I am starting QTP application from my laptop. I can see the application successfully geeting the license details, then i couldn't see the application in my screen. When i checked the Task Manager-> Processes, i can see QTP is running. I have killed and tried again, same output. The application icon is not even visible in the taskbar aswell. I have tried using the multiple screen options aswell
View 1 RepliesWhen I boot up my computer, it displays the animated windows7 logo as normal, but where it would normally display the login screen all I get is a blank screen with the mouse cursor. I've tried all keyboard shortcuts and random clicks to no avail - it stays on that screen for hours with occasional HDD activity.I've tried booting in safe mode only to encounter exactly the same problem, and have no previous restore points (which I know is a big mistake).Due to it not starting in safe mode either, I tried to replace the winlogon.exe file from another Windows 7 instillation to no avail - I still get the same problem.I am able to boot into linux (off my removable HDD) and windows XP (from my secondary internal HDD), so I am led to believe it is a corrupted file or dodgy setting within Windows 7 rather than a hardware fault.
View 9 Replies View RelatedComputer will turn on and go through the motions of start up, but when the log in screen should come up it black screens on me. It doesn't shut off though...? Just goes black. So beyond that I can't even get in to tell you what is wrong and I can't get the pop up back that said what the problem was.
View 1 Replies View RelatedI wanted to see if there was anyway I can get my computer screen from appearing sideways?
View 1 Replies View RelatedIs there any way I can force my wallpapers defined in my theme to appear at the login screen and when I lock my computer (Window key + L)? Also note that the wallpapers should cycle through their normal sequence and time at the login screen.
View 2 Replies View RelatedI have 'Acer Aspire 5755 model' laptop.Initially when I increase sound by Hot keys such as 'Fn+Up arrow' etc. system sound get increased with the sound icon on screen.However since some days, when i am trying to use these Hot key combination it is working properly but the corresponding symbol is not appearing on the screen.The problem is same for all other hot key combinations.
View 1 Replies View RelatedI recently made a thread on this forum talking about how my new PC setup has suddenly started creating lines on my screen
Link: Wavy lines across screen, (usually grey-ish colours) on new setup.
After trying a full list of things; 2 different monitors 2 different VGA cables 3 different mice 3 different keyboards change power supply change graphics card used onboard graphics switched ram sticks and removed one at a time reformatted a dozen of times unplugged all sound from computer checked motherboard for any visual problems and couldn't see any updated all drivers I could possibly think of Ran Memtest for 7 passes with no errors I've finally found out the problem and that was when I connected my graphics card using HDMI to a HDMI compatable monitor it worked fine and I had no more lines!
So it seems that using HDMI is working fine but soon as I use a VGA cable its not working and the lines are back. It only confused me more when I connected a VGA cable from another computer to the monitor it all worked fine.
As far as I can tell it's something to do with my computers VGA/HDMI settings, I've tried onboard VGA and that still didn't work so it doesn't seem to be a graphics card problem just something is stopping VGA working properly but HDMI is working.
I'm gonna have to go buy an expensive new monitor with HDMI compatability.
i am using windows 7 ultimate 32 bit, and when i install windows xp to install some software that is not compatible with windows 7, after i finish installing xp., the boot screen not showing options either ro boot windows 7 or xp, it just goes booting windows xp
View 2 Replies View RelatedOn several occasions now I've had a red-checkered design appear on my screen, either on the top & bottom borders of the screen, or covering the screen entirely. I took the opportunity to take a screenshot on the last occurrence but the image only captured fragments of what I could actually see. ImageShack� - Online Photo and Video Hosting Why is it occurring? How can I stop it?
[for whatever reason, the links do not wish to work. I think it works now.]
I have two partition, the c: and d: and I previously installed one windows 7 os on both c: and d:, I had then the choice to chose between the two on the startup, then what I did is restoring my c: drive to a image that didn't know it had another os on the d: so my os selection do not appear anymore on the startup screen. Is there any way to addup the choice to chose between the os on the c: and the os on the d: again via editing my current boot.ini?
