Clean Install Windows 7 - Mouse Randomly Stuttering For A Second Or Two
Mar 7, 2012
On my new clean install of Windows 7, I noticed that my mouse was randomly stuttering for a short second or two. The best way I can describe it is that someone is randomly unplugging and plugging it back in very quickly. After a short search, I heard it was some sort of processor problem in the msconfig.exe -> Boot -> Advanced Options. My computer is a 2 core, 4 thread processor. I tried setting it to 2 processors; the issue didn't seem to arise. However my FPS in games dropped drastically. When I changed it back to 4 processors, it came right back.
MS Windows 7 Ultimate 64-bit
Intel Core i5-2415M CPU @ 2.30 Ghz, 4.0 GB RAM, Intel HD Graphics Family
Logitech G400 (no problems on other computers)
View 4 Replies
ADVERTISEMENT
Dec 26, 2012
I've been having this problem for the past couple of months and it's driving me insane. I've searched for hours on end without any luck of a fix. The problem is that my mouse lags (or stutters) every 5 seconds. The lag can sometimes be so bad that the mouse completely stops working for a few seconds. I've gone through 3 mice and they've all had the same problem so it can't be because of the mouse. The mouse I'm currently using is the Logitech Anywhere MX.
View 9 Replies
View Related
Sep 22, 2012
I am experiencing mouse lag/stuttering in a few games recently, however this only occurs when looking around in a game. The two games that currently do this, are Borderlands 2 and BRINK, however I believe more do which I have not found. I know this does not occur in Skyrim and also Protype 2. This does not occur when "aiming down the sights" in these games, only when looking around normally. I have all drivers updated, tried different mouses, mouse acceleration, mouse smoothing, v-syncs, dropping all graphics to low, looking around for other issues, but nothing seems to be quite the same. I'm using a GTX 670 with a Razer Naga, complete specs in my profile.
View 2 Replies
View Related
Mar 9, 2012
I've recently begun to have a problem about my USB mouse and my new mobo.
I've bought an MSI 990XA-GD55 3 weeks ago. I've formatted my hdd, installed a clean x64 ultimate, installed newest drivers and updated the bios. However, there began some problems at startup about my mouse. Randomly, lets say, in every 7-8 Boots, my computer doesnt recognise my mouse, saying that "device could not be installed" or something like that, you know, the default "usb device error".. And i must either re-plug it, or restart the computer..
I've changed the ports, re-done everyting, but no chance..It happens randomly, just before "Welcome" screen appears, the light of the mouse fades away, and after Welcome screen, cursor does not move..
Thinking that it would be a mo'bo issue, i've changed it with a better model MSI 990FXA-GD65. Another format, another install of the newest things, bios update..However, *** happens again!
I've got a A4 X7 XL-750BK mouse, which is kinda new and doesnt have (and had) any problem except this one. Some say, that i should change it; but i'm really confused about it, because it runs just fine and smooth..
My other system elements are X3 720 B.E, 2x4Gb Geil Enhance Corsa 1600Mhz, Sapphire Radeon 5870 V2, 1TB Samsung HDD, etc..
OH, almost forgot the add..I've also got a USB Powered Sound Card, a Line 6 UX2, and it just works flawlessly, never had such "functional" problems..
View 2 Replies
View Related
Feb 9, 2012
I got a new machine recently and it all works fine, except the operating system seems to randomly freeze. When it does the only way I have found to get out of it is to manually plug it out and restartOn freeze the keyboard and mouse become entirely unresponsive, the cursor does not move, nor do either click buttons do anything, if I'm typing somewhere the text does not appear, and Ctrl+Alt+Del doesn't bring up the usual screenI'm running windows 7 home premium on a 64 bit machine. I haven't found anything quite like this problem around so I thought it deserved a new topic by itselfI can't think of what to do to determine the cause or any potential solution. Everything's up to date. I think all the drivers are too. I put in different virus software 'cause I thought that might be itdit: The last time it happened I tried putting the keyboard and mouse into different USB ports, but that didn't work.Edit2: I just went to my device manager and manually checked for updates for all the drivers, and it turned out my graphics card needed an update (I updated it myself about three weeks ago so I discarded this as a potential problem). So I installed the update.
