Command That Enables The Restore System On A Partition
Apr 24, 2012In Windows 7 SP1, I can not find a command that enables the restore system on a local partition.
View 9 RepliesIn Windows 7 SP1, I can not find a command that enables the restore system on a local partition.
View 9 Repliesi have recently format my windows partition on my laptop and installed the windows 7 again.the problem is one of my partitions lost . when im going to Control Panel>Administrative Tools>computer management > disk management i can see my "c:" partition with different capacity as shown in image below.this partition was 100 gb before and the lost partion was 120. what i can see here a total of those two in down . i need my data on the other partition. is there anyway i can see those and make backup ?
View 2 Replies View RelatedI instelled kubuntu on a disk with Windows 7 installed. During the setup, I accidentally formatted the ~200MB partition with windows 7 boot files. The partition is still there, and I can access to it and to the windows 7 main partition. But Windows 7 (obviously!) doesn't boot! How can I restore the content of this partition? The Windows 7 dvd didn't work because can't recovery the boot files.
View 6 Replies View RelatedI currently have a windows seven cd disk that I purchased from retail and recently I have tried to see if I could use the data partition that came on my laptop in order to recover my pc when I tried to launch system recovery from the bios it would just boot to windows normally. instead of trying to start up system recovery using a partition I wanna know how do I make a partition on my pc, and how do I turn that partition into a recovery partition using my purchased copy of windows 7 that would all me to be able to use that partition instead of a disk in order to reinstall windows.
View 3 Replies View RelatedI have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me error saying Setup was unable to create a new system partition or locate an existing system partition.
View 9 Replies View RelatedSystem Restore will not create a restore point or restore to a previous date & time.The error message was: A restore point could not be created: An error was detected in the Volume Shadow Copy Server (VSS).The problem occurred while trying to contact VSS writers. Verify that the Event System Sevice and the VSS service are running & check for associated errors in the event logs (0x80042318).Volume Shadow Copy is started & running (done in system events).Event System Sevice and the VSS service are started and running. But no cigar, SR still broken.
View 9 Replies View RelatedDoes anyone know how to schedule/automate a rollback to a system restore point at a set time each day?What i'm trying to do is:1. Disable the standard system restore behavior for creating restore points when installing apps and drivers.2. Automatically/schedule a restore point to be created every morning. (probably using Task Scheduler)3. Automatically/schedule a rollback to that morning restore point every night.This should allow users to mess up the workstation during the day, and restore a working rollback point at night when users are not using a workstation.Updates are scheduled at nighttime, so before that happens, it should rollback to a good restore point, apply updates, then create a working "new" restore point with the updates in the morning....etc.
View 4 Replies View RelatedI have a copy of windows 7 from a friend. (USB, possibly enterprise)It runs well, is official and can be re installed and is verified through the Microsoft site, so the media doesn't seem to be a problem.I was able to install Win7 Ult x64 on my WinVista HomePrem x86, but I went back through to clean the hard drive (it was full, I didn't format before) and after low level formatting I cannot reinstall the OS. The harddrives are completely empty, and I get stuck at "Setup was unable to create a new system partition or locate an existing system partition," after hitting next when you are selecting the HD partition to install on. I tried a couple of things already:
-Installing on another harddrive
-Formatting using Hiren's bootcd
-Using a hard drive with XP installed to see if it is an upgrade and not a full version (no luck, still wouldn't install)
-diskpart > list disk > select disk 0 > list partition > active \ in cmd..I have three hard drives attached to the computer right now, they can't all be broken. T.T
Is there any software you can install (on Win 7 Pro) that enables you to over clock and see all the performance settings and get performance results after tinkering with overclock settings.I've never looked in to this before so I thought I'd see if anybody knows of some specific software names (websites would be helpful) that can do this.
View 5 Replies View RelatedTrying to partition a HDD to install an OS. All was going well till I tried format the active partition - error: Parameter is incorrect
View 6 Replies View RelatedRecently, I'm assuming a virus or whatever made my system un-bootable. I have a Dell XPS 420 ... Windows 7 ... a single 500GB hard drive with three partitions.
