My dads laptop worked fine with the WIFI for about 1,5 year, and now yesterday his computer won't identify our router. I have tried reinstalling the driver to his wireless hardware and that didnt work. I have tried with a static IP, but i wasn't sure if i did that correctly, so i can't safely say that what i did with the static IP would work either way.
View 2 RepliesI've recently have a Sony Vaio laptop that will not get an IP addess and cannot identify networks. Both wired and wireless stay at identifying network, no internet access. At this point i've uninstalled Bonjour, reset my winsock catalog, checked the LSP, checked proxy setting - none, tried static information with no luck, uninstalled devices and reinstalled, deleted device drivers and reinstalled with new drivers, ran tweaking to reregister files, remove policies set by infections and so forth. I've scanned the PC with Combofix, Emsisoft Emergency Kit, TDSSkiller, and Malwarebytes and have found nothing. I've also removed the drive and scanned it externally. I'm almost down to a backup and reload. I've also remove IPv4 and IPv6 and reinstalled.
View 32 Replies View RelatedMy computer took so long to identify network and lately it cannot identify anymore.
View 1 Replies View RelatedMy computer has and onboard PCIe network card and another PCI network card. I have connected my cable modem to the PCI network card using ethernet cable and have the internet on my computer working fine. This computer then connects to the other computers in my network using a hub, but it keeps putting this connection as a public network and wont share the internet to the rest of my machines even though I have the computers on the same workgroup and sharing enabled. I am running Windows 7 Ultimate 64bit.
View 1 Replies View RelatedI have just set up a new Windows 7 computer and am trying to access the HD across a home wireless network from my XP laptop. XP can see the Windows 7 but it is asking for USER NAME and PASSWORD. I put in, what i think is, my user name on the Windows 7 in the dialog box and then put in the password that I use to log into the Windows 7 when I boot it up but it rejects these. I went to look on the Windows 7 for user name and password and can't seem to find it in PROPERTIES of COMUPTER.
View 1 Replies View RelatedJust today I decided to download the Windows 8 consumer preview and setup my PC to dual boot with it.I am running Windows 7 home premium 64bit and the 64 bit windows 8 on my other partition. After setting up a separate partition on my hard drive and loading windows8 to this partition, I was all up and running. I had no problems setting up or running windows 8, the problem came when I booted back to windows 7 for the first time. When I booted into windows 7, I was getting the "unable to identify network" error, and no network connectivity.
First thing I tried was simply disable/enabling my network adapter thinking it was just some hiccup. No luck there. Next I pulled the power from my router, and let it completely reboot. Still no luck. I then shut down my pc and booted back into windows 8 and sure enough I am able to get internet connectivity when I am running windows 8. This got me to thinking that when I loaded windows 8 there may be some new drivers installed for my network card that are somehow causing issues when I load into windows 7 again. Not sure how this is possible.
I was under the understanding that when I loaded Win8 to the separate partition that it would keep all it's drivers and settings there and not effect anything when I was loaded back on windows 7 (This logic could be completely wrong, I don't know). So I rebooted and loaded back into windows 7, went into device manager and uninstalled both network adapters and drivers, and rebooted into windows 7 again so it could re-discover and setup the network cards with default windows 7 drivers. This did not work either and I am still getting the same error.
Last Friday my main desktop crashed (lost power to the machine) and on restarting the PC was unable to "identify" the network. By identify, I mean, when using "Network and Sharing Centre" on the basic network information page, the PC shows "Identifying" under "active networks" - no matter how long I leave the PC.
PC details
Model: Packard Bell Power x-30
Processor i7 870 @2.93GHz
RAM: 8GB
O/S: Windows 7 Home Premium (64-bit)
Modem Router details
Netgear N300 Wireless Dual Band ADSL2+ Modem Router
The main desktop is connected to the modem router (via Ethernet). The modem router is showing no sign of any problems itself, all the dashboard lights look ok (i.e. power is on, port 1 shows the Ethernet connection in place, both wireless bands are lit, the DSL is lit and so is the internet). The household contains a number of laptops which continue to work ok wirelessly and/or wired through Ethernet. Even mobile phones are accessing the wi-fi ok.
The DNS Server address looks ok, as that is the address of the web page to the router. I cannot access that web page (address) via the main desktop, but I can from other devices ok. Having gone through Device Manager the Realtek PCIe GBE Family Controller is showing as "working properly". I have tried pinging the DNS Server address, and that fail. I have gone through a system restore to a previous point (before the day of the crash) but that seems to have made no difference either.
I have attempted to set the IP addresses (for TCP/IPv4) directly
IP address 192.168.0.3
Subnet mask: 255.255.255.0
Default Gateway: 192.168.0.1
And therefore forced to set the DNS Server address too
Preferred DNS server: 192.68.0.1
But I don't know what to set for the alternate DNS Server, so left blank. This seems to step me forward, in that the device/network is now identified. However the internet access is still not work, as the "DNS Server is not responding".
