I recently created an ad hoc network to share the internet connection with my laptop.I've now stopped using it but cannot seem to delete it. It still shows on the list of available networks on my pc and network. I didnt save the network so it doesnt show in the list when i click "manage wirless networks".It goes if i remove my wireless usb dongle but then reappears when i plug it back it. Also it's still there after a restart. Is there anyway i can get rid of it? Maybe a command prompt to clear network history or something?
how do i keep microsft explorer from trying to surf and find other providers and stay on one instead of showing every provider it can connect too ant2twon@yahoo.com
I am doing some troubleshooting and I want to completely remove my network connection. I remember with Windows XP when I did this, it would re-detect the network card and reload the drivers and settings after I rebooted.
I can disable the connection but not delete. How do I remove the connection in Windows 7 x64?
My computer won't connect to the internet right now. My router shows that the internet is connected, but my computer says there is a network connection problem.
I want windows to start over and create a new network. This is my problem.
If I right click on the network icon in the taskbar and open "Network & Sharing Center" it opens and I click on "Connect to a network" it opens a window in the taskbar giving me an option to open the network & sharing center?! Which just starts the cycle over again.
I wan't to be able to see the network that windows has set up and delete it or create a new one but can't seem to figure it out. Windows 7 is too user friendly now that I can't find any of the advanced controls?
I have a Lenovo T61 that I upgraded to Windows 7 Ultimate from Vista Ultimate. Wireless networking works fine except for one profile that was used in Vista. When I try to connect to that particular site, the network attempts connect but always fail. The network trys to connect to a profile that was previously used in this situation, however the properties indicate Windows Vista. I believe if I could delete the profile, a new one would be created and connection could be made.
The problem is: I cannot delete the profile. I cannot locate it on the system. The only time it appears is when trying to connect to this particular site. A text file is generated when I use the troubleshooter. Read more at the forum...
I have Win 7 RC machine and i connect via network to a XP machine. I find myself unable to delete files from the XP machine. Trying to delete any file (either by shift+del or right click>delete) results in the file transfer window suck in the 'calculating' stage.
I am not sure what went off because till today it used to work like a charm. Any help would be appreciated!
I installed a program and then uninstalled it. However, I noticed there's a stupid shared network folder in my main "NAME-PC" network. How do I remove this? I would like to remove the "sbp" folder, but there is no "delete" option. No matter what I do, this folder cannot be deleted and is here to stay....even if I try to mess around with the sharing options. I am logged in as an administrator as well. I understand that my "Users" folder is the main one that I would like to keep, but I cannot get rid the other folder
I have the home edition. I'm trying to delete a "ZTE Proprietary USB Modem" profile. I've removed the program through device manager and it's gone, but it still shows up when I click on "connect to a network". My adhoc network is also there. How do I get rid of both of them. I'd like to start with a clean slate to get my Ad hoc network going. I've tried the "Manage Wireless Networks" but they don't show up there.
I've just installed a new draft N wifi router to replace my previous B/G router. Perhaps foolishly, I kept the same name for my home network. My new Acer TravelMate, which has draft N capability, was happy (but slow) on the old system and works OK when I connect it to the new router by ethernet. However when I to connect it via wifi it says "The settings saved on this computer for the network do not match the requirements of the network".
Okay so I just tried to add a new network location in the My Computer.
I set the network address as \MYLAPTOP but the program didn't let me do that because I need to specify a folder. I don't want to specify a folder because I just want to use the root folder. So I then typed it as \MYLAPTOP\ with an extra slash at the end. The shortcut was made but it didn't work so I tried to remove it.
Now every time I press "delete" on the shortcut Explorer.exe crashes and restarts. I tried this in safe mode with and without internet access but it always crashed.
Now I'm just looking for a way to manually delete the icon through registry or some other editor.
I have a wireless LAN sharing internet through a Mac Book Pro, i have no problems connecting to this with Ubuntu, an android phone, and other Apple products. The only system that i'm having problems with is the windows partition....The network is listed in available connections, but seems to have the wrong WEP key because it fails to connect. However I cannot delete the connection and start again as the network is not listed in 'Manage Wireless Networks'.
I'm stuck!! I cannot scan for updates because even when the notebook is plugged directly into the router it will not connect to the internet. I can just about get onto my neighbours WiFi network, but it is very poor strength and cuts out, so can't really use that. I know the hardware in the computer is fine because the Ubuntu partition works.
