Adapter Converter From VGA-to-Analogue To Being Able To Connect Notebook To The TV?
Dec 12, 2011
I'm looking for a Adapter Converter from VGA-to-Analogue to being able to connect my Notebook to the (any) TV (the older ones).
TVs usually have one or more of the following input connectors:
S-Video
Video (cinch)
Scart
I' found some Adapter: PC TV Konverter - NEU! - ganz einfach Pc: Amazon.de: Elektronik KanaaN PC VGA zu TV Composite Video RGB Konverter: Amazon.de: Computer & Zubeh�r Geniatech PC VGA zu TV Composite Video RGB Konverter: Amazon.de: Elektronik
These devices are all looking very similar.But the buttons are different. Is there really a different?And what could be a problem of these Converters?
I didn't find Information about how the signal is converted, What if I have a high resolution? And use the VGA out from the Adapter,Can the analogue signal send to the TV be scaled correct?Or is there any other good converter Adapter?
PS:
There is another Question in my head.
Is it posible to have a external USB Audio-Card with different Audio channels.So that I can assign Application A to one output channel and Application B to another?
eg.: The Media player to the Channel which is feeding the HiFi- equipment,while the VoIP Application is assigned to a second channel feeding the Head Set.But if needed signing all channels to the media Player (to get 4.1 Sound)
View 3 Replies
ADVERTISEMENT
Sep 30, 2011
We are using CISCO CATALYST 24 PORT 2960G series switch & no more port available in this switch. We need more ports for few pc connections. I want to connect D-LINK FIBER MEDIA CONVERTER & 6/8 PORT SWITCH to extend more port but Our IT department person saying that D-LINK SWITCH can create problem in network so we should purchase one more CISCO 2960 24port switch which is very costly. Kindly inform us is it right that D-LINK switch can create problem? After your reply we will be able to make order for D-LINK or CISCO.Kindly check our IT department person comments,We are not agree to place the 8 port switch of D-Link, due to the security of the network and to prevent the disturbance of the smooth running network.
View 3 Replies
View Related
Mar 17, 2011
I have plugged in my network cables, there is still a red cross on my network connection. I have tried the following:
1) change the cable
2) reinstall the network driver
LAN and wireless cannot work.Then, I go into Administrative Tools-> Services.I found that the Service "Network Location Awareness" is missing, I think this causes the problem.I want to ask, how can I add back this service to Services?
View 4 Replies
View Related
Mar 21, 2011
How to connect my existing email to my notebook?
View 1 Replies
View Related
Jul 18, 2012
I am connect to my wifi my notebook is not allowing internet access . but my laptop is working perfectly?
View 5 Replies
View Related
Jul 31, 2011
I have a laptop (HP Compaq cq62) with Windows 7 64 bit and I have a strange problem with my wireless adapter. When I close the lid the laptop goes into sleep mode. When I open the lid and log in on my laptop, the wireless adapter can not find any routers. I have to go to my network settings window, disable my wireless adapter, enable the wireless adapter and then it is working.
View 5 Replies
View Related
Jun 21, 2011
I have 2 ISPs and 1 computer(Windows7). During the day I switch between the two ISPs periodically by plugging and unplugging the cat5e cables (I never use the two ISPs at the same time). I want to simplify this process and save the RJ45 jack on my laptop from wearing out by the repeated plugging and unplugging of the cat5e cables. Could I purchase the MYWA-07 splitter and use it as an extension of the laptop jack and would it be okay to plug both ISPs in at the same time? Also, if this will work, will I be able to choose between the two ISPs by clicking on the internet access icon in the lower right hand corner of my desktop? Is there a chance that I could damage something by trying this?
View 2 Replies
View Related
Dec 28, 2011
I have seached everywhere trying to find instructions on how to connect to two WLANs with one wireless network adapter but I haven't been able to find anything.Apparently this is possible using the Virtual WiFi Miniport Adapter - but how?The reason is that I have two WLANs - one is a router which connects network attached storage, the other is a router connecting the internet.Internet WLAN Gateway = 192.168.1.1NAS WLAN Gateway = 192.168.0.254An explanation of how I could maintain my connection to the internet WLAN while still being able to access data on the NAS through the NAS WLAN would be excellent.
