I've recently installed Windows 7 Ultimate x64 Beta Build 7000 and I have Comodo Firewall 3.8.65951.477 64-Bit installed as my firewall. I get this problem that I can't solve at all .
When I click on " Run Diagnostics" I have this :
Indeed, I click "Yes" and this is what comes next :
PS : The Windows 7 Firewall is desactivated!
Anybody haves an idea on this problem, please ?
have successfully installed comodo 3, by setting the installer as vista compatibility.
i ran kapersky for a few days, but was fedup with the mass onslaught of program access queries.
i am having a slight problem with the firewall side of comodo: i know that it works when i can the 'stop activity' button and it shuts everything down, but when running leak test, the firewall does not respond, i have it on safe mode.
the incoming/outgoing monitor also shows no connections, could this be the problem? the program not communicating with windows correctly?
Is COMODO firewall compatible with windows 7?
View 9 Replies View RelatedThis happened after I installed Comodo firewall. I'm not sure if that is relevant though. Anyway, I tried running the command "sfc /snannow" in the command prompt (in admin mode) but to no avail even after I restarted the system. Also, I can no longer create a system restore point manually. Which when clicked "create a restore point", they will show me these errors.
View 9 Replies View RelatedRecently had a virus infection and noticed that the windows firewall service is missing. When trying to reset to recommended settings by using control panel received error code 0x80070424. Cannot access other computers or shared files/folders on home network. Saw a previous post dated 12-17 that appears to be the same problem.
View 14 Replies View RelatedI've got an Asus P5W DH Deluxe mobo, which has dual Gigabit ethernet and 802.11g wireless onboard.
I'm using the wireless for my Internet connection - which works fine.
However, I also have a crossover cable plugged in to one of the ethernet cards, which I'm trying to connect to my laptop (Macbook) - so I can map a drive to transfer a large file over to it.
In Windows I've manually set up the LAN adapter and defined the IPv4 address: 192.168.1.2
Subnet mask: 255.255.255.0
Gateway: blank
Then set up my Mac in a similar way (but using 192.168.1.3).
Tried pinging the PC from the Mac and received no reply. Figured it would be the Windows firewall...so switched that off. Still no reply.
I used to do this in XP without any problems at all, so there's been some networking change that's affecting this.
The network connection is defined as "Unknown" and I'm not able to change it - would this setting result in my not being able to even ping the box?
PS - I have also plugged in a NAS box using the same cable and connect TO that FROM my PC (mapping a drive) without any problems...so outbound network traffic appears OK.
Usually I disable Windows Firewall because it's annoying to hit "allow" every time i run each of my 30-40 games for the first time. I use avast! and nothing else, since I usually don't visit "adult" sites or anything out of the ordinary. I was thinking about getting zone alarm, though.
Well I need network printing to be enabled for the rest of my family to print without having to kick me off, but for network printing to be on windows firewall must be turned on. Is there a workaround, or do I just need ANY firewall turned on, not just Windows Firewall?
I was once using bitdefenderTS2009, but then I uninstalled it and now I'm using 'Kaspersky Technical Preview for Windows 7'.
When I'm using Snipping Tool to save screenshot for my post at 'show your WEI score' thread on the forum I noticed this (see attachment)
I guess those are some leftovers from imperfect BDTS2009 uninstallation process. Any suggestion on how I could get rid of those?
For you know, I also have used the Uninstall Tool I got from Bitdefender website successfully.
I've tried both Comodo and ZA firewalls. I prefer either over Windows 7 built-in firewall. The problem I have is after installing either of these I have control issues with Network Discovery and File Sharing. More exactly, even though the system shows these two items are off and/or disabled (manually), Start> Computer> Network will start showing available computers to connect to, whereas, Windows 7 firewall will inform me that both items are turned off. I use a public WiFi so this is obviously not a good thing. How to deal with this 3rd party firewall/File Sharing issue? Is the fact that the 3rd party firewalls are blocking any connection attempts a sign that everything is okay? Or should I just stay with Windows 7 firewall?
View 2 Replies View RelatedI am using kaspersky internet suite and disabled windows firewall. The problem is that turning the windows firewall off turns the pulic/home file/printer sharing and network discovery on.Turning on or off these settings starts the firewall.Disabling the firewall service permanently allows file sharing and network discovery for both public and home network,which cannot be turned off.I tried uninstalling kasperksky but nothing has changed.
View 1 Replies View Relatedi want to ask something about my LAN connection, i use Laptop with windows 7 64 bit as my operating system, and i want to connect it with my PC to share file and play together using LAN, my PC use windows XP as the operating system., how to set IP, firewall, etc?
View 2 Replies View RelatedWhat firewall are you all using?
I have Avast! antivirus, I tried to install Comodo and Zonealarm as firewalls but both installs failed.
All the programs from yupptv are not played properly. Every 5 sec it is breaking and comes back when you move courser after 30 seconds.
View 1 Replies View RelatedWhenever i plug in my ethernet cable my keyboard stops working (g19 logitech). I can see the lights on the keyboard and screen but it stops functioning and i have to unplug/replug usb for it to be back to normal.
View 1 Replies View RelatedI am having problem with windows 7 firewall settings. I get a notification from Action center which informs me that my firewalll is off. How can I on and then off the firewall whenever I start my system?
View 1 Replies View RelatedI have 2 computers connected with Wireless network,with Virgin Braodband Router.I understand this has its own firewall turned on.So do I need to have another firewall installed on the computer?THe windows firewall is always torned on, Windows 7.
