I installed a copy of Vista x64 Ultimate to try out on my machine because i have 4Gb of ram and windows XP doesn't recognize it It installed on my AMD Athlon 64 X2 5000+ black edition no problem, but after it downloaded 42 updates i went into a BSOD loop. No matter what i did after that, i could not re-install XP on anyone of the 6 Hd's i had in my system. If i tried... BSOD.
I had no choice but to purchase yet another HD (which i didnt really need) just so i can use that as a singular connected drive to install XP on again.Now then, most of my drives are now unreadable in XP and i get messages like this an error occurred reading folder:the volume does not contain a recognized file system. please make sure that all required file system drivers are loaded and that the volume is not corrupted (1005) I have even tried connecting said drives to USB/Firewire external enclosures to see if i can access files that way. If i have lost over 2Tb of data on these drives just for installing vista, i will be looking for someone at MS to assassinate please tell me there is a viable solution to this
I have a Asus K8V-MX/S motherboard and it is nearly impossible to find bios updates for it with an old 20 gb ide hdd and a new tb samsung sata hdd. Currently the 20 gb has my vista home premium on it and is close to being full and I can't load in additional programs like office etc.. I have been not been able to load vista directly to the sata because vista won't recognize the drive because it is attached to a sata pci controller because my mb can't find the hdd either.
I have tried several cloning programs to get the vista cloned on to the new sata but that has turned out to be unsuccessful. I remember one program, XXClone, telling me that ntldr and netdetect.com files couldn't be found to make it bootable. What options do I have at this point?
I have a ATI Radeon All-In-Wonder 2006 with HDTV built in running a X1300 GPU and 256 GDDR2 memory.. The graphics card works fine, but Vista neither recognizes the TV Tuner nor do I think ATI will support it since AMD bought them out.. AMD is being very vague on AIW or any TV Tuner support. I'm curious what Microsoft will do to support the full functions of mass marketed hardware such as the All-In Wonder TV Tuner Graphics cards?
In November I upgraded my system with Vista Ultimate. When it was returned to me I followed each prompt and did everything during installation it asked of me. Now 5 months later is states that I need to validate. I guess whatever was running on my system was temporary. Does anyone know that if I purchase a new product key this will solve my issue or do I have to purchase a full version? If I do have to purchase a full version can it be installed over my already installed and running vista on my system?
I upgrade my notebook to Vista and the video drive automatic installed by Vista is RADEON XPRESS 200M (WDDM), version 7.14.10.8333. When I try to install the version 8.5 (from the ATI site) nothing happens. If I force to install the new drive, Vista Update still inform the best drive is the older, and the CCC (Catalyst control center) still not installed.
I use an external esata enclosure. When I plug it into my laptop, Vista Ultimate x64 recognises the hotplugging and sees the drive right away, and handles it fine when I switch off. I have a Vista Ultimate x64 desktop using a motherboard without a built esata port. The enclosure came with an esata adapter plate that internally connects to a sata port on the motherboard. This works, but only if I boot the PC up with the external drive switched on first. If I switch it on later, Vista doesn't see it. I understood that sata eand esata were both hot pluggable, so I'm not sure why this is not working. Does the motherboard need a esata port to work with a esata based external hdd enclosure (to allow hotplug capability). I can purchase a PCI express card that provides an esata port, but I don't know if thats going to make a difference.
I have run Windows XP on my system since 2004. I have been running 2GB of system RAM through 4x512 Corsair valueselect memory sticks. I attempted to install Vista Business on Monday and the system would never get to the point where it would ask to create the user account without going into a reboot loop that I couldn't get out of (even in safe mode). After removing and replacing hardware, the only thing that would solve the problem was to remove 2 of the 512 sticks and leaving the RAM at 1GB. Now after vista is installed, I can't put the RAM back without having the reboot loop return. Does know how I can get Vista to recognize my other 1GB without getting all mad and throwing a temper tantrum?....
