Can't Get Passed Boot From CD
Sep 7, 2009
I recently sold a hard drive and wanted to use the Windows 7 installation CD to format it. I booted from the CD-ROM, it booted all the appropriate files and I proceeded to a custom install where I can add/remove partitions/format etc.
The drive I was formatting was a secondary, please remember that.
Anyways I did my business, took the CD out and booted from the main drive but now it keeps asking me for the boot CD to install Windows because it is referencing the files from the above task. My main drive has Windows 7 on it.
I can't get around it, I tried to go into the CD and run a repair .
How the heck can I get past this and back to my Windows 7!
View 9 Replies
ADVERTISEMENT
Apr 6, 2012
My laptop boots to the splash screen and then hangs. I tried loading Safemode and it hangs at the screen indicating the list of drivers it is loading.
View 3 Replies
View Related
Apr 29, 2012
When I turn on the laptop (Dell Inspiron) it gets to the Resuming Windows screen then goes to a blank screen and then hangs forever.
There is just a blank black screen and the mouse cursor. I can move the mouse cursor but there is nothing to click on. F8 does't seem to take me into safe mode or anything like that.
I can get into bios and boot menu before it gets to the Resuming Windows screen but don't know what to do there.
View 2 Replies
View Related
Dec 21, 2011
i have an hp touchsmart tm2 tablet with an intel i3 processor. i started having problems after a windows update. at first it was freezing often, then once in a while it said it wasn't an authentic version of windows (but it is), then on random occasions it was telling me i had hard drive problems. Then it started freezing completely after 2 minutes of use, and now it won't even get passed the windows startup screen.Every time i start a scan of any sort it gives me the "scan failed" message, restarts and gets stuck again.
View 1 Replies
View Related
Dec 9, 2009
M/c starts with a nice blue screen with left and right icons and mouse cursor all operatig .It will go no further.
when this first occured it went into Repair mode twice - said it could not fix and pointed to System32 DriversWDF01000.sys.Subsequent use of Repair now shows no errors.
Booting to Repair from my installation Disk reports eveything as OK.Moved to Restore point - section shows only one point of todays date -which apparantly was made before an automatic update - ran OK.
I have run SFCscannow but cannot interpret it. - sent to rapiddatashare -lost the ref No. for the moment.
View 5 Replies
View Related
Feb 23, 2012
I have an Asus M2N-E SLI motherboard, a W.D. SATA WD300HLKS hard drive, and a SATA DVD R/RW.I'm trying to install Windows 7, BUT I can't get passed the... "To install device drivers to access the hard drive, insert media.................... ..... Press OK to continue. If I hook up a IDE drive it will find that. I've tried for hours to find a solution and/or drivers. Tried Asus, NiVidia, Western Digital,
View 9 Replies
View Related
Jan 4, 2012
[code] Reboot and select proper boot device or insert boot media in selected boot devic &press any key
View 4 Replies
View Related
Mar 21, 2012
when I turn on my pc I get the follolwing error message "Reboot and select proper boot device or insert boot media in selected boot device and press a key".
View 1 Replies
View Related
Dec 1, 2012
I am having a problem starting my PC! I have to start it in the boot menu under the RAID option. If I do not do this a message saying "Reboot and select proper boot device or insert boot media in selected boot device and press a key.." comes up, and just keeps popping up regardless of what I press! I would try using my boot disk but for the life of me I can't find it, and as windows 7 was already installed on this computer when we got it 3 year ago, I can't accurately recall if it came with one!I am no expert on BIOS, but I have read other problems similar to this one, and know that if I don't have the boot disk or the OS disk, I will need to know that at least.I am curious if the (Hard drive) is the issue. The BIOS tells me that anything in parentheses is disabled from corresponding type menu.
View 7 Replies
View Related
Oct 25, 2011
I recently received a new laptop. After starting after time with no problems I received a blue screen with Verticle black stripes then it shut off. After attempting to reboot it I receive this error in a black DOS like screen.
"Intel UNDI, PXE-2.1 (built 083)
Copyright (C) 1997-200 Intel Corporation
This Product is covered by one or more of the following patents:
US5,307459, US5,434,872, US5732,094, US6579,884, US6115,776 and
US6,327,625
Realtek PCIe FE Family Controller Series v120 (01/26/10)
PXE-M0F: ExitingPXEROM.