View 4 Replies
View Related
Jan 15, 2013
Just recently my mouse keeps randomly going off and I have tried it in the 4 front usb 2 ports in my computer and it works but still randomly goes off for a millisecond and in the back usb ports it doesnt work at all when its working it sometimes affects my headset when the mouse goes off and the sound will be really weird and eventually revert back to normal.
I noticed when I went on control panel -> devices and printers my pc had an error symbol on it so I tried to troubleshoot it by using the option when right clicking and it says needs to install 'usb controller driver' and I let it try and find it but it said it failed because it couldn't find it and I can't find it anywhere if anyone can link me to it I would be so happy to get my mouse sorted out.
View 2 Replies
View Related
Jan 1, 2013
I'm using a Lenovo ideapad y580 with windows 7 home basic along with a Steelseries Sensei RAW, and for the first month it ran smoothly without any problems. But after taking my laptop to travel, when i got back and plugged in my mouse, my mouse will work for a few minutes, then suddenly lose power. After a few seconds, it will power up again. Due to this, i have googled for 2 or 3 days, trying to search for a fix. Initially i thought it has something to do with the power management, and i disabled the option where they disable the usb device to save power on all the power plans, but to no avail. I've also tried uninstalling the driver and re installing it, as well as test my mouse out on another computer, and the mouse has no problem on another computer. When the mouse loses power, the other usb devices plugged into my laptop is unaffected, and only my mouse loses power. This happens on both my 2 USB 3.0 ports as well as USB 2.0 port. I should mention that my laptop has trouble configuring windows updates recently, after installing, on startup, it says 'failure to configure windows update"
View 1 Replies
View Related
Oct 9, 2011
Every time while I am in the desktop my mouse randomly disconnects and thanreconnects.It freezes and making usb sound.
View 2 Replies
View Related
Sep 13, 2011
I recently upgraded from Windows Vista 32 bit to Windows 7 Home Premium 32 bit. Everything was fine and I liked it. Then it stopped registering the clicks from my mouse. I rebooted and it was back to normal. After a while it stopped again and I've been fighting with it ever since. It works about 1 out of every 15 reboots. I've tried rebooting with the dvd for windows repair, nothing. I removed wireless USB card and switched to ethernet connection, worked for a minute until next reboot. I've reinstalled windows (haven't formatted yet) to no avail.
I've tried and tried to contact windows for support, but can't find a phone number. When I try to go through the steps on their site, it says that my product ID isn't good for this country, yet I bought it at Best Buy here in Louisiana, and they want to charge me $50 to talk to me!! I'm fit to be tied!!
The one thing different that I did was, when I initially upgraded, I disconnected my backup drive since I didn't have anywhere else to back it up. I re-connected it once everything was reinstalled. For the life of me I can't seem to figure this out. If I have to format everything I will. I about to that point right now.
View 6 Replies
View Related
Dec 8, 2011
Sometimes for apparently no reason at all my mouse cursor will just freeze for a couple seconds and I won't be able to move it. When this happens (I have Process Explorer minimized to tray) I can see that just about no CPU is being taken up either. So I know that this freeze isn't because my processor is being overworked. Also, it's not because I'm opening a program or anything, hence it is seemingly very random. Is there any reason why the mouse should randomly freeze from time to time when nothing that major is happening on the system?
View 9 Replies
View Related
May 6, 2012
Very randomly the mouse and some times the keyboard freezes and won't come back. I checked device manager and nothing is yellow or red. i tried updating the usb, keyboad, and mouse drivers but none are available. All are plugged into a dlink usb hub.
I tried 2 mice and keyboard combinations:
1- hp mouse and keyboard wired
2- useb mouse/keyboard wireless
View 7 Replies
View Related
Oct 26, 2012
I've tried my mouse on another computer, it works flawlessly. But it seems like my computer is hating my mouse, it will suddenly freeze with no reason, i have to plug it out and back in to get it back to work but for maybe for few seconds to few minutes, it might freeze again.When i removed all razer driver, my mouse goes back to normal, but why do i have to use without Razer Synapse while i'm having a razer mouse? wtf?
