I am trying to run a program at startup that is continually being blocked at startup by the UAC and thus defeats the purpose of doing so. I think I need to change the permissions of the program in order to get this to work, but am not sure of what the correct approach is to doing this. What setting do I need to change and how do I get them to lock in. I am also running this program in XP compatibility mode if that makes a difference. I am the sole user/administrator of this PC.
Since installing Vista SP1, windows defender alerts me that it has blocked a startup program. The program it is blocking is by eMPIA technology, Inc, BDA Monitor application, file name hcwemmon.exe. Can anyone tell me if this os okay to permit to run or not? Or even if i need to run it? I'm using vista ulitmate 64.
I have installed BOINC client and Vista blocks it after logon, so I wanted to enable it, but why the hell should I do it? :o It shows as "not yet classified", but the only active buttons are remove and disable! Meanwhile it scans, so shall I wait until it scans whole drive and then it will be active or what should I do to permanently enable this?
I am new in vista. I installed vista ultimate 32bit. after that I used 'msconfig' and removed some startup programs. after that; when I startup the system there is a balloon tip says about removed programes. How I remove the baloon tip for blocked startup programmes ?
I am running Vista 64 and installed a program which apparently had a virus or I got it using IE8. I found an entry in the start up tab that was causing a problem. I went into the registry and deleted the item from the startup tab and I also disabled it in the startup tab. The startup tab still shows the item even though it is disabled and deleted from the registry. Why does it still show in MSCONFIG and how do I delete it from the start up entry
I have just puchased my first Windows Vista computer - an HP laptop. I have purchased at leat five laptops since 2000 so I am familiar with setup and comfortable with installations etc. I have three questions here.
1. My last computer had Windows XP and an 80 gb hard drive with 70 gb full - After copying the data only (55 GB) to my new 250 gb hard drive I have only 107 GB remaining of the 222 GB C drive partition. I have not yet added many programs. That tells me that Vista must be using 50-60 GB or more of the drive. Can that be correct?
2. My new computer takes 5-6 minutes to start up. After two minutes I get the welcome screen. Then the monitor goes black for a full two minutes before continuing the startup process. Is this normal for Vista?
3. Occasionally the monitor goes dark for a few seconds and a window pops up saying the display driver has failed but is back. Is this normal?
I certainly gained no speed with this new computer. There are many things I like about Vista. Since I have no previous experience with owning it I am trying to sort out if this computer is a lemon that should be returned or if I should just put up with the downside.
The last couple of days I had a few times a startup error. It said something like Windows couldn't start normally. Run Startup Recovery (Recommended) Start Windows Normally. I did the Startup Recovery and then it worked again but the next day or so the same thing, otherwise my system runs fine.
My Son's computer was working yesterday and this morning he can't surf using IE 8 or Firefox. It appears Port 80 is being blocked. I have disabled the firewall temporarily and this did not resolve the issue. I did the "netsh winsock reset" and this did not fix the problem. I have reset my router with no change. I am able to ping the DNS, the Default router and his IP address within the command window. I can also ping yahoo.com, google.com within the command window, but can't reach them with either browser. He did not have System Restore enabled, so I can't use that as a solution. Can the group recommend some options for me to try? He is using Vista Home Premium, and a wireless card. I can also see ALL GREEN when I open up the Network Sharing tool. There is a green line between his IP and the Wireless Card and green line between the Wireless Card and the Internet.
I have a program that's supposed to start when I boot into Windows (Vista Home Premium, SP2). However, I get a message that says it's blocked - so, I have to go in and unblock it manually. Is there any way I can set it so it unblocks (or doesn't block at all)
I like to have some advice on my internet connection problems.. when i open up my browser and going to surf a little my connection blocks after a few windows. if i close down my browser, and open up again, it works the same some windows and blocks.
I just installed broadband internet on my HP Pavilion tx2000 notebook PC loaded with Windows Vista Home Premium 32 bit. I have not been able to access any site other than Google and its allies. I have turned off the windows firewall to avoid and conflict with the Norton Antivirus 2009 firewall. I have tried by disabling phising filters. But nothing working.
