System Freezed: Disk Defraggmentor Not Working
Apr 13, 2009When I run the windows disk defraggmentor or an independant third party version, my windows vista home premium computer keeps freezing. How can this be fixed?
View 7 Replies
ADVERTISEMENT
System Freezed
May 27, 2009I normally put my laptop to sleep. I shut it down every so often update everything when I can. this morning I shut it down when I got up I started it up passed the laptop to my mate and before i'd turned it on at the plug she said the mouse wasn't moving. so I turned it off. when I turned it back on it booted normally loaded normal and then I just couldn't click anything. it's like i'm just moving the mouse and not clicking any buttons. so I turned it off when it's like this it doesn't sleep. it doesn't respond it's like it's frozen but it hasn't if I boot it up in safe mode things work completely fine probably because only important system files are loaded and nothing else. i'm in safe mode with network so I could get on here what could be the cause of all this happening?
View 4 Replies View RelatedSp2 Update: System Freezed
May 27, 2009I noticed that sp2 for vista is out so I went to windows upgrade site and downloaded/installed sp2. So the computer is rebooting afterwards and my computer died, kinda. What I saw after the post was a trouble screen that told me I had a problem. At the top it said there was a problem that may have been caused by either new hardware or software recently installed. It said I should select from the menu below to fix the trouble.
View 4 Replies View RelatedSystem Disk Automatically Bumped Disk O Position
Sep 21, 2009I have an HP DV7 notebook that I recently added a second SATA 500 GB hard drive in the expansion bay. The purpose of the drive is to serve as a data drive. I also intend to store an image of my system disk on this internal expansion drive so that I can restore my system and apps when I am in the field. For most purposes the drive seems to be functioning normally. However, I recently noticed that, without my instructions, HP Updates were installing suipport files on my expansion disk rather than on my system disk and I have become concerned that Windows Updates may also end up on the expansion drive (so far they appear not to have done this). On further inspection in Computer Management - Disk Managment I discovered that when I put the expansion drive into the 2nd bay, my original system disk was automatically bumped from the Disk 0 position to the Disk 1 position and my expansion disk became the new Disk 0.
In Computer Managment - Disk Management the system currently looks like
Disk 0 - F: Expansion Drive - Healthy, Primary Partition
Disk 1 - C: - Healthy, System, Boot, Page File, Active, Crash Dump,Primary Partition.
If I physically pull out the F: drive from the machine the C: drive returns to the Disk 0 position. I am concerned that my system and application updates are going to get splattered across two drives when I want them to remain on the original C: drive. I can find no way in BIOS or Computer Management - Disk Management to assign the Disk and physically swapping the drives makes the system disk unbootable. Am I at risk of splattering my Window updates across two drives? Should I instruct Vista to regard my system disk C: as Disk 0 and how to I do this?
Chkdsk Freezed
Feb 29, 2008DD has a HP Pavilion dv2000. Last week it starting saying that chkdsk needed to run on start up (there might be a problem). At first it ran to 4% and then stopped - appears to freeze. She left it running all night and then brought it to me. I let run over 5 hours.
View 4 Replies View RelatedSafely Remove Hardware Freezed
Apr 23, 2008When trying to safely remove a SanDisk Cruzer 2GB flash drive on my new laptop, it does not stop the device. Actually, nothing happens. The icon does appear in the taskbar, but it just doesn't do anything.
When trying to remove it via windows explorer, explorer freezes and has to be restarted.
When shutting down or restarting Vista with the USB device still attached it freezes. In safe mode, the device does stop after using "safely remove hardware" and I get this message that it has been stopped. Is this a problem of Vista or is it my new laptop?
Can 'cache' The System Disk In A RAM Disk?
Feb 17, 2008I've persuaded my boss that I need 16 gig of RAM. The purpose being, of course, to make Vista fly. Is a RAM disk the best way to do this? Can I 'cache' the system disk in a RAM disk? Or is there a better way to make use of my new endownment.
View 6 Replies View RelatedDisk Boot Failure "INSERT SYSTEM DISK AND PRESS ENTER"
May 9, 2009I changed the Boot sequence to CD first, then HDD. Everything ran fine and vista seemingly loaded perfectly. After moving some files from my backup drive back onto my main one and installing some drivers, I was asked to restart my computer (for the drivers) so I did. Remembering that the boot sequence was still set on CD first, and since my driver CD was still in the drive, I decided to set the boot sequence back to the way I had it with XP: HDD and then CD. After doing this I quit BIOS and tried to boot, but I kept getting a message saying: DISK BOOT FAILURE. INSERT SYSTEM DISK AND PRESS ENTER.