View 2 Replies View Relatedafter I installed RC 7100 the firewall used to ask me if I'd like to allow a outbound connection for every program that would try to connect.
Unfortunately it doesn't do that anymore. In the Windows Firewall Properties I can only chose Allow or Block Outbound for the different profiles. If I set it to block, it will silently block all outbound connection attempts.
I want to have it blocked by default, but I don't want to have to create rules manually for each program, I'd like the original behavior, that is, have it ask me on connection attempt. Where can I set that?
I'm having some problems with windows' firewall. Last night I tried to set up a simple ftp server (to share a couple of folders, and access that folder through other computers connected to the network by typing the IP address into a browser/ftp client on the other computer). My problem simply is, that I cannot connect to the ftp. It works fine when I try to access it from my computer (which is the server).
But I can't connect to it through other computers, unless I turn off Windows Firewall. I tried playing around with the Inbound/Outbound rules (disabled/enabled everything), nothing worked. I also have FTP allowed in "Allow a program or feature through Windows Firewall", and I still haven't managed to get it to work. Can anyone suggest any solutions?
I've got an issue that's been driving me crazy. I've installed MobaSSH and the windows firewall absolutely refuses to let it through. I've taken down the firewall and everything works fine, so I know its the firewall. Same problem with a Serv-u FTP server but I'm not as worried about that as I am the SSH server. MobaSSH adds itself as a service, so while it was running I found the process and made sure that it was added to the firewall, I can find nothing else to add to exceptions. I haven't found much in terms of firewalls for Windows 7, so I would prefer to get this to work instead of switching firewalls
View 8 Replies View RelatedThis is about the firewall which comes with Windows 7. I notice that the log file is empty. The reason appears to be that it is turned off by default. How can it be turned on?
View 1 Replies View RelatedI have a home server that runs utorrent and sabnzbd. I access them both via their web interfaces from my main computer. Now, up until recently the server has run on XP since it only has 512MB of ram, but after reading that seven will run on that I installed 7077. My main computer already runs on 7068. Problem is now I have real problems connecting via the web interfaces.
I can connect most of the time with the IP address in the address (ie http://xx.xx.xx.xx:8080/sabnzbd/), but when using the network name (http://server:8080/sabnzbd/) it takes several minutes just to refresh. This would be okay, but other programs that tie in with sabnzbd fail on both IP and network names.
Now, when I disable the 'private' side of windows firewall on the server the problem vanishes. But despite my best efforts I can't make a rule that let's it work while the firewall is up.
Currently I'm using Comodo Internet Security as a firewall and I'm planning to build a home network using Windows 7 Homegroup and thought that Comodo might be an obstacle in doing that.
So my question is, as a normal home user of Windows 7, do I really need a 3rd party firewall other than Windows 7's firewall?
Right now I'm trying the combo Windows Firewall + MSE. Everything is working fine except one thing. If I activate the outbound protection in the firewall the homegroups feature stops working properly. I can't see my other computer (same configuration on both).
You don't have to be a genius to see that there's some missing outbound rule and that's why the win firewall is blocking this feature.
The question is: Does anyone knows how to configure the Windows Firewall for this feature to work properly ?
I want to use my router as a firewall. I don't know if this matters, but I have a D-Link Model: DI-624M.
I would like to be asked on all outgoing and incoming internet actions.
I attached the page of the instruction manual if that helps, it sure didn't help me.
Are there any good free firewall programs? I don't want to just go googling such a query as I'll most likely get trojan horse malware.
View 6 Replies View RelatedJust wondering what you are using for antivirus and firewall with windows 7.
Currently I am using Avast Home ant-virus, and Win 7 FW. I may give Comodo a try.
What do you think?
i m not able to open texas holdem poker on facebook. Quote :[#00fff6][#00ffed][#00ffed][#00ffed][#00ffed][#00ffed][#00ffed][#00ffed]Code :[fixed][/fixed][/#00ffed][/#00ffed][/#00ffed][/#00ffed][/#00ffed][/#00ffed][/#00fff6][/#007bff]
View 3 Replies View Relatedi m in school how can i use facebook in h12 software >?
View 1 Replies View RelatedSomeone deleted my windows xp firewall, is there anyway to retreive it??
View 9 Replies View RelatedI am not really good with computers, I know something is wrong but not really sure how to fix it, I use Windows 7 Ultimate with a dedicated graphics card 2GB GDDR5 AMD Radeon HD 7970M and a intergrated graphics card Intel HD Graphics 4000 installed in my laptop, I used to be able to play Total War Shogun 2 (and other games) with my AMD Radeon Graphics Card, but for some reason my laptop decides to run on my Intel HD Graphics 4000 instead now. With my little knowledge that I have, when I go to device manager -> display adaptors, I can see both AMD Radeon 7970M and Intel HD Graphics 4000 there and my laptop shows that both graphics card are functioning properly (and up to date). But when I go to DxDiag, it only shows the Intel HD Graphics 4000, and when I disable my Intel HD Graphics 4000, my laptop cannot detect any graphics card.
View 4 Replies View RelatedCompaq Presario CQ-62 wireless laptop - 64 bit - win7 - Avast AV I am trying to set the firewall to Private/Home as that is where I am. The pc keeps switching it to public which is where I am NOT. Also, when it is on public, I have no connectivity but do have when on private. I can't seem to find any setting that will allow me to set it to private and KEEP it. I need to know how to set it for either situation and can't seem to come up with anything so far.
View 4 Replies View Related