I just reinstalled Win7 32bit from my Dell system restore. I can ping other computers on my system and they can ping me. My other computers can access the internet. I am hooked to my network both by hard wire and by wireless as before. I am at a lose as to what to look at to correct this problem.
View 2 RepliesI have Win 7 x64 installed and need to do an in-place (repair) upgrade, but I mistakenly deleted the service pack backups with the Win 7 disk cleanup tool. My Win 7 install disk is sp1, and when I try to do "upgrade" I get message to install sp1 before upgrading. I have downloaded the stand alone sp1 but when I try to run it I get message that it is already installed.
My system is as follows:
MB - Asus A8N-SLI deluxe (939 platform)
Proc- AMD Opteron 170
Graphics- Asus Nvidia 7600 GS
Memory- 3 Gigs Corsair XMS DDR (2 @ 512GB, and 2 @ 1GB)
Drives- 2 @ 160 GB Sata
I turned on my computer today and discovered that my network adapter was gone.How do I re install it without the internet?
EDIT:I'm running Windows 7 32 bit on a clone.
I re-installed my copy of windows 7 Home Premium, went to HP's website and installed the drivers I thought were needed. My network controller still displays the little yellow triangle. Wireless doesn't work at all, and wired just says "internet unavailable" (something along those lines) and has the yellow triangle next to it. I tried re-installing the network controller drivers but it seems they are installed because it just asks if I would like to uninstall or repair. Heres the page I downloaded drivers from. All the links seem to take me to the same drivers, I believe my model is HP ENVY 14t-1000. Tried downloading the drivers for HP ENVY 14t-1000 CTO Notebook PC, and HP ENVY 14-1000xx Notebook PC so far no luck.
View 9 Replies View RelatedI had my Vista computer's hard drive crash! Fortunately I have a full back up of my data. Purchases new computer with Windows 7 64 bit O/S. A couple of data transfer issues:
-How do I transfer my favourites from backup to the Explorer 9 favourites?
-How do I transfer my old e-mail messages to a new e-mail programme.
just got a netbook with win 7. system restore now is broken, backup is missing and i cant see any way to connect to wifi service. system restore and wireless connection worked before i restored to an old system restore point?
View 14 Replies View RelatedI created an image using the Microsoft Backup and Restore tool in Windows 7. I saved the image on a network shared folder.I then went to the Advanced Recovery Methods in Windows to restore my image...that I just created. It restarts the computer and goes into recovery mode, I point to where the image is located, I entered the network credentials and it give me an error. "The Specified network resource or device is no longer available. (0x80070037)"
View 5 Replies View RelatedAny simple backup program that is capable of backing up large files incrementally by splitting the file and backing up only changed parts of the file? The files I'm talking about are files that get altered by appending stuff at the end of the file, e.g. log files or mailbox files, so it's generally possible to split a new version of the file at the exact point where the old version stopped, purely by file size.
Specifically, I want to back up Thunderbird and SeaMonkey mailboxes without having to create additional subfolders within those programs. I understand that if something had changed near the beginning of the file, then the whole file will have to be backed up, unless the backup program is capable of some very clever searching, but mostly the files will change only by having data appended to it.
Which backup software to backup Pictures/Documents/Videos so that when you do a fresh install you don't loose anything.apart from your programs of course, just the documents backed up what do you use?
View 13 Replies View RelatedI'm running Windows 7 64x Home Premium on a Toshiba Qosmio X505 laptop. I just got it back from the warranty repair center, where they replaced the hard drive and graphics fan & heatsink, and reloaded the factory windows version. Before I sent it out for repair, I used Windows Backup to create a backup of all my files on a Toshiba casio 500GB external USB drive (I had over 300 GB of files, so it was easier to use Windows Backup than drag and drop all the files, at least at the time). Now that I have the laptop back, I'm having trouble restoring my files. When I go to Control Panel-> Backup & Restore, a message appears in the restore section, saying "Windows could not find a backup for this computer." I've tried reconnecting the drive as well as restarting my computer, but to no avail. I can see and explore the files in My Computer, so I know the hard drive is properly connected.
