I recently built a new pc and got myself a copy of Vista Home Premuim installed on it. After installing Vista everything for the most part seemed fine without any problems or conflicts. After that got all Windows Updates and also latest drivers for my hardware. Now for the problem, even with the specs of my system (listed below) my system take 3-4 minutes to boot. Compared to when I dual boot it to XP and it is sitting at the desktop for me in under 1 minute. I understand that Vista is a more demanding OS than XP but considering.
I purchased my system (Laptop, dual core HP Paviolion dv6700) and installed vista home premium in December 2008. In the beginning system's performance was good but now (within 6 months) it starts so slow. What may be the problem.
I tried everything in here: Boot Up And I still have a slow startup: 30-40 seconds just on the Windows loading bar. When I first installed Vista it was not like this. I tried to figure out what was causing this so I downloaded xperf and did a xbootmgr trace.
I was expecting that Vista's slow performance during startup, logon and resume from suspend would be improved after SP1. After all I noticed that there is no difference at all even after SP1. Even with the latest processor, 2 GB ram, on the highest end HP laptop, vista takes 3 times longer than XP with an older computer, slower processor and less ram. Are there any expectations for the future for performance?
my startups have recently slowed down. I have disabled stuff from the startup selection, and still had no luck. I think the problem lies with the network connection. It seems to be taking a while before it connects to my router. not sure why this started happening usually used to be alot quicker.
My computer takes really long to boot up. probably about a minute or two trying to boot up, then when you get to the login screen and enter your password, the welcome screen is stuck for 20 seconds! After that, the computer is slowly loading...
What's the problem here? I reformatted the computer FIVE times, and it's still slow. I already ran hardware tests and everything passed. Also spoke to HP customer support. he took control of my computer... ran some tests etc... everything was good. If anyone has idea's as to what could be wrong, please do... I don't know what the hell I'm gonna do with this computer
(not sure ifthis is the right place to post it)but i have zonealarm and i recently (last night) reinstalled Vista also im noticing and tremendous increase in startup time from my pc just by running 1 core not all four! if this is the problem can anyone tell me another really good firewall that doesnt make it startup so slow
I've recently "clean install" Vista SP1 Home Premium to replace XP on my Dell Desktop; it's working but start up and shut down are extremely slow. I have a new laptop with same Vista SP1 version but it's much faster on power up and down. By the way, I have CA virus program on the Desktop, but McAfee on the laptop. One major difference between two computers is that I do have MSOffice Bussiness 2007 with Outlook and using the outlook on the desktop but I am using Windows Mail on the Laptop
I am running Vista 64 and installed a program which apparently had a virus or I got it using IE8. I found an entry in the start up tab that was causing a problem. I went into the registry and deleted the item from the startup tab and I also disabled it in the startup tab. The startup tab still shows the item even though it is disabled and deleted from the registry. Why does it still show in MSCONFIG and how do I delete it from the start up entry
I have just puchased my first Windows Vista computer - an HP laptop. I have purchased at leat five laptops since 2000 so I am familiar with setup and comfortable with installations etc. I have three questions here.
1. My last computer had Windows XP and an 80 gb hard drive with 70 gb full - After copying the data only (55 GB) to my new 250 gb hard drive I have only 107 GB remaining of the 222 GB C drive partition. I have not yet added many programs. That tells me that Vista must be using 50-60 GB or more of the drive. Can that be correct?
2. My new computer takes 5-6 minutes to start up. After two minutes I get the welcome screen. Then the monitor goes black for a full two minutes before continuing the startup process. Is this normal for Vista?
3. Occasionally the monitor goes dark for a few seconds and a window pops up saying the display driver has failed but is back. Is this normal?
I certainly gained no speed with this new computer. There are many things I like about Vista. Since I have no previous experience with owning it I am trying to sort out if this computer is a lemon that should be returned or if I should just put up with the downside.
The last couple of days I had a few times a startup error. It said something like Windows couldn't start normally. Run Startup Recovery (Recommended) Start Windows Normally. I did the Startup Recovery and then it worked again but the next day or so the same thing, otherwise my system runs fine.
1 Vista Home Premium 32 PC 1 Vista Home Premium 64 PC
Cisco SD2008 Switch
1 HP 4050 Laserjet (Parallel connected to Vista 32 Machine above)
Configuration of Printer: Connected via parallel to Vista 32 machine Printer is configured for sharing and is installed on both machines test pages print successfully from both machines
Additional notes: During printer setup on the Vista 32 machine, I attempted to install additional 64x drivers, but could not locate them, so I skipped this step.
