Winload.exe: Completly Black When It Came To Log In Everytime
Aug 28, 2009
my computer has been to alot last three days. First I came home, turned on the computer, and zomg! Blue screen at log in. That freaked me out. I tried restarting it, but the screen was just completly black when it came to log in everytime. So I then started trying to fix it. Did all sorts of checks, but nothing worked. Ended up reinstalling vista, but keeping my old files. Then it worked for an hour or so. Next morning, when I started it, this came up: "File:Windows/system32/winload.exe It couldn't be loaded because it's missing or is broken". It says I should put the vista installation disc inside, then repair it, but it doesn't "notice" that I've put the cd inside. It doesnt seem like it's being detected.
View 9 Replies
ADVERTISEMENT
Apr 5, 2008
I play videos that were recorded from my digi camera and play from my computers Hard Drive, they come out ultra dark and it looks like the contrast is off too. The problem is I can't adjust anything to fix it. The problem is not my camera cuz these vids works perfect on XP! I have a HP Palivon dv6700.
View 4 Replies
View Related
Jun 11, 2009
My computer (Toshiba Satilite, VISTA HOME PREMIUM 32bit.) has crashed recently.It crashed then I restarted it. And it said.
Winload.exe is missing or corrupt". I tried reseting to factory defaultsbut it didn't work. Soon after that, I changed my BIOS settings and put the cd drive at the top and inserted my Windows Vista Home Premium
Installation Disk. After that I got, PAGE_FAULT_IN_NONPAGED_AREA. It was a blue screen thing. I tried many commands in the repair promt
bootrec.exe /fixmbr
bootrec.exe /fixboot, but they didn't help any. I've been looking around and I have found things like it may be a bad stick of ram or my hard drive. I'm not sure which one.
View 9 Replies
View Related
May 8, 2009
I got the error a lot of people got that says windows has failed to start because winload was missing or corrupt. however If I try to run the repair disc while its loading files it freezes then gives me a blue screen. I have tried this several times over with no success. I have tried the same hard drive on a different computer and that renders that computer unbootable too (but without winloader error message) both computers boot fine with a different hard drive when the faulty hard drive is not plugged in (internally -sata) my faulty hard drive is a maxtor, my functioning one is a seagate barracuda. access the data on the faulty hard drive, its very valuable (sentimentally speaking) it would be a bonus to be able to boot it but i at least want to access and backup that data.I have even tried plugging the hard drive in while im already booted into vista, and then it crashes
View 5 Replies
View Related
Dec 31, 2009
LOng story short, I had to restore last night due to what seemed like a video driver problem. I restored, back a couple weeks and it fixed my video issue. It then did the automatic windows updates, including SP1, which I thought was odd, but I went with it. After the download & update the system rebooted...and then it all went downhill. I actually got another error message which I can't recall at the moment, but it was a black screen not a blue.... I then broke out my original windows recovery discs, rebooted and it went directly to the recovery options and screens as I was expecting. The first disc ran fine, backing up files, blah blah.....it said to reboot...and then THIS stuff started.......
View 9 Replies
View Related
Jun 9, 2008
I'm using Vista home premium 32 bit, and it automatically installed an update from microsoft. It then asked me to restart the computer, which I did, but when I did, it wouldn't load again because it said that "winload.exe was missing or corrupt". It then asked me to use the installation cd to restore it, but Vista came preinstalled, so I don't have the CD. How can I fix this? I can't even load to safe mode to restore to a restore point....
View 9 Replies
View Related
Mar 23, 2008
I had an Vista 32 bit version installed and which was used fine.3 days before I had upgrade my PC's memory to 4G, then I find Vista 32 Bit version can not recognize all the memory.So I try to install an Vista 64 Bit version for the test to check if the 64 bit system is ok for me.
The problem is, Vista 32 was installed on to the 3rd partition of the harddisk,usually the drive letter will be E in Windows XP and previous version windows, although it in Vista it display as C drive. I tried to install the 64 Bit Vista in to the 4th partiton. After all the drivers and applications install completed,that seems so far so good. Then I find my previous F drive now names C. The Drive C in Vista 32 Bit names E now. When
I try to boot into Vista 32, the error message : winload.exe could not find.