View 7 Replies View RelatedHow to Create a System Image Backup in Windows 7 ?
View 0 Replies View RelatedIs there way I can change the location of the backup files location using the Win7 Backup Manager? Right now it just shows me the location for a USB port. I would like to use a Home Group Location.
View 2 Replies View RelatedWhen you wish to recover your system using this utility, do you use the Windows program at desktop or the rescue disc I created from the program?The reasn I ask is because I used to have better luck using Acronis' disc rather than the program and wonderd if the same applied here.Also, does the backup remove the existing one so that you only have one at a time or can you have more than one.
View 2 Replies View RelatedIs there a way to use Windows Backup to backup to a network drive?
View 6 Replies View RelatedI backup 100GB of data with Windows Backup and over the time where I do all my backups there is like only 30GB of data which changed from those 100GB and also new files were added. Now my external drive is full. When I now delete the very early backup, the first one where the 100GB of data was saved, will it delete then ALL those 100 GB, or will it just delete the previous versions of the files which were modified AFTER that time, which are in this case the 30GB I talked about? Because otherwhise I would then have in the end an uncomplete, messed up backup.
View 9 Replies View RelatedI currently use Vista Ultimate. I am preparing to move to Windows 7. Is it possible to restore files from Vista Backup and Restore Center to Windows 7 after a clean install?
View 3 Replies View RelatedI'm using Win 7 Pro and want to schedule several backups to my NAS. With Win XP, I was able to schedule multiple backup jobs, which makes things easier since I have 116 GB of data. I like to backup my documents, email files, etc. every week, but my photos, MP3s, etc. don't change as frequently so once a month is fine for that. Not surprisingly, the media collection takes much longer to backup, which is another reason I try to separate it from my "regular" backup.Unfortunately, Win 7 backup only seems to allow one backup job to be scheduled, which seems awfully limited. Am I missing something? Are there other free backup utilities that would work better, or do I need to shell out some cash?
View 4 Replies View RelatedI'm trying to backup Windows 7 to an external HD that currently is used to backup mac.eed to do to make this happen? I'm sure I'll have to format the ext HD then backup the mac using a different file format, but am unsure just what I'll have to do or how to do it.
View 4 Replies View RelatedCurrently my PC is set just they way I like so I thought I'd do a backup, the idea being that should something go wrong then I can just use that backup (on DVD's) to do restore my PC to the 'now' settings.
View 3 Replies View RelatedDoes anyone know what would cause the following backup error?
The backup was not successful. The error is: Windows Backup encountered a problem while determining additional locations of one of the users included in backup. (0x81000038).
Windows 7 Backup always stops around 58% when it tries to backup "Boot (C" What should I do?
Windows Sicherung bleibt stehen bei 58% bei Systemabbild von "Boot (C" wird erstellt.
I have a Win7 64-bit system and have been successfully using Windows backup on an approximately monthly basis. I ran it before going to bed last night and woke up to a "The backup failed." when I tried to create a system image of both of my hard discs. The error is "Incorrect function. (0x80070001)". I found a workaround solution at Windows backup or restore errors 0x80070001, 0x81000037, or 0x80070003 and looked up and found a number of "junction points", most rooted at c:UsersDilipAppData - but the problem is that there is no such folder.
View 9 Replies View RelatedI'm running Windows 7 Pro 64 Bit with IE 10, cannot get internet videos to play without disabling Active x filtering in internet options?
View 2 Replies View RelatedI will try to be as descriptive as possible. I currently have GoWifi to access my internet (my room mate has it to)But for the past 4 days my computer has been running horribly slow. I can't use a enthernet cable becuase "Gowifi" is only wireless. I use google chrome most of the time, but the internet is slow on chrome and explorer. I have tried the "ipconfig /release then ipconfig /renew" method. I have also tried to Reset WINSOCK, Reset IPv4, Reset IPv6, and then restarted my computer but still did not do the trick. I have tried various things from forums on other sites and this site but it still is not doing the trick.Is there Anything you guys could tell me that could fix my problem? And i do have a windows 7 computer.