During printer setup on the Vista 64 machine, the shared printers were identified successfully, and I added the network printer. I was not asked to install drivers the way I have in the past when adding a local printer.
Printing using the shared printer on the local machine Vista 32 performs with normal speeds. Printing from the network computer Vista 64 using the shared printer installed on Vista 32 is extremely slow. Even typing in print job changes in the print dialog window takes 30 seconds or so for each key stroke to register a response onscreen.
I dl'd Mozilla Firefox a day ago, and everything dl'd correctly and completely. But, when I shut down the cpu, it wouldn't start up at all. I did every diagnostic i could let the cpu do, ran a system restore (went all the way back to 10/25/09 restore point). then, i got it to run in safe mode. played with start-up options, and got the desktop to come up in normal mode, but then got error msg 0x800106ba (windows defender won't load), this meant that none of my security stuff loaded either. i ran a chkdisc thing too, and it stopped when looking through file data (stopped at 16%). thus, i am running the cpu in safe mode with networking, and the cpu is running fine. i know this means that there is a file issue. but i am not sure how to find it.
i have begun to notice a particular startup item by the name of MSASCul.exe, now google has been confusing it with MSASCui.exe which turns out to be windows defender, so still somewhat confused i have obtained autoruns and tried a verification on msascul.exe only for autoruns to come back as not verified, googling so far the correct msascul.exe has brought little information up and would hopefully like some verification on if its a genuine executable or some little nasty i need to catch.
Hi, i am trying to use the startup repair function booting from my vista disc. I have set it in BIOS so that it boots from the cd/dvd drive first. I put the disc in and restart and when it comes up saying boot from cd/dvd press any key i do so. The problem is everytime i do that my pc just starts up normally and doesn't load the vista disc so i cannot get on the options and run startup repair.
I had my laptop out for repairs, and when I got it back they had enabled the auto log on at startup. I don't like this because that way anyone could get into my computer when they turn it on.
How do I DIS-able this? I've found plenty of sites that enables it, but I don't want it on. Undoing the checkmark in the place that does it on Vista doesn't seem to do the trick.
I have built up a new system...been running perfectly since August 2008.
2 nights ago I had just finished an update to itunes and some other apple software which required a restart. Upon restart, the system hung while booting.didn't get to the user account log-in screen.it froze with a blackscreen with the mouse cursor sitting there in the middle.
I have done the following things and observed the following behaviour:I have not added any hardware to the system Windows Update has doing automatic updates the systems boots and runs perfectly in safe mode with networking I have reverted to a couple of different restore points prior to installing the apple software...no change I have disabled all non-Microsoft software from starting up via Windows Defender...no change I can get the system to boot to where it displays the user accounts login screen. When I click on an account and enter the password it will hang at that point. Mouse continues to respond but no further response. Disk drive light goes solid but no sound of the disk operating If at the user account log in screen I select to shut the system down it will hang during shutdown checking the event logs shows a range of various fatal errors.I can provide more info on this at later posts if needed but the messages look quite similar to other posts given for a range of different behaviours so I am not sure which if any are relevant. Booting to the Vista CD and doing a repair found no errors. In short, my perfectly happy and functioning system has suddenly gone mental for no obvious reason.
I've just noticed that Defender isn't running, even though the Registry key(HKLMSoftwareMicrosoftWindowsCurrentVersionRun) is there. The path specified by this key (%ProgramFiles%Windows DefenderMSASCui.exe -hide) is valid. I can copy and paste it into a Run box and the process appears in the Task Manager (and stays there until I reboot). If I view the System Startup page in Spybot S&D the key exists. I've actually changed '%ProgramFiles%' to 'C:Program Files' (without the quotes) to see if it makes a difference - it doesn't. If I view the Startups tab in The Ultimate Troubleshooter it finds the key but shows File Not Found in the Launch Command field.I'm at a bit of a loss. I thought perhaps the permissions had got screwed up for either the Windows Defender folder or the executable itself, but if that were the case, should I be able to run the command manually? In any case, the permissions can't be edited. Everything's greyed out.I'm quite happy to run without Defender; I'd just rather be the one who decides. I'm concerned that to all intents and purposes it's supposed to be running but isn't.
