Can 450w Psu Handle Two 4850s ?
Aug 5, 2009I want to upgrade next month so I decided to ask...
Can my 450w psu handle two 4850s ?
Or need to buy a new psu?
I want to upgrade next month so I decided to ask...
Can my 450w psu handle two 4850s ?
Or need to buy a new psu?
Which one of these PSUs should i get, i know the XFX is good quality but i would like a bit more headroom for future upgrades so should i choose the GX
View 9 Replies View RelatedWindows 7 32 bit can't handle 4gb ram you have to have windows 7 64 bit.
View 3 Replies View Relatedi bought i3 2120, Foxconn H61MX motherboard, 4 GB ram, and ATI HD5450 Graphics card with 450 Watt PSU. SO please tell me can i play my dream game Bf3 with it.
View 5 Replies View RelatedCan Pentium4 handle Windows 7?
View 1 Replies View Relatedwhen printing using a toshiba laptop and the printer is a dell a920, I get the following message handle is invalid
View 1 Replies View RelatedI'm new here, guys, so don't shoot me down in flames if this has been covered. I've checked the search, but didn't come up with anything the same.I've just re-jigged the Good Lady's PC - it had some sort of virus. Wiped it & re-installed Win 7 Pro.Put back most of the stuff that was there & most everything works except anything that's a '.doc' file.Clicking on any one of those produces a 'Handle is Invalid' error & won't start. However, dragging & dropping on LibreOffice starts up the file & it can be edited. Saving it again does not fix the problemOne noticeable difference is that I have gone from MS Office XP to LibreOffice as the old XP was no longer opening some new file being sent to her (choir!).I am wondering if this may be the cause. I have a copy of MS Office 2010 & will try installing that & taking control of the .doc files. I'll see if that fixes it
View 1 Replies View Relatedi dont know if my pc will be able to handle battlefield 3 and max graphic without any lagg.
Spec
Processor i7 920 2.8ghz (prolly will overclock to 3.2ghz)
Video Card Dual Ati Radeon 5970s
Memory: 6gb of ram
Hardrive: 1.15 terabyte.
I have a system that I'd like to clone to an SSD. The source disk is an HDD that is currently using two partitions. I'd like to just move the C partition to an SSD, but my only question is, what cloning apps would allow the SSD to be recognized properly, or would Windows 7 pick up the fact it is an SSD drive and adjust the OS accordingly, including enabling TRIM.
If it matters, the SATA controller is already set to AHCI, and the target drive is a Crucial C300.
Forgot to mention, I had been using Partition Wizard 7.0 (bootable iso) in the past, but never with an SSD.
I rarely need to send/receive a FAX, but I would like to know how before I need to. In the past, I had a dialup FAX modem, but now I'm on cable, and I never thought about FAXing until just now. My printer also has a FAX function, but the only driver available for it on Windows 7 is the one that Windows 7/Windows Update installs.In the Windows FAX/Scan program, the scanner works perfectly, but When I try to creat a new FAX, it says that I need a FAX modem. I have no idea of whether my cable modem is capable of that or not, but when I select to send a FAX, a window appears stating that I need a fax modem or server, but when I select to use a local modem, an error appears saying that I need to contact the administrator (me). From the interface, the only thing that appears to be for setting this up is the Tools>Options menu, but when I click on that, nothing happens.The first question is whether it is typical for a cable modem to be able to handle a FAX or not?
View 9 Replies View RelatedI have setup the backup utility to use my network drive and create an image and copy the my doc folder. When I run the utility it will go through it's process for a long time before providing the following error information:
Check your backup
One of the backup files could not be created.
Details: The handle is invalid.
Error code: 0x8078002A
I am unfamiliar with what the error means and when I go to the network drive the backup zip files say they are also corrupt. Has anyone come across this, or have an idea as to what the problem may be?
I just bought a Dell XPS 8300. It will have Intel Core i7-2600 processor(8MB Cache, 3.4GHz), 8GB DDR3 SDRAM at 1333MHz - 4x2GB,Nvidia Geforce GT530 and 500GB Serial ATA 2 Hard Drive 7200 RPM. I am replacing a HP media pc that I bought 4-5 years ago as it seems that the graphics card as well as other issues are about to make the motherboard fry. My son play's the 3D game Minecraft. I just want to make sure if he continues to play,that it won't do the same thing to this pc. I did some research and it seemed without moving up to Alien Ware this was the best I could do for the money.