I live at a college where I'm the administrator on our computer in the common room. The computer is only meant to play music when we have parties and such, so I have made a normal account, besides the administrator account, that people can use. I have blocked all programs except the music program. I wondered if it is possible to block the Realtek program in a way so people can't use it/screw the settings up but so it will still be able to run at startup?
when ever i go to this one specific website it will not come up the screen just says, request cancelled 101. does anyone know how to fix this? i used to be able to go to this website with no problrms at all and now my computer is blocked. i tried different web browsers.
I'm new to Vista but am having problems with Windows Mail. Just realised that I can't receive attachments. I'm forwarding some mail from my desktop using Outlook in XP to my laptop using Vista and 9 times out of 10 attachments aren't being received. They don't show as blocked or anything they're just not there. They are in the sent items on my desktop. I've turned off email scanning in Norton and changed the settings re reading, etc, in windows mail with absolutely no change.
Vista always says "Windows has blocked some start-up programs" when I reboot. So What! It doesn't offer a way to turn them off. How can I get rid of these bad programs, and why are they there? My Avast anti-virus and Ad Aware say I'm clean.
I received a legitimate message with several links in it. When I put the mouse pointer on any of the links a box pops up showing the link but with "blocked:: at the beginning. When I click on the link I get the following error box: "This file does not have a program associated with it for performing this action. Creat an association in the Set Associations control panel". None of this makes any sense. Disabling my antivirus/spyware had no effect, and the same message was ok on another computer.
I have two Acer desktop computers with Vista Business SP1 they both have blocked security permissions on the DVD Drive. There is a crossed out circle on the icon, and I cannot access any discs from the drive (it opens empty). "Access is denied" when I try to access it through the command prompt. In the Security Properties of the drive the Current Owners is "Unable to display current owner". I am unable to add a member or group to the ownership there. Is tells me "Unable to set new owner on DVD RW Drive (E. Access is denied". I'm accessing all this through the built-in Administrator account, and have opened the command prompt as Administrator. *I have been able to get in through Safe Mode in the Administrator account, but still have been unble to find a way to open this up for users and admins.
I login remotely to 3 servers, and if I choose 5 clients. I have full administrator rights. Suddenly, I am not able to remote into Client 01( Windows Vista). Our MS Pro says someone or something has blocked or locked :3389 and he does not know how to either rebuild it or fix it. The client, is a fairly new Dual Core Vista Machine and I was logging into it just fine, until...A major Software program was installed, and certain permissions were accessed (I do not know which ones). Then it blocked me. It is locked or blocked. We can't seem to find the one thing we need to get it back. The permissions pertained to multiple users ,using the same program on our application Server. No one, including the MS Pro would have purposely shut that port down. What I am looking at from my out of town side is: A BRICK. It Says: Connectiveity to the Remote Computer could not be established. Ensure that the remote computer is on and connected to the Small Business Server network.
First of all I am the administrator on this pc. I am trying to download templates from lightscribe and I get the message that admistrator has blocked the download. How can I change the settings to allow this action to take place?
when I go into windows mail the following error message appears: The host 'pop.wanadoo.co.uk' could not be found. Please verify that you have entered the server name correctly. Account: 'pop.wanadoo.co.uk', Server: 'pop.wanadoo.co.uk', Protocol: POP3, Port: 110, Secure(SSL): No, Socket Error: 11001, Error Number: 0x800CCC0D I haven't changed anything recently and don't understand why the account can't be found. Also I can still send emails.Any advice as to what I can do to get my emails back
They had Norton Internet Security 2007 installed and it was really causing more problems than it was solving so I tried to uninstall it and the uninstaller wouldn't finish and Norton's removal tool (the latest downloaded from their website) appears to be broken since it keeps saying that it's expired and won't do anything. So following some instructions I found I manually removed the Norton Program directories and registry entries and reset the winsock lsp settings with "netsh winsock reset". However the Security Center now shows that the Firewall is on but when I go to Control Panel / Windows Firewall it says that the Firewall is off.
The problem is that despite having done all this any program other than Internet Explorer that needs internet access is being blocked. Spybot Search & Destroy is being blocked from downloading updates, FireFox can't access the internet, NOD32 is being blocked from download signature updates, etc.
Ok so i have blocked these sites through this:notepad c:WINDOWSsystem32driversetchosts. and then I think I put a block on top of that so it couldn't be changed but I can't remember. If you think you can help me get the sites back unblocked that would be great.