ATI 4850 / Samsung LN32A650 Problem
Sep 24, 2009
My computer has a Radeon 4850 hooked up via VGA to Samsung LN32A650
Running Vista Ultimate 32 bit, no problem, TV is detected and native 1920x1080 resolution is supported.
ATI Catalyst 9.9 is installed.
Running Windows 7 64bit (updated with latest patches) and Catalyst 9.9 64 bit drivers causes a "Mode not Supported" message on bootup.
I can get the Windows 7 to go to 640 x 480 mode sometimes and then change the resolution to 1366 x 768 but no higher.
I have seen other people with similar but not identical symptoms but no clear solution.
View 9 Replies
ADVERTISEMENT
Jul 21, 2009
I've a single ATI with dual monitor connections,
as Im using windows 7 and the latest Windows 7 x64 drivers from ati (after installing all drivers in the latest history)
I lose my second screen(screen remains in sleep mode) after the sleep mode initiated . It seems to be a programming error in the driver...
I can get the second screen up by the following sequence simple logging out --->>
switch User ... logging back in ( it takes some time after loggging in though....
Is there a way to detect what sequence(command) is sent to the screen and if I could add that sequence in the loggin...
I've the impression service from ati is bad they've simular reports dating from the beggining of Vista and never bothered to change anyting (by the way never had such problems in XP).
View 7 Replies
View Related
Dec 27, 2009
So yeah, everything was working fine when I was in XP SP2 a month ago.
I upgraded to Windows 7 (fresh install) and I've been having a ton of problems.
First there are screen-redraw problems in almost every application
Photoshop and illustrator are the worst affected. Sometimes when I type text, it's 'streaming'. Everything was fine under XP. Even when I drag on desktp, it kinda' lags.
Second when I play games like counter-strike, the fps keeps spiking every 2 minutes, which was not present in XP. I used to get flat 100fps on XP now it hardly touches 100.
I've updated to the latest graphic card drivers and installed hotfix etc., still no avail.
I think this is most likely a graphic card problem, so if someone could advise me or help me solve this, that'd be much appreciated.
View 9 Replies
View Related
Nov 14, 2012
Like the title above says i need something more powerful than the xfx radei HD 4850 1GB but not to expensive, Sure it still chugs a long fine but lacks newer dx features, I only payed $130 when i bought that card a cpl years ago but I'm looking for something cheaper than can beat it in performance. That and ati just put that card in legacy support Model HD-485X-ZDFC rev.2.1 if you all want to look up the specs has double lifetime warranty one of the reason i bought it, Had it replace by xfx once when capacitors started leaking in an older revision of the card.
View 5 Replies
View Related
Sep 28, 2009
I purchased my new computer on Christmas 2008 due to the sales they had that day. When I first got it, it work perfectly fine without even downloading the drivers. I'm a developer for a game and I use various software needed for graphics editing. I play a 10 year old game (Sony's Infantry) almost everyday on average for 1 to 3 hours a day and my system temps are pretty normal. Around 40-50C temps when playing. I use compressed air every 2 weeks and my case is nice and tidy so there's no dust bunnies or anything of that sort.The problem arose during the month of August 2009. There were no artifacts or blue screens or anything like that. The computer would just suddenly turn off on its own and when I tried to power it on, it did not display a picture. I saw the CPU fans spinning, the HDDs were running, all the cables are connected properly, the video card (sapphire 4850) fan was on and there's 1 beep code.
I asked my friend to borrow his old 8600GT and my computer worked normally. He suggests that my PSU may not be supplying enough juice to the GPU. I thought it might have been the mobo. But my friend is more knowledable than I am. I ended up buying a new PSU. The PSU ended up not solving the problem. Then I buy the same exact card that gave me the problem and a new motherboard and installed the drivers.. that didnt do it either. With basically a brand new computer minus the RAM, I end up with the same results.
Original setup:
Intel Q6600
Sapphire ATI 4850 HD
Asus P5E
Antec 500W
G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800
Antec 500W Continuous SLI Certified CrossFire Ready 80 PLUS Certified
Windows 7 x64
Windows Vista x64
[code]....
