i've been looking for a way to extend the space on my C drive and came across this forum and after reading some posts i thought great i can delete D drive and put the 52gb in to C drive but then came across this. Which is what i have in my disk management! I went through the initial steps of this tutorial and found that the first volume listed in Computer Management is a "Disk 0" or perhaps Disk capital-oh O. Its status displays as Simple Basic Healthy (EISA Configuration) What is this thing? The overall readout for the computer's harddrive? Do I need to be worried about it if I want to delete the D: partition? It's a 120GB harddrive, with 51.14GB on C: and 50.89 on D:, yet 9.76GB on this mysterious Disk 0. I'd like to merge all three into one C:.
i have a sony vaio with preloaded vista i deleted all the accounts on it and started new ones so things like skype, live messenger and itunes i tryed things like ZapMessenger but it just keeps freezing and if i try going into programmes and uninstalling it but it says finish install/uninstalling what you are doing.
I am Using Vista Ultimate 64. I would like to tranfer my entire drive incuding all files and the Operating system From my current IDE HDD to a new SATA Drive of the sames size (500 Gig) I need the IDE Drive for an older computer ( The 40 Gig IBM Deathstar still functions great, but all programs seem more bloated these Days)
Anyway I went to Administrative Tools and Formated the New Drive NFTS with no Drive Letter. But I cannot get it recognized as a transfer device when I go to system backup. Can I use 'C' on the second and soon to be only drive? If I have to use E or F for now can I change it back later. would that affect the file system? I intend to Low level Format the IDE and try cloning the old machine's XP Drive (32 bit) to it in the second place.
I'm running Vista on a PC that has a hd that has been formated into 3 discrete drives.Vista is loaded onto the C drive, programmes are loaded onto the d drive while i have my data stored on my E drive. By default any documents I save are directed towards My Documents on the C drive - how I go about changing that so the default is my Documents on the E drive?
when booting up from a vista cd I accidentally had my usb external hard drive plugged in and the drive has been emptied and replaced by windows there are sintimental photos etc on the drive can anyone help me to restore them
i just bought My Book Essential 1 TB today... and when i got home i plug it and it works just fine but its bothering me that the HDD type is FAT32 .. so i format it and try to change it to NTFS.. but somethings happen and boom the electric in my apartment was down... and so when the electric back i want to format it again but i can't... there drive is detected but with no space detail... it says "Windows can't format Drive H: - Check to see that the disk and drive are connected properly, make sure that the disk is not read-only, and then try again.
For more information, search Help for read-only files and how to change them" when i open the Disk Management from (My COmputer > Manage) it seems it's already a volume.. but the weird thing there is no space detail.. and i cant erase the volume ... i've tried using diskpart but i can't do nothing because there is no volume and i can't erase the disk... no luck with fsutil cause its not ntfs... I havent tried 3rd party software and i havent tried it on other computer (don't have other computer right now) and WDC didnt give live cd for formatting because all of them was in the drive... though i already redownload it but the program is useless..
I was wonder if anyone know a solution for the following problem. I have a ethernet hard drive and I've never had a problem until using vista and windows server 2008. both operating systems are unable to browse the drive, instead it completely crashes explorer.exe. Windows server 2003 & XP have never had trouble.
Before I remove a USB thumb drive, I click the green check from notification area; I click the message that appears next to the green check, Safely remove USB Mass Storage Device - drives (F:, G; then a dialog box appears that states, This device can now be safely removed from computer.
The light on the thumb drive, however, stays lighted. I previously followed a procedure where the light would go off on the thumb drive when I did a Safely Remove.
Should the light on the thumb drive go off before it can be safely removed? If so, how do I get the thumdrive light to go off?
