.
My little brother purchased Windows 7 and did an upgrade install without doing a fresh install. He lost all of his old game installs and now isn't able to play any of them. We found the folders in windows.old, but none of the games are working. We are trying to get Crysis to work and looked in the registry for the serial key and we couldn't find it. Why couldn't windows have found a better way of doing the upgrade install?
Before the problem, here are the specs: I have 6870 CFX6GB 1666 MHZand I7 965 ExtremeI have Crysis 2 (original, not skidrow not reloaded and etc) and it worked great 2 months ago. Now I want to play it again and this is what I get, but 25 times worse:[URL]
Toshiba Satelite i7 3D Q series.Crysis & Crysis Warhead tend to overclock my hard drive to the point of freezing both screen & HD. It works on HP Presario 700 fair. Tried everything but, it seems that it wants to use the HD to process and not the pagefile, and that, I can't even find in the files. Everything else runs normal. Checked using Performance program. I know Directx10 is a pain but, my diagnosis using DXDiag says that it uses DX11 & I have a large pagefile?Hid the fxc files for the program so as it could not use them but, again, it still suffers the same fate?
Got a random BSOD playing Crysis last night, this error only occurs in Crysis, no other games. Had every setting on Very High which was putting a high load on the PC.
PC Specs:-
ASUS Sabertooth 990FX Motherboard 750W True Power Modular PSU AMD 1090T CPU 2x MSI Radeon R6850 Power O/C Edition (in Crossfire) (12.1 Preview Drivers) 2x WD50000AX 500GB HDD SYNAPSE CACHE 64GB SSD Windows 7 x64 Ultimate Edition
Game was working fine 2 days ago when I last played. Now it starts up as normal but when I load the level where I left off it freezes at 82%. Error message says AppCrash etc...
I tried starting at previous levels but they don't work either. I haven't running any scans or anything so I can't think why it went from working fine to not working?
After I updated my Windows 7, I clicked the Crysis 2 icon and the message popped up: ""crysis 2 (TM) has stopped working." I believe it's something has to do with the update preventing me to play C2.
First off lemme give you a few specs of my computer in case you can determine right off what the problem is
Gateway - model GT5656
AMD Athlon 64 X 2 Dual Core Processor 6000+ 3GHz
3GB RAM
GeForece 8600 GT graphics
Wide screen HD monitor currently at 1440 x 900 resolution
Okay now the problem is when i play Crysis even on MEDIUM i get laggy/choppy gameplay and i checked the fps (this was a long time ago) i don't remember what they were but just that they were skipping around. I don't know that much about gaming but i figured more ram might help, plus i wanted more ram regardless because my downloads are only like 400kb/s.
I already ordered enough ram so that my total will be 6GB. Yes i know that i will have to take the other stick out bla bla bla i already calculated that. I'm not 100% sure how good quality it is but this is what i bought: 2GB PC4200 533MHz DDR2 SINGLE STICK 2GB PC-2 4200 RAM - eBay (item 130315129371 end time Jul-26-09 01:02:12 PDT)
Anyways getting to the point, tomorrow i will have enough to buy another one of those to have a total of 7GB ram is it worth it? will a 1GB increase even help that much? (and yes I'm running 64 bit)
When i start playing my crysis 2 after 2 minutes my pc hangs and starts showing colors. Other games like fifa 11, mafia 2, brink, crysis warhead, crysis, gta4 work perfectly fine.
like the title says I have a problem with Crysis 2. I installed the high textures and the dx11 pack. As I started the game my screen went black and I saw a blue box on my screen saying: "Frequencies are not supported". I only can window the game and then I can see the game normaly. I can't play the game in full screen when I enabled dx 11.
So ive been getting the black screen with movable cursor lately and have tried many a methods to remove it i tried checking in my event log for something, and this is waht it said "The following boot-start or system-start driver(s) failed to load:dtsoftbus01" So what does this mean and how can i fix this?
Monday couldn't boot up PC, had to go to system recovery and restore to previous day.
Log files show below that 4 things failed to load. Tuesday couldn't boot up PC again.. tried to restart like 4-5 times.. Finally comes up and in the logs there's numerous things that failed to load. Running a sfc /scannow right now.
