how to create a duel boot PC? I have genuine Vista Home Premium x64 and XP x64 licenses, multiple drives that I could use or partition, and a computer that can handle it, but I have never created a duel boot computer before. Currently the computer runs only on Vista Home Premium x64, and there are some programs and hardware that I would like to occasionally like to access that are only compatible with XP including a Lexmark x83 multifunction printer and Microsoft Picture It! Publishing 2001 (in addition to a couple other programs that just seem to work more smoothly on XP). I still want Vista available too for other programs too though.
I have a laptop with Vista. I want WinXP (Drivers are available from Dell) Can I install WinXP on the same drive? Or does it _have_ to be on a separate drive?
I had an Vista 32 bit version installed and which was used fine.3 days before I had upgrade my PC's memory to 4G, then I find Vista 32 Bit version can not recognize all the memory.So I try to install an Vista 64 Bit version for the test to check if the 64 bit system is ok for me.
The problem is, Vista 32 was installed on to the 3rd partition of the harddisk,usually the drive letter will be E in Windows XP and previous version windows, although it in Vista it display as C drive. I tried to install the 64 Bit Vista in to the 4th partiton. After all the drivers and applications install completed,that seems so far so good. Then I find my previous F drive now names C. The Drive C in Vista 32 Bit names E now. When I try to boot into Vista 32, the error message : winload.exe could not find.
I used bcdedit try to redirect the device and osdevice to E drive, Vista 32 still could not start normally, the system will hang up in the blue desktop background,seems can not load user profile or sth like that.
I have check the E drive, all the files of Vista 32 are still there.
We just bought 2 Toshiba Satellites A200, both run Vista Home Premium. Now one does not boot. Some of the screen messages read:
"Windows Error Recovery" "Windows failed to start." "Launch repair (recommended)"
When we click Launch repair the screen goes to Windows Boot Manager and it reads: "Windows has encountered a problem communicating with a device connected to your computer.
This error can be caused by unplugging a removable storage device such as an external usb drive while the device is in use, or by faulty hardware such as a hard drive or cd-rom drive that is failing. Make sure any removable storage is properly connected and then restart your computer. If you continue to receive this error message, contact the hardware manufacturer.......
I am running Windows Vista Home Premium 32 (system specs: laptop 2.1 Ghz core 2 duo, 4 gb RAM, 500gb hd (about half full) nvidia 8400M GS, Avira Premium Security Suite). I have had the computer for about a year running fine with 1 main admin account. Now when I need to create an account for another user I cannot create one, either admin or standard. When I create it, using either the control panel or command prompt, it creates the user picture, making the account visible on the control panel user accounts screen, and on logon screen. However, when trying to log into the new account I am greeted with the error "User profile service failed on logon. User profile cannot be loaded." The standard fix for this from various forums is to edit the registry key of the account. However, on going to regedit I see that no key even exists for the account. On further investigation I discover that no user files have been created either. I attempted a system restore, but discovered that all my past restore points were gone, and intruigingly, the computer had stopped createing 24 hour checkpoints. I cannot say for definite whether it was this issue or another one that caused system restore to mess up, as I don't check my system restore all that often. Either way, system restore is not an option. There have been mentions of a full Vista reinstall, though if at all possible I would like to avoid this.
I am having problems with creating shortcuts on my desktop. when i select send to desktop (create shortcut) it comes up with the error. Windows could create the shortcut. Check to see if the disc is full.I have over 180 GB free space left. To get things to the desktop i can drag it into the tab section next to the start icon, and then drag onto desktop.But when i do this i am always required to give permission and it creates two desktop icons.i have been having problems with my catalyst control centre but i dont think they are related.
When I install Vista, it wants to force me to create a local account, and it won't let me create one called Administrator, becuase the name is already used (thus the Administrator account exists). I don't want to create some dummy account just just to log in to join the domain. How do I get past the "Choose a user name and picture" screen and log in as Administrator so I can just install the network drivers and join my domain?
I went to turn it on this morning, I just had a black screen showing the following words;
Press F2 to run Press F11 to boot menu Auto detecting PRI Master Atapai CDROM.
It then went to reboot and select proper boot device or insert boot media in selected boot device and press a key. I went into the BIOS to change the boot order and inserted my Vista home premium 32bit. I then got windows is loading in files. After a short while I got the black start up screen with Microsoft Corporation but after a few seconds it just froze. Moments later it went to a blue screen with white writing part of which said the following; A PROBLEM HAS BEEN DETECTED AND WINDOWS HAS BEEN SHUT DOWN TO PREVENT DAMAGE TI YOUR COMPUTER.
i can no longer boot up my computer as the boot/bcd file is miising or corrupt i found a windows artical on how to fix it and it didnt work ive also tryedd googleing the problem and got many results but none that seem to fit the problem or are helpful what can i do to solve this
I have a Dell Inspiron 530 Desktop and every now and then it won't boot up. I get a black screen with 'Windows Boot Manager' ," Windows failed to start. A recent hardware or software change might be the cause."
File: BootBCD Status: 0xc000000f Info: An error occurred while attemping to read the boot config data.
When I boot the PC with the Installation disc, it repairs it and it works until the next time. When I click on the details to see what is to be repaired, this come up:.......
I have windows xp installed right now and I dual booted with vista by re-partitioning my hard drive. After encountering problems with vista I delted the vista partition and resized the xp partition back to it's original size. I am now stuck with the windows vista boot loader which persistantly telling me that the windows vista files are not present etc. etc. Is there any way that I can delted the vista bootloader and go back to using the xp bootloader?