With the advent of terabyte hard drives, is there a work around for the limitatation of 26 letters for drive designations. I have a new computer with 2 terabyte hard drives, two DVD's, several USB connections, and I am running three different programs from ISO files stored on the hard drive with Daemon Tools, all of which take up drive letters. I have Windows Vista Home Premium, but see no work around for this limitation. I have searched Microsoft KB finding nothing addressing this issue. I am hoping that some one knows of a work around for the problem
i bought a kit for an old hard drive. i got it to work once ealier today, and now it doesn't work. when i plug it into the usb, it will not successfully install. the kit is a rocketfish hd 35, the hard drive is seagate u8 model st313021a. the "remove hardware" icon appears in the tray, but no designated lettered drive appears on the computer.
the hard drive was part of an older tower that i couldn't get to boot. it's strange because just today i accessed the hard drive and located old pictures, music and other files that i hadn't seen in a few years. had i known this would have happened i would have started saving right away. i thought i had it working.
I've upgraded my machine at some point in the last year, where I added a new 500GB drive and moved my C: partition across to it. The previous 250GB drive was left in for additional storage. Just recently (while upgrading my BIOS) I realised that my system was still booting from the 250GB drive even though Windows was on the other disk. There is a fair possibility in the not too distant future that I'll replace the 250GB disk with a larger disk, in which case I won't be able to boot. Is there a safe and reliable way to change it so that the system boots from the 500GB disk?
I have just put a new ide dvd-rewriter into my computer and my computer doesn't recognize the new dvd drive or an existing cd drive. I cant see them in 'My Computer' or the 'device manager'. I don't no if this has anything to do with it but at the same time I also installed a new TV tuner into the computer and now I cant run the CD to fully install it.
I recently fresh installed my Vista Premium x86 on my homebuilt, and I had all my data backed up on my flash. When I plug it in, Vista dings like normal, but it is not in Windows Explorer and Disk Management. The Drive did have some Code 10 Device Cannot Start problems, but those are worked out when I disabled it and re-installed the driver, and the drive DOES show up in 'Safely Remove Hardware' and the Device Manager. I kinda diagnosed that it doesnt have a Drive Letter assigned, due to the flash drive working in my XP x64 dual-boot.
I was starting my computer today (that has Vista), and during the start up process, a black screen came up stating that there was an error opening up my external hard drive and it was checking for errors. After it finally booted up, I went to open the hard drive files, and it was totally BLANK! I then restarted the computer, and still the hard drive is EMPTY! I had ALL my important files in there!
The ONLY thing that looks promising is that when I go to Start then to Computer, it shows the hard drive there, and it still shows that 43GB are free of 111GB of storage (same info shows by right clicking on it and going to Properties). Why would it show this if nothing is on the hard drive anymore? Is there ANYWAY to recover these files again you think???? I NEED those files!!!! Remember that the hard drive STILL PHYSICALLY WORKS. It's just that I cannot access the files on my pc at the time for some reason.......
I want to shrink the C Drive (Vista Drive). Actually 111GB is free out of 236GB on the C Drive but I am only about to Shrink 6GB and even when I try to Shrink the Drive by 6GB I get an error. I want to create a new partition on my hard-disk. These are the screen shots:
I just bought and installed a external hard drive. I am fairly knowlegable about computers but this is my first Ex. Hard drive and know very little about there use. So what I want to know is how to save my Family Tree Makers files to it. And once I do that how do I know for sure it is opening from my new drive and not my computer C: drive? I saved it to a DVD one time but when the time came when I needed it all that was there was a short cut but no files.
A few days back I had posted about an eSATA data drive I had been using with XP not being readable with Vista or Win7. I removed the drive from the enclosure and tried another SATA drive. (both drives are made by Western Digital). the second drive was removed from a Win2k machine when it started developing bad clusters. Vista and Win7 could read that with no problem. so at least I now know the problem is not due to the enclosure itself
Also can conclude that the problem has nothing to do with Win7 not being able to read older versions of NTFS. (Reads a win2k drive with no problems) and for any who had missed the previous post:
Win7 and Vista can run CHKDSK on the drive and read it find ....and find *no* problems
but disc management sees the drive as "RAW"
trying to read the drive from Windows Explorer gives me the error message that the drive is not formatted or the file system is corrupt
I am experiencing some interesting problems with an optical drive on a Lenovo T61p laptop running Vista Business x86 SP1. The problem is that the DVD drive will not auto play and while it recognizes that a disc is in the drive and the files on the disc, it does not recognize any executables even though they are there.
