Toshiba Satellite X205-SLi4 Windows Vista Ultimate 32-bit SP2 Does anyone know where to get the latest TI PCIxx12 Integrated FlashMedia Controller ? I went to ti.com but I have never experienced a worse website for the purpose of locating & downloading drivers. I couldn't find it. ( In contrast, nVIDIA's website is so easy it's almost impossible not to quickly find the correct driver. )
View 5 Repliesi`ve got a problem, when i`m trying to install MASS STORAGE DEVICE it appears this message. Compatibility issue between Texas Instruments PCIxx12 FlashMedia Reader and Windows. This problem was caused by a compatibility issue between Texas Instruments PCIxx12 FlashMedia Reader and this version of Windows. Texas Instruments PCIxx12 FlashMedia Reader was created by Texas Instruments Incorporated and is distributed by Sony Corporation.
View 6 Replies View RelatedSeveral weeks ago I installed Vista Ultimate (from Technet) with the SP1 beta integrated. Now I have later version of SP1 in the form of a stand-alone installer. When I try to install it I get a message saying that SP1 is already installed. How can I install the later version of the service pack? I'd prefer not to do a complete reinstall from my original Vista non-SP disk.
View 5 Replies View RelatedSince Vista SP1 can not be integrated into the regular dvd, I wanted to know will they be offering a public download of the integrated install image. I know the currently have this for the technet, msdn and connect subscribers but what about the rest of us who dont have the cash to get one of these accounts?
View 6 Replies View RelatedI have the regular Vista installation DVD, and I have downloaded the full SP1 file (which I installed, BTW). How can I create a "slipstreamed" Vista SP1 installation DVD (equivalent to what was possible with XP)?
View 9 Replies View RelatedEverything is working fine (so far) except that it does not recognize integrated Ethernet adapter at all. On advise of support guys did driver reinstall several time including while in Safe Mode. Even restored factory settings i.e. reinstalled OS. If I run "pnputil -e" then the adapter package is listed but the adapter just does not show up in Device Manager.
Already verified that it is enabled in BIOS. Netgear USB adapter worked just fine after installing vista driver for it. Thinking of putting in a PCI card but that will occupy one slot. Only 3 PCI slots are available - standard, Express 1 and Express 16.
is there any driver for vista of that sound card? I have Vista Ultimate and SP1 doesn?t appears un Windows Update.
View 6 Replies View Relatedmy computer is a hp pavilion a1230n and when i upgraded it to windows vista, the sound card suddenly stopped working! i looked around, and my sound card doesn't seem to have any drivers for windows vista. i looked at the model, and i think this is it :integrated ati radeon xpress 200. my device manager says no device has been installed, but it's there because it was working with windows xp. i was wondering if there's any way i could update it or something.
View 6 Replies View RelatedI have the following setup (see below) and would like to add the unallocated space to the C_drive. Is this possible?
View 5 Replies View RelatedI redid Vista and in my device manager, I'm getting two issues. One is my Coprocessor. It can't find the drivers for this.. Also it's having trouble with the "SM Bus Controller" driver. What exactly can I do to fix these two issues? This is a custom build so I don't have the luxury of having a restore disc or anything like this, which seems to be the common fix for this issue around the net.
View 2 Replies View RelatedI recently added a new hard drive to my system to give me a bit more storage room. All drives in the system are SATA, 2x Raptor 36GB, 1 Plextor DVD burner, and the new Samsung 250GB. The Raptors are currently not in a RAID. What occurs during Vista shutdown? It may give me some more insight into my problem.