Vista used to boot up very quickly. Now it spends ages on the page with the "loading" bar. Is it performing some sort of CHKDSK during this time? I only have sidebar and rocket dock starting up, and it's fast again when it gets to the desktop, it's just that loading bit takes quite an ages, and it didn't used to. Virus/spyware/malware free. How do i find out if it's doing some sort of chkdsk at boot?
I have more or less completed all the driver upgrades and windows updates but I keep getting repeated boot failures of Vista. I can always get into Safe mode but in Normal mode the boot fails just after the first spash screen at the point when the screen goes blank to be replaced by the small circular Vista logo. After 2 or 3 attempts it succeeds to load but then the problem seems to reoccur, particularly when I have been back to XP for a while.
I had a similar problem with XP but that seems to have sorted itself out. I have tired looking in the logs for faults and failures but no clues there. I am running an ASUS P5E MB with Intel Quad 6600, 4Gig RAM, GeForce 8800GT and 2x250Gig HDs.
This is the best install I have ever done (or was)…I did a fresh install and followed a tweak which was to very enlightening, to say the least. From there I have been to a few other sites and moved on to fully customizing my desktop/login and……well…this is where I stuffed up…My BOOT screen no longer works properly, even with the original “winload.exe.mui” file replaced.
I downloaded and used “Vista Boot Logo Generator” I loved the results on my last install…It worked well. Upon deciding to do a fresh install with Tweaking in mind, I simply coppied over a Boot logo I made previously after allowing permissions and all that as well as changing the NO GUI in msconfig…ect….BUT......
i am new to this forum but i have problem with my system bootup. my system takes too long to boot and it started 3days ago. it takes about 120secs at bootscreen alone. i believe it is not my start up programs as it takes about 3 secs to start up from login page. i donot use any third party bootscreen. normally, my system boots in 30 secs but now i am facing a lot of problem which i do not understand. i have tried all the tutorials in this forum relating to bootup problems but found no luck.
XP is on 1st primary partition [active] and is old. Vista is on 2nd Primary partition and is new. Dual boot info, I believe, is all on the XP partition. Soon I will want to go to Vista only. Do I just delete the XP partition (after imaging it, of course!) and set Vista partition to active? (Paragon Partition Manager). Will it then automatically boot into Vista (which has no boot.ini)?
I've had Vista x64 installed for about 2 full months now and I've recently begun having a lot of problems. One being: 187 seconds. What the hell? Before you ask, here are my specs. Lots of fast memory, a fast processor, 7200RPM boot drive (not listed), and ****ing awful performance. What gets me is that the delayed boot time is before I even see the "Welcome" screen.
My current boot time distribution: 1. BIOS does all its fancy stuff very quickly (about 6-7 seconds or so) 2. I get to my boot loader and it defaults to Vista after 5 seconds (dual-booting Vista/Ubuntu). 3. I then see the Vista loading screen (black screen with green loading bar) for about 4-5 seconds................
hp tool ask to do this "Then please go to using DOS system files column and add the link to where you stored the unzipped DOS boot up files. "so my question is , where can i get the "dos boot up files" for vista64? with the hp tool i need to locate the dos boot file address . so how do i do that? do i have to download vista64 boot files? every google links explains how to do this with xp. couldnt find any for vista. makes me feel like im the only person on the planet using vista.
I have been trying to figure out how to create a task in Task Scheduler. I would like my machine to create a restore point daily. I am ok until the Actions dialog.
Quote: When you create a task, you must specify the action that will occur when your task starts. Am I correct in assuming that I can create a task that will create a restore point on a daily schedule for me?
As y'all are aware it wants me to specify the name of the program I want it to run. I have no idea of the name of the program that creates restore points. And I have no idea where to find the name. I have been using this tutorial but I need the name of the program.
After a month or two honeymoon with my new computer last summer, Windows Vista quit letting me create new file folders!!! This is really, really annoying, needless to say. The other thing is that Windows Vista crashed this weekend and lost some of my files - and the start menu quit working. I think some of the indexes got screwed up or something. I don't know what brought this on except that we had a couple of power failures - and the machine doesn't seem to run chkdsk automatically on restart. If I started the machine and walked away and didn't see the prompt, then I've been using a 'dirty disk' for a week or two and it finally crashed. Or I also installed wireless networking. Also Windows Update downloads automatically and could have downloaded something incompatible with my software. So who knows what might have caused this .I couldn't restore either - now if I ask for Windows restore, it comes up with an error message.I've been using DOS and windows machines for 20 years and I've never had this happen to me before. I've always had virus checkers and been conscientious about backing up my data.
I am trying to create a shortcut to c:Program FilesMozilla KompozerKompoZer 0.7.10kompozer.exe The window within which you create shortcuts says that this file does not exist! I am looking at that file! I have opened "command prompt" and cd to that subdirectory. question: Am I trying to fight UAC? I am *certain* that my spelling is correct.
I have a set of files saved on a hard drive which were copied from a video DVD. Is there a way to burn a DVD out of these files so that the DVD can be played by an ordinary DVD player?
I am unable to find anything resembling a Fax Account setup on my Windows Vista Home Premium machine. I have search the Web extensively to try and resolve this issue, but have had no luck. Everybody says you need to go to "Scan and Fax", under All Programs. My problem is that I have no such menu option anywhere.
I have vista business 64x on a standalone pc. Since i have installed SP1 task scheduler and event viewer are not working anymore. Message: MMC could not create the snap-in I've tried about everything what i found in google, and what possible to try. Registered dll's, checked security, installed sp2, verifyed .net. No way to get it worked. I have only one admin account on the PC with full rights of course.
Set up a VPN on my laptop 2 moths ago and it worked fine. Today I cannot find it. Its gone from Connect To and its not in Manager Network Connections. I cant create a new one with the same name because the computer tells me it exists and if I create a new connection it does not appear anywhere either.