I found corrupted system files, but it appears that the hard disk is fine. executed chkdsk and no bad sectors.Just looked into this on event viewer-The following boot-start or system-start driver(s) failed to load:xsoaynmfmfxpefxbozedltnzvijcvI am running Acer Aspire X3950-U3022 with Windows 7 Home Premium Home Edition.
I'm not sure where to even begin to fix these problems. Some online searches suggested doing a system repair but I want to get some more feedback here before proceeding.Here is the message from the event log:The following boot-start or system-start driver(s) failed to load:
AFD cmdGuard cmdHlp CSC DfsC discache ElbyCDIO
[code]...
I realized some of these are not Windows 7 related but most are. While the computer "works", I do experience frequent reboots and freezes. Perhaps some of these driver loading failures are part of the cause of my issues.
When i got home today didn't my computer work, my girlfriend has been the last one using it. So don't know how things were just before the shutdown or anything.when i turn on the computer i get to the screen where "touch bios" is and where i can see the options like Bios settings, boot menu, xpress recovery.but i cant press anything, and after about two seconds on that screen the PC shuts down again.The keyword lights up so there is a responds on it, but just doesn't work to press anything before it shuts down.I've got BSOD upto several times a day for a few months time.believe that my computer is affected by some virus or something is delaying my computer. might be an combination of several things.I got no external things hugged up to the stationeer computer right now.it is a windows 7 x64 machine. usually when i get issues i can access advanced boot up or bios, but can neither in this case..I wonder if it might be a hardware issue.
When I start up my computer, my Steam starts up, then I manually start Chrome. Chrome comes up fine, Steam does too, but when I try to right click on Steam and click friends, all it does is create another steam process running at 100-108 K. Then if I close Chrome and try to reopen it, it will do the same. This happens with EVERY program after I start up. There's a 5 second window where I can open programs without issue, then after that it will only start 108 K copies of them. It takes me around 30 restarts just to get it working properly, if not more.
I have a video card that used to boot up in windows 7 - but know this computer with a GeForce 9500GT video card boots up with the Vista boot up logo.I found out this was the video card because I have another card with another GeForce video.I took the swapped the video cards, and the indication changed. The original computer booted with the windows start up screen. And the test computer booted up with the vista boot up screen.
I was told by a local computer repair facility this had something to do with video drivers.I tried what the organization suggested and uninstalled all video drivers (I used generic Windows 7 Video Drivers).Then the organization recommended downloading the latest video drivers for the GeForce 9500GT.This video card has 512GBytes of memory. I did this.Then I was told to install the newly downloaded video drivers.I resrted the computer with the Vista login screen with windows 7 operating system,and the vista login screen was displayed.
Last night I was on my computer and then I shut it down. Today when I came home from work it keeps saying windows failed to start. I tried hitting f8 and loading to the last good configuration doesn't work, safe mode same thing, repairing nothing, so my last resort was my windows 7 cd. So I went into bios and made my configuration boot from cd/dvd popped it in and restarted, a black screen came up saying windows is loading files, then the windows 7 menu came up, picked my language, next, and first I tried repair my computer, I get the little circle meaning its loading for like 5 seconds them it does nothing, rebooted again but this time I chose, install and I've been on the setup is starting for like 20 min. And forgot to mention, when it boots seem like it does good then comes to the screen where it says windows failed and gives me two options repair our start normal, if I pick repair it just reboots and start normal takes me to like the pick your user screen but its just blank no users, so I can't even restore our access the computer.
1. Which DLL uses W7/64 for the sound at start-up of Windows? I would like to edit it for my own sound.
2. How can I alter the sequence of the entries in the Start-menu? Now the sequence is in sequence of creation, I would like to group them by application-area.
I have an error that system32/hall.DLL is missing so I put in my windows 7 DVD ( I Have 4 DVDs for my windows, gateway, I always put the first one) so I could start start-up repair but when the windows files is loaded it keeps starting recovery mangment which gives me options to recover my hard drive to factory defaults (ie delete files on c and reinstall windows) ,why I don't get options to choose startup repair, how can I get it to start start-up repair?