I have over 50 virtual networking adapters in device manager, I have posted this question in many forums, and still cannot get rid of these pesky unused extra adapters. I know they have been created by using Virtualbox, and by creating many virtual machines and updating virtualbox. Unfortunately, I have tried uninstalling virtualbox and the drivers all remain in devicemanager. DeviceMgmt also does not allow me to uninstall or delete the adapters, (When I do they just stay there, even after rebooting.)I most likely have to go into the registry and delete them, but they are in so many different places there, I need to know the correct place to delete them. I have a bet that this is the forum where I will get the answer for this even though I have posted in virtualbox forums, technet, MSDN, superuser, serverfault, and stackoverflow.
I need to replace a W2K computer on a domain with a Windows 7 computer(laptop), but I want to keep the same computer name.I need the ip, username, profile to stay the same. Can I delete the computer from the domain and name the new computer that name I deleted and still keep the users profile on the new machine, as if it was the old one?
I have a peculiar issue where I would need to have "Network and Sharing Center" open to be able to see that my my laptop's wireless connection. I would see the signal bar and also see the dreaded red x.Even when I have it open, I can see it refreshing each second; like its losing connection and reestablishing.My internet connection is working and has no issues.
Network and Sharing Center - Open Network and Sharing Center - Open and refreshed Network and Sharing Center - Closed
I'm having difficulty trying to get my new Windows 7 pc set up to share files across my existing home (wired) network which consists of 1 desktop pc running WinXP and 1 laptop running WinXP.I want the 'C' drive on each of the 3 computers to be shared. I've had the 2 Windows XP computers set up and working like this for several years without a problem but I can't seem to get the 'C' drive on the Windows 7 computer to do the same.All 3 computers have the same workgroup name and none of them require passwords to log on to Windows. There are no problems with the firewalls on any of the machines.On the Windows 7 PC when I right click on the 'C' drive and select the 'Sharing' tab, I have set this up to be shared and when I click on the 'Advanced Sharing' button there is a tick in the 'Share this folder' box, the 'Share name' is 'C'. If I then click on the 'Permissions' button, this shows a 'Group or user name' 'Everyone' and this group has Full Control, Change and Read boxes ticked. As far as I can see there is nothing more I can do.
However from my Windows XP computer, when I go to My Network Places and double click on the icon for the Windows 7 'C' drive, I get the message "\Computername is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The network path was not found"I've subsequently set up a sub folder (of the Windows 7 'C' drive) for sharing by right clicking on the folder, choosing 'Share with' and then selecting 'Specific people'. I then set up a group called 'Everyone' with read/write permissions. Now I can navigate to this folder from my 2 WinXP computers.
My rig uses a Centrino Advanced-N 6230 wireless mini half-card. It reports the correct name except within the wireless network list. Instead of 6230 it reports 6320. I searched the registry to see if I could find the error, but nothing found. It's only a nuisance, and a minor one at that.
Unable to see home network computers in Windows Explorer Network screen.
I have a home network with 2 laptops and 1 desktop. The desktop I use as a "file server" in that all work done on the laptops is stored to the desktop. The desktop computer name is HAL. One laptop is fine and sees the network. The other just stopped seeing it; rebooted the laptop; rebooted HAL; did a number of refreshes without any luck. I opened EXCEL and found a worksheet that was listed that I knew was saved on HAL. Was able to open the file and when I tried the SAVE AS I could navigate through all of HAL just as normal. Went to Windows Explorer and still no HAL listed as a COMPUTER on the NETWORK. I have a internet connection so I know I am making it to the router at least. And when I check NETWORK AND SHARING CENTER it shows an active home network. The laptop is running Windows 7 Home Premium Service Pack 1 Build 7601.
This sounds really noobie of me but is it possible to improve local network transfer speed by adding a 2nd network card. I was planning to connect one exclusively for lan transfers and another one hooked to a separate wireless router.
Right now only a maximum of 3 users can stream SD videos off the PC before it gets a little choppy.
The pc in question runs on windows 7 and it's board has built in gigabit, I happen to have a spare gigabit card.
Home network with Wifi and ethernet. Using 3x Notebooks and 3x workstations. One of the workstations (W7 ultimate) keeps changing between Public and Home. When this happens, the internet connection dies. I cannot see other workstations either when on public network. Workstation using wifi. Does the same on cable. When it changes to Public, it disconnects from the internet and I cannot get to the router even though it has the workstation has an IP(DHCP or static). Default gateway and subnet is correct. TCP v4 is being used and nothing else is enabled.