I used bcdedit try to redirect the device and osdevice to E drive, Vista 32 still could not start normally, the system will hang up in the blue desktop background,seems can not load user profile or sth like that.
I have check the E drive, all the files of Vista 32 are still there.
View 9 Replies
View Related
Dec 29, 2008
I have a compaq laptop with windows vista basic and I want to use the hotkey ctrol+shift+C but I cant because everytime i press them the hp health check pops out! I had try a lot of things but NOTHING the health check is still here with me!
View 4 Replies
View Related
Jul 12, 2008
i just bought vista x64, home premium sp1, and it's been nothign but hassle. i have been working with / repairing xp systems for 6 years now, there is not much that gets me on xp systems... vista however is different. i setup the system about 2 weeks ago, with new parts. the video card was backordered, so i used a 7600gt i had laying around instead. everything installed fine. i hadn't really used it, so yesterday when i recieved the other card, i thought i knew what to do. the new card is an ati hd2600, so i uninstalled the drivers for nvidia, changed out the cards, and it would freeze as soon as i could see the desktop everytime windows started. so i reformated. easy, as i had nothing on the system anyways. installed the ati card, worked fine. all the drivers back in, worked fine. now i am trying to install some programs, freezes everytime. one is nero 8, one is powerpoint viewer 2007. is there anything that works properly with x64? what benefits does x64 have? i haven't seen ANY yet.
View 9 Replies
View Related
Jun 2, 2009
Every time I update Vista Ultimate 64bit SP1 using the Windows update after a restart I get a blue screen. I have to go into safe mode (sometimes the updates are finished at this point when going to safe mode) and in safe mode reboot again and after that all is fine. The updates work, Vista runs fine. It happens every single time I do an update that requires a reboot at the end (Defender definitions update doesnt result in a blue screen).
I would like to fix this before I update to SP2. I have downloaded SP2 but not updated to it. I've only let the computer prepare for updating to SP2 but after this I choose not to proceed. Even after this I get the blue screen. All my drivers and Dell software should be up to date. I've attached the bluescreen message I get each time (don't know if it's exactly the same every time) and some error report Windows gave after restarting from the blue screen....
View 6 Replies
View Related
Oct 16, 2009
i cannot stop widows mail that came w/ this Vista 64, from opening everytime i want to email someone by a website link. Windows mail is not my default email - nor do i want it to be, i don'e even want the livemail to be my default mail application. there is more software that are installed that it shows up in the programs and appl folder where you can uninstall them. Xp was easy to get rid of unwanted junk. I really want to remove this windows mail- and stop it from opening and pushing my default msn email server to the side.
View 4 Replies
View Related
Aug 19, 2009
Now you see it now you don't. Here's the scenario. When I reboot everytime, the gateway static IP address disappears. I have to manually enter it again. Everytime! I'm using Vista 32 Business SP2 on a Thinkpad X60s notebook. Why does this happen and what's the solution?
View 9 Replies
View Related
Aug 8, 2009
My Desktop icons move to new locations everytime I restart my PC and I can't figure out how to stop it.
View 9 Replies
View Related
Apr 25, 2009
i got a computer, wich i baught new in the store's and it had windows vista already preinstalled. it was windows vista home edition 32bit. but after alot of stupid things of me becuz the pc was very slow, i decided to format the whole pc, and install windows xp on it, i got the xp cd , and i putted it in, and it just wont install windows xp on it, everytime, i get the blue screen and it restarted everytime the xp installation, so first you can format the partitions, then it requires a reboot, and then the xp installation starts again from scratch, so its unable to install xp, but thats not my question.
so i decided to download a windows vista ultimate edition, 32 bit, and i burned it on a dvd and i putted it in my computer, and the boot from the dvd was good. then it asks where do you want to install windows, well, the page was blank it could not find any drives, or well, i dont know. then it says you want to load a driver, ( driver?? drive?? ) i dont understand this so good. i was hoping you guys can help me out, and i just want my normal pc back with a good vista, i cannot go to a pc store, becuz that takes too much time i wanna try it like this first
View 9 Replies
View Related
May 15, 2010
I have enabled the hidden built in administrator and have changed it's name but every time i log on it gives me a temporary login anyone know anything please help.