View 1 Replies
View Related
Oct 21, 2009
so i have a Ati hd4850 graphics card and intel core duo e8400
anyway everytime i play a intense game like operation flashpoint dragon rising or call of duty waw or crysis its temprature rises to almost 110 degrees, on idle its 90 degrees.
i have fans runnning on maximum cleaned it from dust, and allowed it beathing space for air vents,, nothing worked.
any help?
View 9 Replies
View Related
Nov 10, 2009
I just installed Windows 7 Professional Version on my computer, it is a high-powered desktop with good specs. My graphics card is a 1GB HD Radeon 4850. I used to have Windows Vista 64bit and it displayed with a clear screen. However, after my upgrade, now the screen is all blurry and messed up. I downloaded ATI CCC and installed the new drivers and STILL, the computer screen is so blurry.
I was really looking forward to this upgrade to Windows 7, but I feel almost forced to revert to Vista because after looking at the screen for about 5 minutes, i get the worst headache ever and my eyes strain awfully.
I use 1920 x 1080 resolution and an HDMI cable, the recommended setting. If I go down to the lower resolution like 1720 x 1000 (not sure if thats exactly what it is) it is more clear, but I lose space and I feel it is still not as clear as it was on vista.
View 0 Replies
View Related
Jul 20, 2012
I have a epson stylus dx 4850 printer need the drivers to download in to my computer.
View 1 Replies
View Related
Feb 1, 2013
i want to download a latest free Samsung webcam for Samsung laptop
View 1 Replies
View Related
Oct 31, 2012
connecting samsung s5222 mobile with my lap top for internet purpose
View 1 Replies
View Related
Feb 4, 2013
How to connect samsung s5620 to internet using samsung kies in pc for windows7
View 1 Replies
View Related
Sep 28, 2012
I Can't Find Samsung Drivers for Samsung Sens R525 Model Code NT-R525-AS55B. It's For a Korean student at my dorm.
View 5 Replies
View Related
Nov 15, 2009
I was wondering if Samsung have released drivers for the R60 laptop that are fully functional in Windows 7, when I installed Windows 7 I had to search for all of the drivers myself, I was given a disk with the laptop but it only works in Vista. When running a benchmark test, the graphics were much better in Vista because I dont think I can find the right driver for the graphics card in Windows 7.
Also, a lot of the Fn buttons dont work anymore, for example changing the brightness, turning off the display, showing the battery level on screen, etc. I assume this is done through the chipset driver which I never had to install or even looked for.
Also, one last thing, with my graphics card on Vista I get a little ATI icon in the notification area, along with the Catalyst Control Centre, although I never get this in Windows 7.
View 1 Replies
View Related
May 5, 2009
i just installed the latest build of Windows 7 (build 7100). and there are a few problems with my graphics options. There are 2 systems that i tried this on and both are having the same problem. The first setup has a Ati Radeon X1650 by MSI, and the drivers install, signed by WDDM. Now the monitor/tv that i am using is a 42inch LCD TV, and has the 1920x1080 resolution, that is its native resolution. Windows 7, supports the resolution and has it as the recommended resolution, however, when i select it, my monitor says "mode not supported" this is the same problem i have with the HD2600XT card from ATI.
Both of these cards work in Vista Ultimate, Vista Home Premium, Vista Business, and XP Pro SP3 and XP Home SP3, and even tried Server 2008 and server 2003. all of those OS's work with the native resolution on the monitor except the Windows 7 builds. anyone have an idea why this would be??
also, for the HD2600XT i did install the latest ati driver 9-4, and nothing is fixed. right now i am running it at 1280x768, but its skewed.
if anyone has any info on this it would be great, as i have tried everything.
i have also tried installing the 9-3 drivers on both cards, manually and using the installs. the manual way was to unzip the driver package and in device manager install the drivers myself.