View 1 Replies
View Related
Nov 10, 2011
it now rapidly left clicks stuff and will not let me left click for a couple of seconds. it also randomly highlights. it's been doing this for about 2 weeks now. i've tried changing the usb ports for the mouse, also switched between 2.0 and 3.0. i've tried screwing around with the dpi, all kinda stuff, nothing works. it's a razor naga, also i can upload a video to Internet of what the mouse is doing. it's really annoying because i play starcraft and fpss professionally and not being able to left click sometimes really really fucks me up.
View 3 Replies
View Related
Dec 9, 2011
I've been running Windows 7 64x Pro for quite awhile (never had an issue) and recently my mouse will randomly disconnect and reconnect. It happens in a split second, basically windows makes that USB disconnect/reconnect sound. A couple times both my mouse and keyboard froze although the PC itself was not frozen. Additionally, all the lights on the mouse and keyboard were still on when that happened. I notice it mostly happens during gaming (fallout new vegas, mass effect 2 for example) although it does happen when I'm just on my desktop web browsing. The keyboard has only froze 1 time, the rest have just been issues with the mouse.
Here are my specs:
Windows 7 64x (6.1 build 7601)
RAM 8192MB RAM
DirectX 11
Intel Core i7-2600 @ 3.4GHz
ASUS P8Z 68-V LE (Bios v0803)
nVidia GeForce 460 (285.62)
Corsair HX 750
mouse: Logitech mx518
As I'm typing this all my temps look fine (CPU: 34c, Mobo 28c). I read several posts that it could be something with Windows 7 saving power, but I've essentially turned off everything that would cause any sort of power shortage to my USB's or PCI buses so I'm out of ideas. I can't figure out whether its a Windows issue, Nvidia, my mouse is just dying (which I don't think it is considering the keyboard froze as well), my motherboard is bad (hope not since I just upgraded in july!)? OH also, I was having the issue, and did a complete reformat and it still occurs, although that doesn't rule out W7 if its a software bug.
View 9 Replies
View Related
Jun 9, 2011
I have been having a rather annoying issue for a while now. This mostly happens on start up and once desktop loads up either my USB mouse freezes or my keyboard doesn't work or sometimes BOTH. My keyboard is a PS/2 Keyboard. It seems the only solution when both freeze at the same time is to either restart the computer or unplug them and plug them back in. This morning when I booted it up my mouse immediately was frozen and I unplugged it and plugged it back in and now it is working. This error is very random and sometimes doesn't happen immediately on start up but while browsing the Internet a decent amount of time after start up. Another important thing I forgot to mention is I get NO blue screen or no error message it just stops working.
View 9 Replies
View Related
Mar 9, 2011
This error recently started occurring where the mouse will not allow me to close out of windows, or click inside of them. Generally this starts occurring when I start playing World of Warcraft but it's not limited to this only. It's happened when I wasn't playing, or when I am just chatting on Skype, or even not at the computer. It's not a virus, or anything malicious, as I'm pretty competent with that sort of thing, but I cannot figure this issue out.I've also checked the sleep and power options, both are fine.It just stops working for 5-60 seconds and I have to ctrl+alt+delete to fix the issue momentarily. My computer is a Windows7 X64-bit OS, Asus Notebook G60 Series. The mouse is a Razer DeathAdder 3500DPI.
EDIT: The touch pad also will not work during this "phase" of unresponsiveness from the mouse. When I say it will not work, I mean that it will not click as well, but it will move responsively, as the mouse will.
View 4 Replies
View Related
Nov 22, 2011
Every so often I get this problem where my keyboard/mouse functions change.
-With the keyboard it's usually a SHIFT lock (not CAPS lock), that is every button that I hit expresses a character or function like as if I was holding down SHIFT.
-With the mouse there are several problems. Left clicking "sticks", so any field where you can select text or draw a selection box will have that happen when I move the mouse around after clicking somewhere in the field. Left clicking any link or bookmark causes it to open in a new page to be loaded. The scroll wheel function changes to forward and back, rather than scrolling up and down. The right mouse button does it's own tricks, but I can't remember it exactly.
This has happened with two different sets of keyboards/mice operating with different drivers. The only solution is to restart, unplugging doesn't solve the trick. I cannot recall exactly what I may have installed around the time the problem showed up unfortunately.
