We are using CISCO CATALYST 24 PORT 2960G series switch & no more port available in this switch. We need more ports for few pc connections. I want to connect D-LINK FIBER MEDIA CONVERTER & 6/8 PORT SWITCH to extend more port but Our IT department person saying that D-LINK SWITCH can create problem in network so we should purchase one more CISCO 2960 24port switch which is very costly. Kindly inform us is it right that D-LINK switch can create problem? After your reply we will be able to make order for D-LINK or CISCO.Kindly check our IT department person comments,We are not agree to place the 8 port switch of D-Link, due to the security of the network and to prevent the disturbance of the smooth running network.
I'm looking for a Adapter Converter from VGA-to-Analogue to being able to connect my Notebook to the (any) TV (the older ones).
TVs usually have one or more of the following input connectors: S-Video Video (cinch) Scart
I' found some Adapter: PC TV Konverter - NEU! - ganz einfach Pc: Amazon.de: Elektronik KanaaN PC VGA zu TV Composite Video RGB Konverter: Amazon.de: Computer & Zubeh�r Geniatech PC VGA zu TV Composite Video RGB Konverter: Amazon.de: Elektronik
These devices are all looking very similar.But the buttons are different. Is there really a different?And what could be a problem of these Converters?
I didn't find Information about how the signal is converted, What if I have a high resolution? And use the VGA out from the Adapter,Can the analogue signal send to the TV be scaled correct?Or is there any other good converter Adapter?
PS: There is another Question in my head.
Is it posible to have a external USB Audio-Card with different Audio channels.So that I can assign Application A to one output channel and Application B to another?
eg.: The Media player to the Channel which is feeding the HiFi- equipment,while the VoIP Application is assigned to a second channel feeding the Head Set.But if needed signing all channels to the media Player (to get 4.1 Sound)
My computer was working fine yesterday, it showed about 6 Networks and I was able to connect to my own network, D-Link fine. Now after playing a game via game booster I tried to acces Google Chrome and it says "this webpage is not available" I cant acces Skype or steam or anything that requires internet. I thought I had simply disconnected my self but when I went to check, it shows no networks. I thought this was my connection but then tried other devices "I-Mac, I-Pad, Windows XP Desktop and a DSI" and they all seem to find many networks and connect to D-Link fine.
I have a Lenovo, Windows 7 Home premium 32bit. McAfee controlling my firewall. Unable to connect to internet. Connects to my wireless network. Timewarner has given up since my other HP xp computer works. Router has problems but works OK with my HP and vonage devices.
The router is D-Link WBR-1510. finding if this router is compatible to Win 7?
How do I "blow out the NIC"? How do I identify devices from drivers to uninstall?
I just got a new laptop with an Intel WiFi Link 1000 BGN network card.
When I plug the Ethernet cable in the laptop it works fine but when I try to connect to the router wireless, it says it cannot connect.
I have tried unplugging the router and the signal is strong. I have set "network discovery" in the settings.
I have never used wireless before. I assume it's something simple. What other steps do I need to take?
I have noticed the signal from the router is VERY strong, then a minute later, it's not even listed. Do I need to set up a wireless network on the router? or do they automatically send out the signal?
I also set up WPA (personal) on the router. It asks for the password and says "Windows could not connect"
I'm trying to achieve something which I think most might not have tried,starting with what I have
1.Type 2 adsl2+ cpe/iad modem-It has built in wifi. 2.A fiber internet connection. 3.A samsung smart tv with built in lan adapter (40 inch LED-no wifi but wifi ready)
Now the modem which I have mentioned above cannot be used with the fiber internet connection.So,it is just lying waste but I want to use my internet connection provided by my ISP through fiber connection with the modem so that I can use my modem's wifi and lan ports.What I have done was connected my laptop to my modem's wifi and also to my ISP's fiber connection so my laptop is connected to both the networks and now I have tried to establish a bridge connection between the lan connection and the wifi connection I was successful and I was also able to share my internet connection(as shown in my laptop) but when I have checked for the wifi internet connection it is not there(Checked on my mobile-one x and ipad).So is there any way so that I can do this...??Please don't suggest me to use a application like connectify or virtual router to share my fiber internet connection.Now there is a another thing that i have mentioned above my Samsung tv now I have connected one of my modem's lan connection to my tv and tried to use the all share application(my laptop is connected to the same modem through wifi) in my laptop I have found my tv and the laptop connected to the modem(Control PanelNetwork and InternetNetwork Map)but my tv is not at all recognizing my laptop and my laptop is also not finding my tv(in the allshare application).If my first problem of getting my internet to the modem's wifi is possible then I also want to try that for the modem's lan connection so that I can avoid the pain of buying a samsung wifi dongle which costs more than 10% of my tv's price.
i have officially 100mb/sec speed, however sometimes i am unable to load pages, and download Internet clips etc. the information gets stopped in someway. other times things run fast and smoothly.a speed check was done - its normally over 100mb/sec. but when things are going wrong the test is unable to complete and the test seems to pause for some seconds then speed-up to perhaps 300mb/sec before getting stuck again when it goes to test upload speed.the computer uses no modem, or router - cable runs straight from the computer to the wall contact as instructed.
