I have the regular Vista installation DVD, and I have downloaded the full SP1 file (which I installed, BTW). How can I create a "slipstreamed" Vista SP1 installation DVD (equivalent to what was possible with XP)?
View 9 RepliesI am trying to create a Recovery Disk in my Acer laptop, I went through their User Manual and there was not enough information to the procedure. Could some one point me in the right direction so that I can do this. My hard disk has a hidden partition of 7.8GB with EISA Configuration but in the Disk Management it says it is 100% Free. The other partition is C: which is my system partition. I hope I have given enough information if not please let me know. I have also requested the Acer but I believe they will only direct me to their eRecovery Management Tool.
View 5 Replies View RelatedI have an OEM laptop and I wanted to know if there was any way possible of creating a custom Windows DVD that installs Windows Vista with SP2 already installed without a windows installation disk. The reason I want to do this is that when I have to recover with the OEM recovery disk (eww) It installs two extra DVDs work of crud with it.
View 6 Replies View RelatedI bought a downloaded version of Vista from Microsoft. I did not get a CD or DVD. I installed it with a dual boot putting Vista on a little partition so I could see how I liked it. No I am ready to wipe out my XP and Previous Vista and start over. However all I have is this big zip file and unpacked there is no documentation or anything for that matter on how to make a disk, or make a disk from an ISO file.
View 9 Replies View RelatedI have been trying to create the recovery disk for my Acer laptop, I have used the eRecovery management and when I insert the DVD-R disk it comes up with the message burning failed insert a blank DVD. Could some one tell what I am doing wrong.
View 9 Replies View RelatedI have my old XP load on my C drive and Vista on the D drive. I'm ready to wipe out XP (I know lots of folks would go the other way) so I can create a mirror copy of Vista for fault tolerance. Before I enable RAID in the firmware, I'm thinking I need to format the C drive. However the Disk Management utility has the format command grayed out for the C drive. It shows up as:
Disk 0: C: NTFS, Healthy (System, Active, Primary Partition)
My D drive is: Disk 2: D: NTFS, Healthy (Boot, Page File, Crash Dump, Primary
Partition)
What is the proper way to wipe out C so I can create my RAID mirror?
I want to have two flash drives working in like a raid mirror.I can plug in one of the usb flash drives and get say a new E:, but of course if I plug in the second one I get a f:
Is there a way to have windows vista (or 7 I guess) configured so that the two flash drives are just the E: and they are working in a raid mirror config via software ?
I downloaded Windows 7 RC1 with the intent of adding a partition to my HDD and dual booting. My understanding is that I would need a 16GB partition. My Disk Management Console tells me I have two existing primary partitions (expected). D (the recovery partition) is 6.62GB. The other (C) makes up the difference (~142GB) and has 47.1GB free space. When I begin the "shrink volume" process, it says that only 3MB is available to shrink C. I checked the page file and it has less than 3GB allocated to it. So, I have two questions. First, why isn't more shrinkage ;>) space available? Two, assuming that with your help I can find more space, if I try to create a 16GB partition from C will I significantly affect computer performance?
View 9 Replies View RelatedI need to create a system startup disk to upgrade my system bios. How do I do this?
View 6 Replies View Relatedi have a legal vista ultimate license unused on any machine and NOT OEM. i would like to install vista ultimate 64 on a new laptop. it came preinstalled with home premium 32 (the T7500 processor so it can take 64bit). i would like to create a custom install disk containing the OS and the HP vista 64 drivers. I would also like if possible to include some of the pre installed bloatware (I know, I know, I dont want MS works or norton, but I would not mind the HP help system and the system monitors and system update etc).
I have created a recovery disk which contains 6 or 7 .wim files each about the size of a CD. I presume the windows (home premium) as well as all the bloatware and drivers are included in these image files. I installed the WAIK and tried to use to GUI image manager (or whatever it is called) to mount the files but could not. I was able to dir using imageX command line, but was unable to mount the image file or files using imagex /mount rw if i could somehow accomplish this maybe i could build a custom image file with the ultimate 64 and drivers and etc/ I guess an alternative is to use vlite, and HP vista 64 drivers that I download, but I dont know if this would give me the system monitoring tools
I have Vista Ultimate x86 on my main harddrive. Yesterday I tried to dual boot the beta of Windows 7 on my secondary harddrive which is clean. During the final steps of the installation, I had an electrical shortage. My installation of Windows 7 was incomplete on my second harddrive. Now when I try to open my computer, booting into Vista on my main drive is very slow and has limited functionality. Opening "My Computer" and the Vista disk manager does not work so I cant format the harddrive in question. However when I disconnect that harddrive from my computer, Vista loads fine. So if anyone can give me solutions for formatting my harddrive without having to log into Vista that would be great.