View 5 Replies View RelatedI've put together a new clone system with the intent of running 64-bit Win 7 Pro on it. Until it becomes available, I have 32-bit XP Pro installed on it. Nothing is overclocked, in fact, the memory is "underclocked" for stability. I'd rather have it stable than gain some trivial performance improvement.
Previously, when I first built it up, I installed 64-bit Ubuntu "Jaunty" on it with 8 GB of RAM installed in it (4 X 2GB). The Linux distro installed and was perfectly stable.
To get a "heads up" on Win 7 issues, I downloaded and installed the trial Enterprise edition. Since I couldn't find any MD5 for the ISO, I downloaded the file twice and did a binary compare on the two downloads to ensure they were the same. Also, I see that the Java applet that downloads the ISO file also has some kind of "verify process" built-in that runs at the end of the download (a checksum?). I burned a DVD in XP Pro using Nero 8 with data verification on (after burning, it reads the burned disk and compares the disk's contents with the ISO file).
Since 32-bit XP Pro can't even fully use 4 GB, I uninstalled 4 of the 8 GB (two modules) when I installed XP on the box. When the entire 8 GB was in the MoBo, I ran MemTest86+ for long periods without errors. To do so, however, I had to "underclock" the memory to DDR2-800 speeds. It couldn't successfully run at DDR2-1066 speeds. A problem that, by checking various support BBS's, was found to be common with my MoBo and the RAM modules in question. After pulling the two modules, I left the memory timing at the conservative settings. I also let MemTest86+ run overnight and got no errors with the two modules installed. My plan is (or, was) to put the entire 8 GB of RAM back after I got 64-bit Windows 7 running on it.
One night while loging off,I noticed a small memo from "cnet" specifying that by running their testtracker software, i could isolate the reaon why i got the apparent error and a poosible clue as to what to do to alleviate it. i read the info on the memo and proceeded and found that a "date" was missing or had been unabled to be updated on a file due to the rules laid down and that prevented an update on he particular file. (only found that out much later.) the date was only the beginning and the the abilities of cnet and finding where to go in the application left me totally lost. i need help in in knowing ho and what exactly to do when the date is accidentally or intentionally changed. and what occurs after that point. does the date affect anything other area.
View 2 Replies View RelatedI've upgraded my PC and reinstalled the OS; spec shown below. The only difference is that now, my OS is on an SSD drive (OCZ Petrol).However, I note that my memory usage is constantly increasing; even with only background apps running, I was up to 7GB. When I check Task Manager, I see that the "System" process's "Handles" count is constantly increasing. As I speak, it's almost at 1,000,000; last night I saw it get up to 4,000,000.
View 2 Replies View Relatedjust installed onto a new machine windows7 home premium the monitor reports the vga signal as out of range (ie the resolution is too high) i have tried leaving the monitor disconnected until the machine has been on for 10 mins( same result) i have tried to get it into safe mode and it says "setup cannot continue in safe mode computer will restart now" so basically I am stuck I have gone into cmos on the mother board and reduced the on boardgraphics memmory to 64mb in an attempt to drop the resolution I do not have any other monitors available (within ten miles)?
View 1 Replies View Relatedhow to handle USB removable media inside camera.With camera there is no "Safely remove hardware and eject media" option.When Photo camera is connected, a new camera device is installed and GUI window is opened with option to browse or copy photos. But there is no removable storage devise eject button on notification area. The USB removable Storage devise is also present on File Manager Computer left panel but again, there is no mouse right button eject option as normally with removable storage devices. I have checked in on several computers. How to understand. I don't believe that it's camera specific but Camera is Canon S95.
View 9 Replies View RelatedWhen I try to connect a wireless modem, I get Error 6 "The handle is invalid" message. Whats the problem?
View 2 Replies View RelatedHow does latest version of Windows Essentials Live mail handle imports from Vista's Windows Mail (emails and contacts)?Were you impressed with the interface? Anything you wish from Vista was still in Live?
View 1 Replies View Relatedi'm trying to install at bios and easy tune 6, but for some reason it comes up saying open driver failure, or open driver handle failure. what do i do?
View 2 Replies View Related"Open device failure/ open driver handle failure" message when installing gigabyte utilities. The install fails. Does anyone know what might be causing this message?
View 3 Replies View Related