A kind soul kindly sent me this script which gives an audible alert when a chat window opens on my PC.
It doesn't work on VISTA any ideas as to what needs to be changed?
set shell=createobject("wscript.shell") while NOT shell.appactivate("Private Chat") wscript.sleep 2000 wend shell.run "c:/windows/media/tada.wav" wscript.quit
I turned on "Toggle Keys" in Control PanelEase of Access CenterMake the keyboard easier to use. It is supposed to cause a beep when you press the Caps Lock, Num Lock, or Scroll Lock keys. It worked great in XP, but it doesn't work in Vista.
Yesterday I removed my ATI Radeon X800Pro card because it caused graphics issues. I rebooted the computer and it automatically switched to the nvidia GeForce 6100 GPU onboard graphics. It had a fairly updated Windows driver installed for it. I went to nvidia to download the newest driver. During the installation of that driver, the screen went blank. I waited 5 minutes and nothing happened. I restarted my pc and now it doesn't show the Vista log-in screen anymore. All I get is that little green bar on the bottom and then the screen turns black. All I can see is a tiny little green strip (of the log-in page) on the top of my screen. How can I fix that? I still got XP, which I am using right now. I tried to boot Vista in Safe mode but it got stuck while it was loading the drivers...
My new computer (Vista) is wired to a wireless router. While the router sees all other connections to the network, Vista doesn't recognize ANY computer (1 on XP, 1 a MacBook and 1 a wireless game system). How do I get Vista to recognize the other computers on the network? Previous XP computer saw and allowed sharing without issue, so not a hardware problem I'm thinking, as the new computer/Vista is the only change to the system.
I have been wanting to address this problem for some time now but I have always felt that it is going to be difficult to understand and solve. Maybe, maybe not. I just looked at some of the previous FAQs on this subject and I don't fully understand their fixes. One fix tells me to go to change the Indexing somehow by disabling it. But when I go there, that box is inactive and cannot be changed apparently. So before I go further and not know what I am doing, I decided to post and ask for help. To illustrate my problem, let's say I am trying to find a file in my Downloads folder. I open my Downloads folder and can see the file I want. Yet when I do a Search for that file, the Search cannot locate it. It is as if the file doesn't exist. But I am looking right at it in Downloads!
I don't yet know how deep this problem goes, i.e. what if my file I wanted was a .dll file or something deep in the computer and I couldn't find it? Is the fix to this problem simply to disable Indexing? Or is there something more sinister going on with Search not being able to find anything?
For those having issues with itunes and ipod syncing while running vista 64 bit you must get the new itunes 64 bit version. This can be installed over the old Itunes. search itunes 64 on apples website. If this doesnt work then try to find your solution somewhere else
Can anyone tell me the best and easiest way to re-install Vista which was pre-installed on my PC when purchased. I'd like to re-install because of performance problems. I have the business edition.
At the moment it runs XP pro (Very well i might add!) but my friend insists on wanting Vista ultimate installed instead. I have shown him the rig with XP running but he is not convinced! So before he rushes out and buys a copy, i would like to get some "Real world" opinions on vista ultimate on this hardware. (just so i dont get a ear full of abuse if its slow as a snail!)
I was sent a win7 CD by a vauchure given with my Qompack laptop. If anybody did this upgrade, how is it done please, scared in case I mess Vista for which I have no CD.
I've been having a problem since I installed Vista on my laptop. I had to manually install some drivers and I don't know if I installed them all correctly. Anyway, I've been having this error/bluescreen:..........
I have a Toshiba X505-Q830 and it came with Windows 7-64 bit, I play Counter-Strike competitively and the mouse acceleration could not be removed which completely ruined my ability to play the game. So I popped in my copy of Windows Vista-64 bit and formatted and installed. Now my laptop is without the proper drivers for the internet and I have searched high and low for them but nothing is working.
using an old DOS program that worked under XP, but doesn't appear to work properly in Vista. When I execute the program, it comes up with the error message "This system does not support fullscreen mode. Choose 'Close' to terminate the application." My choices then are "Close" or "Ignore". Whichever option I click on, the program will then run, but in a miniscule window that I can't alter. how to get this to run in fullscreen like it did before? I'm working on getting him to join the 21st century, but in the interim, I'd like to make this work...at least temporarily.
