CD/DVD Drive Mounted To Drive E: And F:
Dec 13, 2009
I recently upgrade from Vista to window 7 and found a minor problem.
Under my computer the CD driver is mounted as E:
When I inserted CD/DVD in CD-ROM it opened as F:
Obviously I have tried to rename Drive F: to drive E: under computer Management. However, there is no Drive E: under Computer management. Only drive F:, When, I was tried to rename drive F: it didn't allow me to change to E: because it has already taken.
I have also openned regedit and looked under devices to change there. There is no Drive E: only Drive F: I changed and reboot the system and nothing happen. i.e not changed to E:
Is there any way I can Delete the E: drive under my computer so that I can change Drive F: to E: ?
View 2 Replies
ADVERTISEMENT
Feb 15, 2012
I have a clone computer that I built about a year ago. I put a 90Gb SSD in there and put win 7 on it. I also had 2 other hdd's in there from past computers. I was trying to use them as data disks so my ssd wouldn't get so full. Well since I never wiped them out from past computers they were getting close to full. So I took off all the data I wanted on one of the drives and then formatted that drive and mounted it to my ssd. It was working fine. Then one day I come home and turn on my computer and now it won't boot up. My SSD doesn't show up other than it being called the x: drive with only 31.4 MB on it. No kinda system restore points are shown, and a repair disk doesn't work, or even to try and reinstall doesn't work. It's like my computer isn't recognizing the ssd hard drive as my c: drive and the disk I just formatted is the disk they think is the c: drive.
View 2 Replies
View Related
Oct 19, 2012
I have lost the ability to access a mounted drive.Previously, I would mount the drive and it would immediately open, saying it was Q: shared drive...). I have never had a problem before.The drive is from a True crypt encrypted file - I can mount the drive by entering the password to True Crypt, no problem. It mounts, shows up as local disc Q:, but when I click on it, it will not open and I get a message saying 'You don't currently have permission to access this folder'.When I follow the directions to security, and access the properties, I add my user name and tick full control but it the says:An error occured when trying to share Q, access is denied. The shared resource was not created at this time.I have also tried giving permission to 'Everyone' but the same thing happens.(This is complicated by the fact I have been having other problems today.Basically,I used HP Support Assistant to download updates for my laptop, since then I cannot open the devices and printers box - it just hangs and does not populate. I have done system restores, followed instructions from this forum about turning on bluetooth support, printer spooling, resetting explorer, but nothing has worked.
View 5 Replies
View Related
Sep 21, 2011
I have two Identical hard drives [1.5T WD in external caddys with both USB2 & eSata connections]. Both have been in use since I built computer Dec10. Now I plug them in and their not visible anymore? Their shown as a usb or scsi drive but no assigned drive letter or their "name".Their showing in the Disk manager and I found I had to manually tell it to mount and assign a drive letter[then their useable]. I tried another removable drive that was USB2 & firewire and the same thing. USB2 ,eSata or firewire and their all not visable in explorer. Yet I can plug in a flash drive and I can immediately see it once loaded.Is there a switch in registry or somewhere thats controls this.All these drives were immediately available in file explorer previously? Now I am having to use the DM to manually mount and assign them to read/write to them.
View 1 Replies
View Related
Nov 14, 2012
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies
View Related
Dec 14, 2011
As the title says i've seen guides online but they're a bit confusing. I had windows 7 on my computer before. but it got a virus and the usb that I install windows 7 with died on me. So I installed windows XP on my custom machine with a 1gb flash drive using wintoflash. But now i kinda want windows 7 back so I can play games. Is there anyway to do this.
View 6 Replies
View Related
Sep 22, 2012
I had a sudden hard drive crash and have a system image back up on an external drive.I can't remove and replace the hard drive from the computer because there is about 2 inches of space to get a screwdriver in.I plugged my external drive into a laptop and followed the procedure for attaching a .vhd file.I have two files backed up on the same evening for some reason, 54 GB and 90GB.I couldn't get the 90GB vhd to attach properly until I unchecked the read only tab, it mounted, but I couldn't access any files.I clicked on the file, it asked me to click continue with admin control to permanently give access, it takes a few mins to load...but no files to open.
