i have a windows vista home premium in my laptop. i have created a zip file and in which i am trying to create a password so that no one can open it. but i am unable to find out of how to create a password in windows vista.
View 9 RepliesI have created a task to start my Folding@Home client when the computer starts (the SMP client won't run as a service yet). The FAH client needs to run as admin, so I checked the "Run with highest privileges" box, enabled the option to run whether user is logged in or not and entered my user and password when prompted. If I run the task manually it starts and runs correctly.
When the computer is restarted, the client does not start and an error message is waiting in Task Scheduler as follows:Event ID: 101 OP Code: 6619136 Error Value: 2147943726When initially setting this up, I remember the error message saying something about a bad username/password. That isn't in the Task Scheduler history though. If I open the task and simply resave it (changing nothing, but entering username/password again), the task will start manually. This is so close, but very frustrating that such a simple task won't quite work.
here,and do to my recent act of stupidity i question if im new to pcs!I just bought a new hp laptop and for some reason i decided during the set up to create a new password a long one.And now i cant get on my pc.If this is a stupid question im sorry.If laughter is a product of reading this post,which would be expected of me if i were you,it is understandable.oviously point out i have vista.
View 3 Replies View RelatedI had tried to move a file from another folder to my desktop. File move was taking forever and I had cancelled out. But it created a file on my desktop which is corrupted and the original file is corrupted (neither will open). I cannot delete this file from my desktop or other location now and it has seemed to slow down my PC. When I try to delete, I get a popup box that says "Recycling 1 item... from Desktop, Discovered 0 items (0 bytes)" and it just stays in an neverending do loop. After looking on internet, I have seen that Vista has issues deleting or even moving files.
View 4 Replies View RelatedMy elderly Mother's Vista PC isn't working, and as she relies on this for shopping etc I need to get it working (I am several hundred miles from her). The PC tried to install the latest Vista updates (20/2/2008) but upon restart she gets the message "Windows failed to restart - a recent hardware/software change may be the cause - File windowssystem32winload.exe "The selected file could not be loaded". She doesn't have a start in "normal mode" option. I have walked her through trying system repair/restore using the Vista installation Cd, but after trying to restore she gets the message; "system restore failed due to an unspecified error; "cannot create a file when that file already exists" (0x800700b7) We have tried 3 different restore points with the same result.
View 9 Replies View RelatedCould anyone explain to me why I cannot (for instance) create an ISO image file in C: I get an error message: "Unable to create or replace file Reason: A required privilege is not held by the client"
View 4 Replies View RelatedI am running Vista Home Premium on an Acer stationary Aspire M3100. All running well except for one problem. I as a user can not install two specific programms. My wife and another user on the PC got the programms when I installed them, but I (admin.) cannot get them working. One is a programm for my Navigon GPS called NavigonFresh. I get two error messages: "Unable to create directory" and: "Cannot create file navigonavigon freshsettingsuser.xml". But as mentioned above the two other users on the machine have no problems!
The other one is my EPSON perfection scanner 1250. I installed it on the PC, but I can not use/open the programm - but the two other users on the machine have no problems! These are the only two programms on the PC giving me troubles. I tried to uninstall and reinstall but with same negative results. (I tried asking on my Danish newsgroup but negative).
I'm trying to create a batch file so that I can bring up 2 sites at one time when I open my browser. I use Firefox & IE8. What I have done so far to no avail is created a file as follows and sent to desktop from notepad named test.bat:
without parenthesis in the above. I can get these to open consecutively, same browser window if I have a browser already open. But, not without browser open. How do I connect the 2 sites to open in 2 tabs, same window? I also added them as multi home pages, then sent shortcut to browser to desktop. This does work, but, not what I want.
Is there anyway to create a batch file and have these 2 sites open at start up, by-passing the desktop without clicking to open the browser? Also, I know that clicking on the shortcut to the browser that's on the desktop does slow down the launching process. If there is another way upon start up, will it be slower as well?
I just bought a new Lenovo 3000N200 laptop which came with Vista Home Premium preinstalled. I connected it wirelessly to my home network. The other PCs in this network are wired to the same ASUS wireless router and run WinXP.
All the machines are in the same workgroup. The network profile of my Vista laptop is "Private".
Everything works fine until I enable password protected sharing (file sharing ON, public folder sharing ON, password protected sharing ON) and reboot the machine. I mention the system is working as expected until reboot.
After each reboot, I find both the file sharing and public folder sharing set to OFF. Of course, the shared folders are not accessible via network. I can set the two options back to ON and everything works fine again, but this is unacceptably annoying!
If password protected sharing is set to OFF, file and folder sharing keep their ON state even after reboot. But I want the protected sharing - it fits my needs like a glove!