View 3 Replies
View Related
Jul 29, 2009
Recently I have been unable to open any attachments in windows mail which I could previously open. I have uninstalled IE8 and gone back to IE7. When I try to open an attachment now, Microsoft Office Picture Manager opens everytime. How do I fix this
View 9 Replies
View Related
May 3, 2008
I have tried installing Windows Vista SP1 roughly 8-10 times now, with no luck any time. It always gets to 98% complete on the first stage, then sits there for awhile before reverting, rebooting, and trying again. First time I got error code 0x800F0826, and Microsoft directs me here: Error message when you try to install Windows Vista Service Pack 1: "Installation was not successful" or "An internal error occurred while installing the service pack". None of the resolutions work. Then I got this message a few times 0x800705B4. Which I have read is a "Timed out" error. Its always at 98% on stage 1 of 3 that it hangs up before it fails and reverts................
View 9 Replies
View Related
Mar 15, 2008
I have a problem with this graphic card, when I run a game with better graphic details. My computer freeze for 2-5 second, next is black screen for 2seconds(as monitor is shuted down) and next is black screen while i don't stop the game. Next I see this-> I hope that you solve my problem(and see that image) BTW: if this problem was solved on this forum sorry, but on system instantForum i was never been and i don't know how it control. Or if this post is in bad category please send message for me when you move it.
View 9 Replies
View Related
Dec 31, 2008
I've been wanting a new GPU for a while now as, even with the great new drivers, I'm noticing the limitations of my current BFG 8800GTS OC 512MB card in some of the newer games I've got.
I thought I'd see what the new 55nm refresh on Nvidia cards would turn out like but early reports don't sound good at all.
Also every time I look on a retail site here in the UK I notice the prices are creeping up. This must be something to do with the crisis of capitalism, dollar/yen rate etc.
So I thought I'd buy a new card immediately and wait until the end of next year or 2010 for DX11 to come along at a reasonable price.
Sadly my price range won't run to a GTX 280 or 4870x2 ( I prefer Nvidia anyway) so I'm looking at the XFX GTX 260 Black Edition. This has got great reviews and would hopefully tide me over for a year.
View 9 Replies
View Related
Jan 30, 2010
windows seems to boot up partially but does not get to the log-on screen and instead goes to a black screen and all you can see is the arrow shaped mouse pointer and thats all. I put the windows cd in to try to repair the installation and booted from that but still the same thing happens
View 6 Replies
View Related
Apr 21, 2009
Alrighty I went off to work with my pc turned on a few days ago, I come back and the screen is black and nothing I do is responsive to the screen. I then reboot the Pc it leading to a blue screen. Some times when I reboot it will blue screen some times it will just be a black screen that is un responsive. I have tried f8 options in advance boot optiotns, Ive tried re installing windows- it claiming my disk is full. Ive tried system restore it also says I have a disk failure. It wont let me check errors in the properties options on my hard drive. I have done a virus scan(no virus's) and I have 300gigs left of space.
View 8 Replies
View Related
Jul 21, 2008
is that when he tries to delete some files that he previously stored in the C:"Account Name",he gets a message saying that the file is unavailable in the specified location.However,that is not my main problem now,because when I was trying to help fix this problem I typed "msconfig" into the RUN box to get the startup utility box and I unchecked some of the background programs to prevent them from loading automatically when the system starts,in order to speed up the system;but when I restarted the system I can see the first screen, which is by the manufacturer of the labtop;then when vista starts loading, the screen becomes black and don't display anything,although I am sure that Vista is loading successfully but I cannot see it on the screen.
I am assuming that one of the programs that I have unchecked is responsible for displaying. I have tried to do a repair installation by using a bootable Vista DVD but I couldn't because I cannot see anything on the screen.I tried logging in on safe mode but that did not work either. How can I undo the changes that I have made to startup utility.
View 5 Replies
View Related
Jun 12, 2010
I have two users set-up, user K (with Administrator rights I believe and a password) and user N. If I login as user K, after I enter my password my computer will run for a bit (I can see/hear it logging in) but after a few minutes the screen goes black except for my white cursor and nothing else happens. If I then hit ctrl-alt-del I can see the Task Manager and switch users to user N which will start up normally and give me access to my desktop.
View 4 Replies
View Related
Dec 19, 2009
my side bar backgrounds is black and I cant change it back to aero has
anyone find a solution to this.
