100 Mbps Speeds On 1000Mbps Network
Aug 16, 2009
Problem: Can't get file transfer speeds over 12MB/sec, avg is around 7-8MB/sec, this happens system to system, or system to NAS, or NAS to system
The setup:
I have a 24 port linksys gigabit swith, 6 computers, 5 NAS devices, all gigabit
every system on the network, other than the nas, is running windows 7
the switch is registering gigabit connections, indicated by the link lights
Jumbo frame is ON and is supported by all systems
What has been tried:
i have turned remote differential compression OFF, from what few articles i read on the web
tried different cables
tried other ports
cycled everything
updated drivers
tried a separate switch
DHCP on/off
Jumbo Frame on/off
anybody have any insight as to what to try? i have been looking all over the web and only found the concept of turning remote differential compression off.
NAS is a iomega ix4
View 6 Replies
ADVERTISEMENT
Oct 17, 2012
My PC's network card is configured as 100 Mbps My NAS Drive is configured as 100 Mbps
My Home Hub 3 shows both connected at 100 Mbps, yet I'm getting a maximum of 1.3M transferring a file to the NAS.
Is there any way I can increase this ? I get the same speed from my 20Mbps download from my DSL.
View 1 Replies
View Related
Dec 5, 2012
I've been having some issues with my download/upload speeds lately after upgrading mobo/processor and OS to 7 x64 and I haven't been able to track it. My average wired on other computers are around: 25 (download), 7 (upload) and wireless I generally see: 13 (download), 4 (upload).This particular setup was okay before, and I have another wireless router set up on the other side of my wall giving me full service. I don't have wireless problems with any other devices other then this one.
View 1 Replies
View Related
Nov 9, 2012
Im asking about the MbPs of my internet that Im using right now please.
View 2 Replies
View Related
Jan 31, 2012
I just upgraded my internet connection to 30 Mbps. After running more than 50 speedtests on my computer running windows 7, I came to the conclusion that there was something wrong because I was never exceeding 17 Mbps on speedtest.net! I called my ISP and they told me that if they send a tech he will plug a laptop directly to the modem and if he gets 30 Mbps I would have to pay.. while he kept talking I used my Iphone (which is connected to the 30 Mbps connection through my wireless router) and surprisingly got speeds between 21 Mbps and 23 Mbps ! I then realised my modem or router wasn't the problem.
I tried uninstalling AVG antivirus (saw that on some forums), didn't work. I tried to plug my ethernet wire directly in my computer instead of passing through my router, didn't work. I tried the Enable QoS tweak and set it to 0% instead of 20%, didn't work. I'm using windows 7 ultimate 64 bit - Intel Core 2 Duo 3ghz proc - 8 gb 667mhz DDR3 memory - Onboard 100 mbps network adapter - Geforce GTX 560 (I know it's a waste with the Proc I have but i'll upgrade PC soon). BTW, I upgraded my internet connection from 8 Mbps to 30 Mbps. the 8 Mbps was maxed out on any speedtests or any popular torrents. After I upgraded I'm getting max 17 Mbps... it seems to cap there for an unknown reason !
View 16 Replies
View Related
Oct 18, 2011
My son's just got himsself a new PC and is having problems getting the powerline ethernet adapter to work with Windows 7 (worked fine with Vista as of this morning).
what drivers might be useful (the adapter is a generic one) in getting this to work, and where they might be found?
View 1 Replies
View Related
Sep 26, 2012
I have a Dell Studio XPS M1330 Laptop, has NVIDIA motherboard. I think ever since I purchased the PC this problem has occurred.Problem: NVIDIA nForce 10/100/1000 Mbps Ethernet card will only detect an ethernet cable when I restart. The minute I unplug it, it will not detect it if I plug it back in. I have searched high and low for a solution but have not been able to find one that works. I have disabled the sleep setting on the device and made sure the computer is not allowed to turn off device to save power.Drivers are updated.
View 2 Replies
View Related
Jun 21, 2012
I need in the next two days to find a quick fix to plug a front panel USB 3.0 box connector into my ASUS M5A97 or get it to function in any possible fashion whether at USB 2.0 or 3.0 speeds or whatever.Any products within 20 miles of my zip code at 19073 are fair game. I recommend perusing url... for the PA store inventory.