During shutdown, the new drive gets thrashed for 3-5 minutes before the system drive updates config and shuts down. Could this be some sort of conflict with the controller? Raptors are SATA 150 and the Samsung is 300. Is Vista writing a system restore to that drive at shutdown? (A friend theorized that, and it sounded logical enough)
I've downloaded StepMania onto my computer so that i can play DDR and I have a game pad and a USB converter too so I configured everything and I'm really having no trouble but when i play the computer is reading the arrows as an analog and not separate buttons this really isn't and issue except for when i am holding one arrow down and i press on the other it only reads one making double notes impossible.
so i went into the control pannel, went into game controllers, and it says that it is a 4 axis 16 button joystick and when i go to properties and press the arrows it moves the axes in the direction of whatever arrow i press and only moves one way when I press both arrows...so my prediction was correct...what i can't figure out though is how to program the pad to read as buttons instead of a joystick axes?
i keep getting a thing where it says i need to install Coprocessor and SM bus controller? I have windows vista 64 bit.
View 5 Replies View RelatedI have Vista Ultimate 64 and my xbox 360 controller. everything says it should load right up as soon as i plug it in, but it's not and i'm starting to get frustrated with it. I've downloaded and installed (running as admin) the xbox controller software and still the guide light is just flashing, my system does not recognize the device but it chimes when i unplug it and plug it back in. in the device manager it's showing up, but in control panel it does not.
View 6 Replies View RelatedI?ve 2 mobo USB input on front of my desktop and others on a PCI USB Controller. If I connect my usb keyboard to mobo USB input the keyboard is avilable before boot, too. Is there a way to get the same result connecting the usb keyboard to USB PCI Controller? (by tools, bios settings, other?)
View 8 Replies View RelatedCard is installed and works fine in my Vista Ultimate x64 system. 4GB RAM. Primary drive is SATA connected to on-board. Storage drives are to be connected to controller card. System boots fine as long as drives aren't connected to card. Once drives connected, system sits at boot-up splash screen w/ knight rider status bar. Never boots.
View 6 Replies View RelatedUnder Device Manager there is a ! next to MASS STORAGE CONTROLLER (MSC). When I check on it, the message is that there is no driver and it is not working properly because it has a problem. I tried searching for a driver with no luck. What does A MSC do and how do I find a driver? There is no brand name listed for it.
View 4 Replies View RelatedI've recently just got vista and was looking forward to some gaming... But alas it looks as though none of my controllers are working. on XP I used to be able to connect my PS3 controller and load up a driver and it would run a dream. I also had a PS2 to PC adapter, but that isn't recognised either. So unless anyone knows any work arounds for these (or maybe some drivers which I haven't found), what is the best controller and/or adapter that will run without any problems on Vista Ultimate 64?
View 4 Replies View RelatedI'm completely stumbed at the moment. I have plugged an Xbox 360 Controller to my computer which is decent gaming pc (can play Crysis on High with high fps) with Vista Ultimate 64. Recently i picked up Wanted, Lost Planet and Dead Space. Wanted keeps crashing at start up until I unplugged it and then it started to work. Lost Planet works perfectly fine... Dead space keep crashing at random when its plugged in and I'm using it to play the game. I have uninstalled and reinstalled its drivers countless times and everytime its under "Unknown" in Device Manager. I've unplugged and replugged it many times, I've installed and reinstalled the Xbox 360 accessories software and nothing seems to be fixing this. I've also used CCleaner after uninstalled to clean the registry.
I know it's the controller itself, because when I use Kb/M, I can play for hours without the game crashing. I have read a lame solution, pretty simply its the lazy solution that almost everyone keeps telling me, which to unplug the controller. But I want to use my controller for this game so that solution doesn't cut it for me. Has anyone ever encounter this problem, if so mind sharing you're solution?
My computer is very slow on wireless so I plugged in and ethernet cable... However it isnt being recognised.... I went to drivers and it says my ethernet controller isn't installed. After searching for very long I found a forum where someone seemed to have the same problem. They were told to download a program called EVEREST. I downloaded this program however I now have no idea what to do with it. Noone is answering me on that forum so I have come here for a release from the stress!
