An Error Occurred During The Moving Data Process : -214702473
Sep 3, 2011
Today I got black hawk down and installed it getting an error message saying An error occurred during the moving data process : -214702473 After googling it came up with answers saying something like anti cheat software requires me to an a administrator on my computer. I'm an administrator so I don't know why my computers not recognizing me as one?
So when I leave my computer it goes into hibernation mode, how ever when I come back it acts like its loading and then the POST comes up after that it says: "Your computer can't come out of hibernation.
Any information that was not saved before the computer went into hibernation will be lost."It does this ever time it goes into hibernation, I disabled it and I have no problems now but I want my computer to hibernate because I leave it on all day long and it will wear components out faster and waste power.I have tried updating all the drivers and hardware drivers from the website for the HD but nothing helped.
I'm getting this every time I boot up my computer. It happened after I had my computer on "sleep". When I woke up and tried to open my laptop, it shut off and showed me this:
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disc an restart your computer. 2. Choose your language settings, and then click "Next." 3. Click "Repair your computer."
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: BootBCD Status: 0xc0000001 Info: An error occurred while attempting to read the boot configuration data.
It simply takes me to the same screen when I hold "F8". So I cannot get the "Repair your computer." Option. I do not have the windows installation disc. Also, all I can do is basically start up my computer and it takes me to that screen every time.
im getting that message upon startup. Im running windows 7.It requests for the windows recovery CD to be inserted, so when I put the CD in to boot I get a "windows is loading files" then a starting windows with the windows logo then just a black screen with a cursor, I left it like this several times for at least an hour an nothing happened.I can't press F8 to access safe mode etc, nothing will happen.Pressing F12 to boot from CD just does the same thing as putting the CD in normally.
I'm getting this every time I boot up my computer.It happened after I had my computer on "sleep". When I woke up and tried to open my laptop, it shut off and showed me this:Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disc an restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: BootBCD Status: 0xc000000 1Info: An error occurred while attempting to read the boot configuration data.
I have built my own computer and I have a ASUS P9X79 Pro motherboard, an Asus GT440 graphics card and a Corsair 120gb SSD. I'm trying to get win 7 to install on this brand new SSD. No other drives connected. The BIOS which has been flashed and is up to date finds both the DVD drive and the SSD. I've set boot priority to the DVD drive and I keep getting this MSG below. My SSD is brand new and this would be new install........ Windows failed to start. A recent hardware or software change might be the cause. o
File:EFIMicrosoftBootBCD STATUS: 0xc0000178 Info: An error occurred while attempting to read the boot configuration data.
I'm getting this error after a forced shut down. I'm told to insert installation disk and repair but I don't get this option, I'm just returned to the same error message. I have tried restarting and loading windows from the installation disc. I'm told that windows is loading and the windows logo appears but after a while it goes to a black screen with only the mouse cursor showing.
File: ootBCD
Status: 0xc0000001
Info: an errr occurred while attempting to read the boot configuration data
I'm trying to get a Toshiba satellite L300D to start Win-7. It gives an error message:
"An error occurred while attempting to read the boot configuration data"
Not really sure what that means, but my guess is thats a file that it isn't finding. My pic isn't very clear, the Status is 0xc000000f, again not sure what that means. This machine has been running and well behaved for a long time.
So I've been using my 64GB ssd as my windows 7 boot drive and i have a 1TB hdd as my data drive. Recently the my computer has begun to freeze up with errors like "explorer.exe" has stopped responding or "windows" has stopped responding and half of the time when i try to boot it says it cant find windows. This has lead me to believe that my ssd is dying despite being only a year old. I need to RMA my ssd but to do that i would be losing my boot drive for weeks. So I thought id try to create a system image so that i can simply put my boot drive on my hdd, but when i try to create the image it says that the image would be 711GB because its including all of my hdd (which contains all my user libraries and downloads). My question is: how do I make windows stop thinking that my hdd is a system drive so that I can create a reasonably sized image, or more generally: how can i easily move my boot drive to my hdd? Also, I've read some posts about using "easyBCD" to accomplish the latter but I'm not sure that's exactly what i need in this situation.
I was moving a file, aprox 3gb, to my other hard drive, the power went out for like 30 minutes, then what It was back on I see two parts of that file, 1 in the original place, and 1 in the other. How do I get the rest of it to go on the hard drive, or resume the transfer?
I am planning on getting a 256 GB Samsung 840 pro SSD, but I have some questions first. I plan on using it for my OS and my programs and games. How would I move that to the SSD? Is there anything else that would see a speed increase if moved to the drive? What would my libraries (videos, pictures, music) be like if my media was stored on my HDD? Is there anything else I should know before I buy one
I have bought a new Windows 7 pc and put my old XP pc out to grass, I have removed the old Xp Hdd and mounted it into a usb Caddy. What I want to do is either use this as a duel boot Windows 7/xp or transfer all my xp data over onto my new pc.