The one system i have plugged into it now is a Shuttle Barebone SG31G2B, 4 GB of ddr2/800 ram, quad core q6600 2.4ghz, and the hd 2600xt.
View 9 Replies
View Related
Feb 9, 2012
Set up:
OS: Windows 7 ultimate 64-bit
Graphics card: Radeon HD 5450
This graphics card is connected with a samsung syncmaster 2253bw (Main monitor) and a samsung LED TV ue40b6000vpxxn (HDMI to HDMI).
Screen Resolution Syncmaster: 1680x1050
Screen Resolution LED TV: 1920x1080p
Problem Description:
I've connected my graphics card with the hdmi 1 port of the led tv. The tv only shows a crispy image of the first few boot screens whenever i turn my desktop on. The tv shows the error "Mode Not Supported" once it gets to the account login screen. According to the tv manufacturer's manual, the screen resolution and refresh rate of both screens should match in order to get it working.
Actions taken:
I've tried out all possible screen resolution combinations at the control panel of the pc. None of them gets my tv to show what's on my main monitor screen.
Question:
Are there any other steps I can do in order to use my tv as a pc display?
View 3 Replies
View Related
Nov 4, 2012
drive for samsung for LE40A567P2WXE
View 2 Replies
View Related
Nov 22, 2012
Currently having resolution issues with my 26" Samsung LCD TV (Model #LN26B360C5D) when used with an older Dell Dimension 3100 PC with Windows 7 Ultimate, SP1.After a re-install of Windows 7 done by a colleague, for some reason my TV won't display it's native resolution of 1366x768 which I'm almost 100 percent sure it had before because I didn't notice any distortion or quality loss. I checked the drivers of both the monitor and the adapter and they read as follows:
-Adapter - Standard VGA Graphics Adapter
-Monitor - Generic PnP Monitor
When I first plugged the VGA cable into the PC, after the re-install, a Samsung driver option appeared and then quickly changed itself to the Generic PnP driver. I have searched all over the web and cannot find the corresponding PC driver from Windows that will work with my TV (if that is even the issue). I also tried booting in Safe Mode and into low-resolution 640x480 and changing the resolution manually hoping that would work but it didn't. There are several Samsung drivers on the PC when I deselect the option "show compatible hardware" in the screen resolution window but I can't figure out which driver works for my tv.
View 7 Replies
View Related
May 29, 2009
So I got a samsung mobile phone and I use Samsung PC Studio (latest version, upgraded etc) to transfer files. I also can set that mobile phone in "Removable disc" mode, and then I access it like a removable disc (like a flash drive).
But none works. In Studio app my phone isn't recognized, and I can't either do anything in removable disc mode. I'm using RC1.
View 9 Replies
View Related
Sep 6, 2011
I am trying to isntall the New Samsung PC Studio for my Samsing phone to connect to my PCI keep getting this error messageso the message is blank! How can i find out what this error says, or perhaps as to why i cannot isntall Samsung PC Studio?I am running Windows 7 Home Premium, my system is a Dell Insprion 530s
View 2 Replies
View Related
Nov 16, 2012
I have a Samsung NP300E5A-A03US laptop, It has it's own interface for it's updates, it keeps telling me I need a bios update, I have called Samsung support, chatted with Samsung techs. I have done this update at least 15 times, 2 different ways. The tier 2 tech told me that I didn't need the update, He said why do you think that your computer needs a bios update,and I said, because I keep getting these messages that I need it, and it is in the interface as needed. He said, you don't really need it, I said, why does it tell me I need the update. He said ,is your computer ok?, I said, it has some performance issues, and it turns stuff on and off by itself.I have talked to at least 5 different people ,they all make me go thru the same steps. I keep telling them, this won't work, I have tried it ten times. They are starting to get rude. I googled bios updates and Samsung, and a lot of posts came up. Can someone help me and also to understand what bios is, it says it helps with computer stability.
