Blue Yeti Mic Not Recognized On Startup
Nov 20, 2012
I recently purchased a Blue Yeti (Silver) microphone from Amazon. It was working properly at first when I plugged it in, but after I booted my computer the next day, my computer did not recognize the microphone and it was named something else in "Recording Devices". I had to unplug and plug the mic back into the usb port before the computer recognized it as the Blue Yeti microphone again. I am on Windows 7 Home Premium by the way. Is there a fix to this rather than replugging it back in?
View 3 Replies
ADVERTISEMENT
Jan 22, 2012
I have recently purchased a Blue Yeti microphone [URL]. Everything has been going fine with it, it is recognized in the usb port, and the volume is great, so is the quality. But this morning my house had a power surge and everything shut down, including my computer(duh). When i turn it on my mic isn't recognized anymore, and instead i get an error code 43 in the device manager program. It says the device is malfunctioned. But when i plug it into my usb hub, it works fine, it also works on my laptop just fine. I've reinstalled my usb drivers, and other devices work too (webcam, flash drive). Is there anyway i can "reset" all the usb ports? The only thing the mic shows up as is an unknown device, and i've uninstalled it's drivers and scanned for hardware changes too.
View 4 Replies
View Related
Mar 28, 2012
so i have a blue yeti, and i'm an online animator/voice actor. whenever i record audio on my blue yeti (or any other mic) i record about 4-6 inches from the mic, and turn the gain down enough that the audio doesn't peak as i yell or whatever. this is what you're supposed to do if you don't want your audio levels peaking and making your recording sound horrible and corrupted. however, afterwards, it means i have really quite recordings. not a problem right? now that it's recorded right, i can boost the volume of the entire clip afterwards right? wrong. i'm not an audio expert so i must be missing something. but why in gods name would the audio distort and peak after it's recorded successfully? it's all there, it's all clean audio. if i turn the volume on my speakers all the way up it sounds crystal clear! all i want to do is do that inside the computer so that when i upload it to Internet people don't have to turn their speakers so far up. but if i increase the clips volume in the computer, it distorts! it sounds awful! why?! i tried in sony acid and audacity and they both do the same thing! i can take sound effects, and recordings made by other producers and crank them up nice and loud, but mine just fall apart!
View 2 Replies
View Related
Nov 18, 2009
i brought a brand new HDD, motherboard and CPU, now ive tryed everything but the problem is, when the computer starts up, it goes through everything, gets to the welcome loading bit. the little circles spin around, freeze, blue screen then then computer resarts and repeates the same process. any ideas/solutions (iv tryed putting the disc in and booting from there, doesnt work)
View 5 Replies
View Related
Mar 20, 2012
Out of the blue this morning my comp wont start up, W7 blue screens before the login screen appears and instantly reboots. No new hardware has been added. Here is what I have tried.
Change graphics card.
Change RAM.
Memory diagnostic.
System repair.
Safe mode (works).
LKGC.
Uninstall AVS video converter (only new software installed yesterday).
Uninstall Daemon Tools.
System repair from Windows DVD (fails - incompatible version).
All I'm left with is a format and reinstall if I cant solve this - safe mode works fine so it must be fixable!
System specs:
Windows 7 Ultimate 64 SP1
AMD FX 4100
8GB HyperX RAM
HD 6770 Graphics
OZC SSD 120GB
ASUS M5A87 board
View 10 Replies
View Related
Mar 24, 2012
I just put together a brand new PC. I used the HDD from my old PC in this one, it has Windows 7 32bit installed on it.I start up the PC, everything sounds fine, I hear one beep, the BIOS screen pops up. Then, I get to the "Windows Error Recovery" screen. If I select start windows normally, I see the starting windows screen, then a blue screen pops up with the usual "problem has been detected...shut down to prevent damage" stuff. The technical information it gives me is: Quote :*** STOP: 0x0000007B (0x80D86A58, 0xc0000034, 0x00000000, 0x00000000)
View 3 Replies
View Related
Feb 24, 2010
The problem is, Windows 7 gives me errors when using programs such as IE, WoW, etc. Blue Screens. Often when I startup it blue screens to a dump screen. Problem is resolved by just rebooting. This issue seems to have been coming up when I installed a Galaxy GT 240 video card. Using CRT connection to my 42" LG LCD. Motherboard is Biostar G41-DVI, processor is Pentium D 820 which is set to 220 which gives me roughly 3.1ghz.
The fan is around 3k rpm and the temp levels are steady at around 31c. Could the issue be with the video card? It started actually the first time I installed it. Could there be a setting in bios I'm over looking. I have not tried to update the drivers for the card.