New dell n7110/win7sp1x64.At startup on new machine from dell, process explorer (procexp64.exe) lists 81 processes running (seems like way too many - compared to xp with maybe 25 at startup). But which processes I can turn off is a question for another day. OK, read carefully, at least 15 processes in PE show " Path: error opening process". PID, CPU, Private Bytes, and working set columns are shown for these "problem" processes, but nothing after that, ie, description, company name etc. For all other listed running processes (with known paths), all info is shown in all columns. The problem processes include some important ones, services, crss, ism, wininit, winlogon, that must to be working for the computer to work, and everything seems to be working properly, and no cpu spikes or other weird stuff is happening. Right clicking properties on these problem processes, properties window pops up as normal, but shows "version: n/a, build: n/a, path: error opening process, no command line, no current directory, autostart location: n/a, Parent: non existent process (708), user: access denied. Again, this info can not be correct since the computer is working. And then, after a few minutes, another window pops up and says PE has stopped working, and closes the program. Now, if this was the whole story, I would go to sysinternals with this, but read on... Task manager running simultaneously with PE lists 83 processes running, more processes than PE, and also ~5 different processes than PE, and PE lists some processes running that TM doesn't list. So PE and TM show different running processes at the same time. How can that be? For the processes that PE shows "error opening", e.g., crss, etc., when I click properties in TM for the same process, sometimes I get the usual/normal pop-up window listing the path, and all the other data as normal, suggesting the process is working properly. But sometimes when I click properties in TM for the processes that PE shows "error opening", I get no pop-up at all, nothing for that process. So, IMO, it's not just a PE glitch, something is actually wrong here. This is a new machine, with PE the only 3rd party installation. I have installed several dell driver updates, but this problem occurred before I installed them. Also, remember PE and TM simultaneously list some different running processes and TM also fails to show paths, etc.
when i click format a 150 gb partition space in disk management option i recieved the following message "An unexpected error has occurred. Check the System Event Log for more information on the error. Close the Disk Management console, then restart Disk Management or restart the computer". and the drive does not appear like other drives in MY Computer?
I have already reported to Sony to but i heard their take their time but thats the one thing what i dont have at the moment so i know many people here know about that stuff to. So anyway. Some time ago SP1 launched for Windows 7. I installed but it but something went it wrong and it didn't install correcly and then i was forced to use System restore. Everything worked and i haven't used SP1 because i don't want to risk screwing up my computer before some important things, i got plenty of time later for that . The problem is after the system restore every time Vegas launches i get a error : Sony Vegas pro 10 an error occurred starting Vegas Pro Error 0x80070002 (message missing).
i have a toshibio satelite model # psc16c02q00m, I've tried to reformat my computer, i have the back up Disk and when i started my computer i press F12 to get the boot bios where i made it boot from disk putting my back up cd#1 into there. it was working fine till i put in disk three, from there i got a F3-F200-002 Error said an error has occurred please press OK to turn off the computer. and that is the only option. ive tried repeating the process but now all i get to is this screen even when i try to but off the hard drive im assuming my windows has been cleaned.
I recently re-installed windows and am now trying to install the DirectX End-User Runtimes (June 2010). All goes well, it installs everything, but as it finished I get this error: I have tried redownloading, using other installers and updating my graphics drivers. Nothing will work. It's probably worth mentioning that the first time I tried installing, about a week ago, my computer totally froze in the middle of the install and I had to force restart.
I've had this laptop for a few months now and I got another hard drive called Data which is empty, my other hard drive called OS is where everything goes and I wondered if I can move games and other files to my Data hard drive without corrupting them. And if possible can I move a file called Program Files to my Data hard drive without causing any problems. My pc takes a long time to restart which I guess my OS decides. My OS got is 80gb of 238GB and my Data is 332gb big, with no files in it.
What is better when moving large amounts of files and data (20+) to either copy or cut the files? Or does it not make a difference?I was told cutting fragments your hard dive while copying does not
I've been using Windows 7 pro 64bit for a while. My issue is that I want to put in a new hard drive and install windows 7 on that without loosing or moving all my data onto my new hard drive. Can someone tell me what is the most painless way to go abouts doing this?
This is my setup: - PC1 runs Win 7 and Outlook 2010. It has my personal Inbox called Jon Local. - PC2 runs Win XP and Outlook 2003. It holds my company data and is Server.
I want to change this setup so that I only have all my Outlook data on PC1, running under Outlook 2010. So, I need to migrate the data from PC2 to PC1.
1. How do I do this?! 2. Do I need to convert the format of the data on PC1 to a new Outlook format? 3. Can I export the account settings? No idea what all the pop settings are and the passwords, so would be nice if I can export that and import into Outlook 2010. 4. I need to have the company data from PC2 separate from PC1. Will it give me two Inbox?