View 3 Replies View RelatedMy promblem is, I shut down my computer earlier in the afternoon yesterday. I come back and turn it on and after running a minute or two, the fans are going like crazy and screen goes black, monitor goes to sleep. I manually hold down the power button, restart and choose the option to repair. Once again, after a minute or so fans start running hard, blacked out screen, monitor goes to sleep.My husband has tried F8 and we've tried going back to a restore point. It will start and sound normal, but when the fans start to run hard we know the screen will go black.Opinions from various people I know and from websites are stating it's my ATI Radeon graphics card. We've even tested the RAM, yet within those two minutes after start up, monitor goes black and states no signal or it's sleeping. We've also tried numerous monitors, just for sake of process of elimination.
View 6 Replies View RelatedWindows 7 64bit / Dual Displays / Microsoft Wireless Entertainment Keyboard 7000? When I type the number 1 or 2, the application window I'm working on jumps to that screen (Browser, Word, Notepad, etcetera). Screen one is on the left, screen two is on the right. Doing it right now as I type this. In other words, if I'm typing in a MS Word document on display two, and I type the number "1", the window jumps to display one.Possible culprit: I purchased a StarTech 'USB2DVIE2' USB Display module that facilitates adding a third monitor via a USB connection. Didn't work well at all so I uninstalled the drivers.
View 2 Replies View Relatedhow to run dos programe in full screen on windows7
View 5 Replies View RelatedHow to make the gaming application in laptop to work in full screen
View 4 Replies View RelatedOur office has an old program that we still need to use when upgrading our PC's to Windows 7. The program will run fine if you start a windows virtual PC and install and run it. However, based on the needs of our office, I need to be able to run Windows XP mode and simply have an icon for our users to click to take them to the application.If I install the program in windows XP mode, and then add a shortcut to the file under all users/start menu, a shortcut is placed in the appropriate place on the windows 7 machine and I can copy that shortcut ot the desktop. The program runs fine until you restart the computer. Once you restart the computer and double click the link on the windows 7 desktop to the program running in windows XP mode, it says:
Cannot start virtual application. The application is blocked from running as a virtual application.
I read some other posts saying to put a new shortcut in the all users/start menu folder. This works, but only until our users restart their computer. The next time the computer is up, the problem happens again. This is not an acceptable solution to have to create a new shortcut for each workstation each time the computer is restarted.
The error states:explorer.exe - application error The application was unable to start correctly (0xc0000022). Click OK to close the application.When I click OK, i just have a black screen. I can get the task manager going by hitting control, alt, delete. I've tried to start explorer.exe from the file menu, but get the same error.
View 1 Replies View RelatedThe application failed to initialize properly (0xc0000142) Click on OK to terminate the application.The only option is to click ok. I am deathly afraid to turn off my computer because my brother recently did and that caused it to freeze at the blue HP startup screen, but thats another thread. I get this error whenever I launch anything. I can't even open up the task manager. I really need help. I don't currently have a way to back up my stuff either but I am working on it. By the way, I don't know that my brother was having the same error message as i was or if he was having any error messages. I use zone alarm full security suite if that helps at all, I don't know if it deleted a registry file or something.
View 4 Replies View RelatedI tried to replace 3 files in the system 32 folder, and must have made a mistake along the way leaving my laptop inaccessible once logged on. The three files were:
uxtheme.dll
themeui.dll
themeservice.dll
I received these error messaged when logged on:dwm.exe - Application error the application was unable to start correctly (0xc000007b). Click ok to close the application.explorer.exe - Application error the application was unable to start correctly (0xc000007b). Click ok to close the application.Can system restore revert back the files so it was like i never attempted the patch?
I don't what happened but all of a sudden a message box opens up on my windows 7 laptop and it says this " the application was unable to start correctly (0xc0000142). Click OK to close the application" . I clicked ok but the error message box keeps returning back.If i remember properly, this happened when I tried installing some wallpaper.system seems to be working finw with all applications, but this message box is quite annoying.
View 1 Replies View RelatedAnd now I am so screwed. I can't even open services.msc, I can't install an update, I can't run updates and I can't re enable anything because I can't get into services to do it. Please don't say system restore because I disabled it.