Windows Vista includes a great little utility that allows users to finally make soft and hard file system links in the file system. This can be very useful from a software compatibility standpoint as well as a great way to organize your computer. Unlike a shortcut, a link is at the file system level and can be used to create an alias for a file or folder that is in a different location. For example, you can create a hard link (Directory junction) called c:win that points to c:windowssystem32. After the link is created, you can open up command prompt or explorer and browse to c:win and you will see the contents of c:windowssystem32. This is not a new technology, it has actually been a core Linux and Unix feature for as far as I can remember but it is nice to finally have it in Windows Vista....
View 0 Replies View RelatedI am running Windows Vista Home Premium 32 (system specs: laptop 2.1 Ghz core 2 duo, 4 gb RAM, 500gb hd (about half full) nvidia 8400M GS, Avira Premium Security Suite). I have had the computer for about a year running fine with 1 main admin account. Now when I need to create an account for another user I cannot create one, either admin or standard. When I create it, using either the control panel or command prompt, it creates the user picture, making the account visible on the control panel user accounts screen, and on logon screen. However, when trying to log into the new account I am greeted with the error "User profile service failed on logon. User profile cannot be loaded." The standard fix for this from various forums is to edit the registry key of the account. However, on going to regedit I see that no key even exists for the account. On further investigation I discover that no user files have been created either. I attempted a system restore, but discovered that all my past restore points were gone, and intruigingly, the computer had stopped createing 24 hour checkpoints. I cannot say for definite whether it was this issue or another one that caused system restore to mess up, as I don't check my system restore all that often. Either way, system restore is not an option. There have been mentions of a full Vista reinstall, though if at all possible I would like to avoid this.
View 9 Replies View RelatedI am having problems with creating shortcuts on my desktop. when i select send to desktop (create shortcut) it comes up with the error. Windows could create the shortcut. Check to see if the disc is full.I have over 180 GB free space left. To get things to the desktop i can drag it into the tab section next to the start icon, and then drag onto desktop.But when i do this i am always required to give permission and it creates two desktop icons.i have been having problems with my catalyst control centre but i dont think they are related.
View 9 Replies View RelatedWhen I install Vista, it wants to force me to create a local account, and it won't let me create one called Administrator, becuase the name is already used (thus the Administrator account exists). I don't want to create some dummy account just just to log in to join the domain. How do I get past the "Choose a user name and picture" screen and log in as Administrator so I can just install the network drivers and join my domain?
View 4 Replies View RelatedI have Vista x64 and I have read threads on this for weeks and can't fix it. I have file sharing/network discovery on, private network, password protection disabled, my shares set to everyone and everyone is on the same workgroup. My problem is that the x64 Vista computer will not see any of the XP (x86 or x64) computers and they can't see it from the Network Neighbourhood. However, if I type the IP address of the XP computers I
can access them. On the XP computers if I type the IP address I get an error that it isn't accessable and I might not have permission. However, if I type \192.168.0.100share or any of the other share names I access it just fine. pinging works too by IP but not by name. If I boot into the x86 install of have of Vista I can access XP computers from Vista and the Vista from XP by name and everything without typing any user names. The only differince between the two aside from x64 and x86 is that x86 isn't patched past SP1 as I don't use it often. Lastly after installing that XP patch I can see the x86 XP computers by name from the network map feature on Vista, still can't access them by name though...
Network of two computers, a desktop running vista home premium and a laptop running vista basic. I am the only user on each of the computers, my user account name is the same on both computers and I don't need a password to log on. File sharing is 'on', password protected sharing is 'off', and I have shared the 'documents' folder on both machines
When I view my network I see both computers "PAUL-PC" and PAUL-LAPTOP", when I select the one I'm not working on I see "Users", "Documents" and "Printers". When I select "Documents" I see "\PAUL-LAPTOPDocuments is not accessible. You might not have permission to use this network resource....... etc."
I have Vista Home Premium on an Acer Laptop and all was fine until I decided to change my user password. I had or have (who knows now at this stage) an Administrator,User and HDD password installed on my machine. I went into my setup and changed my user password from set to clear but left my other passwords at set. when I exited and saved changes and rebooted I could not get back in with any and all passwords. To make things worse I cannot boot from cd either. It goes to press <F2> go to setup , Enter Current Password: ? then Invalad password I have tried the F10, F12, Del, F5, F8 keys and nothing seems to get past that login screen. Does anyone have any inexpensive suggestions on how I can get into this computer, or how I can get to a command prompt. Can I un-solder the internal Battery and then re attach it.
View 9 Replies View RelatedMy friend at work forgot his password and cannot log onto his computer. He is running Windows vista home premium on a Compaq laptop. We tried to go into the safe mode but the only screen we get is his password sign on screen. Even during boot we pressed f8 key but the password screen came up. He is hoping someone has an idea or answer so he can avoid taking it into get looked at and paying money.