Reboot and select proper Boot device or Insert Boot Media in selected Boot device press a key"
View 2 Replies
View Related
Nov 24, 2011
i am facing problem while booting before Reboot and select proper boot device or insert boot media in selected boot devic this screen is coming
View 1 Replies
View Related
Sep 5, 2011
When it crashes the cursor still moves and sometimes I can move windows around but then it all shuts down and sometimes briefly shows a blue screen of death. On reboot I sometimes get this message and have to reboot again. "Reboot and select proper boot device or insert boot media in selected boot device and press a key"It's a brand new box just built last week but no warranty and I would not even know what part to replace if it's hardware related.I've attached a Hijackthis to the post if it helps but I don't think it's virus related at all.
View 4 Replies
View Related
May 13, 2012
When left alone..."Reboot and select proper boot device or Insert boot media in selected boot device and press a key"I have a new(ish) cpu that I bought last Christmas, it works great and it has not crashed on me whenever I am using it. However, when I leave it on overnight (usually when it is downloading something big), when I wake up in the morning I am greeted with a black screen with the words:"Reboot and select proper boot device or Insert boot media in selected boot device and press a key"When this happens I simply press the power button a few seconds to turn it off, then turn it on again and it boots normally. (pressing a key only results in the message being repeated)What infuriates me is that it only ever happens when I leave it on overnight so I don't know when and how exactly it occurs but it almost always does. Like I said earler, it never does this when I am using it as it works fine otherwise. It just won't stay on overnight when I need it to.
System info:
Windows 7 ultimate x64 (full retail, installed once from scratch)
Intel core i7 4200k
Nvidia Gtx 560ti
16gb RAM
Seagate 500gb hdd for OS, 2Tb samsung and 1Tb seagate hdd for storage (all internal drives; no external drives attached)
Connected via hdmi to Pioneer receiver vsx 1121 then to 42" 720p Panasonic Plasma Tv
View 4 Replies
View Related
Dec 27, 2011
So I have been trying to get my computer running for a few days now. At first it wasn't booting at all, it would be a black screen with a blinking cursor. I have cleared cmos a few times, turned psu off, drained charge from psu, turned psu back on and got it working that way for about 10 minutes, then it crashed. Ever since then I can't get it to get running again. I think it says something about "fatal error" and then goes on telling me to boot into safe mode to remove any new hardware. Is it a hardware problem I'm having? If so, I'm screwed, too broke The best I can get is the screen where it says run windows normally or run in safe mode. But it will just crash on either option I pick. And when I try to run from the dvd drive with my windows 7 disc it's just a black screen with a blinking cursor. I'm not sure what to do...ugh I feel like it's something really simple to fix. I left my computer sitting for a few months and havn't tried to boot it until recently, so I don't remember if I put any updates on it or not.
View 6 Replies
View Related
Feb 2, 2012
i left my computer on in the morning and i come back and see this message reboot and select proper boot device or insert boot media in selected boot device and press a key i just installed windows 7 64 bit yesterday and built the comp a few days ago here are the specs
RAIDMAX HYBRID 2 RX-630SS 630W ATX12V V2.2/ EPS12V SLI Ready CrossFire Ready Modular Modular LED Power Supply
G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-8GBRL
Western Digital Caviar Blue WD3200AAKX 320GB 7200 RPM 16MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive
intel core i5-2500k
ASUS P8Z68-V LX
iHas 124b
View 1 Replies
View Related
May 7, 2012
I am running an Advent desktop PC and its stats are as follows; Intel Core i5-2310 CPU @ 2.90GHz 8GB RAM Win 7 64 bit.The problem I am having is when ever i boot up the computer it shows the Advent logo-screen where I can access the boot menu etc but then it goes to a black screen with a cursor/underscore flashing in the top left... This screen stays for quite a while and I am not sure if it stops because of a key I have pressed or just because it has run its course but after it disappears the computer goes back to the logo-screen for a moment and proceeds to boot up as normal except slightly slower than usual.It is a relatively new computer and it has no problems running at all once the boot up is complete it is fast and as friendly as ever.
