Ctr Alt Del After Post, Blank Partition
Mar 23, 2008
I was having fun with the partitions (I just found the partitioning system in Vista its very neat). Anyways I kinda made a new partition and installed a fresh copy of windows on it, planning to replace my old one. I booted up the new one played around a bit and got off, and booted up the old partition. This is where the problem starts I'm in the old partition and back playing around in the partition stuff again. This time trying to make the new partition bigger, well I shrink the old one but it won't let me expand the old one so there is a blank partition now sitting there. When I click the new one (with vista installed on it) I see make active partition so I click it, it says something like warning this may cause failure if there isn't an bootable sorce on here or something like that so I'm like yea sure. I reboot the computer the bios post then after that is says "ssing" "s ctr alt del".................
View 5 Replies
ADVERTISEMENT
Mar 23, 2008
im unable to burn music from my laptop, i have vista basic and until now ive had no problems. I insert a blank cd and it auto loads, then it asks to format before continueing, i click yes, it formats then right at the end it says unable to finish formatting and opens the cd. I then try to burn onto it and the cd stays blank.
View 5 Replies
View Related
Oct 5, 2009
I recently acquired a Dell Studio XPS 435 desktop with Vista Ultimate as the OS. My plan is to upgrade to Windows 7 in the next couple of months or so. Therefore I won't need the Vista recovery partition on the hard drive. I am trying to eliminate it and add to the C: drive partition. Looking at my drive 0 in disk management I have from Right to left a C: partition 683Gb NTFS with the usual Healthy (System, Boot, Page File, Active, Crash Dump, Primary Partition). Directly to the left is the Recovery or D: drive which is 15Gb NTFS marked Healthy (Primary Partition) and finally to the left is the last partition of 71Mb marked Healthy (EISA Configuration). No idea what that is. Right clicking in the Recovery partition gives several options including: format, shrink volume, extend volume, delete volume, mark volume as active, change drive letter and paths, as well as help.
My question is how to remove the recovery partition and then extend the C: partition. My first thought is to format the recovery partition, delete the volume and then right click the C: drive partition and extend it but I really need some advice so I don't screw up the whole disk. For instance I have no idea what if anything hapens to the drive letters.I think maybe what I am calling partitions are really volumes so you can see I am over my head here.
View 6 Replies
View Related
Mar 23, 2008
I've been trying to burn an audio CD on my computer (i've only had this computer for a few months and this is the first time I've tried burning any kind of disc), and when I put the CD in and hit burn it says that my cd is not blank, I tried a handful of blank cds and it spit them all back out at me saying it's not blank. Just to make sure, I opened my computer and looked at the disc there and it WAS blank, so I don't know what to do.
View 5 Replies
View Related
Mar 16, 2009
i want to extend my system partition on Vista, and my friend Bob told me to use EASEUS Partition Master or Partition Magic, but i dont know which one to choose?
View 9 Replies
View Related
Feb 6, 2009
Well for some reason when i wiped my HD clean and tried reinstalling vista home premium i couldnt make a partition until i lowered it to 250 gig. even though when i got it there was 650 gig. So now ive got 400 gig of unallocated space i want to addon to this partition. how would i do that WITHOUT UN installing vista and LOSING my data
View 7 Replies
View Related
Jan 14, 2009
I think I messed up my hard drive while trying to erase the EISA partition on it. It's a Gateway P7811-FX laptop with a single 200 GB hard drive. Before, I only had 1 main partition: the C: Drive (176.31 GB), along with the hidden 10 GB EISA partition. After making recovery disks, I followed this tutorial: Delete and Remove to Unlock EISA Hidden Recovery or Diagnostic Partition in Vista » My Digital Life
Following that, I went in Disk Management. The hidden partition showed up, but I couldn't extend the C drive to use the unallocated 10 GB, so I converted it to a simple 10 GB volume. Then I used Acronis Disk Director Suite and merged the two partitions. And now, I can't do anything in Disk Management. There's only one partition now (186.31 GB), but when I right click on it, there's no options to create, shrink, delete, or extend the partition. They were there before, but the only option that shows up is Help.
