Slow Down The System By Adding An Other Firewall
Mar 31, 2008
When I installed my computer I found the standard Windows firewall in Vista premium. I trusted this and did not want to slow down the system by adding an other firewall. Besides, this policy also was discouraged by the helpfiles that came with the system. Virusprotection was not done by the system, so advisable to install a virusprotection tool. I read a lot on the net on that item and finally installed Avast antivirus.
So far so good. Had no troubles from oktober 07 till a week ago. Than I decided to destall Avast and to install One Live one care. The critics did not take me to this. But I think it is a good policy to have the safety issues in the same hand as the system resources are. I take another step and expect the safety cause covered in the system itself. Sell a new car without safety features! I installed the One care, I did want to give it my support, I did not expect it to be bad at all................
View 9 Replies
ADVERTISEMENT
Aug 7, 2009
(not sure ifthis is the right place to post it)but i have zonealarm and i recently (last night) reinstalled Vista also im noticing and tremendous increase in startup time from my pc just by running 1 core not all four! if this is the problem can anyone tell me another really good firewall that doesnt make it startup so slow
View 8 Replies
View Related
Mar 30, 2009
I'd like to do is take a Hard drive out of my old computer (which has a bad MB) and throw it in my new computer. The thing is my old HD had XP Home Premium sp3 on it and new one has Vista Home Premium 64 bit. I want to add to that a Maxtor SATA150 250GB ,8 MB 7200 RPM with XP Home Premium 32 bit SP3. Is there still the boot.ini issue since I'm not really "loading" a new OS but sorta Plugin' one in? Will it boot and give an option on which OS to use? Will Vista "see" the other HDD since stuffs already there? I've read so much on this dual-boot stuff now I'm totally lost.
View 4 Replies
View Related
Jan 9, 2009
First of all, I built my new PC a couple of days back installed vista ultimate 64 which is all good. The new HD is attached to the mother board via a SATA connection. I removed my old XP drive from the old PC and installed it to the new system also however as its quite old I have had to use the IDE connection on the mother board and set the jumpers to slave. I want to be able to access all my old music, photos etc.
Now Vista picks up the old XP drive through “computer” but when I try to access it, it sates I need to reformat the drive which of course I totally want to avoid!
I made sure the (ribbon type) IDE cable is using the correct (grey) slave connection and also made sure the jumper is set to slave. Apparently there is no need to set anything else to master as I’m using SATA connections. The old drive was also previously operational prior to the new build so I know there are no issues there.
View 9 Replies
View Related
Mar 23, 2008
I want some upgradation in my system Such as adding Graphics card, ram. Need some upgradation tips and tell me which components should I add in my system. Remember My budget is only about 200$.
View 9 Replies
View Related
May 19, 2008
I am using Vista ultimate with a new Canon LBP2900I laser printer. If I print with the windows firewall turned on it takes an age ti get a print out, if I turn off the firewall it prints stright away. All the drivers are up to date. In the firewall exceptions the printer is listed and ticked
View 9 Replies
View Related
Mar 25, 2008
Suddenly my pc start to get sloooow. I check with task manager and my ram was at 100% and my cpu was at 100% usage in full power. No open programs no nothing the computer was IDLE.
View 5 Replies
View Related
May 15, 2010
my laptop keeps freezing on me and is very very slow,i've run malwarebytes through it,msse,and spybot,all to no avail,everything is telling me the laptop is clean,by the way i don't keep all three on my laptop at the same time so that isn't the problem,i'm on windows vista 64 bit.
View 7 Replies
View Related
Dec 29, 2009
its a toshiba laptop with vista and its terribly slow.
View 4 Replies
View Related
Oct 5, 2008
After using winrar to extract a large file (1gb+) my computer becomes really slow. The only way to fix it is to restart it which takes about 10 mins! I have noticed in task manager that the Physical Memory is up over 90% after extracting a large file. I never used to have this problem how can I fix it?
View 8 Replies
View Related
Apr 1, 2009
start > programs > accessories > system tools > system restore, or from desktop shortcut created from same entry, When opening system restore, it takes, by the clock, almost 3 minutes to open. Also happens in safe mode. That which I have tried: sfc /scannow
Tested ram with MemTest86 for > 8hr; passed. Tested HDD with HDD [ WD SATA; 160 GB ] diags; passed. I am helping a friend, who said the laptop, HP Pavillion dv6245 was slow. I uninstalled Ad Aware 2008. Now, the only slowness I have been able to uncover is opening the system restore interface.