Does Vista take as long to startup as everyone. Is using it a satisfying experience or a frustrating one? Does it hang a lot? I need a new computer but am turned off by Vista reviews. I am considering a Mac. Should a take the plunge or not?
Today I was starting up my Custom Vista computer bought of Ebay as usual. The progress bar when starting that goes from left to right froze after liker 3 seconds. I restarted my PC using the button located on the actual computer. Then it prompted me to go into Safe Mode or Normal Mode. I went into normal mode and the same thing happened. I tried to restore my computer to an earlier date, which restored successfully, but it still freezes. I am now in Safe Mode with Networking and dont know how to get to Full Mode without it freezing.
After a long debate with myself, I went ahead and downloaded SP1 for my old system. I had installed a new Logitech camera that was using the Lv? .exe driver or something. Anyway, unplugged the camera and deactivated the Logitech programs in the startup for all users. Installed SP1. Rebooted. Came back after several hours. Re-Attached the USB devices. Everything works. For the moment, I have the Logitech entries still DISABLED in the startup.
as i start my laptop, there this symbol which indicates digitalpersona personal on the lower right hand hand side of the screen that blinks continuously with a wierd pop up noise. It does so for 5-10 mins at the start and then it stops blinking. The voice is so dam irritating that i have to put my laptop on mute.
On start up my laptop dispaly the desktop error message: Could not load or run '""' specified in the registry. Make sure the file exists on your computer or remove the reference to it in the registry. This makes no sense to me at all.
whenevr i start my computer it goes to a black screen that gives me 2 options:
1. fix start-up problams (recommended) -or something like that
2. start windows normally
whenever i choose the 1st option it waits 2 seconds and then goes back to that black screen the secont option- it starts loading windows for a long time (about a minut, a minut and a half) and then it gives me a blue screen that says something about problems (i cant read it, becouys it disappears 2 fast-there are percents running down...) and than goes back 2 tha black screen. i pressed some buttons and then it gave me some options , i chose 2 start windows in a safe mode, but -again!!!!-that damn black SCREEN
again, i pressed some buttons and it gave me the same optionsa and i chose to boot windows in a way that it would give me the last document it faild 2 open or something like that (that's what the description said, anyway...). it gave me another blue screen (after he tried starting windows) that gave me some kinda data path and the said: partitons: 2 and then something in '[ ]' and lower it said: enter=submit. esc=cancel. silly of me, i know, but i pressed enter, and it brought me to a blue screen that said: *** STOP: 0X0000005C ( 0X0000010B,0X00000003, 0X00000000, 0X00000000). i run a searc in google and all the people who had this problem said they first tried 2 install a new windows- but i didnt!!! the computer worked just fine, and then it fell from a height of about 4 feet, but it kept working until my sister closed it and the opened again.
I'm having problems with Vista on my parents office computer, and i'm trying to keep from having to reinstall everything! I've looked all over google trying to find other peeps with the same problem, but I still havn't found a solution. The computer is an HP Pavilion, with Vista Home Premium. While starting up, after the welcome screen, it takes me to my desktop. All I can see is the curser and the background. It's as if explorer.exe will not start.
I can't start explorer.exe, because ctrl,alt,dlt, will not work at all. I've tried this in safe mode also, but it yields the same results. I've also gone into command prompt and checked the regedit to see if the shell or w/e for explorer.exe was screwed up, but everything looks fine there. And regedit is the only thing I have been able to start in command prompt, system restore and explorer.exe will not start from there, well, they will start but they will not display at all. Its like everything is running in the background.
I recently pulled a friend's ASUS G50V running on Windows Vista Home Premium x64 out to try and repair. The notebook itself is about 14 months old, but was only running for about 3 before it began giving him problems. He shelved it and bought a new one, and recently offered it to me if I could get it running..but post 12 month warrenty and lack of startup/backup discs is giving me hell. Anyways, here's what it's doing, and what I've tried so far.
I am trying to run a program at startup that is continually being blocked at startup by the UAC and thus defeats the purpose of doing so. I think I need to change the permissions of the program in order to get this to work, but am not sure of what the correct approach is to doing this. What setting do I need to change and how do I get them to lock in. I am also running this program in XP compatibility mode if that makes a difference. I am the sole user/administrator of this PC.