I am shying away from it being a hardware issue due to the fact that I have swapped the drive out with a known working drive and it does the same thing. And the oddest thing about it is that when a disc is in the drive a little apple pops up in the lower left hand corner of the DVD icon in My Computer:
I have an MSI K9NSLI Platinum motherboard with a brand new Seagate ST3250410AS 250GB SATA drive attached as the third master drive. The primary master has an old school ATAPI DVDRW. Keep in mind there is no way I can change a setting in the BIOS (or I don't know how to do it) so that the SATA device is the primary master drive, so these are permanent settings; the primary master and slave drives connect to the IDE connector on my mobo. Now, I?ve tried and tried and tried, but I can?t do a clean install nor an upgrade of Windows Vista Home Premium x86 (from DVD) on that SATA drive when it is hooked up alone (as the third master drive)...........
I have an MSI K9NSLI Platinum motherboard with a brand new Seagate ST3250410AS 250GB SATA drive attached as the third master drive. The primary master has an old school ATAPI DVDRW. Keep in mind there is no way I can change a setting in the BIOS (or I don't know how to do it) so that the SATA device is the primary master drive, so these are permanent settings; the primary master and slave drives connect to the IDE connector on my mobo. Now, I?ve tried and tried and tried, but I can?t do a clean install nor an upgrade of Windows Vista Home Premium x86 (from DVD) on that SATA drive when it is hooked up alone (as the third master drive).
But here?s the kicker. If I plug in my old regular ATA IDE drive as the primary master drive, the DVDRW as the primary slave, and leave the SATA drive as the third master drive, I can install Vista with no problems onto the SATA drive. I just have to leave my old regular ATA IDE drive plugged in as the primary master. If I try to disconnect my old regular ATA IDE drive but leave the SATA drive plugged in by itself, Windows Vista won?t boot.
What is the deal here? How come I can have the SATA by itself as the third master and install WINDOWS XP with no problems and have a workable system, but VISTA doesn?t install. I just paid over $250 for Vista and I have to use this kind of setup to get Windows Vista to work on a SATA drive by itself? This is lame. I want to take that old IDE hard drive out of the box.
Here are my install screens:
First screen: ?Windows is loading files.? bar goes to 100% and the screen advances
Second screen: Black screen with moving green bar and Copyright Microsoft Corporation on bottom. The green bar just keeps moving on forever and doesn?t go to the next screen (which would be the colorful ?Install Windows? dialog box where you choose the language, time/currency, and keyboard, etc.)
I just used Windows Vista to back up my drive to an external drive. It said the backup was successful but when I went to safely remove hardware, I got this message: " Windows can't stop your Generic volume device because it is in use. Close any programs or windows that might be using the device, and then try again later. "I made sure everything was closed, checked with Task Manager and tried again. Same message. After 20 minutes, I finally just disconnected it.
Installing vista x64 took 3 days (unbelievable really!) - and clearly had problems reading / extracting the files from the DVD drive. Vista works completely fine now (normal speed, no bugs-of-significance, with one major exception: The optical drive does not work correctly) The drive is recognised correctly in device manager, there are no reported errors and the drive appears correctly in explorer.
Insert a disc, and the drive sounds like it is struggling to spin up correctly. Explorer takes about 2 minutes to read the volume in. Succeeds, gives the volume name and launches autoplay with the appropriate options (video for a DVD, slideshow for a cd of photos etc. . . ) Try to open to browse the disc, or run a file and the application hangs (e.g. try to browse with explorer, and explorer hangs; try to play a DVD and media player / centre hangs etc.). Killing the programme with task-manager usually works - eventually. The drive has the most recent firmware.
