It worked fine on Windows Vista. I just formated the first and installed Windows Seven on it. Now when loading up Seven, it says the 2nd is installed and working, but its not accessible and doesnt even appear.
i recently had my hard drive fail and im in need of a new one the one i have is raid 0 500gb hd and i need some prices on what i need to get a new one along with how to set up bios and a new os. i have a windows 7 upgrade disk and a restore disk if that helps.
I installed Windows 7 3days ago and I did not feel comfortable about it. It kept bugging out with almost everything and the performance on my games just became weaker than when I had Vista installed. Well, I tried to uninstall Windows 7 and get back to Windows Vista while using this guide here: How to restore a Windows 7-based computer to a previous Windows installation by using the Windows.old folder I used that command program in the "repair your computer" section in Windows 7 boot menu but I accidentally typed in wrong commands in there so I closed the command program and restarted my computer.
When I did that I actually thought that everything would be fine when I suddenly saw that I had Windows Vista and Windows 7 installed? I runned Windows Vista and hoped that I would work but only a blank screen came up after I clicked on it. Windows 7 did not worked eather because I had already moved my system files when I tried to switch back to Vista. Now I have reinstalled Windows 7 and the old programs that I had are on Windows folders, I now have folders that I should not have a such.
Its really really messy right now and I just want to clean my harddrive and download Windows 7 from scratch. I really need help with deleting everything in my harddrive and I want to know if the "Acer" screen after I start the computer will pop-up if I clean my harddrive because thats the only place I can boot Windows 7 from if I deleted everything in my harddrive.
I have a Western Digital Hard-drive that was in my old computer. I would like to buy an enclosure for it. Its interface is SATA; capacity is 80GB; RPM 7200. What kind of hard drive enclosure can I buy? I would like to use it as a backup medium.
I bought a new WD scorpio blue for my hp laptop. backed up all the data on my old hard drive, removed it, and put the new hard drive in. windows is not seeing it, and i'm not sure the bios is either. please help! i'd like to use the new harddrive (bigger capacity) instead of the old, but i don't understand how to have the system know the harddrive is there.
the laptop is an hp compaq 8510w. i had Windows 7 running it on for about 4 months. the new harddrive is the western digital blue scorpio 500gb.
I read about the fact that windows 7 doesn't reformat the harddrives and leaves all your old clutter on and just creates a new section of clutter.
I read I could pick to repartion if if restarted booting up from Windows 7 on the CD.. Which I did, but never saw any offer to repartion (which I would love to do because my drive on XP had to be spliced into 2 partiions because XP could not handle the size.. I would love to go to one partion.) But I know repartioning also reformats..
Anyway I guess I did a clean install (although I saw nothing that offered the clean install, but I know moving for XP to 7 needed that.)
It just forced me to put everythine into a windows.old folder (which I can't find).. And looking at my drive the either windows 7 is a REAL pig, or yup... my old data is eatting up my space with it's clutter. Although 7 is up, I want a redo.. Can anyone tell me how to do it right with a repartion and format?
I have a 1tb harddrive and it contains alot of personal items which i dont want anybody else opening, is there anyway to password protect the Harddrive so that when i click onto it from computer is asks for a password? or is there a way to password protect folders inside? any of these will work
I have bought a SSD drive on which i want my OS & programs etc and my main drive now as just data. Now do i have to start again reinstall W7 and the whole sha-bang onto the new SSD-HD? Or is there a easy way around this?
I would like to install windows 7 on my desktop. It is currently running windows XP. I'm not sure what i did but i wound up installing Windows XP "twice" on the C drive. I booted up windows 7 and installed it sucessfully but the windows XP is still on the drive.
I recently purchased a new HDD drive for my HP laptop. I was able back-up my data and create the restore disc. Once I install the new Harddrive and go through system recovery on the new HDD once the computer reboots to install W7 it does nothing. all it does is displays the HP emblem and the esc key does not do anything.
i play alot of music from my laptop, and everytime i close the lid my music stops and starts and plays for a bit and then stops and starts again, it happens all the time, i read in another forum that its because of the HP PROTECTSMART harddrive that helps ur drive from breaking from too much movement. now i feel its way to sensitive, anyone know how to disable it? ive tried looking it up in the control panel but im completely lost.
I have very annoying problem with 7 #7000/#7100 (not present in XP or Vista) - on random intervals, a couple of times per day the hard drive just blocks with it's LED constantly on. Windows still responds, except for operations involving the hard drive (like opening Explorer) - every program that reads from HDD just becomes "Not responding". Exactly after 2 minutes, everything is back to normal.
Drivers are installed, there are no unknown devices in Device manager.
Eventually a Windows 7 system will get corrupted. Can I have second instance of Windows 7 already installed on the hard drive for comparison and a fast swap?
I am hoping very much that someone can help me out of a catastrophic situaition after having done a clean installation of Windows 7.
The situation is that I used my 500 GB Fugitsu HandyDrive to save Windows Easy Transfer file but now neither of my two computers will recognise the HandyDrive - they just keep saying “new hardware found - looking for drivers” but don’t find any.