I'm running Win7 Home premium 32 bit, and am having my computer crash with BSOD every couple of days. The problem is the blue screen just flashes on, and then the comprestarts before I can identify the error.
View 10 Replies View RelatedThis is my first attempt at the Windows 7 Forums. I used to be able to locate my cursor by pressing the CTRL key on the key board. It would show me where it is on the desktop.
View 2 Replies View RelatedBecause it would be great to link to when helping those that do not know what their computer is, or by what we mean by "what is your computer/GPU/HD/eta?"
I'll make one if there isn't one, but I will need example pictures (preferably with any S/N's already removed)..
identify the function keyes
View 2 Replies View RelatedI have a Battery Back Up made by APC which came with software and I installed the software. Needless to say this software controls the functions of the back up,ie: How long to leave the computer on in case of power failure so that Windows may be shut down without loss of data. Somewhere, I think I read that it is not necessary to install software for battery back ups because Win 7 already has support for this. If this is true then where where can the configuration be made for the back up?
View 3 Replies View RelatedHow can I identify that my laptop processor is 3rd generation core i5.
View 2 Replies View RelatedI was infected with the Windows 7 virus and took the precautions from this website to fix it, scanned everything and fixed all. Computer is running smoothly and speed has been restored. Now though, it will not allow me to use the internet. Stays stuck at Identifying with a yellow caution sign. I am runing windows 7 starter and i only wish to be able to use my internet again!
View 3 Replies View Relatedidentify drivers etc - especially if you bought a computer with pre-installed stuff on it but you want to upgrade the OS to full retail or another version then I suggest - BEFORE installing the new OS try one of these FREE programs -- - they are STAND alone -- they don't require logging in to Driver max.
View 1 Replies View RelatedI am planning to re-install my windows 7 OS.I have lost the motherboard driver DVD and am not sure about the make of the motherboard.How can I identify the Motherboard make and get the desired Driver software online?
View 4 Replies View RelatedI have been taking apart computers for parts and am learning some things about computers.I understand a fair bit about computers.I was just wondering how I can identify my graphics card as in Device Manager, it displays "Standard VGA Graphics Adapter".I am sure it displayed something different before I upgraded to Windows 7. I think I may be missing a driver.
Either way, I used to have Windows XP and the game I wish to play worked then, now I have upgraded, it no longer works. This could be because the driver for the graphics card was erased. I am using whatever card comes with this computer, as I have left it unaffected since the purchase of the computer, and all I have altered is the disc drive and hard drive.Ever since I upgraded to Windows 7, the game won't start and it gives me a graphics error "We are sorry, but the operating system failed to provide the window to render the game graphics in. Please consult the game manual for known workarounds that might improve the game's compatibility with your hardware.". This is for the game "18 Wheels of Steel: American Long Haul". I have checked and this game is compatible with Windows 7.
I am using 350 GB hard disk. C: is 100 which I am fine with.D: is 250 GB. (Though it is showing as 229 GB). I have used 74 GB of space in it. But "My computer" is showing as 7.8 GB free. I am unable to find what happened to another 160 GB. I did not find a way to identify which program/file is using this space?
View 4 Replies View RelatedI install windows 7 64bit. I cannot identify web camera.
View 1 Replies View RelatedI have brought graphics card from friends old computer[DESKTOP]. He lost the driver cd and cannot remember its series or manufacturer. There is a sticker on it which says: GF 9400gt 512 mb. I installed the card win 7 booted up. It detects the card as standard vga graphics adapter, device manager says device is working properly gives me 1024x780 resolution. So I tried 9 series gf driver from nvidia. It says no compatible hardware detected. NVidia auto scan same result. How can I know which card actually i am using? If it is gf 9400gt 512 mb then what is the problem with driver. In device manager hardware id is like this:
pciven_10de&dev_01dc&subsys_00000000&rev_a1
pciven_10de&dev_01dc&subsys_00000000
pciven_10de&dev_01dc&rev_a1
pciven_10de&dev_01dc
pciven_10de&dev_01dc&cc_030000
pciven_10de&dev_01dc&cc_0300
I have downloaded webcam software and they cannot recognize my dell inspiron 1545 webcam.
View 1 Replies View RelatedI'm rebuilding/resurrecting a laptop - a past-generation gaming asus unit, core 2 duo, nvidia, etc etc. its all loaded up and running, but in device manager are listed a parent "unknown" device with three sub-components underneath, unknown. so I need to fetch device drivers, but don't know what these rascals are. the big things are ok. the detail does give us the PCI info:PCI Bus 7, Device 3, functions 2-4.
View 2 Replies View RelatedWhen I disable the network controller in Device Manager, the controller is disabled but nothing changes in Device Manager to identify the device as being disabled. When I used to do the same thing in Windows XP, the device icon turned yellow. Is there some setting to identify disabled devices in Win 7's Device Manager?