View 4 Replies
View Related
Apr 21, 2012
Recently I have been having this problem where my PS/2 keyboard and mouse both stop responding. The lights are still on, but neither work. Sometimes it happens just to my mouse, and not the keyboard, but usually both. When it happens, they are not responding for anywhere from a few seconds, to a few minutes (but by that point I restart the computer). If it happens just to the mouse, putting the computer to sleep using the keyboard and wakening it again fixes the problem.
I have tried to update the drivers in device manager by letting windows search for them online, but it says they are up-to-date. I also checked all the connections inside the computer, unplugging and re-plugging each one as well as air-dusting.
EDIT: If I can't find a fix, I think I will just purchase a USB mouse and keyboard, but I'd rather try fix the problem first.
View 8 Replies
View Related
Jun 13, 2012
As of lately my mouse and keyboard sometimes just stop working. It seems to happen more often while I'm playing games (but that's mostly what I do so not sure if that has anything to do with it ). Usually before it happens I'll hear the usb sound and the mouse will disconnect and reconnect and it'll work fine then just out of the blue it'll disconnect and that's that. I have to shutdown and restart. It only just started doing this a couple weeks ago. My mouse is a logitech UAE-96 (I think) and the keyboard is a microsoft ergonomic 4000, its an ASUS MoBo, I've checked keyboard drivers and they are up to date and I've also checked my usb drivers, also up to date.
View 9 Replies
View Related
Feb 13, 2013
I am getting an error "cannot install" 0x80070714 when I try to install windows 7 into a clean disk and the installation just stops..
View 3 Replies
View Related
Jan 30, 2012
I'm working on a re-install of all components following a complete corruption of the boot sector on my drive which could not be fixed with repairs. The last time I installed everything fresh, I had no issues. Between then and now, there have been no hardware changes on my system, but now I am having issues installing the IDT Codecs. I keep getting an error along the following lines: Quote: ExitError: Error=Device Object not present, restart the system and run setup again. Running under compatibility mode, and running drivers from both the motherboard CD and the manufacturer website both have the same effect. The CD, when booted, says "This OS not support!" and only contains 32-bit vista codecs. ECS' website download indicates the IDT drivers as being compatible with Windows 7. Both do not work. It is almost as if the hardware "disappeared," despite the fact that I was using the drivers quite successfully till just 2 days ago, when the boot sector went kaput.
Windows has installed its own default set, which do nothing to power the 8mm jacks which I use with my speakers, but instead put sound through the HDMI, which is useless because I use a dedicated graphics card. I have tried uninstalling this codec and re-installing IDT, to no effect. Windows replaces with its own default codec.I have referenced this thread here, but offered solutions do not seem to work for me: Intel IDT Audio Driver will not install
View 5 Replies
View Related
Feb 3, 2010
Does anyone know whether there is a difference in performance between doing a clean install of Windows 7 vs upgrading Vista? Any better stability? I'm just wondering whether it's worth the trouble of the clean install.
View 3 Replies
View Related
Jul 24, 2011
I have a HP dv6000 with a 4 GB RAM and Intel Core2 Duo @ 1.50 GHz processor. I have Windows 7 Ultimate, 32 bit operating system.
Sometimes the laptop gets stuck and then none of the keys or the mouse works. Yesterday I was watching a movie and the same thing happened but the movie didn't stop.
Today morning the laptop wasn't booting and then later I took out the battery and reinserted it and it worked. Are these two problems somehow related?
View 5 Replies
View Related
Jun 29, 2010
I have seen a lot on clean installs but all guides are from like 2009. Is clean install still a way to install windows 7 with upgrade disc on a new hdd? since i have a hdd with vista on it and i have the licence how do i install 7 with the licence and a black hdd?
View 9 Replies
View Related
Jun 15, 2011
So after i did a Factory Restore, the mouse is acting all weird, and no its not the mouse, its the computer i've tried a mouse thats working fine from a differant computer, but it does the same thing when i connect it to this one, i forgot what they call the mouse settings...BO settings? something like that, but i know for a fact the virus messed up the mouses settings..now how do i change them back?*the mouse freezes randomly and keeps on scrolling untill it reaches the bottom*Edit: To add a topic descriptor. ~ Animal
View 7 Replies
View Related
Nov 8, 2011
I am having the weirdest problem with my computer. randomly my mouse will just stop opening programs/applications, i cannot click on anything in the taskbar etc. I have also tried a different mouse... & reformatted my computer back to the bare basics, reinstalled all the drivers to no avail. one minute i am playing BF3 fine or doing something else and down it goes... the only thing i can then do is reboot my system and go again.