View 7 Replies View RelatedI have a need to install 4 systems of Vista on a single machine (4 partitions of my main system hard disk). Given that Vista always seems to see its own system drive as C, would it be possible to create my "master image" with SP1, all my drivers, utilities, system tweaks, and other "generic" applications (like Office/Acrobat etc), and then just clone this drive across to all the partitions I need to set up (on D, E, and F). Then, using VistaBootPRO, I could edit the BCD to include all the other partitions. Can anyone think of a reason this would not work?
View 9 Replies View RelatedSeveral weeks ago I installed Vista Ultimate (from Technet) with the SP1 beta integrated. Now I have later version of SP1 in the form of a stand-alone installer. When I try to install it I get a message saying that SP1 is already installed. How can I install the later version of the service pack? I'd prefer not to do a complete reinstall from my original Vista non-SP disk.
View 5 Replies View RelatedSince Vista SP1 can not be integrated into the regular dvd, I wanted to know will they be offering a public download of the integrated install image. I know the currently have this for the technet, msdn and connect subscribers but what about the rest of us who dont have the cash to get one of these accounts?
View 6 Replies View RelatedToshiba Satellite X205-SLi4 Windows Vista Ultimate 32-bit SP2 Does anyone know where to get the latest TI PCIxx12 Integrated FlashMedia Controller ? I went to ti.com but I have never experienced a worse website for the purpose of locating & downloading drivers. I couldn't find it. ( In contrast, nVIDIA's website is so easy it's almost impossible not to quickly find the correct driver. )
View 5 Replies View RelatedEverything is working fine (so far) except that it does not recognize integrated Ethernet adapter at all. On advise of support guys did driver reinstall several time including while in Safe Mode. Even restored factory settings i.e. reinstalled OS. If I run "pnputil -e" then the adapter package is listed but the adapter just does not show up in Device Manager.
Already verified that it is enabled in BIOS. Netgear USB adapter worked just fine after installing vista driver for it. Thinking of putting in a PCI card but that will occupy one slot. Only 3 PCI slots are available - standard, Express 1 and Express 16.
is there any driver for vista of that sound card? I have Vista Ultimate and SP1 doesn?t appears un Windows Update.
View 6 Replies View Relatedmy computer is a hp pavilion a1230n and when i upgraded it to windows vista, the sound card suddenly stopped working! i looked around, and my sound card doesn't seem to have any drivers for windows vista. i looked at the model, and i think this is it :integrated ati radeon xpress 200. my device manager says no device has been installed, but it's there because it was working with windows xp. i was wondering if there's any way i could update it or something.
View 6 Replies View RelatedI am running Windows Vista Home Premium 32 (system specs: laptop 2.1 Ghz core 2 duo, 4 gb RAM, 500gb hd (about half full) nvidia 8400M GS, Avira Premium Security Suite). I have had the computer for about a year running fine with 1 main admin account. Now when I need to create an account for another user I cannot create one, either admin or standard. When I create it, using either the control panel or command prompt, it creates the user picture, making the account visible on the control panel user accounts screen, and on logon screen. However, when trying to log into the new account I am greeted with the error "User profile service failed on logon. User profile cannot be loaded." The standard fix for this from various forums is to edit the registry key of the account. However, on going to regedit I see that no key even exists for the account. On further investigation I discover that no user files have been created either. I attempted a system restore, but discovered that all my past restore points were gone, and intruigingly, the computer had stopped createing 24 hour checkpoints. I cannot say for definite whether it was this issue or another one that caused system restore to mess up, as I don't check my system restore all that often. Either way, system restore is not an option. There have been mentions of a full Vista reinstall, though if at all possible I would like to avoid this.
View 9 Replies View RelatedI am having problems with creating shortcuts on my desktop. when i select send to desktop (create shortcut) it comes up with the error. Windows could create the shortcut. Check to see if the disc is full.I have over 180 GB free space left. To get things to the desktop i can drag it into the tab section next to the start icon, and then drag onto desktop.But when i do this i am always required to give permission and it creates two desktop icons.i have been having problems with my catalyst control centre but i dont think they are related.
View 9 Replies View RelatedWhen I install Vista, it wants to force me to create a local account, and it won't let me create one called Administrator, becuase the name is already used (thus the Administrator account exists). I don't want to create some dummy account just just to log in to join the domain. How do I get past the "Choose a user name and picture" screen and log in as Administrator so I can just install the network drivers and join my domain?
View 4 Replies View RelatedDoes anybody know exactly what might have happened to require me to use my Vista installation disk to "fix" a Vista boot problem? Here's the situation:
I have five OS installations on one hard drive -- each in a separate partition. When I boot, the Microsoft boot "loader" gives me a choice of "Older Windows Installations" (a separate screen from which I can choose either of two XP Pro installations), Vista 32-bit, Vista 64- bit, and Windows 7 Beta.
