Application (Developed In VFP) Getting Stuck - Not Responding
Oct 12, 2012
What happens is, suddenly application gets hanged with the window below:
<Application name>.exe is not responding
<Close the program>
<Wait for the program to respond>
"Wait for the program to respond" has never worked and only choice is to click on the "Close the program"
PC always had enough RAM & Processing wherever the issue appeared during the past.
Server OS is Windows 2008 (SMB2) (where the application is installed) and the client PC is Windows 7 professional sp1. Following the windows error report received from the client.
Code:
Log Name: Application
Source: Windows Error Reporting
Date: 3/10/2012 10:14:34 AM
Event ID: 1001
Task Category: None
Level: Information
Keywords: Classic
User: N/A
Computer: WS-FGE01341.abesque.com.au
[Code] .......
Recently whenever I restarted my laptop windows stops working. I get the message "The application is not responding. The program may respond again if you wait". I end the proccess and sometimes it reloads (and if it does it just goes throught the same thing again) or just seems to freeze up. I can run the system in safe mode just fine. I have done virus and malware scans to make sure it was not something from that. I also did a system restore to a previous time when it was working fine to no sucess.have done a sfc scan - it found errors but still have the same issue when I try and boot not in safe mode.running AVG scan in safe mode, getting a number of errors on the cmd prompt screen:[CODE]
Apps were not responding and computer is hanging up... Now computer will now complete startup process (even in safe modes). Windows and norton antivirus suspect Oem-drv86.exe is a threat, but, neither offer a fix.
I have a Toshiba Satellite C650-17Z laptop running Windows 7 Ultimate 64-bit. I came across a problem today with the computer taking 2-3 minutes on the "Starting Windows" boot screen alone, but since it has finally gotten past that process applications are taking absolutely ages to load up, and stop responding when they finally do load up.
I attempted a Startup Repair and Memory Diagnostic - the Memory Diagnostic came out fine, but the Startup Repair explained that this could be a problem with a recently installed driver.
I recently uninstalled some MSXML and SQL Server bits and bobs which I thought were unnecessary
none of the programs will open except for internet explorer. All other applications give the sxstrace.exe error and won't open. I advised her to hit F8 and get into safe mode so I could try and help her further. She couldn't get that to work so I had her force safe mode through msconfig. That worked and got her into safe mode and she's still getting the sxs error and can't get anything to work for her. I advised her to go back into mconfig and uncheck the safe mode boot and wait til I come home and fix it. Now the problem is when she tries opening the msconfig, she gets an error on that saying it can't open the application with the error code 0xc000142 Now she's stuck in safe mode with no networking and the computer is basically useless. I need help getting her going if anyone has any suggestions. I'm 800 miles from home and won't be there until thanksgiving and i'm trying to help her over the phone so im kind of limited here. I was trying to get remote assist going for her but she couldn't install that either without the sxstrace.exe error.they're running windows 7, If i remember correctly it's the x64 version.
Our office has an old program that we still need to use when upgrading our PC's to Windows 7. The program will run fine if you start a windows virtual PC and install and run it. However, based on the needs of our office, I need to be able to run Windows XP mode and simply have an icon for our users to click to take them to the application.If I install the program in windows XP mode, and then add a shortcut to the file under all users/start menu, a shortcut is placed in the appropriate place on the windows 7 machine and I can copy that shortcut ot the desktop. The program runs fine until you restart the computer. Once you restart the computer and double click the link on the windows 7 desktop to the program running in windows XP mode, it says:
Cannot start virtual application. The application is blocked from running as a virtual application.
I read some other posts saying to put a new shortcut in the all users/start menu folder. This works, but only until our users restart their computer. The next time the computer is up, the problem happens again. This is not an acceptable solution to have to create a new shortcut for each workstation each time the computer is restarted.
The error states:explorer.exe - application error The application was unable to start correctly (0xc0000022). Click OK to close the application.When I click OK, i just have a black screen. I can get the task manager going by hitting control, alt, delete. I've tried to start explorer.exe from the file menu, but get the same error.
The application failed to initialize properly (0xc0000142) Click on OK to terminate the application.The only option is to click ok. I am deathly afraid to turn off my computer because my brother recently did and that caused it to freeze at the blue HP startup screen, but thats another thread. I get this error whenever I launch anything. I can't even open up the task manager. I really need help. I don't currently have a way to back up my stuff either but I am working on it. By the way, I don't know that my brother was having the same error message as i was or if he was having any error messages. I use zone alarm full security suite if that helps at all, I don't know if it deleted a registry file or something.
I tried to replace 3 files in the system 32 folder, and must have made a mistake along the way leaving my laptop inaccessible once logged on. The three files were:
uxtheme.dll themeui.dll themeservice.dll
I received these error messaged when logged on:dwm.exe - Application error the application was unable to start correctly (0xc000007b). Click ok to close the application.explorer.exe - Application error the application was unable to start correctly (0xc000007b). Click ok to close the application.Can system restore revert back the files so it was like i never attempted the patch?