View 1 Replies
View Related
May 30, 2011
I have a Panasonic Toughbook CF-30 MK3. Myself and many others are trying to figure out why we can't get SATA II speeds. There is nothing in the BIOS that helps, nor the manual. The only thing that the BIOS says in the System Info is SATA-AHCI. I have tried several different SSD's and they all max out at around 130Gbps. Someone mentioned that it might not support S-II, but I have a very hard time believing that with the computer only being 2 years old.
View 2 Replies
View Related
Feb 11, 2011
We have a 20Mb line with a 2Mb upload. When checking speed testing sites, we're always getting full speeds.When downloading using Steam or uTorrent (Anything that manages its own downloads) I can get 2.4 - 2.5MB/s download.But when I'm using any form of web browser, firefox, IE ect. Loading pages can take 10-20 seconds, pictures 30seconds-2minutes. Downloads are much much slower, around 500KB/s and while videos usually load fast enough they sometimes drop their connection and stop buffering.
View 3 Replies
View Related
May 26, 2011
I am hoping someone might be able to shed some light on this problem. When transferring a 3 gig file from my NV+ to my internal hard drive I get speeds of around 300 Kb/s and message saying the transfer will take 18 hours.When i transfer the same file to my wifes computer over the same network the speed jumps to 30MB/s which is what it should be. I cannot understand why this is happening as my wife's computer is way slower than mine with only a core 2 duo processor and 2 gig of ram
View 9 Replies
View Related
Jun 24, 2011
I have AT&T DSL internet service and I'm using their 2-Wire 2701HG-B modem/router plus all my phones lines connected to a phone or Sat receiver have their filters installed on them. I'm subscribed to their 3Mbps plan but for quite awhile now I've noticed very slow internet speed.Going to Speedtest.net - Results or Speed Test | Bandwidth | Broadband Internet Services I'm getting download readings as low as .23Kbps to 2.73Mbps (the latter very, very seldon) with an average of under 1.0Mbps.AT&T did a ping or something and can tell I have noise on the line so they say it's probably either the router or one of the phone lines so this morning a tech dropped off a new router (same brand/model) but I can't see any improvement.When the tech came the other day he hooked up his small modem from my phone line to his laptop and ran a speed test and it was consistently 2.5Mbps.So are there any settings on my modem/router that could be slowing things down?
View 1 Replies
View Related
Dec 15, 2011
I can�t get anything faster than 5Mbs transfers over my network. This is what I have connected. I�m using a Dlink DIR-655 Router, set to connect at 1Gbps, Western Digital NAS drive, it says it�s connected at 1Gbps, and my laptop is set to connect at 1Gbps also. My laptop has a Realtek NIC, with the lastest drivers that I can find. Every thing is set to 1Gbps and, they all connect at that speed, but transferring between my NAS and my laptop, I ONLY get right at 5Mbs. Everything is connected with Cat5e cables, no long runs or anything. I�ve looked at several forums to figure out what I can do to get higher transfer speeds
View 1 Replies
View Related
Jun 13, 2012
since I got my new setup, temps have gone up like crazy and I cannot find the source of the problem. Using Prime95, my 955BE goes as high as 65-70 degrees celcius. This is at standard clock and voltage, which are 3200mHz and ~1.35v.The cooler I use is: Arctic Freezer 7 Pro and thermal paste: Cooler Master something. Case fans are turned up to medium instead of low and the heatsink seems to be placed correctly.With my old motherboard (M4A77) and this exact same cooler, temps would stabilize at ~54 degrees at full load.
View 6 Replies
View Related
Sep 12, 2011
I have a macbook pro, I'm running windows in bootcamp. I installed speedfan but I don't see anything about fans.
View 3 Replies
View Related
Jan 18, 2010
I recently completed a clean install of windows 7.
I have the i7 950 on the ASUS Rampage II Extreme motherboard.
I am currently experiencing extremely slow usb tranfer speeds.
I get transfer rates on average of 650 KB/second.
I checked the device manager and 2 of the 8 usb controllers say enhanced. The other 6 do not.
According to the specs of the board, all 8 should be usb 2.0.
I have tried letting the system update the drivers, but for all, it retains the current driver.
I even went so far as to disable the controllers and restart. All 8 returned, but with the current drivers.
I tried using the install CD that came with the mobo, but it states that it cannot run using the current OS.
Any thoughts?