View 4 Replies View RelatedI have a peculiar issue where I would need to have "Network and Sharing Center" open to be able to see that my my laptop's wireless connection. I would see the signal bar and also see the dreaded red x.Even when I have it open, I can see it refreshing each second; like its losing connection and reestablishing.My internet connection is working and has no issues.
Network and Sharing Center - Open
Network and Sharing Center - Open and refreshed
Network and Sharing Center - Closed
I'm having difficulty trying to get my new Windows 7 pc set up to share files across my existing home (wired) network which consists of 1 desktop pc running WinXP and 1 laptop running WinXP.I want the 'C' drive on each of the 3 computers to be shared. I've had the 2 Windows XP computers set up and working like this for several years without a problem but I can't seem to get the 'C' drive on the Windows 7 computer to do the same.All 3 computers have the same workgroup name and none of them require passwords to log on to Windows. There are no problems with the firewalls on any of the machines.On the Windows 7 PC when I right click on the 'C' drive and select the 'Sharing' tab, I have set this up to be shared and when I click on the 'Advanced Sharing' button there is a tick in the 'Share this folder' box, the 'Share name' is 'C'. If I then click on the 'Permissions' button, this shows a 'Group or user name' 'Everyone' and this group has Full Control, Change and Read boxes ticked. As far as I can see there is nothing more I can do.
However from my Windows XP computer, when I go to My Network Places and double click on the icon for the Windows 7 'C' drive, I get the message "\Computername is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The network path was not found"I've subsequently set up a sub folder (of the Windows 7 'C' drive) for sharing by right clicking on the folder, choosing 'Share with' and then selecting 'Specific people'. I then set up a group called 'Everyone' with read/write permissions. Now I can navigate to this folder from my 2 WinXP computers.
My rig uses a Centrino Advanced-N 6230 wireless mini half-card. It reports the correct name except within the wireless network list. Instead of 6230 it reports 6320. I searched the registry to see if I could find the error, but nothing found. It's only a nuisance, and a minor one at that.
View 1 Replies View RelatedUnable to see home network computers in Windows Explorer Network screen.
I have a home network with 2 laptops and 1 desktop. The desktop I use as a "file server" in that all work done on the laptops is stored to the desktop. The desktop computer name is HAL. One laptop is fine and sees the network. The other just stopped seeing it; rebooted the laptop; rebooted HAL; did a number of refreshes without any luck. I opened EXCEL and found a worksheet that was listed that I knew was saved on HAL. Was able to open the file and when I tried the SAVE AS I could navigate through all of HAL just as normal. Went to Windows Explorer and still no HAL listed as a COMPUTER on the NETWORK. I have a internet connection so I know I am making it to the router at least. And when I check NETWORK AND SHARING CENTER it shows an active home network. The laptop is running Windows 7 Home Premium Service Pack 1 Build 7601.
This sounds really noobie of me but is it possible to improve local network transfer speed by adding a 2nd network card. I was planning to connect one exclusively for lan transfers and another one hooked to a separate wireless router.
Right now only a maximum of 3 users can stream SD videos off the PC before it gets a little choppy.
The pc in question runs on windows 7 and it's board has built in gigabit, I happen to have a spare gigabit card.
Home network with Wifi and ethernet. Using 3x Notebooks and 3x workstations. One of the workstations (W7 ultimate) keeps changing between Public and Home. When this happens, the internet connection dies. I cannot see other workstations either when on public network. Workstation using wifi. Does the same on cable. When it changes to Public, it disconnects from the internet and I cannot get to the router even though it has the workstation has an IP(DHCP or static). Default gateway and subnet is correct. TCP v4 is being used and nothing else is enabled.
Why is this happening?
- I have tried DHCP as well as Static addresses
- Reconfigured NIC(Netgear WG311T), uninstalled and reinstalled it.
- Removed Wifi connection and re-added it.
- Changed auth type, encryption type and keys to connection
Have I covered everything? The only thing different is that I installed a new router - Duo Plus 300wr. It cannot be the router because all the other notebooks connect to it wireless and so does my iPad, Android device and tablet...so it rules that out?
My problem is windows 7 hangs and freeze when access 2003 server Enterprise edition. This is not a small network, one of the biggest network.i have doubt on individual users on domain. before 2 months we had department wise users mean, for example Accounts@domainname.local. But after we created the individual users like john@domainname.local to all users. this is i believe the cause of problem. When we acess the server via the software it freezed for 5 seconds and then repeat to normal state. And after some time it hangs for 2 minutes.
View 5 Replies View RelatedI disabled my network adapter then restarted and now the adapter is no longer showing up in my network connections. How in the world do I get it back? I have looked at other options (like under the registry which was suggested on a couple of places). I have never seen this happen before. I even reinstalled my drivers and still nothing. How do I enable it again?
View 7 Replies View Related