View 9 Replies View RelatedI have been trying to figure out how to create a task in Task Scheduler.
I would like my machine to create a restore point daily. I am ok until the
Actions dialog.
Quote: When you create a task, you must specify the action that will occur when your task starts. Am I correct in assuming that I can create a task that will create a restore point
on a daily schedule for me?
As y'all are aware it wants me to specify the name of the program I want it to run.
I have no idea of the name of the program that creates restore points.
And I have no idea where to find the name.
I have been using this tutorial but I need the name of the program.
Task Scheduler - Create Task
My problem with IE8 is that when I create a new tab I can't see the thumbnails. All I see is three green lines with options under them. The lines are:
Reopen closed tabs
Browse with InPrivate
Use an Accelerator
What shall I do to restore the thmbnails?
After a month or two honeymoon with my new computer last summer, Windows Vista quit letting me create new file folders!!! This is really, really annoying, needless to say.
The other thing is that Windows Vista crashed this weekend and lost some of my files - and the start menu quit working. I think some of the indexes got screwed up or something. I don't know what brought this on except that we had a couple of power failures - and the machine doesn't seem to run chkdsk automatically on restart. If I started the machine and walked away and didn't see the prompt, then I've been using a 'dirty disk' for a week or two and it finally crashed. Or I also installed wireless networking. Also Windows Update downloads automatically and could have downloaded something incompatible with my software. So who knows what might have caused this .I couldn't restore either - now if I ask for Windows restore, it comes up
with an error message.I've been using DOS and windows machines for 20 years and I've never had this happen to me before. I've always had virus checkers and been conscientious about backing up my data.
I am trying to create a shortcut to c:Program FilesMozilla KompozerKompoZer 0.7.10kompozer.exe The window within which you create shortcuts says that this file does not exist! I am looking at that file! I have opened "command prompt" and cd to that subdirectory. question: Am I trying to fight UAC? I am *certain* that my spelling is correct.
View 8 Replies View RelatedI have a set of files saved on a hard drive which were copied from a video DVD. Is there a way to burn a DVD out of these files so that the DVD can be played by an ordinary DVD player?
View 6 Replies View RelatedI am unable to find anything resembling a Fax Account setup on my Windows Vista Home Premium machine. I have search the Web extensively to try and resolve this issue, but have had no luck. Everybody says you need to go to "Scan and Fax", under All Programs. My problem is that I have no such menu option anywhere.
View 5 Replies View RelatedI have vista business 64x on a standalone pc. Since i have installed SP1 task scheduler and event viewer are not working anymore. Message: MMC could not create the snap-in I've tried about everything what i found in google, and what possible to try. Registered dll's, checked security, installed sp2, verifyed .net. No way to get it worked. I have only one admin account on the PC with full rights of course.
View 5 Replies View RelatedI installed Vista SP1 and the group policy management now will not load. I get "MMC could not create the snap-in".
View 4 Replies View RelatedSet up a VPN on my laptop 2 moths ago and it worked fine. Today I cannot find it. Its gone from Connect To and its not in Manager Network Connections. I cant create a new one with the same name because the computer tells me it exists and if I create a new connection it does not appear anywhere either.
View 4 Replies View RelatedI followed the instructions in the mail help for creating a group but there is no way this works. I have Vista Home Basic.
View 4 Replies View RelatedIs it possible to create one DVD with several slideshows which can be chosen from the menu, or is it just one slideshow per DVD?
View 4 Replies View RelatedI cannot create a sub-folder: I am told it already exist but it does not. I checked everything that can be checked in Windows Mail. How do I solve this ?
View 4 Replies View RelatedI have a sony vaio vgn fw21m laptop with vista home premium 32. Each time i try to create a new network connection (connect to the internet - bradband(pppoe)I enter the Username and Password) i get: "The wizard cannot create the connection". I was searching the forums over and over and I cant find nothing useful. There is no problem with my ISP (optical) (on an other laptop runing winXP I can connect with no problems). The funny thing is that I was able to connect to this ISP with no problems, but I lost the conection shortcut after a vista system restore (there was a keyboard problem, no biggy). I also can connect to another ISP (on another location) that does not require a login/password I just have to eneble the right profile. What I can deduct is, that it is probably a problem directly connectet to vista network and sharing center. I alredy reinstaled the ethrnet driver and vaio smart network.
View 4 Replies View Relatedi was wondering how do i create a network ive got only so far but my printer says its offline and i cant use it,my router/modem dose not have a USB port so i have to connect it through another computer through cat5 cable to a router then wireless to my laptop and other 4 computers i know its posssible and you dont need to buy stuff to do it but how do i do it? im looking for instructions and a detailed diagram also any home network secerts
View 4 Replies View Related