View 2 Replies
View Related
Feb 5, 2010
I'm dual booting windows 7 64bit and windows vista home premium 32bit.When using windows 7 the internet speeds when browsing ,streaming and downloading are significantly slower than when using vista. I've tried a couple of solutions like disabling autotuning, resetting tcp , disabling kaspersky,running in safe mode, eliminating programs one by one but nothing seems to help.
View 12 Replies
View Related
Jul 24, 2012
Just had an issue since I formatted my PC.... Never previously had an issue with it, but my PC now has all USB ports operating at USB 1.1 speeds. I've installed all drivers for the motherboard and nothing is shown as missing drivers, but every time I plug in a USB 2.0 device, I get a message saying it can perform faster if put into a USB 2.0 port.
View 2 Replies
View Related
Dec 22, 2011
i just got a new windows 7 (gateway fx)(os)Windows 7 home premium 64-bit (cpu) intel core i7 processer 2600 (RAM) 16gb DDr3 memory (HDD) 64gb solid-state drive + 2tb hard drive (optical)blu-ray / super-muti combo drive.idk if that helps but i need my download speeds back to normal cuz im downloading wow and other big games in the (gbs) so if u can help that would be GREAT (normal speed 150-200 kbs on old windows xp and on windows 7 10-50kbs
View 4 Replies
View Related
Feb 2, 2012
I have had to revert to Int Explorer 8 to use the Internet at reasonable speeds.]
View 2 Replies
View Related
Dec 8, 2011
I used to have an Acer laptop until the screen cracked about a week ago and I replaced it with an HP Pavilion. When I was using the Acer laptop, I never had any problems with my college's wifi, but a few days after I switched to the HP laptop I noticed a decrease in browsing speed. This decrease was extreme if the page I was trying to load contained images/videos. Additionally, my download speed was horrific, at about 9 KB/sec. Lastly, I have had trouble connecting to the network, with my computer telling me it can't connect several times before it connects. I uninstalled Java, disabled firewall, uninstalled antivirus programs, cleared browser cache, which helped a bit. Then, oddly at about 8 PM last night, the browsing/download speed of my computer returned to normal. However, it is as slow as ever this morning. I'm fairly certain the increase in speed was due to the fewer number of people connected to the network.
View 1 Replies
View Related
Jun 16, 2012
So today my friend and I, who live in the same country, was downloading this file.It was around 6GB, which is irrelevant, but yea. It was from the same site, we have the same internet, yet he was downloading with 2.6MB/s while I was downloading with 1.338MB/s and it stayed like that for the remaining 40 minutes. Didn't even move at one point, while his went from 2.1 to 2.6 over 10 minutes. Worth noting, we use the same ISP, he only have 25/2 while I have 50/5, and I could easily download 2 files with the exact same speed (1.338MB/s each but not 1 with 2.6MB/s or more.There's also a client downloader, for this game, where he again got 2.6+ whereas mine always stayed at an amazing 80-180kb/s. I tried disabling anti virus, firewall, Malwarebytes, nothing changed it. I know you're thinking it's just the seeds or site that is limited to an x number of download speed, but it really can't be the case in this. It happens with every site I try. It's always at 1.3xMB/s and never moves regardless of how good it is.
I honestly don't remember, but I don't think this happens when it's a .torrent file, using programs like uTorrent with good p2p. It happens in all browsers, and apparently game client downloaders.I can download 5 different downloads at 1.3xMB/s using all of my available internet, but when it comes to a single file, it for some reason, is impossibleI'm not complaining about the download speed, but it just seems like there's something wrong. My downloads also have a habit of failing in chrome after a few minutes, for no reason. That only happens from some sources though.
View 9 Replies
View Related
Jun 27, 2011
I am currently running Windows 7 64 bit on a new Dell Precision machine. I bought this machine with the sole purpose of running SolidWorks. The machine has some serious hardware in it and I know it can handle SolidWorks, but it seems to run slow. Boot up times on the machine are quite long, and occasionally it will just freeze on bootup or ask me to log in multiple times. Things seemed to be slowly getting faster until a few days ago when i installed service pack 1. Since then the speed has been terribly slow. Just to provide more information, most of the files I use in my models are stored on our server locally. I have a 1 Gigabit connection from the computer to our server, but when I access files on the server it takes forever. Every time i want to open a new part or do some interaction between the server it goes terrible slow. Once i have the part opened the computer seems to run fine. We just installed new infrastructure so i know all the wires are good. Like I said, the speeds were slow, but getting better, but as soon as i installed service pack 1 the slow speeds have become unbearable. Anyone have any thoughts? Is this a network problem or a computer problem? It seems weird that service pack 1 would cause it to become so slow. The server is running Windows Server 2008 R2 64 bit.