microsoft windows [version 6.1.7601] copyright (c) 2009 microsoft corporation. all rights reserved. e:userschris>ipconfig/all windows ip configuration host name . . . . . . . . . . . . : chris-pc
I have been tearing my hair out for 2 days now trying to figure this out. All I want to do is connect my xbox 360 in my living room to my xbox through Media Center and watch some movies on my computer on my living room TV. But it simply is not working. I get the error "Cannot Set up Extender" every single time i input the code into my computer that my xbox gave me. But, my dad's computer (windows 7 ultimate x86, connected to the network with ethernet JUST LIKE ME) works perfectly fine and connects instantly. And so does my netbook with the same OS but on wifi, I have been doing everything that google has been telling me through my search results. I have so far narrowed it down to a problem with my computer.
I'm new to windows 7 and i want some help. I have one apacher 460 media player which i would like to connect on my homegroup so that i can stream movies from my pc.
i am trying to connect my xbox 360 as an extender. i get all the way through the setup and it fails at the last step. i have gone into my firewall and the media extender is ticked to allow. i have also manually set up rules to allow all the ports i found on the microsoft site to be allowed. lastly, i tried the microsoft fix it tool on the microsoft support site. i have run out of ideas. the xbox is definitely on the same network as me, it can see my laptop and also my iomega iconnect when i go into setting and network connections. it tests positively when i test the network connection, but fails when i test the media centre connection.
i have gone through the setup 3 times now (i.e. reset the connection and put in another 8 digit code to set up) but still no luck.
What is the difference between dual link DVI and single link DVI cables? Would I see a noticeable difference if I switch to dual link cables? Would I benefit any at all from switching from single link to dual link?
I have a lot of FLV's and I want to convert it to MP3's and MP4. Does anyone know a free solution? Could be online website as well as long as there is no quality loss.
i am having a problem with a pc to tv converter. whenever i connect the laptop to tv through converter both screens flash in and out going black and then good again for a few then blank again and so fort without stopping.
I want to add another HD to my PC but all my sata ports are used up, the only other option would be to buy an IDE to SATA converter.
If I buy a converter will the HD behave as if it were using SATA, will the transfer speeds remain the same? Or will it degrade?
Someone told me it would be possible to add 2 devices using the PATA/IDE ports, but so far I've only seen converters that only have an option for 1 IDE device. How many devices can the PATA port support?
I have Windows 7 home premium on my computer, and I used the windows backup software to create an xml image and recovery cd. I would like to create a virtual machine, load Windows 7 into it, then get the w8 upgrade (I get os upgrades cheaply as a teacher) and try the upgrade in the vpc before I decide to upgrade my computer. I have heard lots of bad reviews about w8, so I will probably skip it as my main os, but I would like to check it out in a vpc. However, I have only installed xp that I downloaded from ms in a vpc, so I have a big learning curve here.So I have two questions:
1) Can I successfully install an iso image of my current os into a vpc that I create on this comuter? Would the drivers be the same in the vpc?
2) What is the best free software to use to convert an xml image to iso to do this?
how can i run my auto cad on 64 bit windows 7. what to do. my id is Please do not post your @mail (that way u are helping to spread the spam), u will be automatically notified in your email when someone post a fresh line in your thread.
I have a USB<->serial converter (several, actually) that I cannot get to work under Windows 7. I know the hardware works.
When I try to open the virtual serial port in a terminal program, I get an error message stating that it cannot open the port. When I try to use the old-fashioned command line method ("copy test.txt com7" from the "DOS prompt"), I get an "Access denied" error message.
More details: My computer is a dual-boot Windows 7 Ultimate 64-bit / Windows XP Pro 32-bit system. The USB serial converter worked immediately under WinXP when I rebooted, and it even works in the WinXP virtual machine under Windows 7. I have the latest certified drivers (from FTDI), which are stated to function under Windows 7 64-bit.
The serial converter appears as it should in the Device manager. My computer has one physical COM port, and I can access that one without any problems.
The serial converter is a USB-RS485-WE-1800-BT from FTDI. I have tried a USB<->RS232 converter (don't have the model number here), but it behaved exactly like the other one. I also started the terminal program as an adminstrator (since I suspected access rights issues), but it did not help.
I have tried uninstalling the drivers, then installing the latest certified driver and the even later non-certified driver, but still had the same behaviour.
Where can I find a converter that is good, I'm afraid I never used one before So im making sure, does anyone have an experience with them, I read some review people saying make sure you device is compatible with the voltages? If I need to check if they are compatible why am i buying a adapter/converter?
well im trying to convert some videos from MP4 to AVI.so far im having not much luck, i have tried a few programs like wondershare and prism video file converter.im either loosing alot of picture quality or its taking all day and still loosing quality.
is there a simple program that converts batch file to .exe file? I found this: Bat To Exe Converter - CNET Download.com But some users say its virus/malware. Can someone confirm that or give a diffrent link?