View 1 Replies View Relatedi recieved my new lenovo z570 ideapad yesterday...i'll just put some of the spec down incase you want to know.
proccessor: intel i5 (second gen)
graphics: nvidia geforce
os: windows 7 64bit
yadayadayada...
anyway, after charging it up and turning it on, i started to install programmes and other bits and bobs. e.g ituens, flash player. just the usual essentials. i used the laptop to watch videos on Internet, genenral browing such as facebook, so in short, the internet was working fine. just before i went to bed that night i installed avg security (free version) and ran a full scan. when the scan finished, i put the laptop into hibernate, and went to sleep! happy in the knowledge my new gizmo was running smoothly!
just before i woke up i heard the laptop turn off as it had run out of charge. so i plugged it in and charged it up, then turned it on. this is where the problem starts...i connected via wifi however the logo at the bottom right of the screen showed the signal strength meter on empty, with a yellow star covering it. i clicked the icon, and it said, 'not connected, connections are available' and below shows im connected with 5/5 signal strength, but on 'limited access'.
1) there might be a problem with the driver for the local area connection adapter
2)there might be a problem with the driver for the wireless network connection adapter
there are 28 updates, but im unable to update them as i have no internet connection. i also cant connect via the ethernet cable.i cant roll back the drivers as there are no previously installed ones, and i cant update them as i am already up to date.my other laptop (acer aspire 5630 running on vista) works perfectly fine using wifi and the ethernet cable, so i honestly dont know whats wrong. after reading things on my acer about ways to fix the problem i came to the decision to restore the laptop to the time of my first installation which was adobe flash player (which i installed the day before.) i was unable to do a full factory reset as the only options available are to either restore to a backup, or re-install windows (which requires a disc, which i dont have). i also didnt configure a backup as i had only had the laptop a day!
I can no longer upload files to the internet. When I try to Internet Explorer 9 crashes and restarts. The same thing happens when I right click on a picture on the internet and try to save it to my computer. The only changes to my computer was I upgraded the Norton Anti Virus software. I've reinstalled IE9 and same thing. I tried reinstalling Norton and same thing.
View 5 Replies View RelatedI am trying to share my internet connection thru my laptop wit my ps3 but iyz not working for some reason.when I search for a network wit my game it finds the ip address but no internet connection.
View 1 Replies View RelatedI have a Dell Inspiron N5110, Intel core 3 processor, and Windows 7 ultimate 64 bit os. I have recently reinstalled windows 7 from the windows 8 os. I can't access my wireless internet, I can only get to the internet via hard wire. I have searched Dell and Intel for the network controller driver and the sm bus controller driver, but to no avail.
View 3 Replies View RelatedThe test result is under Windows 7 build 7000
1. Open backup and restore center
2. Set backup settings
a. Choose backup locations to local disk,for example f:
b. Choose [Let me choose]
c. What do you want to back up?
Only choose the folder of c:program fileswindows photo viewer
Do not choose [Include a system image]
d. Backup summary
Items are c:program fileswindows photo viewer
e. Save settings and start backup
Result:
There is no files under F:TEST-PCBackup Set 2008-09-29 032022Backup Files 2008-09-29 032022Backup files 1.zip
So, the question is why we can not backup this folder at the first time(it should be a full backup)
internet connection sharing: No internet access!?I am trying to setup internet connection sharing between my laptop (Connected to WiFi) and my pc which has no wireless connection. I've spent a day or two troubleshooting problems such as 'LAN' doesn't have valid configuration and such, i found a solution and I've got the two connections to be able to see each other, but i can't get an internet connection to go through.I have my ipconfig /all for both computers available: (Both have had excess trimmed off to save on character limit)[CODE]
View 9 Replies View Related