View 18 Replies
View Related
Oct 23, 2012
I start up my computer, the bios runs as normal detecting drives etc. then it gets to "loading operating system..", from here it either stays that way or changes to a screen with horizontal blue lines and if you wait a little longer still, other colored lines appear aside these blue lines. This all happens at the top of the monitor.I have tried to restart my PC several times and the same thing happens with these lines. I have also tried changing monitors, unplugging all inputs. Nothing.
View 1 Replies
View Related
Mar 21, 2012
I don't know if this is the correct area to be posting, so if you know where I should post this, let me know, and I'll move it. My friend had me fix his laptop for him, the laptop is a Sony Vaio PCG-384L. Here's what I've done so far. Try to replace Vista with Win7, fail. Won't boot from USB. Hook up laptop hard drive to my desktop, install Win7, success. Return laptop hard drive to laptop, Start laptop but When I start the laptop, it gets just past the "Starting Windows" Animation screen, and then I get a blue screen. The blue screen lasts about 10ms, so I can't get any codes.
View 7 Replies
View Related
Aug 24, 2009
I got win7 like a month ago and it was going pretty well. Just last week i got a new second monitor a 22 in dell and it was fine i ran dual monitors before with a 19 in with no problems. Now is when things started to go downhill. I was just surfing the web one day and suddenly my screens went black. I was like wtf for like 5 seconds then everything reappeared with a windows error box saying windows has just recovered from a Nvidia driver failure. I was like ok... i thought nothing of it but the next day when i turned on my computer i got a screen with red lines through it everything loads until it gets to the windows icon and then, boom blue screen of death. I then tried every single repair windows option. with nothing working. Even put in my old hdd witch has windows xp. still blue screen of death. Now i know you may be wondering why i did not try safe mode. See i have some unsigned drivers for my ipod on my pc so I have to click f8 at start up to chose disable driver reinforcement. If I do not my mouse and keyboard do not work. I can only run one f8 command so if i chose safe mode i will not be able to use any mice or keyboards.
View 11 Replies
View Related
May 9, 2012
For some reason, my blue swirly icon doesn't seems to be animating(spinning) like it should. My msconfig GUI is unchecked.Also, after that, it seems to be lagging for a few seconds. Programs taking a longer time to load.I bought this laptop 1 month agoIt's a i7-2640M 2.8ghz 64bit 8gb ram.
View 3 Replies
View Related
May 19, 2012
Today, my computer was booting up. It was taking a little too long, so i restarted.When i did, right after the loading screen my computer crashed and the BSOD (blue screen of death) error popped up. I cant access safe mode and i have constantly tried to check memory errors, i restored windows, and ran CHKDSK, all leading to the same problem. Here is the error code/ technical information;*** STOP: 0X0000007B 9OXFFFFF880009A97E8, 0XFFFFFFFFC0000034, 0X0000000000000000, 0X0000000000000000)
View 7 Replies
View Related
Dec 18, 2012
i have an acer aspire 5315 laptop it wont do anything. i go on start up repair and it says it cant fix automatically, each time i turn the laptop on its the same.
View 2 Replies
View Related
Nov 18, 2011
this problem happened recently after transferring around 1GBs of data into my hard drive. Nearly the end of the transfer, i realise the transfer stops at 99% so i decided to cancel it but when i clicked on the cancel button it doesn't respond and so does my desktop icons. I went on by pressing the restart button so it reboot but it gets to the starting windows screen but no animations of the 4 colours came up. Then it prompted me that my computer have problems loading windows so i selected startup repair but it get stuck at the blue flowery background with my mouse and it does nothing. I have tried AVG Tuneup as well.
additional info: computer not overclocked all on factory settings.
View 1 Replies
View Related
Aug 27, 2012
after turning on my laptop that have win 7 something happened <after the win 7 logo and the moving 4 colours of the start up a blue screened error appears say "a problem has been detected and windows has been shut down to prevent damage to your computer and at the bottom of the message Technical information *** STOP: 0x0000007B(0x80786A50,0XC0000034,0X00000000,0X00000000)" > and i tried to install a new windows drive C doesn't appear and the other drive is not a NTFS so i couldnt install a new windows even turning on the existing windows to take my files
View 4 Replies
View Related
Jul 2, 2011
My Windows 7 needs to getting past a blue screen at start-up after I restarted during a slow diskcheck I scheduled. The screen suggests disabling or uninstalling any anti-virus, disk defragmentation or backup utilities. It says to run CHKDSK /F to check for hard drive corruption and then restart the computer. I already tried safe mode but even that gives me the same blue screen. I assume the computer wants me to continue the disk check it started, but how? Restarting doesn't continue the disk check because it's been canceled with ESC. Is there any way for me to enter a command prompt so that I can type CHKDSK /F? I just want to cancel any problems causing this blue screen, whether that means forcing a disk check somehow or turning it off somehow. The stop number is 0x00000024.
