I had my laptop out for repairs, and when I got it back they had enabled the auto log on at startup. I don't like this because that way anyone could get into my computer when they turn it on.
How do I DIS-able this? I've found plenty of sites that enables it, but I don't want it on. Undoing the checkmark in the place that does it on Vista doesn't seem to do the trick.
I turned off UAC on my parents' new computer a couple days ago. Yesterday, my dad encountered some spyware while browsing (he called me over and I noticed that Firefox had somehow gone to onlinexpscanner.com and downloaded a suspicious executable, and there was a prompt to run the program). I am now trying to figure out if any spyware got installed onto the computer. The first thing I have noticed is that UAC is now enabled, even though I had disabled it a couple days ago. How did that happen? Could any Windows updates have re-enabled it?
View 9 Replies View RelatedAfter re-enabling UAC, 1 of the 4 users cannot login anymore. He types as usual his credentials, the login seems to proceed, but after a few seconds the login screen is back. The user who cannot login anymore, has done updates of Vista. This user is an Administrator.
View 5 Replies View RelatedI own an ASUS CG5290, and it came with an ASUS Rampage II Gene motherboard, an ASUS GTX 260 896mb graphics card, 9 gbs of ram, and an i7 running at 2.66. My video card was acting up so I decided to purchase a BFG GTX 275 896mb GDDR3 and picked up a 900w power supply. Then as I was installed it, I noticed that my PSU said something about being SLI ready and I looke up on to that. Can my computer dual run 2 different cards? An ASUS GTX 260 and a BFG GTX 275?
View 5 Replies View RelatedI just fired up on windows vista with IE 7 after many long years on win95 and 98.
I searched but did not see this exact problem. I was trying to login to my amazon account and it said I needed to enable cookies to get in. Over the course of the next 2 hours I was finally at:
Norton shut off.
Cookies enabled with all amazon sites they listed in as trusted sites.
Cookies cleared and new window opened.
I still got the same error.
Can someone post the regedit for enabling mic boost for vista ultimate x64? I had it before but then reformatted and lost the directions.
View 6 Replies View RelatedI've just installed Beta 2 (5384) and I'm so far very happy with it. All of my hardware is fully functioning even with some of it using XP drivers. I've installed the nVidia drivers 88.61 for my Geforce 6800GT w/ 256MB RAM. After enabling Aero, the graphics are terribly sluggish. I can't drag a window without it jumping around. My resolution is 1680x1050. Is there something I'm missing? I've checked the supported GPU lists and there's tons of cards slower than mine that support Aero. Is this just a stupid list of what will "work" but not what will perform well?
View 6 Replies View RelatedI know about powercfg -h on. It doesn't work. Disk cleanup deleted the hibernation file, now when I put that line in the command prompt it tells me: "Hibernation failed with the following error: Access is denied. The following items are preventing hibernation on this system. The system could not create the hibernation file. The specific error code is 0xc0000022."I am an admin account, running the cmd.exe as an admin. Doing this in safe mode produces a different error which I can post if you want (along the lines of a VGAsave). There are no options in the control panel remotely relating to hibernation. Is there any alternate way to enable hibernation or to get the powercfg tool to work as it is intended?
View 7 Replies View RelatedI just recently bought 3 Western Digital hard drives.
First one is a Western Digital - Caviar GP 1TB Internal SATA Hard Drive
Second is Western Digital Caviar SE16 Internal SATA 320GB Hard Drive
Third is WD Caviar Blue WD400JD - hard drive - 40 GB - SATA-300
my question is do i have to configure the jumpers to enable faster tranfer speeds or are they already maximized by default?
I am running Vista 64 and installed a program which apparently had a virus or I got it using IE8. I found an entry in the start up tab that was causing a problem. I went into the registry and deleted the item from the startup tab and I also disabled it in the startup tab. The startup tab still shows the item even though it is disabled and deleted from the registry. Why does it still show in MSCONFIG and how do I delete it from the start up entry
View 5 Replies View RelatedI have just puchased my first Windows Vista computer - an HP laptop. I have purchased at leat five laptops since 2000 so I am familiar with setup and
comfortable with installations etc. I have three questions here.
1. My last computer had Windows XP and an 80 gb hard drive with 70 gb full - After copying the data only (55 GB) to my new 250 gb hard drive I have only 107 GB remaining of the 222 GB C drive partition. I have not yet added many programs. That tells me that Vista must be using 50-60 GB or more of the drive. Can that be correct?
2. My new computer takes 5-6 minutes to start up. After two minutes I get the welcome screen. Then the monitor goes black for a full two minutes before continuing the startup process. Is this normal for Vista?
3. Occasionally the monitor goes dark for a few seconds and a window pops up saying the display driver has failed but is back. Is this normal?
I certainly gained no speed with this new computer. There are many things I like about Vista. Since I have no previous experience with owning it I am trying to sort out if this computer is a lemon that should be returned or if I should just put up with the downside.