View 9 Replies
View Related
Jun 27, 2009
I have tried installing many different games on my pc, which are quite new and have been released in the last few years. The installation goes fine, and everything is great. When it comes to launching the game, well, i double click the file to run the game, and i get a black screen. Nothing happens afterwards. It just stays black. 'Ctrl + Alt + Delete' does not work, and neither does 'Alt + Tab', or any other keyboard shortcuts. This results in me having to hold in the power button and turn my pc off like that.
Any idea's on what could be wrong? It is extremely frustrating, due to the fact that i've tried running about 3 - 5 games on my computer, and neither of them work, without a black screen coming up after trying to launch any of them. I've tried numerous things like 'Running as Administrator' and changing compatibillity modes and so on and so forth, but none of that works.
View 9 Replies
View Related
Apr 26, 2008
I was having a weird problem with my screen going black at random after installing any version of Vista, and kept having to force a restart because there was no way to get the screen to come back on. I searched all the forums and it seemed to be very common, but as with most of the forums everyone was argueing about how to fix the problem instead of helping the people with the problem. So I'm posting this one in the hope that it may just help one or two people with the same problem.
My remedy was simply to update the BIOS to the latest version P32 I think from the XFX website, and the problem was no more, I also updated the High def audio driver from the same site, now my machine has been running flawlessly for three days now.
View 3 Replies
View Related
Jan 18, 2010
I was hoping that some of you guys could help me with a problem. As the title says, my screen goes completely black after the loading screen with the green loading bar, but before the usual windows vista circle is supposed to appear. I have also tried to use a vista x64 recovery disk. Here I only get the blue background a mouse I can move around on the screen, meaning I have no options to choose from. Does anyone know what the problem might be? And if so, how to possibly fix it?
View 9 Replies
View Related
Apr 20, 2008
I recently shutdown and restarted my laptop, and my desktop came up black, and I can't get it to change back to my regular desktop. Here's what I've done:
1-Searched and searched for an answer
2-Right clicked to Personalize/desktop background/blah blah...no change
3-Downloaded Wallpaper_enable.reg and ran as admin etc, no change
4-Oh yeah, scanned with AVG, Malwarebyte's thing...nothing shows
5-Ran autoruns to see if I could spot anything...didn't change anything
6-Ran hijackthis...still looking at it
7-Here I am
My thought is that I had removed spyware but didn't restart? ( I might have been tired)...I was so used to just hibernating my system...when I shutdown & restarted yesterday, a reg file was changed, and my desktop went to crapland. i know it's just cosmetic (I hope) but I guess I'm funny that way.
View 9 Replies
View Related
Jun 18, 2008
I have Vista Ulimate 64-bit and everytime that I reboot I get a black screen before the Microsoft Windows scrolling bar.
This is the sequence.
- I reboot.
- I get my bios information screen.
- I get the white, blinking line in the upper left corner of the screen.
- Then the screen goes black with no hard drive activity.
I then can perform a Complete PC restore from my second partition on the same SATA Hard Drive and I will then be able to boot into Vista with no problem.....until I reboot, then I get the Black screen again. It is a vicious cycle.
I have tried to remove video cards (2 x 8800 GTS), memory (4 GB), sound cards (X-Fi Music), load the default bios settings....nothing works. Only a Complete PC Restore cures it, but only until I need to reboot the PC.
View 9 Replies
View Related
Dec 7, 2009
I have Vista Home Premium SP1. I have set my Desktop Background to be one of my favorite pictures. But every half hour or so, without any warning, the Desktop Background resets itself to black, and I have to go back into Control Panel to
reset the background to my picture.
View 9 Replies
View Related
Oct 8, 2009
I run Vista HP/SP2. The other day after various installs, updates and maintenance tasks I ran with no problems and ended the day by putting my laptop into hibernate mode. The next day when I powered on, my system would not come up...my system disk C: was corrupt. I finally got System Repair to run and it appeared to fix and recover my C: disk to the point that I can see my files still exist via Recovery command prompt. However when I
restart, my screen goes and stays blank (black) with my cursor usable but to no purpose. I tried System Repair again but it tells me it can find nothing to repair. I tried starting in safe mode and it loads two screens worth of windows files before going to a blank (black) screen with my cursor usable but to no purpose. The last windows file loaded is a crcdisk driver file.
View 9 Replies
View Related