The real kicker is that I've tried two drives in the same machine, with the same error. I've tried the same drives in another (XP Pro) machine, and they work fine. I've even tried installing XP-Pro on the problem machine, and under XP-Pro, the drives work fine. The only thing I can think of is that is there is some kind of compatability issue between the motherboard and Vista x64 - which would affect the optical drive. That said, I have 2x Samsung Spinpoint SATA II drives installed on two other ports, and they work like lightning.
I am trying a new install on a new machine. I have 2 WD 250 GB drives (not in RAID config). When VISTA installs it tells me the first drive is not recognized as boot drive and won't load. I tried to install on second drive and get a error message about a volume does not meet VISTA criteria (or something like that)and won't install. These are both brand new drives. Both drives are correctly identified in the BIOS.
Right now i am booting off of an 80gb IDE hard drive but i want to clone the drive onto a 150gb sata drive and make the sata drive my boot drive. I have used Acronis True Image to clone the hard drive. I restarted and everything copied over in DOS successfully but then i tried to boot off of the sata drive and everything seemed to work out fine.. Vista load bar showed up, i was able to enter my password to log in and then it said preparing desktop like it was the first time i installed vista. It was stuck on that screen for a few mins and then a blank blue screen just came up. it seemed like it was the default background for Windows 2000 or something like that and it just stayed there. So now i'm back to booting off of the IDE drive...
I have a dual boot system: XP PRO on drive C and Vista Home Premium on drive B. I want to replace my hardrive, and move (or clone) Vista to new drive and be it C drive. Vista is still virgin and not other programs are installed, so changing it location from D to C drive will not influance any applications. I know how to create hard drive image. My question is how to make that new c drive with Vista on it bootable again. Is there any utility I can use?
Right now I have a single 640 gig HDD that everything's on. I've got a laptop too that I'm gonna be taking out on rotations eventually. I wanted to get a new smaller (250GB) HDD and put my Vista on that, so my 640 will be data only (then I could take it with me in an external enclosure and leave the desktop for my mom to use til I come back and collect it). I was gonna DBAN the 640, but I wanted to get the data off of it first- about 170 GB of stuff that I'd rather not lose.
My question is-
Can I install Vista on the smaller drive, boot with that, and access files on the other drive? Would it work if there's another Vista running on the other drive? (both SATA).
I have problem with my laptop with vista home premium 32bit. My C drive is full and I have lot of space(80 GB) left on D drive. Is there any way to move programs from C drive to D drive? I want to move microsoft office and other programs which occupy more space on C drive.
MY LAPTOP ONLY HAS ABOUT 70GB OF TOTAL SPACE ON IT'S C DRIVE, BUT ITALSO HAS 10GB OF STORAGE ON THE D DRIVE. IS IT POSSIBLE TO SIMPLY ELIMINATE THE D DRIVE, AND CONVERT IT'S 10GBOF STORAGE SPACE ONTO MY C DRIVE?
I have a question, I was wondering if it was possible that a virus/trojan or something else could cause my E: drive (DVD/CD) drive to randomly open? Because at points it will randomly pop open. Usually I notice this when I pick it up or set it down. I could understand if I accidentally hit the button picking it up but usually when I set it down Im not touching near that area. It has also popped open while on my lap.
Another thing I've noticed is even though I dont have a CD in the driver it will occasionally make the noise as though theres a CD in there. This has been a rather recent problem. I had a friends computer having problems so I did run a antivirus (A squared located under the free products). It did find some problems but said it deleted them. Im just wondering if this is a coincidence or if there is something potentially wrong because I'd like to take care of it over winter break.
my dvd/cd drive shuts down totally out of nowhere sometimes while im logged on. now it usually happens when i put the computer in sleep and when the computer starts up again its gone no where to be found anywhere on the hardware managers and everything. now i have all the drivers updated to the way they should be but its really irritating. restarting the computer doesnt help i have to fully shut it down adn then start it up again to get the drive back and recognized.