View 5 Replies
View Related
Feb 9, 2010
i use spybot s&d, and malwarebytes, the free versions on my laptop,it's been playing up lately like very slow at times,i've heard that ms security essentials is compatable with malwarebytes so i was wondering if it might be worth getting rid of spybot and installing ms security,does any body know if i might be doing the right thing,i also have windows defender but i've heard msse automaticly disables this feature and takes over,i'm on windows vista ultimate 64 bit. I've run scan after scan but is still slow
View 5 Replies
View Related
Sep 15, 2009
After installing these two updates: .NET Framework 3.5 Family Update (KB959209) x64 Update to .NET Framework 3.5 Service Pack 1 for the .NET Framework Assistant x64 (KB963707), The performance of my PC drastically slowed down during start-up and running of other processes and programs. I decided to uninstall them; and the performance seemed to be back to normal. My question is: Are these updates really necessary for my PC; do I absolutely need them?
View 7 Replies
View Related
Dec 18, 2009
For some reason when I run my computer from work it runs extremely slow. The the only difference I can see that could be affecting it is that at home I use wifi to connect to the internet. I'm always connected to the internet. At work there is no wifi, and not connected to the internet. Could it be trying to do something online, but since it cant connect, keep trying and trying and trying slowing everything down? To fix it I have to restart it. This seems to do the job, however I'd rather not have to do this every time. At home this never happens. I never have to restart it to get it to move faster. And this happens EVERY TIME at work.
View 4 Replies
View Related
Jan 1, 2009
if it is safe to disable the DEP, Data Execution Prevention??, does having it on slow the system down?
View 6 Replies
View Related
May 29, 2008
i was just installing some extra languages on the ultimate extra update, i just selected all the updates to download as i was in a rush go leave home, it came up to about 5gb, it wasnt a problem because i was going out for about 4 hours. i came back home, download was complete and was installing the language packs, at first i thought it was stuck because computer started to run extra sluggish, but just as i was about to restart computer the bar moved, so i just waited, just doing some browsing etc on this forum, researching and getting tips and tricks etc., despite the fact that it was still running slow..i checked the cpu usage, the cpu was fine, but with suprise, the ram was running about 1.9gb ( i have 2gb ram). first of all, is the language pack suppose to take that long to install? and is it suppose to use that much of the ram?
View 5 Replies
View Related
May 3, 2009
I have Vista 32 bit,intel core2 duo t7250 processor,3gb ram,nvidia 8600m dell xps 1530 laptop. My friend also has ame lappy. His system works perfectly fine, but my system is too slow.There is lag in simple operations also like there in a lag of 1-3 seconds in opening folders,it always takes to load/show all data in the folders. This problem is still persists even after i have disabled all unneccesary stuffs.
View 7 Replies
View Related
Mar 23, 2008
It take minutes to click on anything. I have installed my Motherboard drivers and my GPU drivers to little effect. What is additional steps I can take to speed it up. Is it worth downloading the updates. If I do that it will probably take all afternoon. Plus I'll have to log off this computer.
View 5 Replies
View Related
Nov 13, 2008
A Trojan that Counter Spy has found, I have done 3 full scans and each time this miserable little blighter keeps coming back, and I don't know how else to get shot of it. here is a screenshot of what Counter Spy found, please ignore the Cookies one as I have told it to remove and it was successful, its just the Trojan that keeps coming back on each scan I do. As a sidenote, how do I post a screen of something that shows straight away instead of an attachment that you must click on?
View 6 Replies
View Related
Apr 21, 2009
Windows Vista Basic sp1. Im using a 3rd party firewall program. In Administrative Tools---Services it shows Windows Firewall status as Started. But, in Security Center it shows my 3rd party firewall being On but Windows Firewall being off. Also, in Administrative Tools---Windows Firewall with Advanced Security is showing Windows Firewall being on in Domain Profile. Is this normal? Why would one show Windows Firewall as On and another show it as Off?
View 9 Replies
View Related
Nov 15, 2008
I'm using vista 64 for the last 2 months and it worked quite good in general. Yesterday after downloading some automatic updates (and i don't think this was the cause for what i specify next...) the system started working very slow, with sudden freezes, slow reaction to clicks on icons, starting programs etc. Another annoying issue that the system started booting very slow: after the green marker which shows after booting, there's a very long stop before i get the log on window. What's really strange is that i don't see the harddrive working in this time...it seems like freeze, like the one happens when the windows is up and running.
My system is intel quad q6600 cpu, 4gb 800 mhz memory,gigabye dq6 680i motherboard,and new hitachi sata2 hardrives. Does it sounds more like hardware problem? (till yesterday all was good!)or more like windows problem? (i have a backup of the system from 2 months ago,right after i installed the system, but no more backups and restore points....)
