I am new to this forum, but need some advice on the disk defragmenter. I tried to defragment the disk last night and left it on all night. In the morning, the disk defragmenter 'still' says... this may take a few minutes to a few hours. The disk defragmenter is ususally on a schedule which is every wednesday, but I am beginning to think it has never been defragmented. How do I defragement the disk in this situation... and hopefully rectify the automatic scheduled defragementation.
disk defragmenter not running has been told it actually is running in the background, well mine isn't! I open disk defragmenter from the options menu and get the screen and it tells me that performance could be improved by defragmenting, so I click the defragment now button, select the drive I want defragmented and then okay. The screen says defragmenting for about 3 seconds (with the spinning wheel going) and then the prompt returns to what it originally said. I've looked in the system monitor and defrag is not running! What can I do to get disk defragmenter to run? I know I can install a third party defragmenter but that is only a way around the problem, not a solution for the problem.
Is it normal for Disk Defragmenter to Analyze the disk AFTER it defragments? I know it does it before and then I click 'Defrag Now' and it proceeds to defrag my hard drive. But today I was watching it and noticed that all of a sudden it stopped defragmenting and the info changed to 'Analyzing disk...'.
i am writing after i have just installed the new service pack 2 for windows vista and am just trying to suggest that with the disk defragmenter, as there isnt a lot that has been changed like the only things that have been changed are that you can now select volums to defrag. one thing that may help with this is to put a small graph (or GUI) similar to the windows xp one on it and maybe a timer if possible so that people know how long it is going to roughly be until it finishes, and a report message say as again in the previous version telling what amount of fragmentation there is and what files are fragmented. also another thing that i have noticed with vista is that it takes up a lot of memory and if possible would there be any chance of trying to make sure that vista uses less memory so that it can be more responsive. These sugestions are from over the internet that people would like to see
This post is a suggestion for Microsoft, and Microsoft responds to the suggestions with the most votes. To vote for this suggestion, click the "I Agree" button in the message pane. If you do not see the button, follow this link to open the suggestion in the Microsoft Web-based Newsreader and then click "I Agree" in the message pane.
For some strange reason my disk defragmenter has stopped working! I run it as usual from the start menu, it requests permission to continue, which I give, and then nothing happens! I've done a search and several others seem to have this problem as well, but no one's provided a sollution!
One of my disappointments in Vista was lack of control over the defragmenting of individual disks/volumes and Microsoft must have been listening to someone! The Disk Defragmenter after SP1 now has a button to "Select Volumes" which can be used to select individual volumes for defragmenting or to remove disks from the automatic defragmenting schedule! I am very happy with that change. It probably was working fine before but I like having the control of my computer to deselect massive hard drives that contain media files transferred from other drives after recording and to only have my (C: system) and (G: recording drive) defragmented automatically.
Disk defragmenter seems to only show options for *when* to defragment. How can I access options of *which* disks I can choose to defragment, and see information as to how fragmented they are initially, so as to determine whether I want to defragment them in the first place?
I can set when I want Disk Defragmenter to run and what partitions to defrag. And I check the box to run automatically and with that window either closed (okay) or left open and it indicating that the drives will be defraged NOTHING happens and when I open up the window it still says what time it will be defraged next even though that time has passed and it says NEVER for when it was last done. Any way to straighten this out? Since MS chose to make defraging progress an unknown I really don't like running it while attended--unless I just go off and do something else. Does _anyone_ ID this and know how to get it fixed?
Vista's defragmenter has been on my computer since Vista was installed, but recently I tried to defragment my drive, and got a message saying the program wasn't installed. I think the first time I noticed its absence was right after I replaced my hard drive. The instructions for installing it don't make any sense, looking more like XP instructions than Vista. how I can find and reinstall the Vista defragmenter?
Where is disc defrag? Can I find it with window explorer? Can I see, like I did with XP, a graph, what it's gonna do and see how the progress is going? or do I just have to watch the little ring going around and hope all is well with no idea if it will "take from a few minutes or a few hours"?
I ran a defragmenting session last night to clear up some space, and for some reason my C drive has dropped from 33.1 GB to 29.1. This has happened to me once before, but the other two recent defragments I've ran cleared up a ton of space. I honestly have no idea where the other three GBs have gone and I have not downloaded anything. I run a disk cleanup every night.
Last week I bought a new Acer Aspire 6350 w/ Vista - My 1st Vista machine. After uninstalling all the Acer bloatware, I open the GUI defragger, it analyzes C: for 2 secs (doesn't even mention analyzing the other 2 partitions) then it says "your file system performance can be improved". I defrag it the C:, it takes 45 mins or so and done. I go to my wife's Dell Vista laptop and go to the GUI defragger. It analyzes all 3 of her partitions. Weird, mine only analyzed C: for 2 secs. I then go back to my new Acer and run the GUI degragmenter again. After a 2 sec C: analysis it says "your file system......." again. Then when I go the command line defrag, run "defrag c: -a" it says I don't need to defrag. Bottom line is the GUI defragmenter doesn't work on this new laptop. It doesn't scan all partitions, when started it runs for a bit, then it just stops and it goes back to saying " your file system performance can be improved".
Check disk will not run at startup. Runs in read only mode without a problem. Have tried sfc /scannow. Have replaced autochk file. Have tried from elevated prompt, drive c: properties, as well as in safe mode. Tried Vista x64.com tutorial methods.
