I've noticed that most of the posts made in this forum end up on these sites... Why? Windows Vista Also, why did I find a copy of the post I made here on June 1st on this site?? How many more times are our posts copied??
View 4 RepliesI recently went into Change Date & Time Internet time tab and chose a time standard to connect with. After doing that I went onto the internet and connected with time.nist.gov and checked the time. After that I was no longer able to go into the internet time tab. It tells me that time.nist.gov is the time connection and I can't change it. It tells me I need to have permission to do this as administrator. I am the administrator! What goes here?
View 6 Replies View RelatedI am not getting very far with WLM discussion so I am asking you because I am assuming it is a similar solution in WM. When I send a photo attachment, the receiver is getting 5 or more copies. Any thoughts on how to fix this? I know it is not a big deal but it is creating rather large emails!
View 9 Replies View Relateddate taken for photo copied, actually modified date on any documents copied in explorer tends to changed to the Now (date and time of copying). especially annoying for folders
View 5 Replies View RelatedI'm trying to use a 4G USB storage for transferring files from an XP platform to a Vista platform. I'm finding something very funny. I copy the files to the storage (and I can see and open them on the XP machine). Than I put the USB storage on the Vista machine. I can see again the files but I cannot open them (the files seem to be corrupted). Finally I put the USB storage on the XP and I see that the files are corrupted. It looks like Vista has corrupted my files. I'm using the same USB storage for transferring files between XP machines without any problem.
View 4 Replies View RelatedI am trying to install AR2007 on my Vista PC. Installs fine, full installation. When i try to start the program I get error "your registry settings for this application were not copied correctly. Run Setup from the location where you orinally installed it" I have done this but still get the same error message, and cannot start the program
View 9 Replies View Relatedmeasure the ReBoot-Time (restart time) for our systems. You can see how to here: How to See What Your Boot Up Time is in Vista
Here's my ReBoot-Time:
Running Processes: 41
Started Services: 36
Automatic logon
Is it wise to have more than 1 antispyware program performing real-time protection at one time?
View 9 Replies View RelatedWe are using Dell laptops while travelling or at field offices.
We have to reset the clock and time zone, every time when we get to new
locations. That is quite a hassle. Is there better ways to do this?
I've got an Sony VGN-BX197XP laptop that I've upgraded to Windows Vista Ultimate. Since then I've encountered some strange display-related issues:
1) I could only boot into Aero about 50% of the time. The rest of the time I forced onto the Standard theme with no Aero option. Since installing Vista SP1 I can't get Aero at all.
2) When not running in Aero mode I can't get the Windows Media Player to play video files, nor get a Perfomance Index.
3) If I plug in an external monitor I can't get a picture on the laptop monitor but I *do* get a picture on the external monitor and it runs Aero 100% of the time. It will also play video files and give me a performance index.
Recently I have bought Vista Home Premium x64 and to be honest I am having quite annoying issue with this OS . I had installed Vista on RAID0 partition. Additionally I have three other sata drives for my data . I noticed that from time to time when I am working on vista , system freeze for 2-3 sec then everything is fine and I can continue work. Particulary when for example I am opening some application or even windows explorer , my computer etc. (when it hangs I can't move my mouse). Moreover when it freeze I "hear" something inside my computer case as if my computer weak up from hibernation.
View 7 Replies View RelatedIm in vista 64 bit. I was trying to install a licence for Cubase and was getting a time, calendar error. I look and everything is on time to the second hand on my wall. But for the hell of it, I tryed syncing it to all the availible servers but got: "An error occured while Windows was synchronizing with whatever.server" However I can ping the servers in comand prompt. And also, like the topic says, It still keeps perfect time. It set it's own time. So Im clueless. A bios thing perhaps?
View 5 Replies View RelatedSince I installed SP1 for Vista HP 64x I can no longer access my external hard drive/media player.
When I connect it via USB I get a message saying I need USB to IDE drivers. Windows then offers to search the internet etc but cannot find any. As a result Vista cannot see the drive and I am prevented from accessing nearly 300GB of my photos, music and movies.
This is a personal disaster. My best photographic work is on that drive.
