My memory: MXD3C13334GS :: Memory :: Products :: Mach Xtreme Technology
There is no note on the stick upon the memory sticks; Right now the CL is 9-9-9-24 (auto in bios)
Is there anyway to find out whats the true CL ?
I know that bad voltage settings may cause a bad mem test and BSODS. wrong CL settings may have a similar effect ?
I have a MSI GX640. it's default memory is the 2x2GB DDR3-1333 (Max 2x4GB) DDR3-1333 @ 9-9-9-24 Timings Recently I decided to do upgrade my memory from the total of 4 gbs to 8gb the type of memory i'm using is this Then I started getting rampant BSOD. I wasn't sure what to do, so I did so did some research. I was told that the memory clock speed or something could be off. I used speccy to identify what I had, it says this.
RAM
Memory slots
Total memory slots 2
Used memory slots 2
Free memory slots 0
[code]....
How to find type of my RAM memory? Processor is i7
View 1 Replies View RelatedAll of the sudden, I cannot view any (and I've tried many) images using Windows Photo Viewer. When I double click on an image, Photo Viewer pops up with the following message:"Windows Photo Viewer can't display this picture because there might not be enough memory available on your computer. Close some programs that you aren't using or free some hard disk space (if it's almost full), and then try again."First off, I have never been even close to low on ram or disk space at any point I have tried to view an image, and in the past I could be running SolidWorks with huge assemblies open, and I could have large images open in viewer without a problem. (is this really just more of a bug?) I saw some "solutions" regarding settings in color management, but none of them worked. The only other thing that might be relevant is, I do frequently plug the HDMI output into my TV, during which it switches to just a solo monitor output to the TV. I still get the same error when using the TV though.And in case it matters, I'm running 64 bit Windows 7 on a Samsung RC512 with 6G of ram and a NVIDIA GeForce GT 525M.
View 2 Replies View RelatedI cant find my photos after I inserted my memory stick
View 1 Replies View RelatedI cant find my photos after I inserted my memory stick
View 3 Replies View RelatedHow to find out what type of Windows memory diagnostics test was chosen. I know that the results are psoted in windows event log but I don't know which number or line corresponds to what type of test was used (standard , default or extended). I don't remember what type I've chosen and I really would like to know how to determine it by files in event log.
View 6 Replies View RelatedTestplatform HP Pavilion DV-5 Entertainment Notebook PC (4GB RAM, 2GHz dual-core) with MicrosoftĂ‚® WindowsĂ‚® 7 7048 x64 and Creative Sound Blaster X-Fi Surround 5.1.Driver:USB_W7DRVBETA_US_1_01_0091.exe. Tested with clean installed OS and only this driver.The Sound Blaster X-Fi Surround 5.1 is connected with optical TOSlink to a 5.1 Pioneer reciever. There occures great (and increasing) latency while playback of videofiles.-Sound will very noticably loose sync from video within a minute (all filetypes, not a codec problem). The latency will not occure with the internal notebook speakers, nor on same system with MicrosoftĂ‚® WindowsĂ‚® Vista x86. The Notebook ships with HPs "AMD USB Filter Driver" that should improve the performance of USB accessories, such as USB speakers or a USB TV tuner. I have tried to install this also on the testplatform to resolve the problem, however even though it seems to install fine the latency/syncproblem still resists.
View 2 Replies View RelatedHave been optimizing my windows 7 alot recently, i always do it when i reformat as it runs alot more efficient. Something i never did though was get my latency down. I had an issue were my latency was spiking to 1700, so i uninstalled my network driver and that brought my ping down alot, it spikes as high as 160 roughly. Is that fine for gaming or should i expect alot less? I have done the ping fix and other various tweaks to my nextwork and that seems to be the lowest i can get it.
View 4 Replies View RelatedI've been having DPC latency problems lately. It seems as if the latency ONLY spikes when using the internet. That's it. I play music in the Media Player; latency is fine, sound is fine. I play Halo and the sound is fine. I don't get it. Does the internet effect the latency? It only spikes when I'm watching a video or listening to music while online.