View 4 Replies
View Related
Jan 31, 2010
I'm an IT student who got a free Win 7 x64 disk from my school, and I am unable to do a clean install. My system specs are as follows:
Intel Core 2 Duo 3.12 Ghz
nVidia GeForce 9800 GTX 512 MB PCI-e
320 GB Western Digital HD SATA
1 Gb DDR2 1066 MHz and 2x2Gb DDR2 1066 MHz SDRAM
I set my boot sequence to boot from DVD-ROM drive first, and HD second. It goes to the "Windows is loading files" screen and gets hung up. I started the process and went to watch TV for an hour, and it is still on the "Windows is loading files" screen. I haven't gotten any error messages. I've unplugged all USB devices from my computer as I have seen on this forum that it has worked for some people.
edited to add: I originally had only 2 Gb of RAM, and it got hung up at the "Windows is loading files" screen. I thought it was getting hung up because I didn't have enough RAM, so I bought brand new 2 sticks of 2 Gb RAM. I took out one of the 1 Gb sticks and placed both of the 2 Gb of RAM...for a total of 5 Gigs. And, it is still doing the same thing.
View 9 Replies
View Related
Apr 6, 2012
i've had enough of 7, I use my PC for music and after months of installing/uninstalling/re installing/researching/driver checking etc. i've decided i'm just not going to get things working with 7.
I have my XP disc and i'm ready to do a clean install, but i'm struggling to get it going... what do I do!? Inserting the XP disc brings up the autopay but the option to install is greyed out, which I understand as it's a step down. However, when I press f12 on booting to try to boot my pc from disc it just locks on the boot menu. What can I do to get a clean install of XP going?
View 14 Replies
View Related
Jun 18, 2012
I have been having numerous problems over the past wk. The firewall won't stay on, can't do windows updates etc. I have run Vipre as my anti virus and also mbam and superantispyware and everything is coming back clean. Today I decided to just backup my documents etc and then do a clean install. Now the problem is that the DVD burner doesn't show up in the BIOS. It shows up in my computer and it's running fine. If I format it out of the computer can I get windows to install from that DVD drive?
View 2 Replies
View Related
Aug 10, 2009
i wanna Format my C:/ drive and Clean install Windows 7 beta..
im inserted W7 DVD and restarted my computer.. bt doesn't Boot From Windows 7 DVD .My first boot Devise is DVD rom.second Boot Devise is HDD...
View 9 Replies
View Related
Feb 26, 2010
I didn't notice until I tried 2 burns. Then I resorted to downloading elsewhere and after 3 more downloads I got the right file(verified by hash) for 64 bit Windows Pro English. Burned the iso to my thumb drive fine, seemed to install fine and fast on this system: [code] Have 2 500GB spinpoint F3s in raid 0 and 1(setup in bios correctly and in raid menu bios fine)190GB raid 0, 375GB raid 1 using Intel raid after mostly done with install it said it had to restart so it did, but since I used a USB thumb drive it tried booting from that again instead of finishing install. I redid the install after fixing partitions and it seemed to go fine this time I removed the drive when it restarted. I was actually finally in windows 7!After installing a couple drivers I needed I restarted then things went bad.Could no longer enter windows normally because once it loaded the screen went blank.It automatically installed gfx drivers but the monitor drivers aren't installed and I was incapable of installing them after 1-2 hours trying to figure out a way. Monitor didn't show up in device manager.Monitor is an Acer2051w.I could get into safemode and try to mess with stuff.I was able to uninstall video drivers then boot into windows normally but it would automatically install the same driver and I wouldn't be able to get back in again. Automatic driver installation was off by the way.
So I couldn't fix this so I decided to reinstall Windows 7. The install went through fine, said it had to restart to finish up and after restarting the screen would stay blank forever. Doesn't seem to be installing properly now.So I can't get it installed again, and when it was it wasn't working properly. I have the monitor drivers even but no way of installing them so Windows is screwing up setting a bad resolution/ settings for the display that I can't fix hence the blank screen issue.
View 4 Replies
View Related