I have had the drive for about a year and it worked perfectly before SP1. It's sold by a firm called Envizage but I believe they are just importers.
I contacted them and they replied that no drivers are required for Vista.
I was not even aware there was an IDE drive in there but I believe it is a 400GB Samsung. Can't check now obviously.
since I have had Windows Vista on my computer I can post a message somedays and not others. For some reason I have to press 'POST MESSAGE' several times before it will open the message session. I thought at 1st it may have been the forum itself but went in there today and used my laptoop with Windows XP and was able to leave a message staight away. Is there something I need to do to my computer to allow me into forums?
View 8 Replies View Relateddo not appear on the NG in Windows Live Mail on my computer. It was OK previously. I have unsubscribed the NG and then subscribed again. But still the same problem. But I see the msgs in the Sent Items folder. Tried sending thru:microsoft.public.windows.vista.mail
but still the same thing. I do not see the post in the NG, but it is there in the Sent Items folder. In both above cases, the posts can be seen in Google Groups from whereI have no choice but to post from. MY NGs may be corrupted.
just plugged in a usb exterior drive to do a new backup, then power light flashed a few times then PC rebooted but it freezes before the post beep.I have cleared the CMOS but no go are we talking motherboard do you think?
View 4 Replies View RelatedPost your over-clocking results if you have over-clocked your CPU with the model of it. I got my Intel Core 2 duo E8400 3.00Ghz to 3.85Ghz at stock cooling! (I cant Believe it too.)
View 9 Replies View RelatedI am working with a Dell M1330 running Windows Home Premium 32bit. Recently I started to have monitor issues (where the screen would go wonky and unviewable) shortly thereafter the computer would crash and reboot and for awhile worked ok. I contacted Dell Support and had them do an initial diagnosis and they believed the problem to be related to a faulty video card and heat sink. They replaced them but my BSoD has not gone away.
Rather every time I boot the machine the system gets to the log-in screen and then hits a blue screen shortly thereafter. And I have contacted Dell a second time and their solution was to do a Factory Image Restore. This is...unappealing...to me, as I have plenty of software that I can't immediately replace. Currently I can only run in Safe Mode. I have attached, as I saw in other posts the contents of my latest minidump file.
post the same question more than once on the SAME newsgroup, it is called multipost, post the same question in Different newsgroups, it is crosspost. One should not multipost, but its OK to crosspost.
View 8 Replies View RelatedWhen using my Vista computer, I can log in to this site, my name shows up, but when I click New/ question like I just did for this post, I just get a clunk sound and nothing happens. How to Delete cookies and temp internet files.
View 8 Replies View RelatedI can't tell you how many forums I've read to try and find an answer. My computer just will not start, the fans run, seems like it's starting to boot up, I get one POST beep then nothing. No BIOS, no activity on the screen at all, no flickering lights, no beeps, no anything. I am thinking this is a video card issue, I thought I read something that was similar to this. I remember reading about a chip for the on-board video that can me removed and re-installed that re-sets the on board video. Anyone heard of this?
Sure there are a lot of "Black Screen" type issues, but not like this. I noticed, prior to this problem happening about 2 weeks ago, there were a couple Microsoft updates within a few days. After DLing them, the computer seem to load slower and slower with each restart. Then the (true) Black Screen of Death arrived. Since then I have been at a complete loss. Tried all new Power Supply, new RAM, new Hard Drive....same issue. I reset the CLRTC jumper, took the battery out for hours, nothing seems to work.
I was having fun with the partitions (I just found the partitioning system in Vista its very neat). Anyways I kinda made a new partition and installed a fresh copy of windows on it, planning to replace my old one. I booted up the new one played around a bit and got off, and booted up the old partition. This is where the problem starts I'm in the old partition and back playing around in the partition stuff again. This time trying to make the new partition bigger, well I shrink the old one but it won't let me expand the old one so there is a blank partition now sitting there. When I click the new one (with vista installed on it) I see make active partition so I click it, it says something like warning this may cause failure if there isn't an bootable sorce on here or something like that so I'm like yea sure. I reboot the computer the bios post then after that is says "ssing" "s ctr alt del".................