I recently switched out an older Netgear router for the Netgear WNDR3300. I have a 1TB WD MyBookWorld connected via ethernet to the router. Ever since the router switch I have been having two specifice issues:While uploading videos to Facebook, the video will upload anywhere from several MB up to over 100 MB, then stall, saying it's still uploading but trust me, it isn't. I can copy files/folders from the networked hard drive to my computer flawlessly, but when I try to copy files/folders from my computer to the networked hard drive, it copies anywhere from a few seconds to maybe a couple minutes then stalls out, giving the error message: "Network Error. There was a problem accessing [\SERVERFOLDER]... Make sure you are connected to the network and try again." with Retry, Skip and Cancel. When cancel is pressed it gives: "An unexpected error is keeping you from copying the file. If you continue to receive this error, you can use the error code to search for help with this problem. Error 0x8007003B: An unexpected network error occurred.
Other useful information: on the new router, the WNDR3300, if I use WEP security, I can copy files/folders to the hard drive, no problem. However if I try to use WPA/WPA2, the abovementioned problems occur. I would use WEP and just forget the hassle, but WPA2 is much faster and more secure, so I really want to get this fixed.I also believe the two problems are somehow related, considering they both involve working for a few seconds to a few minutes, then stalling and failing. Could this be somekind of authentication or something to do with WPA/WPA2 that I'm doing wrong?
I have tried to install Windows 7 SP1 64 bit and it gave an error message of: windows update encountered an unknown error code 80246007. I also get the error message after my laptop restarts if the installation shows it supposedly installed: installation not successful an uknown error has occured Error 0x8008095. I have also tried the 3 steps to try before installing Windows 7 SP1 and I still get the above errors.I would like to know the following:
1. When we update Windows where does it store the updates. Because I noticed that each time I update I loose disk space and I am wondering if I could delete these updates once I know they work.
2. I noticed a folder in the color of purple. It is: c:userusernameApp Datalocalmigwiz in this folder it contains the following files: debug.txt, diagerrr.xml, diagwrn.xml, miglog.xml, setupact.txt, setuper.txt what is the folder for.
3.I use windows disk cleanup and ccleaner. I noticed that when you install or uninstall programs it creates a restore point and shadow copies. I clean them out once a month. Is there anywhere else that shadow copies are created and can be deleted. How about does Windows 7 has a cache where we need to delete files. How many temp folders does windows 7 create. I would like to retain some disk space back. Do you know if Office 2010 where it stores it updates and can we delete them once we know they work.
I was wondering... If I move my video, music, my documents folders etc. from my boot drive (ie C drive) to say a storage drive (D Drive), is the data completely removed from the boot drive or is it still there waiting to be erased next time a new file is written to it?
I'm trying to install windows 7 onto my HP 6710b laptop. But keep getting same error come up. (this also happens with 2 older hp laptops I have!) From start of boot with disc I get the following... Windows has encountered a problem communicating with a device connected to your computer. This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removable storage is properly connected and then restart your computer. If you continue to receive this error message, contact the hardware manufacturer.
Status: 0xc00000e9 Info: An unexpected I/O error has occurred.
Every time i boot my computer i receive this message, after several restarts my system will load up the windows, n i can use my PC,,, n if i turn on the Pc after some hours same error message again.. have restart my system several times to get it work... What's the problem here... i think it's not hardware problem if it was it wouldn't have booted up my OS after several restarts... Is this something gotta do with registry, after messing with registry i have started to get this message, Is re-installing my Operating System only the solutions.
I downloaded an ATI Graphics driver from the sony website then when I launched the installer, it says: "checking system information.." then after that something will pop up saying "an I/o error occurred while installing a file. This is normally caused by a bad installation media or a corrupt installation file." What's wrong with this? I used internet download manager to download the file, although while I was downloading it, there was a blackout but when the electricity came back I quickly resumed downloading it.
So, about 2 weeks or so ago my PC was working perfect, no issues whatsoever. Then about 2 - 3 days after I went on my PC and things just froze up, I couldn't shut down properly because it was just stuck froze. So I shut down using the button, but when I turned it back on I got "Disk Read Error Occurred". So I left my PC off for a while and it worked again after a few restarts, but it seems to keep coming back, my PC also sometimes freezes up.
I tried to make a small 7gb partition on a separate drive and it worked fine. I had already had this drive which is a 1tb drive partitioned as follows: 500bg and 500gb. So I booted using my xp disk and it part. and when it restarted I got the following: "a disk read error occurred. Press Ctrl+Alt+Del to restart".
Now I can't install xp because it won't find the 7gb partition on restart and I no longer can boot into Windows 7. I tried running Windows 7 startup repair but it says:
"startup repair cannot repair this computer automatically."
The first line of the problem signature is StartupRepairOffline.