View 7 Replies
View Related
Dec 7, 2011
Nearly got all my new build together & ready to install 7 Home Premium 64bit, on a I5 2400, 8GB DDRII.The Samsung HDD is 1TB should/can the windows be installed as a single C drive partition or would it be best to partition it. Ideally I wanted all the C drive in one place. Not sure what to do, ideally do not want a redundant partition.
View 6 Replies
View Related
Aug 6, 2009
Does anyone know where I can download the drivers adn the magic tune software for this monitor Samsung Sync Master T240 LCD? Or do they know if samsung are going to write drivers for windows 7?
View 9 Replies
View Related
Aug 29, 2009
I have a Samsung CLP-300N network laser printer, and I am using Win 7 x64. If I use the Vista x64 driver, a error comes up and says wrong version of windows, even if I run it in compatability mode.
Anybody else having this problem.
When I had x32 RC the Vista 32 bit drivers worked
View 3 Replies
View Related
Jun 21, 2012
I just plugged in my old samsung lcd/tv Model # LA22B350F2 but the display is kind of over-exposed..extreme bright. Cant even find it on device manager. Searched for drivers but failed. Running Windows 7 Ultimate 32-bit, on-board GPU (DG35EC).
View 1 Replies
View Related
Sep 27, 2009
USB modem Samsung sgh-z810 works in Windows 7.
1. connect modem to USB, install all required drivers and software (if don't work, use compatibility mode with Windows XP)
2. install VMware Workstation
3. install Windows XP on VMware Workstation
4. run XP and install all required drivers and software for modem (it's automatic)
5. now you have internet on running Windows XP on VMware Workstation
6. disconnect from internet on Windows XP
7. run connection manager on Windows 7
8. and now trick, add new HW (VM>Settings>Add>Network Adapter>Host-only>Finish) Network Adapter
9. wait few seconds and connection manager find modem on windows 7 (WTF?)
10. now, you can connect to the internet using connection manager in Windows 7
11. close VMware Workstation and enjoy ;-)
I don't know how it's possible, but it works! Cheers!
View 6 Replies
View Related
Oct 5, 2009
Who knows where can I get or how to install the driver for printer samsung scx-4100?
View 3 Replies
View Related
Nov 7, 2009
I installed Windows 7 on my toshiba notebook. Everything is fine, but I cant use my 3g modem. The samsung sgh-z810 works on vista and xp.
on xp and vista, when i plug in first time to machine, it install a virtual cd, and run setup.exe from it (it is modem's the flash ram). after setup xp and vista recognize this hardware as modem (and card reader) and works.
on Windows 7 after the first step (when setup.exe closed) the Windows 7 doesn't recognize the modem. the modem is not listed on device manager...
i read, that will works if i make virtual xp mode, but my laptop not support this mode.
i saved the drivers from XP with driver-magician, but i cant add device to the device manager. the hardware not shown in the list.
i want to "add as older hardware" to add device in device manager, but i cant use the driver .inf files. when i click on it, the device's list is empty, can't choose from the manufacturers / devices list.
i can use modem if i run virtual machine with installed XP on windows 7, but Windows 7 "alone" cant recognize this s h i t.
View 4 Replies
View Related
Nov 21, 2009
I am trying to find a driver for my Samsung Monitor (LN32B360)(Windows 7) - is anyone able to help?
View 3 Replies
View Related
Nov 24, 2009
Windows Vista recognizing my phone: Samsung SGH i900 Omnia successfully and syncs via USB connection! After I migrate to Windows 7 and found that no driver for SGH i900?!? If anyone knows where it could be downloaded for SHG i900 driver I would be very grateful to him!
View 4 Replies
View Related
May 2, 2009
My current monitor driver default by Windows 7 is generic pnp monitor.
with this i cant get my refresh rates higher.
i downloaded the samsung drivers from their site, but when running the file i get "cannot open monitor driver, please check the monitor driver or cd"
ive tried runnning it in compatibility mode as well. im on x64
View 4 Replies
View Related
Sep 30, 2009
I’ve got a Samsung NC10 netbook and how could I install Windows 7 home premium on it that I have pre ordered.
View 3 Replies
View Related