View 1 Replies
View Related
Jun 9, 2012
Looking at buying a new PSU as mine is only 375 watts and am adding new components. With a lot of the newer psu's the fan is on the top of the unit and not the back like mine. As I have no way to mount the psu at the top of the case (my case and board are both btx). I also have no vent holes at the top of the case. So am I able to mount it at the top with the fan blowing down? Will this cause any heat or ventilation issues in the case itself?
View 9 Replies
View Related
Feb 10, 2012
How can I keep a VHD image mounted after reboot?
View 3 Replies
View Related
Aug 21, 2012
I have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
View 2 Replies
View Related
Sep 7, 2012
I installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive. I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked. Can someone explain how to do this, please? I'm not completely computer illiterate, but I'm not familiar with partitioning disks. It was just the one time with Ubuntu.
View 4 Replies
View Related
Apr 25, 2011
I have Win 7 home premium on an HP laptop with 4 usb ports. I have 2 Western Digital Elements 1.5 TB drives for backups. If I plug in one of the drives, Win assigns a drive letter, but if I add the second one it doesn't.
To troubleshoot, I've plugged each drive into every usb port on the laptop, and each port reads each drive alone, but if I plug in the second drive while the first is still in, it shoes up in devices but does not get a drive letter. I tried assigning a different drive letter to the device plugged in first, but Win still doesn't assign a letter to the second drive.
View 1 Replies
View Related
Sep 23, 2010
My laptop is Acer with Windows 7 home premium 64 bit OS. It contain only 1 single partition disk that is c drive only.Recently, i accidentally convert the c drive which contain OS into dynamic disk.After i restart the laptop, it shows the following: BootMgr is missing Please press Alt, Ctrl +del to restart Now, i not able to enter the window. I am so worry because my important data is kept inside the hard disk, and i still not yet do any back up copy on it.I searching on this forum and learnt that i need a window 7 installation disk to repair it, but my problem is the computer dealer not give me any windows 7 installation disk when i baught this laptop as their said all the driver and windows program already kept in side the harddisk.I tried to remove the laptop hardisk which is a 500GB toshiba SATA hardisk. Then, i use the other laptop with Windows XP professional with the intention to copy yhe file inside the toshiba hard disk.However, after plugged in the hard disk to the other laptop, under the disk management, it shows that the toshiba disk as : dynamic disk, unreadable.i having problem to backup the data inside the toshiba hard disk.....
View 8 Replies
View Related
Oct 13, 2012
Background: I have a WinXP desktop machine with a hard drive that may have a virus/trojan/rootkit/etc. Normal scans on the WinXP machine with MSE or ThreatFire have not discovered the problem. But the best way to scan a drive is to remove it and treat it as a purely 'dummy' data drive plugged into a usb drive dock and run the scan from a clean machine. This way any infected programs and/or O.S. on the drive will have no control to mask or hide themselves. My other computer is an HP Windows 7 laptop. So I removed the hard drive from the WinXP machine and via the USB drive dock and the Windows 7 laptop saw the WinXP drive icon appear. However, double-clicking that icon results in the popup window message[CODE]
View 4 Replies
View Related
Dec 13, 2011
I've been noticing after re-installing Win 7 that I get random floppy drive seeks and the hard drive light flashes like crazy and then everything is fine again.I have Clamwin AV,Spyware Blaster and Spybot S&D installed,but that's it,no Windows Defender or Essentials AV.Any ideas what causes this? It's a minor annoyance,but I just want to make sure it's not damaging anything.Also would Readyboost help me? I've got 2 gigs dual channel PC3200 ram(or I could go with 2.5 gig single channel PC2700)and a P4 at 3 gig until I can afford to upgrade my comp.This is my first post in quite awhile so I hope this is in the right place
View 7 Replies
View Related
Jan 15, 2013
I installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive.
I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked.