View 2 Replies View RelatedI was just wondering if it is possible to reverse engineer a 32-bit application and recompile it as a 64-bit application. If so, would it still function?I don't know if talking about reverse engineering is acceptable in this forum or not. If not, my apologies.Also, I don't exactly know how "legal" it is or if it's against any EULAs.I'm a heavy browser user. I use Firefox Nightly and constantly have several tabs open. I also run several different applications at once and occasionally Skype. I'm CONSTANTLY hitting the 32-bit barrier for RAM (can't remember if it's 3.1, 3.2 or 3.3 GB) and I still have more RAM on my system. I'm thinking the video quality on Skype starts going south when I run low/out on addressable memory since it's a 32-bit application
View 9 Replies View RelatedI'm using Windows 7 Ultimate. I've been using it for some time without problems, but this morning I was unable to get on the Internet. Yesterday I'd installed an update for ZoneAlarm which I thought was probably the problem, so I uninstalled in and downloaded and installed PC Tools Firewall Plus instead. no my computer will connect to the Internet OK, but whenever I try to open most programs, I get the following error:"The application was unable to start correctly (0xc0000142). Click OK to close the application."The only two exceptions I've found are Microsoft Security Essentials and Internet Explorer which both work fine.
View 4 Replies View RelatedI'm trying to run a .bat file but when i start it cmd won't start and it gives the error message"The application was unable to start correctly (oxc0000142). Click OK to close the application."
View 2 Replies View RelatedSomeone just recently got a new Gateway all-in-one desktop computer running Windows 7. He has a slightly older HP deskjet printer connected to it. Each day, a second iteration of that printer appears and sets itself as the default printer. When he goes to print, nothing happens because it is sitting in the queue of that second printer. Yesterday I reset the print spooler by turning it off an on. When done, only the original printer appeared and everything printed fine. Today he called me and said the second printer was back and he can't print.
View 5 Replies View RelatedIt worked fine on Windows Vista. I just formated the first and installed Windows Seven on it. Now when loading up Seven, it says the 2nd is installed and working, but its not accessible and doesnt even appear.
View 1 Replies View Relatedwhy my system will no longer display the contents of my CD/DVDs? I have been going through some older CD/DVD (RW) that have various files on them, zip, jpg, txt, doc etc. Looking from Explorer 'Computer' the disk will show once inserted and state it has (for example) 23.2MB free of 702MB but when I select the drive to view the contents all I see is desktop.ini and nothing else. Strange since it recognizes the media has 23.2MB free which means there is data present.
Now, I absolutely know this system showed contents at one time (like yesterday)for anything I inserted to read. I've rebooted also. I can also move the media to another machine, running Linux ;-) and it displays the contents just fine. I have tried other media that I know I have recently written (from this system) and they show exactly the same thing now one file desktop.ini and that's it. I have seen this before under W2K, WXP and now Windows 7 but this system is brand new and much more modern hardware but never ever found a solution.
I've installed a new SSD as a secondary drive and it has worked for two days. At the moment, I can't see any mention of it in Computer (Windows Explorer) but the BIOS detects it.There is a screenshot below of the disk manager, I believe Disk 2 should be the 120GB Intel X-25M G2 SSD:Also, ignore the 8GB drive listed there, it's just a harmless USB.How do I fix this? I don't have any data worth keeping on it so I'm quite happy to get a blowtorch and format the drive if needed.
View 8 Replies View RelatedA folder named "Favorite Bar" keeps appearing in my Favorite list even though I keep deleting it. Is there some way to remove it from the registry for good?
View 5 Replies View RelatedLately on occasion the cmd.exe window will appear very briefly. Normally it comes and goes so fast that I cannot clearly see what is actually happening. Today it appeared and contained the words "0 files copied" which changed to "1 files copied" and then "2 files copied" before disappearing. This was the first time I could actually see what was written. About 5 minutes later it appeared very briefly again and I noticed the word "taskkill" before it disappeared.
View 6 Replies View RelatedI will be browsing or doing a lab for school and my command window opens up and closes so fast I am not sure what it is doing. It happens so fast but twice I saw what it said... 0 files copied and then 1 file copied...what the heck is my computer doing?
View 1 Replies View RelatedNone of my dialog boxes are not showing up. Meaning when I go to "save as.." nothing comes up after I click on that. The little right click menu appears but when I select what I want, nothing else comes up. It's not behind any other windows or open programs or on the edge of the screen anywhere. I believe I did a defrag and I did a sweep with AVG anti-virus but nothing came up
View 13 Replies View Related