View 4 Replies
View Related
Aug 11, 2011
I'm busy installing a computer for a friend but we're stuck at an error.This are the computer specs to start with:
Asus P8P67-M Pro Rev 3
1 TB Samsung Spinpoint F3 HD103SJ
Intel Core i5 2500K
Corsair 8GB 1600 mhz
Scythe Mugen 2 rev B
GeForce GTX 570
Lian Li Lancool PC-K56
Corsair CX 600W
Optiarc AD-72605 DVD RW SATA
The BIOS boot priority is 1# Dvd Player and 2# Harddrive (so it detects both).It's also a SATA harddrive so I don't need to do anything with jumpers.Then when I insert the Windows 7 DVD it outputs the following error:reboot and select proper boot device or insert boot media in selected The PC is new and got build at a store so the only thing I need to do is install the software.
View 11 Replies
View Related
Nov 20, 2011
Just installed a new Seagate Barracuda 500 GB replacing an exact model that has failed."Reboot and select proper boot device or insert boot media in selected Boot device and press any key."When I plug the old C drive back in it boots, but the new one won't. What should I do?
View 1 Replies
View Related
Jan 24, 2012
My laptop shows the following message when I turn it on- Realtek PCIe FE Family controller Series v1.19(08/10/09) PXE-EGI-Media test failure,check cable PXE-MOF-Exiting PXE ROM
Reboot and select proper boot device or insert boot media in selected boot device and press a key. I am using a Dell Inspiron N5010 with windows 7 OS.
My BIOS boot priority:
1st boot Hard Drive
2nd boot cd/dvd/cd-rw drive
3rd boot USB storage
4th boot Diskette drive
5th boot eSATA
6th boot Network
View 7 Replies
View Related
Feb 2, 2012
i left my computer on in the morning and i come back and see this message reboot and select proper boot device or insert boot media in selected boot device and press a key i just installed windows 7 64 bit yesterday and built the comp a few days ago here are the specs
RAIDMAX HYBRID 2 RX-630SS 630W ATX12V V2.2/ EPS12V SLI Ready CrossFire Ready Modular Modular LED Power Supply
G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-8GBRL
Western Digital Caviar Blue WD3200AAKX 320GB 7200 RPM 16MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive
intel core i5-2500k
ASUS P8Z68-V LX
iHas 124b
View 2 Replies
View Related
Apr 11, 2012
I just changed my PSU and upgraded my graphics card today. I tried booting it up and it came up with this message "reboot and select proper boot device or insert boot media in selected boot device and press a key."I'm pretty sure I got all the cables in correctly and I only have one harddrive. No externals.By the way, I don't have my windows 7 CD because I let a friend borrow it and I won't be able to get it back for some time. However, I do have a Windows XP CD if that helps in any way.
View 1 Replies
View Related
Jul 19, 2012
i dont have the proper boot device?
View 2 Replies
View Related
Mar 26, 2011
I cannot boot into Windows because it says that the file /boot/BCD is missing with an error code of 0x0000007. If I run Repair from my installation disk and in System Recovery Options, it says that it has detected problems and asks if I want to repair it. The items it wants to repair are: " The following startup option will be repaired:Name: {bootmgr}Identifier: {9DEA862C-5CDD-4E70-ACC1-F32B344D4795}
The following startup options will be added:
Name: Windows 7 Ultimate (recovered)
Path: Windows
Windows Device: Partition=C: (476938MB)
Name: Windows Recovery Environment (recovered)
Path: Recovery9426aa67-30ff-11e0-a348-506313b5e718Winre.wim
Windows Device: Partition=C: (476938MB)
A copy of the current boot configuration data will be saved as C:BootBCD.Backup.0002"If I click yes, it says that it cannot save the current settings for the BCD and refuses to continue. When I choose Startup Repair, it attempts to fix the problem but fails.
The problem details are:
Root cause found:
No OS files found on disk.
Repair action: Partition table repair
Result: Failed. Error code: 0x3bc3
I think that this is because Startup Repair is trying to fix the thumbdrive that I keep my Windows 7 install files in. I am overseas now and as my computer does not have an internal optical disk drive and my external drive is back home, thus using my thumbdrive is the only way to access the repair console.