View 5 Replies
View Related
Mar 27, 2012
i recently bought a asus pce-n10 wlan adapter in order to make an AP for my smartphone/laptop to connect to (both have been ordered so i cant test it yet), my desktop is connected directly to the modem.Without the asus utility software (which has outdated card drivers) i cant seem to get this card to connect, i made a screenshot with as much info on it as possible (if i forgot something i will make a new screen of it).
View 1 Replies
View Related
Dec 13, 2009
When I tried to connect it wirelessly to the internet (using the wireless USB adapter --> Zonet ZEW2546), it cannot detect any single network available, even though the router is just one floor below the PCBut, when I tried to plug the USB adapter to the other PC, which runs on Win XP, on the same floor as mine, the adapter works perfectly, and I could surf the web from the Win XPWhat do you think the problem is? Hardware or driver?Btw, I have specifically looked for the newest driver for the USB adapter (which also supports win 7 64-bit) and installed it to the new system, but still to of no avail.
View 6 Replies
View Related
Jan 16, 2012
I've been away from the PC world for the past few years because I've been running a Mac.I decided to get back into some gaming on picked up a Dell XPS desktop running windows 7 ultimate x64.I bought a Asus USB N10 Wifi Adapter and it won't connect to the internet. It gets a limited activity logo over top of the connection. Today I tried plugging it rite into the router with a LAN cable and still, no dice. Came up with an IP address error.I'm guessing this is a router issue? When i run ipconfig in cmd prompt, it doesn't even have a default gateway?
View 7 Replies
View Related
Jan 8, 2012
i have an x-fi titanium soundcard with logitech 5.1 speakers that use 3x 3.5mm jacks ive ordered a set of roccat kaves which also use 3x3.5mm jacks.what i would like to know is. is there some kind of cable or a switch box that i can plug all jacks in but select which device i want to use? so i dont have to keep swapping them at the back of my pc. or is the best thing to just use some 3.5mm jack extensions and mount them closer to me. then just swap the cables as and when?
View 4 Replies
View Related
Feb 10, 2012
My virgin Super Hub wireless option is on - yes I am typing in the correct security key - yes
I disabled the security key making an open connection - yes
It detects my wireless modem , but doesn't connect, - yes
This is simply a windows 7 64 bit problem
The TP-LINK TL-WN722N Wireless Adapter has glowing reviews and works on my XP machine.
There is something in windows 7 stopping this device from working.
I even used a different wireless usb stick and that worked .
View 1 Replies
View Related
Oct 8, 2011
Windows 7 won't connect to the internet? The ethernet cable is plugged in and it works, but when I am on Windows 7 it cannot detect that I am connected to the internet. I have tried unplugging and replugging and restarting but it still doesn't work. When I troubleshoot, it says: Install a driver for your network adapter.
View 1 Replies
View Related
May 10, 2012
I have RTL81918192SE Network adapter I made upgrade when i want to connect to wifi happen blue screen and restart bccode 076. Minidump i put here. Maybe i need just disable some drive?
View 8 Replies
View Related
May 4, 2012
I just did a new build, Intel i5 2500K, ASRock mobo, 16 g ram, my old PNY Quadro NVS 440 video card for my 4 monitors, Crucial M4 64 g SSD, turned it on, works from git go, but I can't connect to the internet. Finally talked with MS support somewhere and they finally said that my network adapter was missing and said I had to buy a drivers and utility disk for my computer. I'm on ATT Uverse and 2 other computers in the house can connect just fine. It's not Uverse or the connection, it's something wrong with my W7 OS or my stupidity. Did I install the software OS incorrectly? Why is there something missing from my OS or computer?How can Windows 7 HP 64 bit not come with a network adapter or driver?
View 2 Replies
View Related
Oct 13, 2012
I had to re-install win7, now i have no network adapters. what should i do?
View 1 Replies
View Related
Sep 19, 2011
Does anyone know of a free converter program that will convert m4v to wmv (or other web friendly format).
I have installed several that said they were free but turned out to trial versions.
View 3 Replies
View Related
Jun 23, 2011
I have a lot of FLV's and I want to convert it to MP3's and MP4. Does anyone know a free solution? Could be online website as well as long as there is no quality loss.