View 4 Replies
View Related
May 24, 2012
I am trying to sell my Dell XPS L401X (XPS 14) that I bought in December of 2010 but I have encountered a serious problem with it. I loaded the computer from factory settings as it had blue screen and refused to start up without startup repair and dell datasafe backup or w/e that program is called. I loaded it up, installed Google Chrome, cleared my history on IE, downloaded MSE, the latest nvidia drivers and java 7 64 and deleted all those and emptied the recycle bin once done installing those. I shut down the computer to install updates and get a blue screen as soon as it passes the startup screen. Every time I attempt to launch using startup repair it just opens up another window with a black screen and the option of startup repair and normal repair, never actually going to startup repair, just continually refreshing every time I select startup repair.
View 1 Replies
View Related
Sep 29, 2012
I have a Zotac 570 gtx connected via HDMI cable to my Asus VE258 LED monitor.I've had this video card and monitor setup working before with the exact cable, card and monitor.Something changed in my system where the monitor is no longer recognized for what it is. When i go into my Nvidia control panel under change resolution 1.Digital Display, 2. DVI-PC Display - Resolution 1080p 59 Hz. There is no DVI cable plugged into the computer and the monitor is set on HDMI input. When i go to my Audio playback devices, the HDMI connection does not show up at all, even as disabled or disconnected.When i go to play a game (Diablo 3, Skyrim, Farcry2) The game either doesn't open (skyrim) giving me the error that resolution is not recognized (but then does not give me any resolutions to choose from in the options menu) or will play (Diablo 3) but is stuck on extremely low resolutions with only 2 options.
Here's what i've done. Contacted Zotac and had them send me the most recent drivers for the video card. Uninstalled originals and re-installed the new ones. Contacted Asus (they say its not the monitor as long as its set on HDMI input) I am unable to find a driver that will make my computer (Windows 7) recognize the monitor for what it is. Zotac failed after their attempt with the driver and told me to RMA the card. So i did... i waited a month.
View 7 Replies
View Related
Jan 14, 2011
Ever since I bought my new computer and installed Windows 7 64 bit Pro I have noticed that sometimes when I start my computer the startup locks up or crashes, requiring me to restart or it takes me to the system repair screen and running this process does nothing.
View 9 Replies
View Related
Jul 27, 2012
i used to get the BSOD very often so i decided to recover the system to the initial state . i did that and everything was fine , then i updated the windows 7 service pack 1 and finished the installation and rebooted my computer , the start-up at least took half an hour at that time and the service pack 1 installation showed "not successful " i tried to again to update the service pack1 which showed 73.6mb - 892.6mb so i updated it again and again the same thing happened.
View 7 Replies
View Related
Feb 18, 2012
I have a Dell Inspiron and a while ago I shut down my PC and the next morning I was faced with options to repair my computer. It hung on the screen for ages before it actually came up with startup repair and supposedly fixed the problem. A few days later, everything got very slow and started to freeze a lot and before long, booting the computer got very slow as well as it hung for about ten minutes on a black screen after the 'welcome' screen before finally starting up. I decided to reinstall the operating system (I did NOT reformat the C drive), so I borrowed my Grandma's external hard drive and copied my files. After reinstalling using a Dell Windows 7 64-bit Home Premium Re-Installation DVD, I copied and deleted the files off the external hard drive onto my PC (I didn't know it would create a Windows.old folder) and started installing programs. Then I left it overnight to install quite a big program. This morning, somehow it had turned off. I turned it on and it gave me the safe mode options and a 'start windows normally' option. I chose the latter and after typing my password it hung on the welcome screen again. I left it for ages and it just went back to the user login screen again. I pressed the red button in the corner to shut it down but it just hung once again on an empty screen so I did a hard shutdown (held down the power button). I turned it on again...startup repair. It gave me the option for system restore, which I did (then realising when it finished that I hadn't made a backup). I booted it, and again it wouldn't start properly. At this time, safe mode booted fine. After trying various things (even using a compressed air can to get rid of dust) and a few hard shutdowns, suddenly every option from the advanced boot menu took me to startup repair except 'Repair your Computer' which gave the normal options for repair (although now it only gives me 2, Startup Repair and DataSafe Restore and Emergency Backup. Now when I do startup repair, some times it says it has fixed the problem, and sometimes it says it cannot be fixed automatically and gives me information on the problem (a few things it said were: 'StartupRepairOffline', 'AutoFailover' and 'CorruptRegistry').