My laptop freezes when i turn it on after a minute or two just enough time to maybe sign in but i can go into safe mode and it wont freeze but you cant do anything in safe mode that
My dell n5030 laptop isnt getting past the windows start up screen. It boots up fine up to the part where the four balls become the windows logo, but then freezes there everytime. When i try to select the windows start up repair it blacks out the screen and I cant do anything.
I know its not a faulty hard drive because its newly fitted and this problem occured previously on a different hard drive aswell.
using windows 7, have a blue screen at start up issue, memory dump. Sadly the PC wont start so unable to try too much, it lets you select user, attempts to ,log onto the user then just goes to mthe blue screen and starts the cycle again. It will not start in safe mode either, basically the same result although sometimes it loads and you are in but when you try to do anything it goes to the blue screen again. I did get the error code (not always the same on the blue screen but this one comes up most time), "driver IRQL not less or equal"
The problem that i am facing is that, my windows 7 search is instantaneous but when i click on the application the application takes time to load but if i run the same application from Desktop it will load immediately. This happens only one first time after bootup.
I have Windows Ultimate (x64).I use the Asus Suite II supplied with my Asus Asus P8Z68-V Pro Gen3 Motherboard (which I like for fan and temperature monitoring) Ai Suite II always loads BUT "on screen" it is messy during loading because a seemingly AI Suite bar sized white artefact appears top left of screen for 10- 20 seconds before disappearing when the AI suite icon appears in the notification tray. Sometimes a white square also appears temporarily.I have noted that if I exit Ai Suite II and reload via the Asus AI suite supplied Shortcut I never get these artefacts AND the suite loads instantaneously (I note however Asus uses AI Suite II.exe via the shortcut but via the Asus installed Task Schedule it open via "AsRoutineController.exe -open"I have also tried unloading AI Suite II and AsRoutineController.exe and loading AsRoutineController.exe and it too loads cleanly and almost instantaneously.
1) Why does Asus use the Task scheduler instead of loading via the normal Windows Startup procedures? 2) Could it be so each can be easily disabled if required) and is that the ONLY reason? 3) what is the -open switch in the command line? 4) Is there ANY good reason why I should not disable the AI Suite II in the Task Scheduler and add it the the Normal Windows Startup applications I use the Free version of Startup Delayer as it has served me wonderfully with my current Win 7 O/S (and my previous XP) in ensuring all desired Notification Tray Icons display EVERY time).
Today I PROVISIONALLY made the change and AI Suite II opens cleanly (as other Startup apps) without temporary white artefacts and with no noted side effects so far. I am nervous however, to make it permanent without advice from knowledgeable Seven Forums members on this subject
I have an Acer Aspire M5811 running Windows 7 - 64 bit. When I tried to start my pc tonight I ended up with just the desktop wallpaper with no icons or start menu.
I tried to reboot in safe mode but the pc became unresponsive. I also tried using the system restore disc but again nothing.
Yesterday, the task bar and Start button mysteriously disappeared.I've also found that the "Taskbar and Start Menu Properties" windowdoesn't come up. There are two places to click on in Control Panelthat should bring up this window, but it doesn't. The Control Panelborder changes color as if something is starting to happen, but thennothing happens, possibly indicating that some program starts to runbut then finds something wrong and exits. I didn't see anythinginteresting in the error logs. The desktop icons appear normally.The problem exists only when logging onto my son's account. When Ilog on as administrator, the task bar and Start button appearnormally.The usual tricks don't work: Ctrl+ESC, or bringing up Task Manager andtrying to rerun explorer.exe. I tried sfc to check for corruptedfiles, but none turned up. I ran an AVG scan and it did find one fileit considered a threat, which it removed, but that didn't solve theproblem.
I found a web site that referred to the registrykeyHKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesExplorerwhich has a NoSetTaskbar value that can be used to disable the"Taskbar and Start Menu Properties" window. On the administratorlogin, the Explorer subkey is there all right, but doesn't haveNoSetTaskbar. (It does have NoDriveTypeAutoRun.) But when I log ontomy son's account, the Policies key had no subkeys at all. I triedadding an Explorer subkey without adding any values, but this didn'tsolve the problem. I haven't yet tried adding a NoDriveTypeAutoRunvalue, but since this seems to pertain to AutoPlay it didn't seemrelevant to this problem.Any thoughts as to what might be going on or what might fix it?