View 3 Replies
View Related
Feb 2, 2010
Is there a program out there that can control both the CPU fan speed and the graphics card fan speed while monitoring their temperatures? I use Speedfan for the CPU fan and EVGA precision for my 8800GT fan speed. Maybe even something that changes the fan speed of the CPU depending on the load on it. Any advice is appreciated.
View 7 Replies
View Related
Jan 28, 2012
I just recently got a wireless adapter and installed it and the drivers but i am maxing out at 3mbps on every speed test site. when i boot into Ubuntu with the same computer and same wireless card i get up to 9mbps.
View 1 Replies
View Related
Jan 27, 2011
I have had this problem ever since the summer. I would tell you the speeds I'm getting from testmy.net, but the page is still loading. It's been over 30 minutes.Anyway, I have installed the drivers for the motherboard that came with the disc and such, and I still have no success. It is really annoying at this point, basically not being able to use my computer.
View 5 Replies
View Related
May 21, 2012
I recently reinstalled my OS, Windows 7 Home Premium. Everything went smoothly, reinstalled all my drivers, gamebooster etc etc. But when I went to download all my games, I found that my internet speed had gone down the tube, an irritatingly slow 1mb/s That's only 1/20 of my normal speed. My laptop has a built-in Atheros AR5B93 Wireless Network Adapter and Broadcom NetLink Gigabit Ethernet. All the drivers for these are up to date?
View 2 Replies
View Related
Jan 31, 2012
have been struggling with my system taking 2-3 minutes to find drivers for any memory stick I plug in to any of 3 USB ports on my Acer 1810T. When the process finally completes, the transfer speeds are about 1MB/s or less.Another (possibly related?) problem is when I insert any SD card in the dedicated slot for the first time, everything is fine. Once I remove and either re-insert (or insert a different card), nothing appears. I get a message saying "process is already in memory". I have to reboot to get things working again.
View 5 Replies
View Related
Aug 9, 2012
I have a peculiar issue where I would need to have "Network and Sharing Center" open to be able to see that my my laptop's wireless connection. I would see the signal bar and also see the dreaded red x.Even when I have it open, I can see it refreshing each second; like its losing connection and reestablishing.My internet connection is working and has no issues.
Network and Sharing Center - Open
Network and Sharing Center - Open and refreshed
Network and Sharing Center - Closed
View 3 Replies
View Related
Aug 9, 2011
I'm having difficulty trying to get my new Windows 7 pc set up to share files across my existing home (wired) network which consists of 1 desktop pc running WinXP and 1 laptop running WinXP.I want the 'C' drive on each of the 3 computers to be shared. I've had the 2 Windows XP computers set up and working like this for several years without a problem but I can't seem to get the 'C' drive on the Windows 7 computer to do the same.All 3 computers have the same workgroup name and none of them require passwords to log on to Windows. There are no problems with the firewalls on any of the machines.On the Windows 7 PC when I right click on the 'C' drive and select the 'Sharing' tab, I have set this up to be shared and when I click on the 'Advanced Sharing' button there is a tick in the 'Share this folder' box, the 'Share name' is 'C'. If I then click on the 'Permissions' button, this shows a 'Group or user name' 'Everyone' and this group has Full Control, Change and Read boxes ticked. As far as I can see there is nothing more I can do.
However from my Windows XP computer, when I go to My Network Places and double click on the icon for the Windows 7 'C' drive, I get the message "\Computername is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The network path was not found"I've subsequently set up a sub folder (of the Windows 7 'C' drive) for sharing by right clicking on the folder, choosing 'Share with' and then selecting 'Specific people'. I then set up a group called 'Everyone' with read/write permissions. Now I can navigate to this folder from my 2 WinXP computers.
View 2 Replies
View Related
Jan 30, 2012
My rig uses a Centrino Advanced-N 6230 wireless mini half-card. It reports the correct name except within the wireless network list. Instead of 6230 it reports 6320. I searched the registry to see if I could find the error, but nothing found. It's only a nuisance, and a minor one at that.
View 1 Replies
View Related