The last couple of days I had a few times a startup error. It said something like Windows couldn't start normally. Run Startup Recovery (Recommended) Start Windows Normally. I did the Startup Recovery and then it worked again but the next day or so the same thing, otherwise my system runs fine.
View 9 Replies View RelatedAfter successfully using Windows calendar for a couple of weeks, a message now pops up saying calendars disabled--further details say access denied. How do I enable?
View 5 Replies View RelatedSome people Running the Windows 7 Pre Beta 6801 have been asking about Windows Mail in Windows seven and where they can find it. The strange thing is it is there but it's hidden and doesn't do anything when you click on it, although you will see it in task manager, so if you do want Windows Mail this is what you have to do. First go to folder options and deselect hide protected operating system files and do not show hidden files, you will now be able to see the Windows Mail executable file which was previously hidden. Next go to your programs folder and Windows Mail folder and take Ownership of all the files in there, you will need to do this one file at a time and Don't Forget to Give Yourself FULL CONTROL of each file. Just in case there is another fix for this in the Future you may want to make a copy of this folder and keep it somewhere Once you have taken ownership and given yourself full control copy all your files from Vista's Windows Mail folder and paste and replace ALL of the files in Windows 7 Mail folder. That's it and DON'T try to click on the Original Hidden WinMail.exe file, if you do you will not be able to replace it, as it will run and you wont see anything but you will still need to kill the process in task manager.
View 9 Replies View RelatedI dl'd Mozilla Firefox a day ago, and everything dl'd correctly and completely. But, when I shut down the cpu, it wouldn't start up at all. I did every diagnostic i could let the cpu do, ran a system restore (went all the way back to 10/25/09 restore point). then, i got it to run in safe mode. played with start-up options, and got the desktop to come up in normal mode, but then got error msg 0x800106ba (windows defender won't load), this meant that none of my security stuff loaded either. i ran a chkdisc thing too, and it stopped when looking through file data (stopped at 16%). thus, i am running the cpu in safe mode with networking, and the cpu is running fine. i know this means that there is a file issue. but i am not sure how to find it.
View 6 Replies View Relatedi have begun to notice a particular startup item by the name of MSASCul.exe, now google has been confusing it with MSASCui.exe which turns out to be windows defender, so still somewhat confused i have obtained autoruns and tried a verification on msascul.exe only for autoruns to come back as not verified, googling so far the correct msascul.exe has brought little information up and would hopefully like some verification on if its a genuine executable or some little nasty i need to catch.
View 9 Replies View RelatedI purchased my system (Laptop, dual core HP Paviolion dv6700) and installed vista home premium in December 2008. In the beginning system's performance was good but now (within 6 months) it starts so slow. What may be the problem.
View 5 Replies View RelatedHi, i am trying to use the startup repair function booting from my vista disc. I have set it in BIOS so that it boots from the cd/dvd drive first. I put the disc in and restart and when it comes up saying boot from cd/dvd press any key i do so. The problem is everytime i do that my pc just starts up normally and doesn't load the vista disc so i cannot get on the options and run startup repair.
View 9 Replies View RelatedI have built up a new system...been running perfectly since August 2008.
2 nights ago I had just finished an update to itunes and some other apple software which required a restart. Upon restart, the system hung while booting.didn't get to the user account log-in screen.it froze with a blackscreen with the mouse cursor sitting there in the middle.
I have done the following things and observed the following behaviour:I have not added any hardware to the system Windows Update has doing automatic updates the systems boots and runs perfectly in safe mode with networking I have reverted to a couple of different restore points prior to installing the apple software...no change I have disabled all non-Microsoft software from starting up via Windows Defender...no change I can get the system to boot to where it displays the user accounts login screen. When I click on an account and enter the password it will hang at that point. Mouse continues to respond but no further response. Disk drive light goes solid but no sound of the disk operating If at the user account log in screen I select to shut the system down it will hang during shutdown checking the event logs shows a range of various fatal errors.I can provide more info on this at later posts if needed but the messages look quite similar to other posts given for a range of different behaviours so I am not sure which if any are relevant. Booting to the Vista CD and doing a repair found no errors. In short, my perfectly happy and functioning system has suddenly gone mental for no obvious reason.
I've just noticed that Defender isn't running, even though the Registry key(HKLMSoftwareMicrosoftWindowsCurrentVersionRun) is there. The path specified by this key (%ProgramFiles%Windows DefenderMSASCui.exe -hide) is valid. I can copy and paste it into a Run box and the process appears in the Task Manager (and stays there until I reboot). If I view the System Startup page in Spybot S&D the key exists. I've actually changed '%ProgramFiles%' to 'C:Program Files' (without the quotes) to see if it makes a difference - it doesn't. If I view the Startups tab in The Ultimate Troubleshooter it
finds the key but shows File Not Found in the Launch Command field.I'm at a bit of a loss. I thought perhaps the permissions had got screwed up for either the Windows Defender folder or the executable itself, but if that were the case, should I be able to run the command manually? In any case, the permissions can't be edited. Everything's greyed out.I'm quite happy to run without Defender; I'd just rather be the one who
decides. I'm concerned that to all intents and purposes it's supposed to be running but isn't.