View 4 Replies View RelatedI have a Zalman 9700-NT cooler, which uses a 4 pin connector to connect to the motherboard, but I want it to connect to my fan controller, so I can have direct control to when I want to lower it, only problem is the extension cables that came with the fan controller can't connect to a 4 pin cpu fan connector, they're all 3 pin. Anyone know where I could find a 4 pin to 3 pin fan cable? I've had a look around, but not having much luck.
View 6 Replies View Relatedi recently bought a sweex bluetooth usb adapter and was woundering if i could connect my wireless controller to it. i read on the pack that the bluetooth is at 2.400ghz - 2.480ghz and that the controller is 2.4ghz radio frequency technology. will this work, or is the controller not bluetooth??
View 7 Replies View RelatedI recently got an XBOX 360 controller for windows and connected the USB straight into my PC, 'installing new hardware' quickly arrived and it installed no problem. I can see it in the game controllers on the control panel and it says it is working. However, i loaded up call of duty world at war (which supports the controller) but it just doesnt work........
View 8 Replies View RelatedUsually when I'm playing games, I play with my wired XBOX 360 controller, anyways...its plugged into my front usb port. So while im playing, after 10 min. the PC starts to make noise (humming noise). So i was wondering if theres anything wrong with the controller or the PC (because when i plug in my ipod to recharge for 1 hr it doesnt make humming noise even once). Plz i need a solution and thx.
View 6 Replies View RelatedHad a message that windows (vista) recovered from an unexpected shutdown and it was caused by following: This problem was caused by Marvell Yukon Ethernet Controller, which was created by Marvell Semiconductor.
View 7 Replies View RelatedI was having a small driver problem when connecting the Xbox 360 wired controller to my Vista x64 Home Premium machine. There were two instances of the controller in the Device Manager:
1. Xbox 360 Controller for Windows
2. Controller (XBOX 360 For Windows)
I downloaded the drivers for the controller from the MS site: Download Gaming Software. Once I installed the MS drivers, the device "Xbox 360 Controller for Windows" was successfully installed, but the other device "Controller (XBOX 360 For Windows)" would not install the necessary driver. Even Windows Update couldn't find the appropriate drivers for it...........
Dec 2008 vista security updates knocked out my Marvel Yukon ethernet controller of my hp HDX 9494 lapttop. I am using Vista Home Premium 64 bit.
View 4 Replies View RelatedVista advisor reports no compatibility for Intel SMBus Controller - 2930. This is a viable controller with the latest driver. Will this give me a problem when installing Vista? Was curious why it woud report as no "no compatibility?"
View 4 Replies View RelatedSo I have my computer and my X-Box in the same room, and every time I hold down the controller's Guide button my X-box 360 starts running and if I turn off my X-box 360 my controller of course powers down as well, so I have to unplug my X-Box 360 in order to get my controller to connect to my computer when I hold down my guide button, but of course this seems silly, can anyone offer some advise so I don't have to unplug my system to use my controller with Windows?
View 4 Replies View RelatedI was over my friends house, I was helping to do some PC inspections before he upgrades to Windows Vista Ultimate 64-bit. I did a Windows Vista Upgrade Advisor Scan. The following issues were encoutered with his Alieware Area 51-7500: (Driver Issue)
Manufacturer: NVIDIA
Issue: nForce Networking Controller. This device will not work in Windows Vista. For more information, please go to the device manufacturer's website, Windows Marketplace, or contact your retailer.
I have the xbox 360 PC controller (USB). Upon receiving last Xmas worked fine until my last reformat. Since then every time I run a game to use the controller it plays for a round maybe 1.5 rounds per game then the controller bails, basically shuts down / disconnects. Windows says unknown usb devise detected. It takes 2x or so reconnecting the controller sometimes a reboot to start the cycle over again.
I went a bunch of pages back on this forum and followed a somewhat simular issue. downloaded drivers from the MS site as well as Win Update even used basic CD install. Same issue all the way through however the last attempt following this thread here (Installing Xbox 360 Wired Controller) activated the controller for nearly 45 mins straight then bailed as usual. So I was looking for advice or anyone else whom might have run into this issue.