Under Status, it says Healthy (Active, EISA Configuration). I think I merged the partitions the wrong way, so now there's no "System, Boot, Page File..." partition. Everything is on the EISA partition. When I try to run Acronis, the program doesn't load up. I've tried using Diskpart but I can't create any new partitions either.
View 9 Replies
View Related
Jul 26, 2009
I've got a Hp computer that has Vista Home Premium 64 bit on it and I want to remove the partition D which is the recovery partition. I have factory backup dvd's, made my own backup dvd's and have a True Image of the drive with both partitions, so I think I'm covered. Anyone know how to go about removing the complete partition?
View 5 Replies
View Related
Feb 17, 2009
I don't know if this is the place to post this thread so excuse me if this is the wrong group, I saw none that really applied. I'm running Vista SP1 64bit.
I'm looking for a Free Partition program to partition my external hard drive into at least 2 partitions. Does anyone know of such a program that's straight forward without all the bells and whistles? Also, would I set the partitions as Logical or Primary? Currently the drive is a Primary but if I partition it into 2 partitions what should they be?
View 9 Replies
View Related
Mar 13, 2009
My C: drive is 1Tb in size (931.43Gb), with Used Space of 73.8Gb and Free Space of 857.65Gb. I want to shrink the C: partition down to 200Gb, and use this just for my OS and App files - I'm running Vista Ultimate 64 bit. This would then leave me with a new partition of c. 750Gb for my data files and documents etc. However, Vista will only offer to shrink the C: partition by around 260Gb as a maximum. It will not allow me to select a larger size than this. I've tried turning off System Restore / Shadow Copies, but this makes no difference. Any ideas why this should be, and what can I do? p.s. I've tried using Acronis Disk Director as well, but whilst I can select a new C: partition size of 200Gb, when the system reboots, nothing has changed, so ADD won't work either.
View 4 Replies
View Related
Apr 5, 2008
Since I installed SP1 for Vista HP 64x I can no longer access my external hard drive/media player.
When I connect it via USB I get a message saying I need USB to IDE drivers. Windows then offers to search the internet etc but cannot find any. As a result Vista cannot see the drive and I am prevented from accessing nearly 300GB of my photos, music and movies.
This is a personal disaster. My best photographic work is on that drive.
I have had the drive for about a year and it worked perfectly before SP1. It's sold by a firm called Envizage but I believe they are just importers.
I contacted them and they replied that no drivers are required for Vista.
I was not even aware there was an IDE drive in there but I believe it is a 400GB Samsung. Can't check now obviously.
View 9 Replies
View Related
Feb 14, 2009
since I have had Windows Vista on my computer I can post a message somedays and not others. For some reason I have to press 'POST MESSAGE' several times before it will open the message session. I thought at 1st it may have been the forum itself but went in there today and used my laptoop with Windows XP and was able to leave a message staight away. Is there something I need to do to my computer to allow me into forums?
View 8 Replies
View Related
Jan 23, 2010
do not appear on the NG in Windows Live Mail on my computer. It was OK previously. I have unsubscribed the NG and then subscribed again. But still the same problem. But I see the msgs in the Sent Items folder. Tried sending thru:microsoft.public.windows.vista.mail
but still the same thing. I do not see the post in the NG, but it is there in the Sent Items folder. In both above cases, the posts can be seen in Google Groups from whereI have no choice but to post from. MY NGs may be corrupted.
View 4 Replies
View Related
Mar 23, 2008
just plugged in a usb exterior drive to do a new backup, then power light flashed a few times then PC rebooted but it freezes before the post beep.I have cleared the CMOS but no go are we talking motherboard do you think?