Lenovo R61 T8300 duo processor 2 gb ram 100 gb, 7200 rpm hard drive 4gb readyboost Windows Vista Business SP 1 not installed.
when I go into Disk Management, my interal hard drive, external USB harddrive (Western Digital) and Disk Drive are all unreadable. I am certain it was fine when I first installed Vista as I formatted and partitioned both the internal and external HD. I have tried rescanning and resetting my computer, both to no avail. It is interesting to note that Memory Diagnostic Tool doesn't seem to want to work either...Microsoft only suggested rescanning and resetting, so I'm at a bit of a loss as to what to do.
I bought an Acer Aspire 6530 last week. I noticed whenever I go to the GUI disk defragmenter (My Computer>Right click C:>Properties>Tools>Degfragmentation) that it ALWAYS says I need to defrag the drive even after I did did one. But when I do the command line defrag (Start>All Programs>Accessories, says I don't need to. This happens everytime even after I run the defragmenter. So why does the GUI one says I need to while the command line one says I dont. Isnt the GUI and Command Line one basically the same?
I have disc defragmenter to run at a certain time, say I am away from my pc and my screen saver comes on does it still work? as in run disc defrag still?
I can't play any games on my laptop, because for some reason my drive isn't working. I have Windows Vista but I don't have a disk because it was already on my laptop when I got it. I went to my drives to view what was going on and I get this message: Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39) I don't know what this is and I have never seen it before. The drive Optiarc CD-RW CRX880A ATA Device it has the picture of the drive and for some odd reason there's a caution sign on it.
I have lots of bad sectors and not even able to do a restore to a previous restore point. I tried chkdsk/f but on restart it doesn't do the chkdsk. I have a Vista repair disk and I ran the repair but I still have the sector errors that prevent going to the previous restore point.
When I run the windows disk defraggmentor or an independant third party version, my windows vista home premium computer keeps freezing. How can this be fixed?
I have 2 hard disk drives: Seagate 1000GB 7200.11 32MB Western Digital 150GB 10KRPM 16MB and two days ago, the Seagate hard drive isnt being recognized/seen by the computer. I have an Asus P5Q3 Deluxe mother board. A week before this problem I was getting alot of BSOD's and freezes, turned out to be faulty RAM, but added this in case it might help. I have never had this problem before... I unplugged and replugged the hard drive, and switched a cord that links it to the motherboard. I have also tried putting the cord into a different SATA port but it didnt work, I didnt try a diff power cord yet, but I will see if it works or not and post it PS - I'm not very computer technical or w/e, but
I just reformated and noticed that it took Vista an average of 12 seconds for the boot screen to finish loading (I didn't count before or after that, just from when I see the green bar to when it finishes). After installing PerfectDisk 10 and doing an entire disk defragmentation, the time stayed about the same. But when I did a boot time defragment of my system files, the loading time for the boot screen actually increased to 40 seconds! I've rebooted about 5 times to measure the times and I've gotten up to 60 seconds as well!Has anyone else who uses PerfectDisk had similar experience? Did the boot time get better over time or did it stay the same? Also, in the program settings, it asks me whether I want PerfectDisk to manage my layout.ini file or if I want Windows to handle them; does anyone know which is preferred?
I have four (4) hard disks C: D: E: F: all are connected with sata cable and power cable.(of course) The F: is outside from the pc and connected via external SATA and power cable (like usb NOT usb) I know,with USB external hard disk i can use the safely remove option.
Is there any option to safely remove SATA hard disk without Shut Down the pc?
1) Start-Control Panel-Device Manager-Disk Drives-Right Click on hard disk-Properties-Policies-UntikDisable the Enable write cashing on the disk??
2) Start-Control Panel-Device Manager-Disk Drives-Right Click on hard disk-Disable??
i was messing around with virtual disk programs and made 2 disk drives that are not really there. I can't seem to be able to delete them and its really getting annoying. How can i do this?
Is this normal? My disk cleanup shown me a 257GB of files to delete on my 80GB disk. I haven't local network and no external disk. I am using vista home premium with sp1, but this problem was without sp1 too. I attached link (for better understanding) to picture of cleanup.
I am a relatively unexperienced windows vista user using windows home premium at 32 bit on an acer aspire 6920 notebook. I noticed that occassionaly my disk space would drop dramatically without me doing anything. 100s of mbs would just disappear for no reason, so probably being stupid i decided to run the disk fragmenter to try and fix the problem. BUT to my horror i was shocked to find that the disk fragmenter began to eat up my hard disk space big style. I went from 79.7GB to 72.5GB in just over an hour. What the hell happened and can it be fixed? can i get my disk space back? i thought the disk fragmenter was supposed to help your computer not rob it. does anyone else have this problem and can someone please help me? im kinda desparate, i cant believe it.
My Disk is split into 2 partitions, Vista (C: ) and Data (E, each is about 70 Gb. I do not use the Data partition. I want to delete it and allow Vista(C to use all 140 Gb. The Help pages suggest that if I delete (or reduce the size of) "Data", the free space becomes unallocated? Can I repartition the disk to allow Vista C: to acces all 140 Gb?
When I try to open a disk, the driver ejects it and it says please insert a disk into drive. I tried uninstalling and installing the CD RW DRIVER, but it still doesn't work.
I need to replace my wife's motherboard, and I am trying to minimize the amount of change. She is currently running XP, but the hardware is old enough that I cannot simply swap the MBs, because a new board will need a different HAL. I was thinking about installing XP and migrating applications. I was wondering what would happen if I cloned her disk to a SATA disk and installed a Vista upgrade on top of the XP disk. I would run setup and provide the appropriate drivers at the F6 prompt. She has used Vista on occasion when we are out-of-town. I have a separate userID on my laptop that is configured to look as much as possible like XP. The question is whether a Vista upgrade would work on top of an XP image that used a lot of older hardware.