View 5 Replies View RelatedRunning a SONY VAIO Pentium D with Ultimate SP1 and every now and then when I do a restart or a hard reboot the machine will sit there. All the drives run but no joy and no beep. Then I turn it off and it may start or it may not. This machine is getting near three years old and is on 18+ hours a day. Everything else is fine and there are no other issues with it. I am thinking it may be the mobo battery.
View 7 Replies View Relatedim not getting any update e mails from this site for new posts to threads im subscribed to , i kinda rely on em to remmeber where ive been.............whats up with that then?? and before you ask about spam folders and junk e mail i know how to work it
View 4 Replies View RelatedI have the gigabyte eP45-DQ6 motherboard. When booting up, or rebooting, even before I get to the windows loading screen, I get a black screen. Almost like the monitor doesnt turn on but the computer sounds likes on. I reinstalled due to some other issues, but the same issue with loading happens. ITs sporadic. Sometimes it does it, others not. I updated to v11 of BIOS, and it still does it. Otherwise its very stable. Is there a setting in the motherboard? Is it vista related?
View 9 Replies View RelatedI had to re-install Vista after a system crash. I was able to access the restore drive via DOS and pull out the pst (Office 2003) files and copy them to a USB drive. I only had 1 pst file on my system but Vista backed it up to 7 different files. Now when I try to add these files to the restored system I get an error saying the file is not a a personal folders file. I used SCANPST on the largest backed up file and it recovered some of my email but when I try to use SCANPST on the other 6 backup files it says the files are
not personal folders files.
I cannot post to the group with the same name, when it is on msnews.microsoft.com
View 9 Replies View RelatedI have a relatives PC around my house with a funny problem that maybe you can give me your thoughts on what might cause this issue. First when its at his house sometimes when he turns it on it will sit practically at pre post test and do nothing. System is Asus M2N SLI Deluxe board, Nvidia 8600GT Video, 2Gb DDR2-800 ram, Card reader, floppy drive, 640Gb HDD,AMD x2 4200+, Antec 900 case and Thermaltake 620 watt PSU i think.
But when i bring it over to my place and fire it up it always works perfect? Any thoughts on why it always works at my house but randomly after using it for maybe months it always seem to do the same thing and look like basically its freezing before it really starts post test. Side note after sitting for a couple of days it looses its bios setting and yet its only 11 to almost 12 months old for the PC.
The computer is a Dell Inspiron with a recevery partition (D. Iinstalled SP1 two days ago. Since then the computer has been rebooted about 5 times. On the 6th, all hell broke loose. I don't believe any changes have been made since then. Naively, I want to question how RE does not know how to work with Vista SP1. Perhaps RE is on the D: partition and was not updated?
== Startup Repair ==
Number of Repair Attempts: 1
= Tests =
Check for Updates
Error Code = 0x0
= System Disk Test =
Error Code = 0x0
= Disk Failure Diagnostic =
Error Code = 0x0
= Disk Metadata Test =
Error Code = 0x0
= Target OS Test =
Error Code = 0x0
= Volume Content Check =
Error Code = 0x0
== Root Cause ==
The operating system version is incompatible with Startup Repair.
I have a mystery on my hands. I subscribe to many newsgroups, through optonline cable. With m.p.w.v.general, I have no incoming posts since February 19, 2008. When I send a post to that group, all seems ok at my end, but it never reaches the group. All my other groups are ok.
View 8 Replies View RelatedI recently replaced a bunch of things in my computer - basically everything other than the drives and sound card. Reactivation was a pain but seemed to go smoothly. I updated all the drivers in ths OS (Vista Ultimate, 32 bit) and let it "burn in" for a couple of days by running Prime95 and keeping an eye on temperatures, stability, etc. Everything worked fine - no apparent problems with hardware or drivers and things would chug along quite nicely.
I notice that SP2 is lurking in Windows updates, so figure what the heck - improve performance and stability a bit. So I went ahead and installed it. Unfortunately, to my dismay, there was a background installation of an updated version of Avira Antivirus that I had forgotten about. Something blew up and I had to hard reboot. SP2 had not been completely installed it (did not go through the part with the reboots). In any event, I tried it again and this time it did finish - no installation problems at all with SP2. Also completed the Avira installation, which also went fine...................