View 4 Replies
View Related
Jun 30, 2009
Post your over-clocking results if you have over-clocked your CPU with the model of it. I got my Intel Core 2 duo E8400 3.00Ghz to 3.85Ghz at stock cooling! (I cant Believe it too.)
View 9 Replies
View Related
Aug 22, 2009
I am working with a Dell M1330 running Windows Home Premium 32bit. Recently I started to have monitor issues (where the screen would go wonky and unviewable) shortly thereafter the computer would crash and reboot and for awhile worked ok. I contacted Dell Support and had them do an initial diagnosis and they believed the problem to be related to a faulty video card and heat sink. They replaced them but my BSoD has not gone away.
Rather every time I boot the machine the system gets to the log-in screen and then hits a blue screen shortly thereafter. And I have contacted Dell a second time and their solution was to do a Factory Image Restore. This is...unappealing...to me, as I have plenty of software that I can't immediately replace. Currently I can only run in Safe Mode. I have attached, as I saw in other posts the contents of my latest minidump file.
View 6 Replies
View Related
Oct 13, 2009
post the same question more than once on the SAME newsgroup, it is called multipost, post the same question in Different newsgroups, it is crosspost. One should not multipost, but its OK to crosspost.
View 8 Replies
View Related
Apr 2, 2008
When using my Vista computer, I can log in to this site, my name shows up, but when I click New/ question like I just did for this post, I just get a clunk sound and nothing happens. How to Delete cookies and temp internet files.
View 8 Replies
View Related
Nov 25, 2009
I can't tell you how many forums I've read to try and find an answer. My computer just will not start, the fans run, seems like it's starting to boot up, I get one POST beep then nothing. No BIOS, no activity on the screen at all, no flickering lights, no beeps, no anything. I am thinking this is a video card issue, I thought I read something that was similar to this. I remember reading about a chip for the on-board video that can me removed and re-installed that re-sets the on board video. Anyone heard of this?
Sure there are a lot of "Black Screen" type issues, but not like this. I noticed, prior to this problem happening about 2 weeks ago, there were a couple Microsoft updates within a few days. After DLing them, the computer seem to load slower and slower with each restart. Then the (true) Black Screen of Death arrived. Since then I have been at a complete loss. Tried all new Power Supply, new RAM, new Hard Drive....same issue. I reset the CLRTC jumper, took the battery out for hours, nothing seems to work.
View 5 Replies
View Related
Mar 29, 2008
Running a SONY VAIO Pentium D with Ultimate SP1 and every now and then when I do a restart or a hard reboot the machine will sit there. All the drives run but no joy and no beep. Then I turn it off and it may start or it may not. This machine is getting near three years old and is on 18+ hours a day. Everything else is fine and there are no other issues with it. I am thinking it may be the mobo battery.
View 7 Replies
View Related
Jun 5, 2008
I've noticed that most of the posts made in this forum end up on these sites... Why? Windows Vista Also, why did I find a copy of the post I made here on June 1st on this site?? How many more times are our posts copied??
View 4 Replies
View Related
Oct 4, 2009
im not getting any update e mails from this site for new posts to threads im subscribed to , i kinda rely on em to remmeber where ive been.............whats up with that then?? and before you ask about spam folders and junk e mail i know how to work it
View 4 Replies
View Related
Sep 14, 2008
I have the gigabyte eP45-DQ6 motherboard. When booting up, or rebooting, even before I get to the windows loading screen, I get a black screen. Almost like the monitor doesnt turn on but the computer sounds likes on. I reinstalled due to some other issues, but the same issue with loading happens. ITs sporadic. Sometimes it does it, others not. I updated to v11 of BIOS, and it still does it. Otherwise its very stable. Is there a setting in the motherboard? Is it vista related?
View 9 Replies
View Related
Jun 12, 2008
I had to re-install Vista after a system crash. I was able to access the restore drive via DOS and pull out the pst (Office 2003) files and copy them to a USB drive. I only had 1 pst file on my system but Vista backed it up to 7 different files. Now when I try to add these files to the restored system I get an error saying the file is not a a personal folders file. I used SCANPST on the largest backed up file and it recovered some of my email but when I try to use SCANPST on the other 6 backup files it says the files are
not personal folders files.