View 2 Replies
View Related
Jan 13, 2012
How to Suspend or Resume BitLocker Protection on Windows 7 Drive ?
View 0 Replies
View Related
Oct 8, 2012
Before I even go further: yes, the "hide empty drives" has been unchecked)I had to reinstall my machine and I was able to to see the drive letters for the internal flash card reader. However I think something might have gone wrong when I give my external HDD a drive letter that was held by one of the flash card reader).I wrote "I think" because I am not really sure since I never wanted to use the internal card reader till today so I never noticed there was an issue. Anyway, the internal card reader does not show up even when I insert a card in the reader. Basically nothing happens. I have uninstalled the "USB Mass storage device" and it gets installed without any issue but the problem is still there: I can't see the reader. the INTERNAL flash card reader has a USB slot and when I insert a EXTERNAL flash drive, the EXTERNAL flash drive shows up.
View 4 Replies
View Related
Nov 13, 2012
Low disk space, Can transfer data on D drive to an external hard drive
View 5 Replies
View Related
Aug 13, 2012
I have a generic System 7 64 bit system with a 1 TB SATA drive. It has one hard drive which I have partitioned into 4 partitions, with C: being where I put all the system software. The board has mulitple SATA ports.Change considered: cloning the C: partition onto a new SSD so that I can get the performance boost of an SSD. There are some heat problems with existing hard drive so I probably need to change it out, so I would also like to clone the D:, E:, and F: partitions to a new hard drive.I have cloned a single physical drive to another physical drive, and the software (Ghost, or the like) usually handles it ok, so that all I need to do is adjust some partition sizes, and then disconnect the old hard drive and everyting is good. This includes cloning a single hard drive with multiple partitions to being cloned to a new single hard drive with identical numbers of partitions.Compared to my prior experience, is there something different about cloning one partition only vs cloning the whole drive. My proposed plan is:
1) Install SSD
2) clone C: to SSD only
3) clone D: E: F: of old drive to new drive.
4) remove old drive.
View 5 Replies
View Related
Oct 12, 2012
One drive appears to have duplicated itself by populating any drive letter thats free! Tried simply deleting the ones not needed but they reappear?
View 1 Replies
View Related
Feb 14, 2010
I have two hard disks-500GB and 80GB,so installed win 7 on 500GB HDD and 80GB was kept as slave.And i locked a drive present in 80GB using Bitlocker.Since week when i use win 7 ,after 20 min the display screen turned to black screen.So installed XP on 80GB drive.Now when i try to open the drive which i locked using Bitlocker is asking for format,that drive has important information.How can i retrieve the data from that drive?
View 3 Replies
View Related
Sep 17, 2012
My 750gb hard disk is failing on a HP laptop that came preloaded with Windows 7 home prem. I have a SMALLER excellent 500gb, 7200 rpm hard disk that I'd like to replace the failing hard disk with. I've read that my Windows 7 System Repair DVD will not restore my recent system image (on NAS) to a smaller partition. The C:partition on the failing drive is well over 600gb but can shrink to 300gb. QUESTION Can I restore a system image from my larger drive "as is". If not, and I shrink my C: partition (contain windows) ay 350GB will I be able to restore the system image to where windows will boot?I have an old copy of (7.0) partition magic that I used to resize partitions on XP machines Can this old 32 bit partition magic safely resize my C: partition. If so, and I create a new system image can I restore it to the new disk?
View 5 Replies
View Related
May 1, 2012
I've just finished building my new computer and I'm getting BSOD errors when first formatting a hard drive and secondly (after a successful format) installing a game on it.My boot up SSD drive seems to be fine, it's just my other hard drive.64bit Windows 7 Home premium. Full version I bought a a few days ago. The whole computer is new. If you need any further information, let me no.8GB RAM. Intel Core i5 2500k CPU. Radeon 7850 graphics. 120ish SSD. 1Tb hard drive. Asus P8Z68-V Pro gen3 motherboard.Edit:having just seen a notice, I've updated the post to contain two attachments. Or atleast I think I have
View 5 Replies
View Related
Jan 25, 2012
Check my Hardware specs for full information
Current setup:
C: Boot, Corsair SSD
D: Files, samsung HDD
D:/boot files/user/(all user account directories moved here, when possible) I'm wondering if it's possible to install games such as Assasins' Creed or Skrym, but install all game data to this folder?D:/boot files/programs/* Many installers allow you to define a custom installation path, But I am unsure if these games would ask for one or force me to install to the default directory?