Does Vista take as long to startup as everyone. Is using it a satisfying experience or a frustrating one? Does it hang a lot? I need a new computer but am turned off by Vista reviews. I am considering a Mac. Should a take the plunge or not?
View 9 Replies View RelatedI was just wondering how I can manage what programs come up/don't come up when I start my computer.
View 5 Replies View RelatedToday I was starting up my Custom Vista computer bought of Ebay as usual. The progress bar when starting that goes from left to right froze after liker 3 seconds. I restarted my PC using the button located on the actual computer. Then it prompted me to go into Safe Mode or Normal Mode. I went into normal mode and the same thing happened. I tried to restore my computer to an earlier date, which restored successfully, but it still freezes. I am now in Safe Mode with Networking and dont know how to get to Full Mode without it freezing.
View 6 Replies View RelatedAfter a long debate with myself, I went ahead and downloaded SP1 for my old system. I had installed a new Logitech camera that was using the Lv? .exe driver or something. Anyway, unplugged the camera and deactivated the Logitech programs in the startup for all users. Installed SP1. Rebooted. Came back after several hours. Re-Attached the USB devices. Everything works. For the moment, I have the Logitech entries still DISABLED in the startup.
View 5 Replies View Relatedas i start my laptop, there this symbol which indicates digitalpersona personal on the lower right hand hand side of the screen that blinks continuously with a wierd pop up noise. It does so for 5-10 mins at the start and then it stops blinking. The voice is so dam irritating that i have to put my laptop on mute.
View 5 Replies View RelatedOn start up my laptop dispaly the desktop error message: Could not load or run '""' specified in the registry. Make sure the file exists on your computer or remove the reference to it in the registry. This makes no sense to me at all.
View 5 Replies View Relatedwhenevr i start my computer it goes to a black screen that gives me 2 options:
1. fix start-up problams (recommended) -or something like that
2. start windows normally
whenever i choose the 1st option it waits 2 seconds and then goes back to that black screen the secont option- it starts loading windows for a long time (about a minut, a minut and a half) and then it gives me a blue screen that says something about problems (i cant read it, becouys it disappears 2 fast-there are percents running down...) and than goes back 2 tha black screen. i pressed some buttons and then it gave me some options , i chose 2 start windows in a safe mode, but -again!!!!-that damn black SCREEN
again, i pressed some buttons and it gave me the same optionsa and i chose to boot windows in a way that it would give me the last document it faild 2 open or something like that (that's what the description said, anyway...). it gave me another blue screen (after he tried starting windows) that gave me some kinda data path and the said: partitons: 2 and then something in '[ ]' and lower it said: enter=submit. esc=cancel. silly of me, i know, but i pressed enter, and it brought me to a blue screen that said: *** STOP: 0X0000005C ( 0X0000010B,0X00000003, 0X00000000, 0X00000000). i run a searc in google and all the people who had this problem said they first tried 2 install a new windows- but i didnt!!! the computer worked just fine, and then it fell from a height of about 4 feet, but it kept working until my sister closed it and the opened again.
Is there a setting to make Windows Mail display the Newsgroups instead of email on startup.
View 5 Replies View RelatedI'm having problems with Vista on my parents office computer, and i'm trying to keep from having to reinstall everything! I've looked all over google trying to find other peeps with the same problem, but I still havn't found a solution. The computer is an HP Pavilion, with Vista Home Premium. While starting up, after the welcome screen, it takes me to my desktop. All I can see is the curser and the background. It's as if explorer.exe will not start.
I can't start explorer.exe, because ctrl,alt,dlt, will not work at all. I've tried this in safe mode also, but it yields the same results. I've also gone into command prompt and checked the regedit to see if the shell or w/e for explorer.exe was screwed up, but everything looks fine there. And regedit is the only thing I have been able to start in command prompt, system restore and explorer.exe will not start from there, well, they will start but they will not display at all. Its like everything is running in the background.
I recently pulled a friend's ASUS G50V running on Windows Vista Home Premium x64 out to try and repair. The notebook itself is about 14 months old, but was only running for about 3 before it began giving him problems. He shelved it and bought a new one, and recently offered it to me if I could get it running..but post 12 month warrenty and lack of startup/backup discs is giving me hell. Anyways, here's what it's doing, and what I've tried so far.
View 5 Replies View RelatedI wanted to know, how do i set this image On Startup What i have is ridiculous, it is a green bar only.
View 6 Replies View Related