View 1 Replies View RelatedRecently I upgraded my computer hardware to a new motherboard, graphics card and processor. I moved my old hard disks (from my old hardware) into this new computer, turned it on and it started right up, I just had to re-validate Windows 7, which went without a hitch.Yesterday, I bought a new headset and started using it with my PC (before I was using desktop speakers), however, when I turned on some music, I was hearing a lot of stuttering/static while it was playing. I had this problem before, but it usually only happened when there was a program running that was taxing the CPU, and that isn't an issue now.I read around for a while last night about the issue, and it turns out that it's something called "DPC Latency", so I downloaded all the tools and tried to troubleshoot it for a few hours before I went to bed with no luck.So far I've tried:
-disabling HPET in bios & switching it to 64 bit mode (it was on 32 previously)
-turning off Powermizer on the Nvidia card
-disabling all USB ports one by one
-disabling all audio and network drivers
-changing the power settings for the CPU and HDD (tried this http://www.sevenforums.com/tutoria [...] -dipm.html
-updated all my drivers except by BIOS so far (I haven't tried that because it seems kind of risky, but I suppose I would do it as a last resort)
Another issue I was having was with my processor making this high pitched whistling noise, but when I turn off "disable processor idle" in the Windows power management area, it stops making noise. The weird thing to me is, it changes my dpclat.exe from full red bars to this for about 1-3 minutes (but after a few minutes it just goes back to full red bars, 28000ÎĽs):Before I went to bed last night, I turned on a 2 hour audio track and set it to loop with LatencyMon running. You can see in the screenshot below that the main culprits are:
-ndis.sys
-ataport.sys
-usbport.sys
-dxgkrnl.sys
-HDAudBus.sys
I've looked around on how to fix these individually, but I can't come up with anything at all. If I purchase a PCI sound card, would it fix these issues? I would prefer to fix it without having to do that, but if that's the only way to fix it for sure I can do it.
Recently the sound from my speakers has started to crackle when I am in a game and also when a UAC window pops up. I have used DPC Latency Checker and seen that when the audio crackles, the latency is very high. This screenshot shows the results of a UAC window popping up and being closed at the point when the bars are red.I was hoping it would resolve when I re-installed windows 7 and updated my drivers but the crackling still persists. By checking DPC latency when some devices were disabled in Device Manager one by one, I noticed that without my graphics card (nVidia GeForce GTS 250 512MB) driver installed, the audio crackling and latency was gone.
View 8 Replies View RelatedI'm looking to buy new DDR3 memory but I am totally puzzled by the CAS Latency and the numbers.It seems like the difference between a stick of DDR3 with 11 11 11 and 7 7 7 is only measured in nanoseconds, so how would the end user, we humans actually notice the difference between these specifications, or in fact can we at all.
View 1 Replies View RelatedCan someone do a speedtest using the server in New York, NY?I've been getting an latency error everytime. Other servers work fine and the one in New York worked before. It's the one that's nearest my house, so that's what I generally use.
View 1 Replies View RelatedAfter about 24 hours of booting my computer, I have seen my DPC Latency spike tremendously. At first, I thought this was an issue with my network card (since disabling it would drop DPC Latency), so I bought a new card. The problem didn't go away, so I realized it was something else. High DPC Latency is a problem since it causes audio and video lag.
As I troubleshooted the issue, I have realized the spikes were caused from network activity. For example, when I am seeding [not necessarily uploading] many torrents or am loading a website, it shoots up.
Does anyone know what may cause this and how I could prevent it?
I downloaded the DPC Latency checker and I've been getting a lot of spikes. When I open my laptop and start the checker, it's all green; but as soon as I open Chrome or Firefox it starts to spike. It's spiking as I'm typing this. It's reached 65,795. I've disabled devices to try and find the cause but I can't figure it out.
View 2 Replies View Relatedive been revieving some stutter noticibly when playing and form of video or audio and it has been getting worse as of late. Overall performance has dropped as well.Ive tried using Latency Checker and Latencymon and Realtek Ethernet Diagnostics Utility to try and diagnose the problem and the closest thing ive come to is that it has something to do with 'Realtek PCIe GBE Family Controller' as when I disable it the stutter appears to vanish and latency readings drop however I need that to connect to the internet so keeping it removed is not really an option.I have tried using a variety of drivers and methods from this forum and others and none have come to be of any use as of yet. [url]...
View 2 Replies View RelatedI received my copy of Windows 7 Home Premium. I skipped the Vista bandwagon, so I was moving directly from Windows XP Service Pack 3 (32-bit) to Windows 7 Home Premium. I opted to install the 64-bit version of Windows 7, as I had no issues when running the 64-bit beta.
As it turns out, I seem to have encountered an issue with my network adapter on Windows 7. Using any speed test site, such as speedtest.net, I get an extremely high ping (500ms +). I have tested another machine behind my router running Windows XP and there is no problem. Also, on the speed.io website, which tests connections per minute, I can only get around 200 on Windows 7, whereas I could get 2000+ on Windows XP with the same hardware.
Strangely, in games like Counter-Strike: Source, my ping is normal and in the 25-60 range on most nearby servers. Also, when running the ping command from the command prompt, most servers return a result lower than 100ms ... which is also normal. So, I don't understand why on speedtest.net, pingtest.net, and dslreport's flash speed test.. I get a ridiculous ping time of 500+ms. Web browsing does seem to be slow as well, as images take longer to load then they should.
