Activation Period Expired, Key Blocked, How To Activate
Apr 21, 2012
I purchased my Windows 7 Pro and installed it, thinking that I would activate it later, then didn't use the computer for some time. Now, when I attempt to activate, I'm told that my key has been blocked. The only solution I'm being offered is to purchase another key.
My laptop says that the windows activation period expired and asks me for a activation code. Well, i did a little research and found a way to see how many days remaining left for the activation. When i saw it in the control panel, it says that my windows is activated and even shows the activation key! My desktop is still black and it still prompts me that it is still not active.
i'm trialling out Win7 Ultimate on a machine here that i'm thinking of upgrading to win7. the only problem is, it only lasts 3 days and when i do the re-arm trick it only lengthens it by another 3 days? this is the trick i've been using and they say it lasts 120 days? [URL]
i need more than just 9 days to test out win7 fully before i make the upgrade move on this machine.
So, my Dad wanted my old laptop because I don't use it anymore. I factory defaulted it however, a message popups stating the following, "Sorry, this trial version expired on October 23, 2042." I'm not sure whether it's windows 7 or not.
So I am having a strange problem with a PC. The hardware seems to be working. The same problem happens on all interfaces (wired and wireless connections). I cannot get access to the network period, even though the computer has a valid IP configuration via DHCP.The strange thing is that Windows 7 says that it has internet access up until the point I try to access the network or internet with any application. IE causes a loss in connection, Firefox, Windows Updates, etc.So I have tried this so far at the command prompt to no avail.netsh int ip resetandnetsh winsock resetWhat do you all think? I am thinking that a reinstall of Windows is needed.
I have this problem with Windows and it's getting really annoying. At first I thought it only happened when recovering from sleep mode but I have since been proved wrong. I have gone into Power Options and set my laptop to never go into sleep, never dim the screen and never turn off the display. I then went into advanced power settings and set the hard drive to never turn off. I have since realised that Windows 7 will only freeze after a period of inactivity whether there is an open program or not.
I'm hoping someone could give me some pointers on how to go about investigating my PC switching itself off after approximately 10 minutes of inactivity (not sleeping, as Windows is configured to do after 30 mins). The PC is used as a media centre with xbmc running as the frontend.If I leave the computer unattended whilst in XBMC. the computer will switch off after approximately 10 mins. I haven't (yet) checked if it happens outside of XBMC, though I suspect it will.The eventviewer shows: The previous system shutdown at <time> on <date> was unexpected.But nothing else of significance.The reason I'm convinced this is software related is because the shutdown always occurs around about 10 mins after leaving the PC alone, with no input. I havent timed it precisely, but will do so when I next get a chance.If I am using the PC in any way, or watching a film, it does *not* shutdown. There are no errors apart from that in the eventviewer log - i.e. no boot menu when you power back on to recommend safe mode, no message on starting windows to say it shutdown unexpectedly. I havent actually observed the shutdown myself yet, so Im not sure if there is a bluescreen or not.
What is the right way to search for mpg files that saved last week I put the search in this manner. *.mpg 7/1/2011 - 7/7/2011 It said it couldn't find a file but I know I saved a couple in the past week.
I have a rig I use occasionally, as HTPC and occasional mule work, file service, etc.I would like to not have it simply sleep when I have left it running and not returned, but rather have it shutdown properly.Is there a way to do this within Windows 7 controls, or is there an aftermarket, shareware, or scripting way to do so?
So since the other day, Add And Remove programs has given me some trouble. Basically, when I went to the start Menu to work it, it didn't open up until I made a shortcut for the Desktop. And then it gave me the message that in all programs, to be blunt it couldn't find it- while I can't access it now, it said it couldn't find the program and asked me if I wanted to Admin Remove it from the list- this did nothing. And now, again, it doesn't work period. I've tried a system restore, but going back the farthest I can, it still doesn't work. Is it possible to completely reinstall Add And Remove Programs, or somehow fix it?
How do I configure Windows 7 to lock my RDP session only (but not the console session) after predefined time of inactivity (idle)? By default Windows 7 does not disconnect or lock RDP sessions.
Thinstuff F.A.Q | Support Topics - Config RDP timeout. Disable Remote Desktop Auto Lock Screen on Idle - Lock via Screen saver. How to Disable Lock Screen Using Group Policy | eHow.com - Lock via Screen saver policy.
this is the second time I've gotten this message in the last 3 days and both times my Pc was turned on and left when I was absent. Here are the details!
Wake on LAN always works. Wake on WAN works via dslreports after very short period of time after sleep. Wake on WAN DOES NOT work after long period (~5+ minutes after sleep)
It would appear I have the correct settings set given the scenario. I've done the obvious.. Set BIOS and Windows settings correctly to my knowledge. I'm lost as to why I can't get it to wake up on wan after while.
Why does my screen sometimes goes blank after a period of inactivity ( like 8 hours )? And sometimes not!. My monitor screen just turns off ( yellow light ). Then i just turn my mouse and screen goes back to normal. ITS TOTALLY RANDOM!
I disabled the screen saver and I disabled the option of the OS turning off the screen. Yet, the screen will still turn itself off after a period of inactivity. I'm currently using a Asus Monitor 19'
my pc is: 7 3770k 3.5 ghz Asus Gtx 680 Asus Sabertooth Z77 2x4gb ram DDR3 Corsair Vengeance White 1600 LP Arctic Be Quiet Dark Power Pro 1000W drivers 301 WHQL.