View 9 Replies
View Related
Dec 1, 2012
i am having a problem with a pc to tv converter. whenever i connect the laptop to tv through converter both screens flash in and out going black and then good again for a few then blank again and so fort without stopping.
View 2 Replies
View Related
Jan 4, 2013
What's the best free mp4 to wmv or avi converter for downloaded files I want to burn with windows 7 dvd maker (64bit system)?
View 2 Replies
View Related
Sep 13, 2011
I want to add another HD to my PC but all my sata ports are used up, the only other option would be to buy an IDE to SATA converter.
If I buy a converter will the HD behave as if it were using SATA, will the transfer speeds remain the same? Or will it degrade?
Someone told me it would be possible to add 2 devices using the PATA/IDE ports, but so far I've only seen converters that only have an option for 1 IDE device. How many devices can the PATA port support?
View 9 Replies
View Related
Oct 13, 2009
i am wanting to convet avi to vob format and cant find a good converter what do you guys use?
View 4 Replies
View Related
May 10, 2012
I looked on Google only to find a massive amount of links to online converters but I would like a program to do it locally.
View 7 Replies
View Related
Oct 27, 2012
I have Windows 7 home premium on my computer, and I used the windows backup software to create an xml image and recovery cd. I would like to create a virtual machine, load Windows 7 into it, then get the w8 upgrade (I get os upgrades cheaply as a teacher) and try the upgrade in the vpc before I decide to upgrade my computer. I have heard lots of bad reviews about w8, so I will probably skip it as my main os, but I would like to check it out in a vpc. However, I have only installed xp that I downloaded from ms in a vpc, so I have a big learning curve here.So I have two questions:
1) Can I successfully install an iso image of my current os into a vpc that I create on this comuter? Would the drivers be the same in the vpc?
2) What is the best free software to use to convert an xml image to iso to do this?
View 2 Replies
View Related
Apr 18, 2012
how can i run my auto cad on 64 bit windows 7. what to do. my id is Please do not post your @mail (that way u are helping to spread the spam), u will be automatically notified in your email when someone post a fresh line in your thread.
View 4 Replies
View Related
Apr 28, 2010
I have a USB<->serial converter (several, actually) that I cannot get to work under Windows 7. I know the hardware works.
When I try to open the virtual serial port in a terminal program, I get an error message stating that it cannot open the port. When I try to use the old-fashioned command line method ("copy test.txt com7" from the "DOS prompt"), I get an "Access denied" error message.
More details: My computer is a dual-boot Windows 7 Ultimate 64-bit / Windows XP Pro 32-bit system. The USB serial converter worked immediately under WinXP when I rebooted, and it even works in the WinXP virtual machine under Windows 7. I have the latest certified drivers (from FTDI), which are stated to function under Windows 7 64-bit.
The serial converter appears as it should in the Device manager. My computer has one physical COM port, and I can access that one without any problems.
The serial converter is a USB-RS485-WE-1800-BT from FTDI. I have tried a USB<->RS232 converter (don't have the model number here), but it behaved exactly like the other one. I also started the terminal program as an adminstrator (since I suspected access rights issues), but it did not help.
I have tried uninstalling the drivers, then installing the latest certified driver and the even later non-certified driver, but still had the same behaviour.
View 3 Replies
View Related
Feb 17, 2012
Where can I find a converter that is good, I'm afraid I never used one before So im making sure, does anyone have an experience with them, I read some review people saying make sure you device is compatible with the voltages? If I need to check if they are compatible why am i buying a adapter/converter?
View 7 Replies
View Related
Nov 2, 2012
well im trying to convert some videos from MP4 to AVI.so far im having not much luck, i have tried a few programs like wondershare and prism video file converter.im either loosing alot of picture quality or its taking all day and still loosing quality.
View 6 Replies
View Related
Dec 22, 2012
is there a simple program that converts batch file to .exe file? I found this: Bat To Exe Converter - CNET Download.com But some users say its virus/malware. Can someone confirm that or give a diffrent link?
View 2 Replies
View Related
Jul 11, 2011
where can I get a USB to LAN converter driver for Windows 7
View 1 Replies
View Related