View 9 Replies
View Related
Mar 31, 2010
I cannot post to the group with the same name, when it is on msnews.microsoft.com
View 9 Replies
View Related
Nov 21, 2008
I have a relatives PC around my house with a funny problem that maybe you can give me your thoughts on what might cause this issue. First when its at his house sometimes when he turns it on it will sit practically at pre post test and do nothing. System is Asus M2N SLI Deluxe board, Nvidia 8600GT Video, 2Gb DDR2-800 ram, Card reader, floppy drive, 640Gb HDD,AMD x2 4200+, Antec 900 case and Thermaltake 620 watt PSU i think.
But when i bring it over to my place and fire it up it always works perfect? Any thoughts on why it always works at my house but randomly after using it for maybe months it always seem to do the same thing and look like basically its freezing before it really starts post test. Side note after sitting for a couple of days it looses its bios setting and yet its only 11 to almost 12 months old for the PC.
View 9 Replies
View Related
Mar 24, 2008
The computer is a Dell Inspiron with a recevery partition (D. Iinstalled SP1 two days ago. Since then the computer has been rebooted about 5 times. On the 6th, all hell broke loose. I don't believe any changes have been made since then. Naively, I want to question how RE does not know how to work with Vista SP1. Perhaps RE is on the D: partition and was not updated?
== Startup Repair ==
Number of Repair Attempts: 1
= Tests =
Check for Updates
Error Code = 0x0
= System Disk Test =
Error Code = 0x0
= Disk Failure Diagnostic =
Error Code = 0x0
= Disk Metadata Test =
Error Code = 0x0
= Target OS Test =
Error Code = 0x0
= Volume Content Check =
Error Code = 0x0
== Root Cause ==
The operating system version is incompatible with Startup Repair.
View 9 Replies
View Related
Mar 23, 2008
I have a mystery on my hands. I subscribe to many newsgroups, through optonline cable. With m.p.w.v.general, I have no incoming posts since February 19, 2008. When I send a post to that group, all seems ok at my end, but it never reaches the group. All my other groups are ok.
View 8 Replies
View Related
Jun 11, 2009
I recently replaced a bunch of things in my computer - basically everything other than the drives and sound card. Reactivation was a pain but seemed to go smoothly. I updated all the drivers in ths OS (Vista Ultimate, 32 bit) and let it "burn in" for a couple of days by running Prime95 and keeping an eye on temperatures, stability, etc. Everything worked fine - no apparent problems with hardware or drivers and things would chug along quite nicely.
I notice that SP2 is lurking in Windows updates, so figure what the heck - improve performance and stability a bit. So I went ahead and installed it. Unfortunately, to my dismay, there was a background installation of an updated version of Avira Antivirus that I had forgotten about. Something blew up and I had to hard reboot. SP2 had not been completely installed it (did not go through the part with the reboots). In any event, I tried it again and this time it did finish - no installation problems at all with SP2. Also completed the Avira installation, which also went fine...................
View 6 Replies
View Related
Mar 27, 2008
Can't Post Graphic Images In News or Emails? I try to copy and 20 post a photo or image, it attaches it or won't give me the option of pasting at 20 all. What's wrong?
View 7 Replies
View Related
Oct 6, 2009
My Intel P5 Vista 32 machine will not turn on and boot totally until I unplug it and plug it in again. The POST stops at the end of the the RAM check and freezes. When I unplug and plug it in again it boots successfully.
I had fiddled around with power options and drive SMART settings trying to get WOL (Wake on Lan) to work.....it still doesn't work at all. Foolishly I've forgotten all of the few BIOS tweakings I made. Some I've corrected like returning the Suspend mode to Auto from S3.
View 5 Replies
View Related