I don't what happened but all of a sudden a message box opens up on my windows 7 laptop and it says this " the application was unable to start correctly (0xc0000142). Click OK to close the application" . I clicked ok but the error message box keeps returning back.If i remember properly, this happened when I tried installing some wallpaper.system seems to be working finw with all applications, but this message box is quite annoying.
i installed a new nvedia pci and run but windows 7 get stuck and give error in blue screen and fast reboot the pc .. i tried to re install windows and get the same stuck on the first screen where to choose languages and press next screen then i tired to do a recovery but also got freez on the first screen.. ! but when i put another hard drive where xp installed it starts as it should be ! also i did a new installation of windows 7 on the hard disk and starts perfect on other computer but when put back the pc where the new graphic card it freeze!
And now I am so screwed. I can't even open services.msc, I can't install an update, I can't run updates and I can't re enable anything because I can't get into services to do it. Please don't say system restore because I disabled it.
I was just wondering if it is possible to reverse engineer a 32-bit application and recompile it as a 64-bit application. If so, would it still function?I don't know if talking about reverse engineering is acceptable in this forum or not. If not, my apologies.Also, I don't exactly know how "legal" it is or if it's against any EULAs.I'm a heavy browser user. I use Firefox Nightly and constantly have several tabs open. I also run several different applications at once and occasionally Skype. I'm CONSTANTLY hitting the 32-bit barrier for RAM (can't remember if it's 3.1, 3.2 or 3.3 GB) and I still have more RAM on my system. I'm thinking the video quality on Skype starts going south when I run low/out on addressable memory since it's a 32-bit application
I'm using Windows 7 Ultimate. I've been using it for some time without problems, but this morning I was unable to get on the Internet. Yesterday I'd installed an update for ZoneAlarm which I thought was probably the problem, so I uninstalled in and downloaded and installed PC Tools Firewall Plus instead. no my computer will connect to the Internet OK, but whenever I try to open most programs, I get the following error:"The application was unable to start correctly (0xc0000142). Click OK to close the application."The only two exceptions I've found are Microsoft Security Essentials and Internet Explorer which both work fine.
I'm trying to run a .bat file but when i start it cmd won't start and it gives the error message"The application was unable to start correctly (oxc0000142). Click OK to close the application."
I have an application that is set to always be on top of all others. Ive looked through all the options in the application and there is not one to make it not be on top of all other windows. I have also asked the maker of such software and they have said that there is no way to not make it ontop. does anyone know a way to make another application come ontop of this one or a way to get it to where I can use the other application? the application Im using is a medical application and the manufacturer is not helping at all. the application I want to use isnt harmfull and it is job specific.
I need to run a program from a server in a mixed Windows XP and Windows 7 environment. The current policy is to have the Windows 7 UAC turned to 'Never Notify' as the logon script needs to make changes to registry, etc. The program will only work with Windows 7 if the UAC is turned on. Is there a way of activating the UAC for this one program only?
I'm looking for an application that can log all changes to a PC in the files/folders and registry when any application is installed or uninstalled.If an application gets installed, I need to know exactly what changes were made to the system. The systems will be using Windows 7 x32 and x64 bit. Does anyone know of such an application?
I had a malware/spyware problem and used antisuperspyware to fix it but after deleting the detected files now I cannot open any .exe file directly when I try it gives me application not found error or which of the following programs u want to use to open the file ,I cannot even open IE or firefox ,what should I do?
I can't open any application. I don't know what happen. Whenever I open an application, It was open with Internet explore. All of my icons are appear with Internet Explore icon.
So I have windows 7 RC1 installed. Generally I never do task/application switching using windows but I recently installed a wacom pen tablet and one of the shortcut keys on the tablet was programmed to switch to various applications... BUT IT DID IT IN A WAY I HAVE NOT FOUND IN Windows 7 YET!
Usually Alt+Tab gives you the generic windows task switcher that shows all the icons of the various apps you have open.
But the pen tablet used an app switcher that did this..
I tried to install a program which i made using visual basic 2008 but there was an error that said"application cannot be started. contact the application vendor" can anyone help am just a beginner
I am looking for a chat program that can: Work correctly without a working internet connection, Clients can use web browser to chat, so that clients don't install anything special.
I am attempting to have an application run on startup. I put the application in the startup folder in the start menu, but that didn't work. It shows up under startup in msconfig, and the box is checked, but when I restart the application does not run.
i have an 03 jeep grand cheroke, last week my windows would only go up and down once in a while, now dont at all, also when your turn head lights and interior lights to auto on the interior lights will not go off after you start car or turn it off checked fuses, is there one i dont see somewhere?
I had no problems with CNET but when I got this new PC every time the TechTraker says I have new updates, every time I try, it says "no registered application for this extension". This is using my normal browser Opera. When I copy and paste the address to Internet Explorer, no problem but why does it give me this problem and I would much prefer to do it on Opera.
