I have a toolbar on my taskbar titled "Programs". It has about eight folders in it. I made another toolbar, and placed it directly adjacent to the Programs toolbar, to obscure the eight folders and force it to be a dropdown menu.Trouble is, as soon as I lock my taskbar, right next to the arrow that displays the eight items of my Programs toolbar in menu-form, one of the eight items is showing up as an icon, as if the other toolbar isn't close enough to the Programs toolbar in order to completely obscure the eight items.
I recently installed 64-bit Windows 7 on my new computer I built a few days ago and I have no clue as to why it only shows my memory at 4GBs. My BIOS show the same thing, however CPU-Z says I have the appropriate 6GBs. The "Maximum Memory" option is unchecked in msconfig, by the way. Does anyone know what may be causing this issue?
I have a Toshiba Satellite, A305 S6905 with a New Install of Windows 7 Home Premium 64 bit.Bios was updated to latest 2.20 version. I put two new, matched 2 GB ram modules in it. It does not show but 2 GB installed even in the Bios. I checked both modules by putting each one seperately in the primary ram slot and both were showing up as good. I even put the old 2 GB and 1 GB modules I had before under Vista and it still only shows 2 GB installed.It only shows 2 GB installed and 1.87 useable..It boots OK and seems to run fairly smoothly but I have not put it to the test under some memory hog programs yet.
On windows 7 I have the CPU usage plug in, added when I became convinced that more was happening than I thought. Although nothing is set in shedule processes, the 4 cores of the CPU are often going mad, with 70-80% of the 3 GB memory being used... Is there a program which tells me what the bl..... machine is doing. Perhaps a permanant window on the bottom of the screen? It is so frustrating as it slows down internet explorer and generally seems to be more interested in its own thing than my requests.
I previously had a computer with Vista on it. I purchased a new computer with Windows 7 and installed MS Office 2010. I transferred all my files from my old computer to my new computer and now when I go to insert pictures into my website, the pictures are not showing up as thumbnails so I can view all at the same time. They just show that little icon.I have went through a lot of the threads in response to this problem and have tried them all without any success. Could it be old settings that transferred over and are not compatible.
i have a dell studio 1535 with windows7 ultimate x32. For 5or6 months everything was ok but yesterday when i booted my laptop the welcome screen didn't show anything. No users. I rebooted it but still the same. Also when i log in in safe mode all the users show up what to do ?
i work on Dell, Windows 7, 64 bit. i use to work with my HDD perfectly until once my computer booted but my HDD did not show up... when i feel it i can see that it is working but the light isnt even on?i tryed pluging it in to other computers it worked fine but it just does not work on my computer?
After the welcome screen there's only a "Other User" and nothing else. My account isn't shown. I tried to log in through Other User but it's blocked with a Username and Password. I'm scared to loose all my stuff I have on there. I try to get on Safe mode to System Restore but the "Other User" still pops up and my account still isn't shown so I can't access my account(I'm using a different laptop to post this). I don't remember ever putting on a "Other User" account,. I don't want to loose any of my items I have on this PC. How can I remove this "Other User" and get my account back without loosing everything?
after setting up brand new pc and instaling adobe acrobat 9 pro. my e boooks are not showing the cover images in my folder . they used to in fact the only way the covers show is when i click open in acrobat and a new page opens for me to select a file, then they show but the images dont stay . is there a check box for searches or displaying content i have forgotten . ps its good to be back
I'm running Windows 7 64 bit and when I connect an external HDD sometimes it shows and sometimes it doesnt. I work a lot with external HDD's plugged into one or all of my front USB ports and there doesnt seem to be any consistency to when it shows in the computer tree. Between this and autoplay not working it feels like Windows 7 has taken an enormous leap backwards.
I've just spent the last couple of hours stripping down my rig,for a clean but mainly to do something about the cable management.But since rebuilding it 2 problems have arisen.problem 1 On start up I'm getting the message boot manager is missing .I go through the steps CTL>ALT>DEL then DEL to enter bios and select the drive to boot from in advanced mode F7 (only one drive is there on the initial bios screen where the drag and drop option is)Problem 2 once I've logged in it is only showing 2 of my 3 hard drives.I'm using a z77 mobo 60g ssd boot,256g ssd and a 1tb mechanical.When I go into Computer management the 2 of the 3 drives are visible there.
I have been fiddling around with codec packs and finally found 1 that is ideal for me (Codec Pack All in 1 1.6.3)Everything works perfectly except for mkv thumbnails which I found another way around it by installing Icaros 2.0 The only problem remaining is that .mp4 files are not able to display subtitles in WMP 12, they work perfectly well in VLC but for aesthetic reasons I prefer WMP.Is there anyway to make this work with some sort of registry tweak without having to install additional codec packs such as Shark 007 which even though it states to work without any mess, it ruins all my file types associations and subtitle display.SO to summarize I am looking for a registry hack that can force WMP 12 on Windows 7 x64 show subtitles?
So the problem is that my WiFi somehow doesn't show up on my devices. However, the internet works perfectly fine through ethernet cable for my PC. All my other devices such as my phone and laptop dont see the router even though I have enabled wifi through the router control panel. I also have reset the router manually, updated to recent firmware. My ISP said it might be my computer so I disconnected the cable from the pc to the router and hardwI thought it was my router's problem so I exchanged it for the same model (Netgear N300) but the problem still exists. I went back to ask the computer store to test the router's wifi and they said that it worked fine...
I have got a external hard drive that I am using as a media storage device that has all my 1100 movies on. The problem is that windows Media player is not showing them all for example I have Rose Red Disc 1 and Rose Red Disc 2 and only the disc 1 is showing up and it is also not showing up on my Playstation 3 that I am using for a media server in the living room to play it on my TV why is this happening?
So i got a problem and i cant reslove it. its about the stereo mix .the problem : i think (not sure) that i enabled the stereo mix by Fraps (recording program) where there was a recird Windows 7 sound > stereo so i checked it and then i couldn't talk anymore on the mic that i have. I knew that my problem is stereo mix because when i open the ts and try to talk they hear waht my computer is doing (playing music .. etc...) I tired to put show disabled divices and show disconnected devices but it didn't show up to disable it Tired to install the latest version of my sound card which is : High defenition audio but it didn't show up tooTried also to unistall then install .. the same didn't show up..
i recently purchased isound ice speakers. they are usb speakers, and also work on apple products. i want to watch a video on Internet, and i want it to be louder, but when i plug in the speakers, they don't work.they don't show up under control panel> sounds, even when i right click "show disabled and disconnected devices". they do however light up when i plug them in.
When viewing folders and files in Windows Explorer, if I move my cursor to the folders pane, the plus sign appears. When I move my mouse cursor away from the folders pane, the plus signs disappear. This is very distracting. How can I always have the plus signs showing?
I don't know what to do I installed gta 4 on my pc and it worked and everything but when I played the game it's graphics sucked their were no walls and a lot of invisible. So I installed some patch 01.03.10 or whatever and now it won't launch the game at all. When I type in my information for social club it takes it, then the disc icon shows up, then it goes back to where I log in.
I run a number of 32 bit applications on my Windows 7 box. (I have two of them. A 32 bit version and a 64 bit version). When I run MSInfo32 on my 64 bit Windows 7 box, it does not show any of the 32 bit models that are indeed loaded into memory. But they all show up on my 32 bit version of Windows 7. Is there a setting or something that I have to enable in order to "see" all of the loaded modules?