It seems i have narrowed down my issue that I have been dealing with for it seems like months now. Well essentially my system will reboot anytime it sits for an extended period of time (about 15 to 20 Minutes). My computer will go into standby mode. I do have it set for my computer to never sleep but only my screens. I have followed the BSOD instructions and do and those to attach to this post. Here is the additional information regarding this problem... Is Windows 7 . . . - x86 (32-bit) or x64 ? - x64 - the original installed OS on the system? Yes - an OEM or full retail version?Full retail version - What is the age of system (hardware)? Eh, varies video cards about a year old, memory and hardrives are about the same length of time. Chip is fairly new within a few months. - What is the age of OS installation (have you re-installed the OS?) OS was freshly reinstalled on 11/17/2011. All drivers for all pieces of hardware in my machine have had the newest drivers updated, including my video cards. I have also done the BIOS update for both of my video cards available from Palit. Oddly enough i can play Starcraft II for hours and no issue with rebooting... only when it sits for an extended period of time as mentioned earlier.
i've just built a brand new computer. Everything has been working fine except the web browser has been acting weird. I use google chrome, which is updated. Everytime I start my computer upon sleep mode and start up the browser, it reads that it cannot find the webpage "webpage has expired" or "Oops, Google Chrome could not find www.*****.com". So what I do is keep reloading the webpage for 2-5 minutes and eventually the webpage will load. From there on, if I continue browsing, it will work just fine besides being slower than usual. If I leave for an hour and come back, the same bullcrap happens. AVG didn't find any virus, I ran AVG PC tuneup to clean it up a little. I tried everything, so I am starting to think it may be a Spy Ware that AVG can't find....
I use Internet Explorer, Firefox and Chrome. Firefox is filled with privacy tools including Privoxy, Ghostery and Disconnect. My other browsers do no have anything. I use Windows firewall, Avast Free and Full version of Malwarebytes with malicious web-site blocking turned off. I also use Spyware Blaster. I use Windows 7. I am behind Cisco router.
Problem: When I use facebook.com either https or http, after a certain period of times or page visits, the facebook stops loading and "hangs" on a page not going back or forward. I either have to wait, or close it and open another browser. This has been going on for quite some time. I tried clearing everything with CCleaner, flushed DNS, Etc. When I ping, I get all 4 responses.
My computer gets at least ONCE BSOD every time I turn it on after a long period of shutdown. It also sometimes randomly just shuts off or give me additional BSODs. It has got to the point that I can't even load to windows recently, which lead me to reformat my computer. I know the drivers here are not the latest ones, I am trying to use only the drivers from the CDs that came with the hardwares because the last time I used all the latest ones it still caused BSODs. I am not sure what other information I need to post up.
Windows 7 Ultimate x64 - fresh reformat ASUS M4A77TD Pro AMD Athlon II X4 635 2.9Ghz Socket AM3 95W Crucial 4GB DDR3-1333 (PC 10600) MT16JTF51264AZ-1G4H1 (It's a 2x 4GB set, but I'm just using once at the moment to filter out problems) SAPPHIRE Vapor-X Radeon HD 4850 1GB 156-bit GDDR3 Western Digital Caviar Black 640GB 7200RPM SATA Antec Trupower 650W
When activating the open lic product I get an Error Code of 0x8007232B which translates to "DNS Name does not exist". I am installing from the image downloaded from the Microsoft License site. Install went fine. Just having a problem with the Activation.
I've recently installed a new HDD, and my previous had Windows 7 Home Premium installed on it. When I installed Windows 7 on this HDD, it asked me for the product key. I seem to have misplaced said key, and tried to find my key via finders, etc. I found one that is in the finder and the CD file, but it gives me an error that states my key is a default key that cannot be used for activation.I've also noticed that it says 2 Days until Automatic Activation. What is this, and will it activate Windows 7
recently i made a post on my netbook's problem to activate windows, when I used Vista, unfortunately i couldn't. Well yesterday i updated my computer to Windows 7 Ultimate 32 bit, i tried to activate windows but at the point i give my product key, it says that the key i typed is not a windows 7 one.
I paid £30 for the Windows 7 Professional Upgrade as I'm a student. Yesterday I bought a new 500GB HDD and some more RAM to use for Windows 7. I downloaded the files from the link provided in the e-mail I got, and extracted. I was then given a strange error message, which upon Googling turned out to be because I was running XP 32bit whilst trying to install a 64bit O/S. One of the workarounds was to burn the setup to a disc using OSCDIMG and Nero, and install from boot.
I got my Windows 7 Home premium about 18 months ago and have never had a need to use DVD maker. So when someone told me I could use it to make menu's on my home movies I wanted to try it.So I got to "Programs and Features" to activate DVD maker but it won't work.It gives an error "Unable to install some features"Can I download it ? On the Microsoft website I see only a developers kit for Vista.
Recently on a site that explained how to install Windows 7 upgrade there was info on how to remove your Windows 7 Activation Key after activation.
The reason I want to do this is so that someone can't run Magic Jelly Bean and reveal my key. This happened before so that fix explaining hiding or removing it sounds great.
I've searched high and low and can't find this info anymore. Has anyone heard of how to do this?