Why is this happening? - I have tried DHCP as well as Static addresses - Reconfigured NIC(Netgear WG311T), uninstalled and reinstalled it. - Removed Wifi connection and re-added it. - Changed auth type, encryption type and keys to connection
Have I covered everything? The only thing different is that I installed a new router - Duo Plus 300wr. It cannot be the router because all the other notebooks connect to it wireless and so does my iPad, Android device and tablet...so it rules that out?
My problem is windows 7 hangs and freeze when access 2003 server Enterprise edition. This is not a small network, one of the biggest network.i have doubt on individual users on domain. before 2 months we had department wise users mean, for example Accounts@domainname.local. But after we created the individual users like john@domainname.local to all users. this is i believe the cause of problem. When we acess the server via the software it freezed for 5 seconds and then repeat to normal state. And after some time it hangs for 2 minutes.
I disabled my network adapter then restarted and now the adapter is no longer showing up in my network connections. How in the world do I get it back? I have looked at other options (like under the registry which was suggested on a couple of places). I have never seen this happen before. I even reinstalled my drivers and still nothing. How do I enable it again?
Today, I managed to redecorate my bedroom; where my computer sat on top of a shaky, wooden desk. That desk is now gone, caput, and replaced by a much bigger, sturdier and prettier glass replacement.Before I dissasembled the computer to re-decorate, I was able to browse the internet at ease. There were no problems at all...However, after the new desk was setup - and all wires replaced in their correct slots, I find that I am unable to connect to the internet, or even the house's network! For the past year, I have been wired to the router using a RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet NIC. It was plugged into an extension cord, in my room, into the Ethernet port in the back of my computer. Downstairs, it's twin was situated no less than 2 feet away from the router - plugged into the first port.Now, when I boot up the computer, the network notification presents the following message: "Unidentified Network. No network access", and sometimes presents a yellow ! next to it. So, I am reduced to typing on my mother's laptop - which has no problems connecting to the network.I am able to use the ipconfig /release command, but unable to use the /renew - it hangs in the command prompt, then tells me that the DHCP server cannot be located. The IP, beforehand, was reverted to 169.254.223.117 - before all of this, I was 192.168.0.5?
I have a linksys usb600n (v2) using the Windows 7 driver from linksys. It installs and is displayed correctly in Device Manger - BUT it doesn't appear in the Network and Sharing Center as an adapter. This same device and driver were previously working just fine in this system - but I rebuilt the OS (clean install) after testing a number of security products out.
The initial install went fine - no problems that I remember - just plug in the adapter and install the drivers obtained from Linksys (Ver 3.00.01.0). I tried the same thing on the re-build and it looks fine until I go into the Network Center and can't set up wireless networking since the adapter does not appear.
SIW shows TWO (2) linksys USB adapters under Hardware/Network Adapters, but does not show the network adapters in the Network Information section.
Installed Windows 7 on two home-network computers. Everything appeared to be good, including networking, but I could not access printers (linked through each computer) with the opposite computer. Windows update offered an update for the Broadcom 802.11n network adapter, but when I installed the update I completely lost the network.
I had to revert to the old driver in order to reastablish the network. But the printers still are not recognized. The network adapter on the secondary computer is a Linksys WMP300N. I did try turning the router off for ten seconds with the updated driver but that had no effect.
I want to add additional icons to the 'system32pnidui.dll' file. That's where you pick which icon you want to represent the active named network in the Network And Sharing Center. I did a search in this forum on 'network icons' but didn't find anything. Aside from all the permissions restrictions what app can be used and what kind(s) of files will work in W7? I have lots of .png images that I would like to use if they will work. Lenovo T500 W7 Pro-64 Current Updates.
New windows 7 Home Premium desktop that can print when the printer is directly connected but can't print when the printer is connected to an XP pro pc. It can see it but we're getting a "driver cannot be found on the network" flag.
Recently when I try and connect to the internet my wireless connection network says it is an unidentified network with no internet access. This never happened before.
Okay so I've installed windows and everything is working okay except i can't connect my laptop to my computer via LAN because it won't let me change it to a HOME NETWORK. It is just gets set to an unidentified Network. any possible suggestions?
Also I've look at removing this from the services but its not running it when i go under task manager, unless it somewhere else.