So I restarted the computer again, this time with my Vista CD in the drive, and again, the computer wouldn't boot and told me to enter a boot disk. Not knowing what to do, I went back into BIOS and changed the boot sequence back to CD first, then HD. After doing this, and restarting with the Vista CD in the drive, my computer booted up with no problems whatsoever. I tried reinstalling Vista (twice), reformatting the target hard drive, changing the boot sequence around, pretty much everything I could think of......
System Restore, System Protection Settings Has Stopped Working
May 3, 2009Not sure why but when I try to open system restore I get this message: "System Protection Settings has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." I cannot make or restore my computer. If I go into system protection I get this error: C:WindowsSystem32SYSDM.CPL is either not designed to run on Windows or it contains an error. Try installing the program again using the original media or contact your system administrator or the software vendor for support.
View 9 Replies View RelatedSystem Is Out Of Disk Space
Aug 17, 2009I wanted a fast drive, so I bought a solid state drive. But I'm a poor college student and so got the 64GB one, which only has 58GB of space (because Lenovo put something on a separate partition which they say I cannot get rid of). The only thing installed is WinVist and MS Office 2007 (and McAfee and other progrms that came with the PC which weren't taking up much space).
Those two programs took up 30GB of space. Yesterday, some Windows backup thing started to run and said "There isn't enough room on this drive to do the backup, do you want to do it anyway? (I'm paraphrasing)". Since I like having things backed up, I said Yes anyway (and to see what happened). Now I have 1 GB free on my drive. Lenovo won't help me with Windows because that's "a configuration issue" and they don't do that. How do I get rid of this backup and get at least 20GB back? Then, how can I configure Windows and Office to take up less disk space?
It seems like Lenovo sold me a PC with a disk drive that doesn't have enough space to operate correctly. And they won't help me resolve the problem. Also, it seems that it is not as easy to separate your data in WinVista as magazine articles would have you believe. I tried configuring it so my "Documents" was on another external drive, but that proved too difficult.
Invalid System Disk?
Aug 24, 2009Recently I started getting a black screeen with "Invalid system disk...Replace the disk, and then press any key" error at startup.
What could that mean? And when I just press a key, it starts up normally. Everytime my laptop boots, that error comes up, and I press a random key, and everything runs normally again.?
System Won't Read The Disk
Jun 23, 2009I have a slight problem with my CD/DVD drive. Every so often when I load a disk a get no response from autoplay. When I open My Computer, I find that the drive letter has changed from E to F for no apparent reason. I've gone into the Computer Management file and changed the letter back to E, but the system still won't read the disk. I get the application back in service by running a system restore, but I'm just wondering if anybody knows why this problem pops up. Is it just one of those ghost glitches that float around in Vista? It's not a big deal, but it's annoying.
View 4 Replies View RelatedSystem Mis-reporting Disk Usage
Jul 4, 2008I am using Windows Vista (32-bit) on my computer. Lately, I have noticed that the reported "used space" on my hard drive (via right-click/properties) keeps rising dramatically while I add very little to my computer. I then made sure that I had turned on options to show system files and hidden OS files so that I could add up the used space. What I found is that all of the files on my computer added together total 44.2 GB, while the usual right-click on the C-drive (selecting Properties) reports that I have used 65.2 GB. I re-checked the math and the folders and still come up with a 21 GB difference - almost 1.5 times the size of what the files/folders add up to.
View 9 Replies View RelatedOS: Recognize The System Recovery Disk?
Apr 3, 2008What are the basic differences between XP & Vista? All we do is surf the web, email and download an occasional game. Norton AntiVirus is always on and always up-to-date. My XP machine is dying big time & I can't figure out how to save it. It won't recognize the System Recovery disk that came with the machine, but it will recognize other CDs. That CD must be bent or whatever. The SPs are up to date. I'm running Office XP and it is taking Word and Excel 7 or 8 seconds to load; it used to open in a snap. I installed the latest edition of Firefox and loading web pages with it is taking too long. Most pages should just snap open. I guessed we've been "phished" or whatever because some of the ads I run into know that I live in Seattle. Our network connection is DSL and we haven't made any changes of any consequence that I know of to this machine in ages. I put SpyBot on it a week ago and twice when WinXP started, the Spybot folder opened. Not the program but the folder.
View 9 Replies View RelatedCan I Download A Copy Of My System Disk
Apr 27, 2008I have misplaced my Vista operating system disk, am I able to download a copy of it from Micosoft website. I have the product key, as it is printed on the rear of the CPU.