View 9 Replies
View Related
Jul 31, 2008
My problem is when ever i try to launch certain applications it causes an extreme slow down of the system and high cpu usage, after 30+ seconds the system goes back to normal and the program responds fine. Seems to be a bit slow in loading as well. Programs affected include winamp (latest), nero 8, windows media player 11, powerdvd, right clicking on hard drives and opening properties but not accessing the hdd's. Programs which aren't affected include media player classic, open office, ie7, firefox 3, vlc player. I have been messing around with my codecs recently trying to get thumbnail previews of the .avi files on my pc which suceeding in by installing ffdshowx64 so i uninstalled this and the 64bit vista codec pack to no avail. I disabled kaspersky but that was no good either. I also disabled my raid array but that had no effect
View 9 Replies
View Related
Apr 30, 2008
I finally got SP1 for Vista to show up. I am going to run a registry clean up and defrag the hard drive and then install it. If I have problems like I did the last time (SP1 made my system slow to a crawl) then I will scream.
View 9 Replies
View Related
Oct 27, 2009
I am experiencing a general slow down of my Vista system, e.g., 5-30 seconds for applications to load, 5-10 seconds for a new tab to appear in IE8, applications displaying "not responding" while an operation is working such as saving an image or file, etc.
This is isolated to Vista only. I have Windows 7 and XP installed (tri-boot) as well and they do not exhibit this problem. So, I have to conclude it is not hardware related. The system is squeaky clean; full scans with KAV 9.0.0.746 and Malwarebyte's Anti-malware. I've run both Chkdsk and SFC /scannow resulting in no change. Task Manager shows no unusual CPU usage nor Memory usage.
View 7 Replies
View Related
Apr 16, 2008
My firewall gives me this error message when i try to set it on. "Windows cannot start the Windows Firewall service." I have just installed SP1 but the problem started before that.
View 9 Replies
View Related
Apr 12, 2008
My new pc desktop has a place for a second HD. Can I insert the HD from my old pc without losing the os,Win XP, and the programs on it. My idea is to run one HD with Vista and the second with XP. I seem to recal that adding a loaded HD to a different pc could be a problem.
View 5 Replies
View Related
Aug 5, 2008
I partitioned my hard drive, installed Linux, added it to the boot loader and everything was fine.
I updated my Linux kernel and rebooted, but because I hadn't configured the Linux LILO bootloader properly i couldn't boot into anything.
Eventually I managed to uninstall LILO and use the HP Vista Recovery on my laptop to use "bootrec.exe /fixmbr" command which proceeded to restore my default Vista MBR.
Since I used that command, my boot loader comes up with Windows Vista and the HP Recovery of which both work. The problem I'm having now is that I cannot add the Linux partition or any other new OS to my boot loader.
Vistabootpro doesn't have the capabilities to add Linux to the MBR, so I used EasyBCD and set my added a Linux entry EXACTLY how it had worked in my previous MBR, yet when I boot up the entry is just not there.
I then proceeded to use cmd in admin mode and use the bcdedit commands to add the information myself....
View 5 Replies
View Related
Mar 23, 2008
I want to add more RAM. I'm not sure how it all works.. on Circuitcity.com you can enter ur exact comp model number and it finds what ur computer needs.. so I've done that and have decided to get Kingston or the ACP-EP, both are 1GB DDR2, but both are PC2-5300 (667MHz).. Thats what it said to get online.. so my question is:
1. is it ok to mix different brands of RAM,
2. I'm Running Dual Channel, with two 512 Cards is it bad to mix a different kind, size, and speed in the 3rd slot... will it change how the Dual Channel works... I'm not sure how all the RAM stuff works.
View 9 Replies
View Related
Jun 11, 2008
For this purpose, I need to create a list file which can be imported to Getright! I create a text file, rename it to .lst and keep all my URLs in there. I was wondering if it is possible to include .lst file in the Right Click->New menu Other even the Right Click menu would be nice
View 8 Replies
View Related
Dec 25, 2008
i have a couple programs to run on startup and it keeps asking me if it is ok everytime i boot vista 64 is there a way to add them to something so it wont do that any more?
View 4 Replies
View Related
Jan 26, 2010
My current C drive has a corrupt system on it (Vista) It needs to be formated and the system reinstalled. I am considering installing a larger capacity drive as the primary (C) drive , install the system on that and use the current drive as extra storage space while keeping some of the data that is currently on it thus not reformatting it. My question is, when the computer boots will it automatically boot to the new C drive or, as the system will now be on both drives, will it confuse itself?
Also. as my system disk is from from the mfr of the computer, I believe it does not have any of the Vista service packs on it. Once formated with this disk should I then get SP1 and SP2 and install them? In that order I presume or will SP2 alone suffice? Where can I get SP1 and 2?
View 6 Replies
View Related