Over the weekend I realized I was running out of room in my Vista 32- bit partition, so I ensured all the partitions were backed up individually with Ghost and deleted all the OS partitions but my C: partition (one of the XP installations) using the Windows disk manager. Then I rebuilt and resized the partitions and reinstalled the OSs using Ghost.......................
Is it normal for Disk Defragmenter to Analyze the disk AFTER it defragments? I know it does it before and then I click 'Defrag Now' and it proceeds to defrag my hard drive. But today I was watching it and noticed that all of a sudden it stopped defragmenting and the info changed to 'Analyzing disk...'.
View 9 Replies View RelatedI have four (4) hard disks C: D: E: F: all are connected with sata cable and power cable.(of course) The F: is outside from the pc and connected via external SATA and power cable (like usb NOT usb) I know,with USB external hard disk i can use the safely remove option.
Is there any option to safely remove SATA hard disk without Shut Down the pc?
1) Start-Control Panel-Device Manager-Disk Drives-Right Click on hard disk-Properties-Policies-UntikDisable the Enable write cashing on the disk??
2) Start-Control Panel-Device Manager-Disk Drives-Right Click on hard disk-Disable??
i was messing around with virtual disk programs and made 2 disk drives that are not really there. I can't seem to be able to delete them and its really getting annoying. How can i do this?
View 5 Replies View RelatedIs this normal? My disk cleanup shown me a 257GB of files to delete on my 80GB disk. I haven't local network and no external disk. I am using vista home premium with sp1, but this problem was without sp1 too. I attached link (for better understanding) to picture of cleanup.
View 8 Replies View RelatedI am a relatively unexperienced windows vista user using windows home premium at 32 bit on an acer aspire 6920 notebook. I noticed that occassionaly my disk space would drop dramatically without me doing anything. 100s of mbs would just disappear for no reason, so probably being stupid i decided to run the disk fragmenter to try and fix the problem. BUT to my horror i was shocked to find that the disk fragmenter began to eat up my hard disk space big style. I went from 79.7GB to 72.5GB in just over an hour. What the hell happened and can it be fixed? can i get my disk space back? i thought the disk fragmenter was supposed to help your computer not rob it. does anyone else have this problem and can someone please help me? im kinda desparate, i cant believe it.
View 9 Replies View RelatedMy Disk is split into 2 partitions, Vista (C: ) and Data (E, each is about 70 Gb. I do not use the Data partition. I want to delete it and allow Vista(C to use all 140 Gb. The Help pages suggest that if I delete (or reduce the size of) "Data", the free space becomes unallocated? Can I repartition the disk to allow Vista C: to acces all 140 Gb?
View 9 Replies View RelatedWhen I try to open a disk, the driver ejects it and it says please insert a disk into drive. I tried uninstalling and installing the CD RW DRIVER, but it still doesn't work.
View 5 Replies View RelatedI need to replace my wife's motherboard, and I am trying to minimize the amount of change. She is currently running XP, but the hardware is old enough that I cannot simply swap the MBs, because a new board will need a different HAL. I was thinking about installing XP and migrating applications. I was wondering what would happen if I cloned her disk to a SATA disk and installed a Vista upgrade on top of the XP disk. I would run setup and provide the appropriate drivers at the F6 prompt. She has used Vista on occasion when we are out-of-town. I have a separate userID on my laptop that is configured to look as much as possible like XP. The question is whether a Vista upgrade would work on top of an XP image that used a lot of older hardware.
View 4 Replies View RelatedI have an HP DV7 notebook that I recently added a second SATA 500 GB hard drive in the expansion bay. The purpose of the drive is to serve as a data drive. I also intend to store an image of my system disk on this internal expansion drive so that I can restore my system and apps when I am in the field. For most purposes the drive seems to be functioning normally. However, I recently noticed that, without my instructions, HP Updates were installing suipport files on my expansion disk rather than on my system disk and I have become concerned that Windows Updates may also end up on the expansion drive (so far they appear not to have done this). On further inspection in Computer Management - Disk Managment I discovered that when I put the expansion drive into the 2nd bay, my original system disk was automatically bumped from the Disk 0 position to the Disk 1 position and my expansion disk became the new Disk 0.
In Computer Managment - Disk Management the system currently looks like
Disk 0 - F: Expansion Drive - Healthy, Primary Partition
Disk 1 - C: - Healthy, System, Boot, Page File, Active, Crash Dump,Primary Partition.
If I physically pull out the F: drive from the machine the C: drive returns to the Disk 0 position. I am concerned that my system and application updates are going to get splattered across two drives when I want them to remain on the original C: drive. I can find no way in BIOS or Computer Management - Disk Management to assign the Disk and physically swapping the drives makes the system disk unbootable. Am I at risk of splattering my Window updates across two drives? Should I instruct Vista to regard my system disk C: as Disk 0 and how to I do this?