View 9 Replies View RelatedHDD - Disk Management And File System
May 15, 2010I just installed a new Hitachi HDD and restored my disc image to it. My original disk had three partitions, the pqservice partition, the active OS partition (C drive) and a data partition (D drive). But I only chose to restore the OS and the data partitions. Now when I view the new disk via disk management, the labeling of the active partition is unusual; there is no volume name listed nor file system, and the free space is shown as 100%. Also, the status shows an EISA configuration. However, under explorer properties for the drive, things look a bit different, with the label and system type correct. What is causing the discrepancy and how to remedy it?I just now also noticed that I no longer have 4gb of ram... I haven't removed anything, but only 2gb are showing in system properties and in the BIOS???
View 7 Replies View RelatedSystem Disk Not Allocated Space Properly
May 12, 2008I was wondering why my new Vista system would only hold eight restore points. I recently used up that space very quickly when I instaled a bunch of my old programs that I used in XP. Turns out that my Vista restore points are about TWO GIGS EACH, compared to 200MB beach in my old XP system. By default, Vista appears to allocate a maximum size of 15% of the drive's total space for restore points. Or it might be a fixed number, I'm not sure. On my system disk, it's currently a tad over 16 gigs. That much space would've stored 80 restore points in XP! To change that space allocation requires some command line hoop jumping, rather than just moving a slider in the GUI.
View 9 Replies View RelatedExternal Usb Disk Drive: Reboot System?
Oct 31, 2009I have Windows Vista, and I like to make my external usb hard disk stay at D: drive even after I reboot the system.
View 5 Replies View RelatedBoot Disk / System Recovery Failure
Mar 19, 2009I run vista 32 bit. I'm pretty sure it's Vista personal (PC didn't actually come with a Vista disk). I only use it for music and games,basic stuff. It's a Compaq....It shat itself recently, it wouldn't boot, so i borrowed the Vista Business disk from my dad to repair it/disk boot, and it worked fine, that was a couple days ago. Today it happened again, except it won't repair the same way. I start it up, it goes to the Compaq startup screen with 4 options; [Esc] Boot menu, [F9] Diagnostics, [F10] Setup, [F11] System recovery. Except I can never go to the diagnostics or system recovery menus, i press the keys and nothing happens. Then when i don't press anything it goes to a black screen with "Disk boot failure, insert system disk and press enter", so i do. Then it says "Windows is loading files" with a white bar below, once that's done it goes to the Microsoft Coporation green load bar that scrolls across over and over. Then it suddenly stops for a few minutes and a blue screen appears saying
"A problem has been detected and Windows has shut down to prevent damage to your computer DRIVER_IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps: Check to see if any new hardware or software is properly installed. If this is a new installation ask your hardware or software manufacturer for any windows updates you might need. If problems continue disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to disable or remove coponents, restart your computer, press F8 to select advanced startup options, then select safe mode. (pressing F8 does nothing for me) TECHNICAL INFORMATION *** STOP: 0x000000D1 (0x00000000, 0x00000002, 0x00000000, 0x87995395) *** nvstor.sys - Adress 87995395 base at 87991000, Datestamp 46671a61".....
System Restore Hard Disk Trashing
Mar 20, 2009I just got a brand new Vista x64 desktop PC today, and I've been spending all day getting everything installed and properly set up. I just can't decide what to do with the system restore feature though. In the Windows scheduler I've blocked it from running after system startup, settling for a supposed once a day restore point creation.
Unfortunately that's not really how things work in the real world - I feel like I can't do a damn thing without Vista deciding it had better spend yet another ten minutes creating a new restore point. Obviously a lot of that is due to all the day one application installs I've been doing, but even on my previous Vista PC (a laptop), I would usually see several restore point creations every day through what constitutes normal PC use for me...........
Check Disk Not Working
May 5, 2008Check disk will not run at startup. Runs in read only mode without a problem. Have tried sfc /scannow. Have replaced autochk file. Have tried from elevated prompt, drive c: properties, as well as in safe mode. Tried Vista x64.com tutorial methods.
Lenovo R61
T8300 duo processor
2 gb ram
100 gb, 7200 rpm hard drive
4gb readyboost
Windows Vista Business
SP 1 not installed.
Disk Defragmenter ACTUALLY NOT WORKING
Mar 23, 2008disk defragmenter not running has been told it actually is running in the background, well mine isn't! I open disk defragmenter from the options menu and get the screen and it tells me that performance could be improved by defragmenting, so I click the defragment now button, select the drive I want defragmented and then okay. The screen says defragmenting for about 3 seconds (with the spinning wheel going) and then the prompt returns to what it originally said. I've looked in the system monitor and defrag is not running! What can I do to get disk defragmenter to run? I know I can install a third party defragmenter but that is only a way around the problem, not a solution for the problem.
View 9 Replies View RelatedDisk Management Not Working?