View 9 Replies
View Related
Mar 24, 2011
Is there a way to reallocate unused space from D drive to C drive without losing any data?
View 8 Replies
View Related
Mar 7, 2012
My DVD optical drive appears as CD drive and doesn't react to any disc. The latest driver is installed.
View 5 Replies
View Related
Oct 18, 2012
Almost new Inspiron 5720- Home Premium. i7 quad.
After installing three or four updates yesterday my laptop now clicks the optical drive a couple of times as I start any video or music file on the hard drive. Not a fatal flaw, but, very irritating just the same. Did a system restore to the morning before the updates- same behavior remains. Installed updates again, removed them one at a time, same thing. Restored to over a week ago, same behavior! What is up with this clicking. The files start and play immediately, no problem there, I'd just like the optical drive to mind it's own business. Movie discs play fine, burns stuff fine, just go to your corner and SHUT UP!
View 6 Replies
View Related
May 19, 2011
I have installed a vitual xp drive on my windows 7- how do i use microsoft office (exel) from virtual drive
View 2 Replies
View Related
Dec 18, 2009
I'm really hoping I find an answer to this question besides the one I've found on the internet a hundred times over (That's not a good idea, you shouldn't do it).
My question is: Is there a way to allow a user to create/edit files in the C drive (system drive), and in the Program Files contained there? Let's assume that this user is not only a local admin, but a domain admin as well.
The reason for this is I work for a company that does a lot of editing within these areas of Windows. We need to be able to create and edit files where they are stored. I know one way around we've found is to copy the item out of the folder, edit it, and put it back, but this is a pain in the butt.
I also know that most program need to "run as admin", so that's not the problem either. I've given this user every right and permission in the Security tab of the C drive, and had it propagate down through all files, folders, and sub-folders, and still I'm hit with an error that says "Access is Denied" or another one saying that I don't have the right privileges.
Please, if anyone knows how to change this in 7 it would be much appreciated. I know that this worked in XP, and I'm not looking for someone to tell me "this is a bad idea so don't do it", or "maybe it didn't work right in XP". I have seen enough of these.
UPDATE: I have been playing around with saving office and wordpad documents into the C drive, and into the Program files. It seems that I'm able to do both now (for some odd reason), but I still receive intermittent errors when trying to edit or copy/paste or cut/paste from one location to another.
View 5 Replies
View Related
Feb 19, 2012
Why do files moved to an external drive not behave the same as those same files in an internal drive? I noticed that if I do anything to a file that is in an external drive, that file can not be saved under the same name (read only). In order to do so one must save it internally and then copy or move it to the external drive.So I did just that--I copied a file from taken from an external drive, saved it in the internal one and then copied it back to the external one. Now if I r-click the propeerties of these 2 same files and then go to the 'Security' tab a difference is immediately apparent: The internal one has -1- System & -2 My-computername (user-PCuser and -3- Administrators (user-PCAdministrators) with all 3 accounts allowing all (full control, read, write, etc..). While the external drive has in Properties; -1- System -2- Administrators (user-PCAdministrators) and -3- Users (user-PCUserrs) with this final 3d one (and different one) with no Allow for "full control, or modify or write. So how does one have all its files in this external drive behave and be equal to all the same files in the internal drive?Since -3- Users (user-PCUserrs) in the external drive is that which is differnt from the internal drive I was wondering if it is OK to delete this Permission or 'attribute' or whatever it is called and create instead one equal to the one in the internal drive -3- Administrators (user-PCAdministrators)? ANd of course doing so in one go and not file after file after file individually?
View 6 Replies
View Related