- partition 1 - the OS, approx 250GB
- partition 2 - docs, approx 20GB
- partition 3 - other stuff, approx 230GB
I booted from the installation disc, and I tried everything imaginable to be able to boot up again, but was unsuccessful. So I made the decision to re-install windows, but before that, I wanted to copy everything off the hard drive onto a portable drive.Going into the command line tool ... I am able to read from the hard drive fine ... I copied everything from the first two partitions off to an external hard drive. No problem.HOWEVER ... the system is not recognizing, or not allowing me to see, the 3rd partition. I went into DISKPART and looked, and it does not have a drive letter assigned to it. I can't find it. Something I can do? Or is this part of the corruption of the disc that is preventing me from booting?if I re-install the OS on partition 1 ... will partition 3 be harmed and would I still able to see it in Windows when things are back to "normal"? If so, I won't worry about the previous question and I'll just re-install. But if not, I won't re-install until I can figure out how to get that data off the 3rd partition.
what is the command for a factory restore using command prompt i can only use the command prompt my computer wont let me do anything else. i have a dell inspiron n5010
View 14 Replies View RelatedDoes anybody know the command to make a partition bootable in Win 7? Fdisk does not work and I want to partition and make it bootable for an older program that runs in DOS
View 8 Replies View RelatedRecently my SSD failed so I tried installing windows 7 from DVD on my HDD but I always get an error message: "Setup was unable to create a new system partition or locate an existing system partition."I've tried everything I could find here: I gave boot priority to the HDD, I unplugged every other device but nothing seems to work.
View 4 Replies View RelatedThrough a series of shenanigans involving experiments with mirroring on Windows 7 64 bit using Disk Management, and then subsequently removing the mirror after having recurring errors/problems with the synching, My 100MB System Reserve partition has ended up on a separate partition than my system image. For instance: Disk 1 System C: Healthy (Boot, page...) Disk 0 Healthy (System Reserved...).
In addition, the System Reserved partition has been assigned a drive letter "G:" or "E:" and is now visible in explorer and it won't allow me to remove it and supress from explorer view.
I'd like to
1) move/create the System Reserve partition to Disk 1 (with System C: drive)
2) remove the System Reserve partition from Disk 0 to free it all up as a data drive
Do I use command below to create a System Reserve on Disk 1? bcdboot C:Windows How do I then delete the System Reserve partition on Disk 0. Also a byproduct of all of this, when I reboot now, I have a "Windows 7" option and a "Windows 7 Secondary Plex" option. The "Windows 7" option no longer boots (it's stops while the logo panes are flying in circles to form the logo and goes into a fix loop that never fixes it). I have a feeling it's looking for the old mirrored hardware configuration or something. However, "Window 7 Secondary Plex" option does boot just fine. Do I use MSCONFIG to remove the "Windows 7" boot entry so I don't get this annoying option at boot?
So I cleaned my registry using RegSeaker and now my computer BSODs at the 'starting windows' screen, even if I try to start in safe mode. I created a backup of my old registry before cleaning and I can access it using the command prompt that you can access in the system restore options. However, when I try to update the registry with it I get an error message saying 'cannot import.
View 7 Replies View RelatedOK, so a couple of days ago, my HP desktop crashed and then went through the whole System Recovery loop(I couldn't login to Safe mode, wouldn't let me past the System Recovery Screen). Well I backed up the entire C drive using Backup your files in the menu. Then it shows you all the file types it will back up; i.e photos, videos, e-mails and bookmarks. So I did that to an external hard drive and it comes out to 143GB.Now comes my problem. I've been able to copy everything from the external hard drive using RecoveryMgr.exe which opens the WIM files and saves them to my C: hard drive under System Recovery Files. However it does not seem to work when it comes to putting in my old Thunderbird e-mails, contacts and such or in Firefox to restore my bookmarks, saved passwords.
View 1 Replies View RelatedI am trying to restore my computer because it launches into system recovery. After I get to the recovery options I tried to do system restore but it tells me there isn't enough space on the disk.
View 6 Replies View Relatednot A legel verison of window 7. wont to restore to factory setings.
View 1 Replies View RelatedI have tried a lot of things and I can't get system restore to work. I don't need to use it but I would like my computer to be working since there is no reason for this not to work. I just keep getting ComPlusStaging failed to obtain original copy from %systemroot%/registration all the time.
View 9 Replies View RelatedI have Windows 7 ultimate 64-bit installed on DELL desktop (Optiplex 990) i7 Core. I have two HDD: Disk 0 contains the operating system 500GB. and Disk 1 empty 1TB.
I want to make a partition on disk 1 to mirror the operating system partition and keep the remaining for data storage. I tried to do but I had the following error message: "All disks holding extents for a given volume must have the same sector size, and the sector size must be valid."