I can't reinstall my computer because then I would lose my precious files.
Is there some way I can save my files and reinstall or even just save my files somehow or am I screwed?
View 1 Replies
View Related
Feb 11, 2011
My hp dv3t has been giving a message about checking a disk for consistency every time I reboot(ed) for about a week now, but today it froze after the countdown reaches zero (for bypassing the procedure)�nothing I do can get it past this step. What do I do? I tried booting from Safe Mode, it listed a bunch of drivers but then froze.I'm using W7 64-bit Home Premium.
View 3 Replies
View Related
Mar 15, 2011
Trying to disable some of the bloatware that came with my HP G62, as well as disable unneeded auto-updates, and have been blocked from doing so.Ran msconfig, startup entries... Unchecked, hit "apply" and they just become checked again. (Ran as administrator on admin account)Tried "Tuneup Utilities." Same effect.Have been trying to disable Yahoo Messenger from starting and it just keeps on starting.I have unchecked the startup box in the pref dialog of the prog.Is my admin account not really admin? (No other accounts on the computer)
View 8 Replies
View Related
May 17, 2011
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 64 bit
Processor: AMD Athlon(tm) II X2 240 Processor, AMD64 Family 16 Model 6 Stepping 2
Processor Count: 2
RAM: 2815 Mb
[code]....
Antivirus: The Shield Deluxe Antivirus, Updated and Enabled DISPLAY MODEL: All I got with it was mouse and power cord On Startup, I get icons for the Administrator and Standard user. Clicking on the Administrator gives me a desktop with an on-screen keyboard; the computer keyboard disabled, and a panel saying,"FAILED, The application has failed to start." Going back and clicking on the Standard User icon gets me running for the most part. Here's the BIG problem. Every time I try to install any program, the User Account Control box drops down and asks for the Administrator Password, plus the question,"Do you want to allow the following programs to make changes to your computer?" You click "Yes", but, since no one is in the Administrator office, your installation comes to a halt. This blocks "Install" and "Uninstall". I get lots of messages I need Adobe Flash Player. I've trie over and again to install it, going to Windows 32 bit, but can't uninstall my previous tries. It will always download, and that's all. I've tried to install my digital camera's CD, but can't.
View 6 Replies
View Related
Jul 30, 2012
the Startup screen. So I went to the Startup repair tool as was recommended, but after few tries nothing has changed. So I tried to recover to previous recovery point, but also nothing. Then I tried booting to Safe mode, and I saw that during the loading process there was no file shown as succesfully loaded. I might also know what could be the cause of this problem, because yesterday when I was shutting Win down, there was a blackout so obviusly some files are corrupted.
View 3 Replies
View Related
Nov 29, 2009
I am running Windows 7 Ultimate 64-bit.
I have CPU-Z, Hardware Monitor Pro and Resource Monitor shortcuts in the startup folder.
If I go to MSCONFIG I can see that the items are there to be started during startup.
What am I doing wrong that will not allow these programs to start up?
View 8 Replies
View Related
Aug 17, 2010
I hate it when this happens and so far, the startup repair has always been able to fix the problem. Today, I'm not so lucky.
I'm using my other built right now coz I have to work. I don't remember what updates I did last night but I do remember the dvd drive firmware was updated.I popped in the system restore disc, start it up and the same page appears: Start with windows start up or Start windows normally. Tried both and neither one of them would bring up system restore. This built was only a month old and was hardly used so far so no system restore point was created at this point. I have files in it that I would like to keep but I can't get to them right now so a clean fresh install is needed but I can't get it up.
View 9 Replies
View Related
Dec 14, 2012
windows 7 startup repair on every boot but after startup repair hibernate works. How to fix?
View 1 Replies
View Related
Jul 31, 2011
my logitech m205 mouse usb isnt working it says that error "usb is malfunctioned and windows cant recognize it". i tried lots of things on off reconnect i even took out the battery.
View 11 Replies
View Related
Feb 27, 2011
I have a D-Link USB hub (DUB-H4) and it no longer shows up in windows 7. If I plug a flash drive directly into a usb port on top of my tower it shows up fine. When I plug it into my hub nothing.I tried unplugging the hub from the computer and plugged it back in to see if it would reinstall itself but windows does not detect it.
View 2 Replies
View Related
Feb 27, 2012
It worked fine before. It is the one in the actual computer - not a hub.
View 2 Replies
View Related