I'm not sure whether this is a driver issue, or what. I have tried disabling both my firewall and AV software, so they are not at fault. I've tried 3 different version of the drivers for my NIC. One from the Gigabyte website, and two from Realtek's website (they released an updated version yesterday). My motherboard is a Gigabyte GA-EP45-UD3R (rev 1.1). I have all of my system specs listed on my profile if anyone needs to know more.
We are having ongoing problems with Windows 7 and mapped drive latency on our network. Our environment is as follows:Multiple servers running Windows 2008 & 2008 R2, some VMware servers (including our file server). Windows 7 x64 came preloaded on a brand new Lenovo think-pad, 4gb memory. This occurs on 4 different laptops. This problem ALSO occurs in exactly the same way on an HP Compaq x64 desktop running Windows 7 32. All systems are fully patched & up to date on SP's. Running IP 4 & 6 on all servers & Windows 7 machines Connected to GB Cisco switch.We run login scripts via GPOs that map drives (with net use commands) to 3 shares on our file-server, drives G, H and S.A fourth mapped drive to an IBM I-series does NOT experience these issues.
In Windows Explorer, mapped drives may or may not appear with red X's, but when clicked on they hang with a spinner and the green bar at the top of Explorer begins to run. This occurs randomly, but usually not right after boot up. It can take over a minute to complete. Also, in Word, which has references to these drives in file locations, file opening and saves can be very slow as it attempts to access these shares.This issue has delayed our roll out of Windows 7.Its unacceptably slow and cannot be used in a production environment.We have tried every suggestion we can find on the Internet:Turned off auto-tuning, indexing, thumbnails, set auto-disconnect to the max (both 99999 and ffffffff). Server & clients. No luck. Changed properties on the mapped drives to optimize for documents...no change.Changes setting on the network cards to disable flow control, set static link speed & duplex. Network drivers have been updated. Even tried using our wireless network and disabling wired connection...no change.All bios and hardware updates are completed...no change.Turned on and off network discovery..no change.
Disabled SMB2 on servers & clients...no change.Disabled firewalls, and unloaded antivirus (Trend)...no change.Safe boot with networking & clean boot with no services other than Microsoft...no change.
I was customising which icons I wanted to do what, and the clock dissapeared at some point. Now I can't figure out how to get it back
View 9 Replies View RelatedI have a digital clock that is synched with time.gov. but the PC clock always seems to lose seconds compared to it.
View 6 Replies View RelatedThe clock slows down about 20 min per day. It's fine before I upgraded to Windows 7 (along with BIOS update).
View 4 Replies View RelatedI have two computers which I upgraded to Windows 7. Both now have what I call clock freezes. When I click on the clock it does upgrade the time. Any ideas?
View 1 Replies View RelatedI recently got a used computer from a friend and I have discovered that the clock is always set to 2009-08-07. The clock cycles from 4:02 AM- 5:02 AM and it resets itself. If I try to change it then the computer becomes very slow and laggy, however, the mouse is not. I have run my anti virus to see if it is a virus but there was none detected. I suspect it might be something to do with my motherboard.
System specs:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz, x64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 3036 Mb
Graphics Card: Intel(R) G41 Express Chipset, 1294 Mb
Hard Drives: C: Total - 184886 MB, Free - 121869 MB; D: Total - 228188 MB, Free - 151259 MB; E: Total - 119999 MB, Free - 81271 MB;
Motherboard: Dell Inc., 07N90W
Antivirus: V3 Internet Security, Updated and Enabled
My clock stops "staying on top" after a couple hours after every time I boot. Since my taskbar is set to disappear, I like having a clock readily visible. Is this because I'm using a third party gadget, or is there a fix for this?
View 4 Replies View Relatedany alarm clocks for windows 7?im on x64
View 6 Replies View RelatedAt exactly the stroke of every hour my computer clock plays a sound. And it is getting really annoying. can anybody tell me how to stop it from playing that sound every hour. It has been going on for a week at first I ignored it and now its driving me up the walls
View 3 Replies View RelatedI am looking for a digital clock gadget. Please reply soon.
View 9 Replies View RelatedJust recently the clock in the bottom right corner of the desktop keeps changing!
it will change to a random date and time very regular.I will sync the clock but it will change again....can i stop this?
the one that displays on the lower task bar, right hand side, and see if it (now) displays the correct GMT (same as UTC) ? Since the start of the New Year, mine displays the wrong GMT, even though I'm pretty sure it is all set up correctly. Can't seem to get it to display correctly.
It used to.