This is devastating as it is (or was!) almost ¾ full of months of hard work - some backed up some not (my fault of course).
I have been using the HandyDrive to work between my 18” and 10” laptops both of which had Vista.
I have the Acer Windows 7 Upgrade Kit for the 18” laptop and after 4 failed upgrade attempts and one failed clean installation, I tried one last clean installation which at last was successful. Each time I ran the Upgrade Advisor and carried out the recommendations. The Handydrive was shown as “USB Mass Storage Device” and shown as being Compatible with Windows 7.
I saved the Windows Easy Transfer file on the Handydrive.
After the successful installation of Windows 7, I carried out the Easy Transfer but was dismayed to find I had very few programs now (I had thought they would be on the Upgrade disc but cant find them). I took the Handydrive out of 18” (now with Windows 7) and plugged it into 10” (Vista) so that I could print the Upgrade Advisor file I had saved, which showed the programs I had before clean install. Disaster - it wouldn’t work! The HandDrive was not in my Ciomputer.
I have written to Fugitsu to see if they can help but in the meantime can anyone on this forum tell me what I’ve done? I will be devastated if I cant recover the data on the HandyDrive
Can anybody point me in the right direction as to where I can find a Maxtor Drive Diagnostic tool as I seem to be getting a lot of errors on my drive, Have tried Google but got lost in the thousands of links.
My problem in a unique one. I installed Windows 7 on my computer back a few months ago, using the given product key. Since that time, though, I have had to install a new hard drive on my computer. I wasn't able to retain any of the data from my old harddrive -- it was a fresh start. I've installed Windows 7 on this new harddrive with the same disk, but now the product key won't work, because I already used it when I installed it last.
I'd rather not have to buy a new copy of Windows 7, considering I'm not installing it on multiple computers. I'm installing it on one computer. I just didn't uninstall it when I replaced my harddrive. Any suggestions? Do you think Microsoft would be able to revalidate my product key?
Im running windows 7 and I would like to reallocate my HD space from my E drive to my C drive. C drive is the main drive of course, after installing Windows 7 I only have 25 GB free and I would like to allocate some of the 250 GB from my E drive. Is this possible without a full wipe on my memory to reinstall windows 7
i have Acer computer,was working fine ,yesterday frozen while iam at net, and i turnoff by pressing holding the power buttom, after that comes message: reboot and select proper device i couldnt open the recovery by pressing f10 and the hard drive and the dvd missing from bios not detected.
my asus pc just started to shut down by its self for a week now.i thought it was a virus but no matter when i tried to the recovery programs...it would still shut down.i just we and bought the exact same hard drive.i wanted to copy my doc music movies before formatting a old drive.. it still shuts down when im doing the copying.well i tired something new and completly disconnected the old drive and boot off the new one.. stills shuts down by it self.
have a toshiba laptop it shows to have 300gb of harddrive space...i cannot see where about 240 gb are going to.i opened the hard drive at my computer and is says 46.5 gb space od 285...i go to properties and the folders do not add up i am at a lost of over 220 gb
I used a 2Tetrabyte HardDrive for 2 months as storage but sold it to my friend so he can use it as primary drive.I formatted it NTFS ( i think thats the spelling for it)I went over to his house to setup his Windows 7 on it and it wont install. Im booting from the windows 7 CD and tried all the options that it offers, spent hours.
about 20 minutes ago or so I did a fresh install of Windows 7 to clear up and start fresh now for some reason it isn't showing my whole harddrive capacity. I have a 250gig harddrive and right now it's only showing 112g it's a Inspiron 518 from dell if that helps. I just wanna fix it and have my full harddrive.
I successfully backed up my computer to an external harddrive using Windows 7 backup. I used Windows recommended settings.
My computer's local disk is currently 216 GB. When I backed up my computer to the harddrive it says that the backup is 384 GB. Can somebody explain to me why my backup is larger than my system's harddrive?
Also, just so you know, I don't have any previous backups that need to be deleted. And just to be sure I ran the backup numerous times always getting the same size as a result (384 GB).
I would like to have a complete backup but don't want to use up so much space. Is there an easy way to change a setting so that I can save disk space on my external drive while have a thorough and comprehensive backup.
After having no success doing it manually, I have decided to purchase this program Paragon Migrate to help me move everything onto my shiny new SSD...Now my problem is that my Windows 7 Laptop will not recognise the SSD (I have it plugged into an external enclosure). Very strange as I can access it perfectly fine from my old Win XP machine upstairs..Question being - Is there a reason that windows 7 won't recognise this drive? and what can I do to solve the problem? It's a pain in the ass because I thought that buying that software would be the end to my ongoing upgrade issues
okay first i dont know what correct category to post this thread..so anyway i have experienced installing Windows 7 using my USB/Flashdrive but my question is does it works with External USB HardDrive? i dont have external HDD yet i`m planning to buy one likeFreecom MD XXS 320GB Imation Venus 500GBHitachi 500GB