Jul 29, 2009when I go into Disk Management, my interal hard drive, external USB harddrive (Western Digital) and Disk Drive are all unreadable. I am certain it was fine when I first installed Vista as I formatted and partitioned both the internal and external HD. I have tried rescanning and resetting my computer, both to no avail. It is interesting to note that Memory Diagnostic Tool doesn't seem to want to work either...Microsoft only suggested rescanning and resetting, so I'm at a bit of a loss as to what to do.
View 8 Replies View RelatedDisk Defragmenter Not Working?
May 26, 2008I am new to this forum, but need some advice on the disk defragmenter. I tried to defragment the disk last night and left it on all night. In the morning, the disk defragmenter 'still' says... this may take a few minutes to a few hours. The disk defragmenter is ususally on a schedule which is every wednesday, but I am beginning to think it has never been defragmented. How do I defragement the disk in this situation... and hopefully rectify the automatic scheduled defragementation.
View 6 Replies View RelatedInvalid System Disk Error And Network Drives Is Off
Mar 23, 2008We have the Microsoft corporate program where you get the products to use through the enterprise. I have been trying to setup a test machine with the 64 bit version of Vista so burned the ISO we created for safge keeping off of one of our network drives. Disc seemingly gets created without issue however when I place it in the DVD drive and choose boot from CD/DVD I get the invalid system disk error just after it says this.
View 5 Replies View RelatedDisk Drive Wont Working
Mar 23, 2008I can't play any games on my laptop, because for some reason my drive isn't working. I have Windows Vista but I don't have a disk because it was already on my laptop when I got it. I went to my drives to view what was going on and I get this message: Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39) I don't know what this is and I have never seen it before. The drive Optiarc CD-RW CRX880A ATA Device it has the picture of the drive and for some odd reason there's a caution sign on it.
View 9 Replies View RelatedVista Repair Disk Not Working
May 14, 2008I have lots of bad sectors and not even able to do a restore to a previous restore point. I tried chkdsk/f but on restart it doesn't do the chkdsk. I have a Vista repair disk and I ran the repair but I still have the sector errors that prevent going to the previous restore point.
View 8 Replies View RelatedSystem Restore Disk, Cannot Boot Into Window Or Safe Mode
Jan 30, 2010I am trying to use a system restore disk for my friend's computer that I downloaded. The computer have Vista, now I have a 32 bit and 64 bit disc. How can I find out which version of Vista I have? I cannot boot into window or safe mode ( I could figure it out from there). I also tried to check the Bios and saw nothing. The laptop only has 2 gigs of RAM I think, so I would assume 32 Bit, but I want to be sure. Also, if I used the wrong one, would it mess up the computer? or could I just redo it with the other CD?
View 5 Replies View RelatedNeed To Create System Startup Disk To Upgrade Bios Software
Apr 28, 2008I need to create a system startup disk to upgrade my system bios. How do I do this?
View 6 Replies View RelatedOperating System Unknown Local Disk Woundn't Boot
Feb 6, 2010I'm running Vista Ultimate 64 on a 500 Gig hard drive with 3 partitions.The problem is I marked one of the partitions,not Drive C, as "active" by mistake.I done a Command Prompt to make it "inactive", but when I started the system up again it wouldn't boot.I used the Vista disk for the recovery process, but I got a message "Operating system unknown on (unknown) local disk" i tried fixing the problem with a command prompt "bootrec/fix boot" ,but nothing happened.When I look at the info in Command Prompt it doesn't show the disk partitions, just Disk 0.Also I can't repair because no Disks are listed to be repaired. If I look at the drive in "My Computer" it is full with a file system marked as "Raw" and it wants me to format the drive.I used "Recover My Files" software and it shows some of the documents that are on the drive, but doesn't show any recovery.I looked at some internet post about the message I got and partition and boot problems like I have, but at this point I don't to try any else to make it worse.I would do a reinstall ,but on one of the drives I have some stuff that wasn't backed up.I never thought about backing it up because it wasn't on the C drive.
View 6 Replies View RelatedRun Vista Disk Cleanup System Archived Windows Error
Aug 16, 2008When I run Windows Vista's Disk Cleanup program, I get this list of "Files to delete" window listing showing Downloaded Program Files, Temporary Internet Files, Recycle Bin...and one that is really BIG. It reads "Per user queued Windows Error Repo..." I can't expand the window to read it all. The size is 104GB! (as in Gigabytes). There is also a couple of other files with similar names : per user archived Windows Error Repo...System archived Windows Error Repo..., System queued Windows Error Repo..., My question is can I delete these files safely so I can reclaim some disk space without messing up anything?
View 8 Replies View Related