I tried running a few commands, namely:
bootrec /fixmbr
bootrec /fixboot
bootrec /rebuildbcd
Fixmbr and fixboot work, but when I run RebuildBCD, it detects C:Windows as having a Windows installation, but if I type Y(yes) or A(all), it says that the requested system device cannot be found.
View 4 Replies
View Related
Jul 22, 2012
My Windows 7 has stopped booting after a restart, the system would just endlessly play the boot animation and not boot properly... system restore won't work, startup repair won't work, chdsk and sfc won't work. I have yet to try and see whether a Registry fix works. Windows loads the WRE VERY slowly.
View 1 Replies
View Related
Dec 25, 2012
this is what I did, since I have no CD-ROM, to install Windows 7 I created a partion X: NTFS and set it as the ACTIVE ONE, the put there the Windows 7 installation files, and opened prompt command to type bootsect.exe /n60 X: , next I restarted my computer, and automatically it booted into the Windows 7 setup, I installed Windows 7 on the partition C: and formatted the partition C:, everything installed and after the installation finished, a multiple choice menu appears that reads:[CODE]
View 6 Replies
View Related
Apr 10, 2011
Win 7 x64 Home Premium w/Gigabyte GA-EP45-UD3P, v.1.1 (P45), works great in IDE mode. (N.B.: eSATA port is just regular SATA port w/cable as provided by Gigabyte.) Trying to install external eSATA HDD. First I enabled AHCI drivers via registry. Then I turned on AHCI in BIOS. When I save BIOS and reboot, boot hangs when DVD writer performs sniffer boot, i.e., HDDs aren't found.
View 1 Replies
View Related
Nov 27, 2009
I Installed Acronis Disk Director Suite 10.1 yesterday on my Windows 7 and got this problem when it boots up I get the option to choose OS. Windows failed to start. A Recent hardware or software change might be the cause. To fix the problem:
1. Insert your windows installation disc and restart your computer.
2. Choose your langugae settings, and then click next
3. Click "repair your computer."
Status: 0xc000000e
Info: The boot selection failed because a required device is inaccessible.
Then I tried to run the Windows 7 installation disk, I go to the cmd prompt and run the
DISKPART
diskpart
list disk
select Disk X (X=disk where I installed all the OS, should be Disk 0)
list partition
select Partition X (X=partition containing OSX)
Virtual Disk Service error:
The pack is not online
and then i run the Bootrec /ScanOS, it came with 0 identified Windows Installations, this is why I come into the cmd prompt as I could not select the installed OS.
I've tried that from bootable cd to repair the install but the partition of windows7 is not recognized still.
View 0 Replies
View Related
Jan 14, 2013
I am receiving an error message on my Gateway One ZX4300-01e. It continues to ask me to: Reboot and select proper boot device or insert Boot Media in selected boot device and press a key.I bought this computer on ebay. it was a seller refurbished item and does not have a boot recovery disk.
View 8 Replies
View Related
Oct 10, 2011
I bought the bleeping Dell Inspiron 560, was to rapidly tap F8 during startup to bring up the "Advanced Boot Options." I saw the guy at Best Buy do it but it did not work on my machine when I got home. I'm using Windows 7 Home Premium. The computer came without a manual or any disks.
View 4 Replies
View Related
Dec 24, 2012
I have a laptop with broken lcd. So im using it now as desktop, connecting it to an external lcd monitor.Last night I suspected a worm and tried to boot up in safe mode by pressing F8 but couldn't make it work because windows only activate the external monitor by the time it has finished loading drivers. The result was it keeps booting into normal mode.So, I remembered there's another way to boot into safe mode by accessing boot options in msconfig...Now I'm stuck with safemode and cannot do anything because safemode doesnt enable external monitor. I know for sure that I could enter password and get into safemode but I can't tell what should I press or click to access to that msconfig windows again to return boot options to normal state.
View 5 Replies
View Related
Mar 28, 2012
I just put together a PC from scratch and when i start my computer it says:
reboot and select proper boot device or insert boot media in selected boot device and press a key.I put in a copy of Windows 7 Home to boot, and it just continues to say that when i restart/press a key.
View 1 Replies
View Related