I have a Sony VAIO that came with Vista Premium installed. I have installed a few programs on it and have had varrying problems. My most recent problem is having a "demo" version of a software which I then purchased and attempted to apply the license to it. It says it has to reboot to make changes, but when it restarts it is still in the demo mode. No changes made. By itself it would seem that it is a problem with the software. But, I have another program (Ikea Kitchen Builder 08) that when installed accesses removed and deleted files from a previous install version of it as well (Ikea kitchen builder 07). Both of these programs install and work perfectly on Windows XP. But for some stupid reason Vista doesn't allow these programs to successfuly install themselves.
I connected a HP Deskjet 670C to a laptop (Vista), using a USB to Parallel Converter. I downloaded the driver (Windows XP - Vista doesn't exist) for the printer and installed the driver that came with the cable. I can't print.
I like the CPU speed control in Power-->Advaanced settings, with precision to 1%. We've always had it in IBm Thinkpads, since IBm sold it to China which rebranded it as Lenovo, I switched to American HP. Regular Windows, not taylored by IBM, was never aware of Thinkpads unique internals. Now with Vista it doesn't matter, i can control processor and I CAN SEE & HEAR RESULTS! Suppose fan is blowing and my hand can feel warm air flowing from vents, I tested it several times when I switch from CPU 100% to 25%, fan slows down stops, air gets cooler, and fan is often stopped which gives me some peace in temrs of reliability. A hot computer is bound to sustain permanent damage, heat is the biggest killer of electronics. So I switch to 100% when running CAD & Graphics/Video apps, 25% when writing articles, 10% when reading/browsign plain text, of course I don't annoy myself by clicking switches and playign with this instead of real work.
But still i appreciate this control, because I my profession is electroncis-related I just like this type of clock frequency control. IBM also provided us with automatic CPU, automatic PCI bus or fixed PCI bus frequency, optical drive turn-off time in addiiton to harddisk timer found for real techies who get deep into hardware, we don't have that in Vista but I don't care. I have a real quiet laptop now despite its gigantic 17inch display and hardware meant for hard-core CAD, Graphics & Gaming, you don't alway sneed processor toiling hard in summer heat, only asking for potential fan damage-->CPU damage, so thsi control is nice....
i have problem with HP Deskjet 450 under Vista Home Premium. Printer is installed by Vista, everything looks ok, but i can't print. When i want to print Test page, only row of 2-20 smilies is coming out in best case and print job shows error . When i ask HP, they say Microsoft is responsible for drivers. Microsoft says i should ask HP. I slowly begin to be annoyed. Have bought short certified hi-speed USB 2.0 cable. Windows update shows that there is optional update for Other hardware - dj450 USB, dowloaded and it says it is not possible to install, error code: 80070103. Under Win XP are no problems. Is there any solution aside from buying new printer or downgrade to XP?Is there a way to install this update
My PC has two hard drives. Windows gave me the option on boot up of proceeding with either Windows XP or Windows Vista home basic which worked fine. I then Ultimate 32 bit over the XP installation and again all seemed ok. However, the other morning I switched on the pc and got the dreaded Bootmgr is missing message. I have tried fixing using the vista disc but when it says select the OS to repair nothing is showing. If i click next and then choose the repair option it goes through the process and then you reboot but the problem still remains. I have also tried the command prompt options but they make no difference either. The Bios recognises both my hard drives are there ok.
i just installed windows vista, then when i went to try to get a new theme, i realized i dont have aero, no glass, no cool window flip thingy (windows key + tab). I have vista 32bit home premium, and an ATI Radeon X1250 [acer P221Wx].