I tried to attach a screen shot but couldn't.
I have been have some problems with my HP dv 8500 laptop. It has vista on it. I could not get any windows updates. So I backed up my files to a flashdrive and did a system recovery. I have files on the flash drive but cannot transfer them back to the laptop. I would love it if someone could guide me through the process.
View 9 Replies View RelatedMy Windows 7 System Restore doesn't restore. It allows me to set them and tells me they've been done. But on the couple of occasions when I've wanted to use one, no joy. Yes I know I could possibly do it in 'Safe Mode' but that isn't an answer as to why I can't do it in regular mode?
View 2 Replies View RelatedSystem restore failed to extract the file. from the restore point. There was a disk failure during the restore. This might be caused by bad sectors on the disk. I get the same message, but with a different file name, with every restore point I try, and I have now tried all seven available restore points, going back to 30 Dec 2011. The computer was working perfectly until 3 days ago when it blue screened, and has not started properly since. It is a Corei5 with 4 GB RAM and is only 12 months old. I just dont believe the drive has that many bad sectors.
View 9 Replies View Relatedmy Windows 7 after restoring it to factory configurations. I installed Ubuntu 12.04, the installation smooth as butter, but after a few days of usage, the GRUB system screwed up. After a LOT of problems I managed to restore my Laptop to its default configuration. Then, I tried to restore my personal files with the DVDs I made, but when the manager finished, it only showed a folder with all my files in it! And it didn't give me any option to restore these files or something!
View 3 Replies View RelatedI lost 2987 emails by clicking on email tab in windows task manager All the emails disappeared so now >>??? wondering if Sysytem restore restores email as well with Win 7 are do I have to do like Ive seen ? Go to your documents folder and right click on the folder titled Mail the properties and then the previous versions tab.Click on a restore point from before it was deleted and click restore.
View 3 Replies View RelatedI wanted to resize a partition, so I backuped all important files and booted from a vista PE CD. The program used is called "Easeus". After the resizing a message appeared, which told me that the system information couldnt be updated. After a restart, it - well, it didnt restarted. I tryed to format my C:Windows partition, but Easus decided to randomly format my linux partitin, too. Yey. After that i just formated everything, so i can create one big partition so this never happens again :P. To put it in a nutshel, there is no way to boot besides from booting from a cd. The diagnostic tool of the fabricator is giving me the "error code: BIOHD-3 No bootable drives detected" message.I tried to fix it with a win7 repair disk (just realized, that the disk is for 64bit, i have a 32 bit os - i think it doesnt matter, because there isnt any os installed at all). I used pretty much every "bootrec" command, sucessful, but no change. The startup repair gave this message: "the partition table does not have a valid system partition" diskpart - act isnt helping either: "The specified partition type is not valid for this operation."I dont know if i could install any os from a disk - i dont have a bootable installation cd/dvd. Because of that i would be happy if someone can tell me where i can find a free os and how i install it. From a os i can install my win 7.
View 1 Replies View RelatedI currently have a dual boot on my computer with Windows 7 and XP. Unfortunately as my computer is quite old my hard drive is not very big and with it being partitioned I am fast running out of disk space. So I tried to shrink the XP partition to allow me more disk space for Windows 7. Unfortunatley this would only let me shrink it by 83mb for some reason. I decided that since I barely use XP anymore that I would simply reformat the XP drive then try and merge them together. When I tried to format the partition it just gave the error "Windows was unable to complete the format". I then discovered in Disk Management that the Windows XP partition was the system partition which was causing the problem.
View 4 Replies View RelatedI have started the installation process of windows 7 on a clean 1 TB hard drive. In order to ensure expediency of the read time of my primary drive, I choose the custom installation. When I did I partioned the drive as 250GB & 700GB. Hoever it also created a 100MB system partition on its own. It never did this in Vista. Is it suppose to do that?
View 2 Replies View RelatedTwo days ago McAfee alerted me in message box that they had quaranteed a trojan horse. When I went to start my computer after work yesterday it went to start up repair which could not fix the problem automatically. In the system recovery options, #1 didn't work as states, #2syastem restore says no points (there were lots prior), #3no back up image avail #4windows memory diagnostic says all cool until it restarts then back to start up repair, and #5;is where I sit.
View 3 Replies View RelatedHow to Repair Windows 7 System Files with System File Checker ?
View 0 Replies View Related