Just configured according to the steps above but when I do a test email send it doesn't send. I get a pop up error message: Message could not be sent. An error has occured. Thats all it says. No error codes or anything.
View 9 RepliesI get this message after I start my HP laptop.
*Configuring updates: stage 3 of 3 0% complete. Do not turn off your computer After restarting the computer Updates were not configured correctly reverting changes. Do not turn off your computer.
It take almost 30-40 mins to complete all the above process and till it asks me for LOGIN/PASSWORD screen. It does not happen all time when I reboot. This is second time I have seen this in a month.I have not installed any software since I purchased this laptop (1 yearback) Then why its configuring any updates How to fix this Windows version : Windows Vista Home Basic.
I am working on moving over to Windows Vista, in hopes of going officially to Windows 7. I know I should be checking for Windows 7 but I have a full Vista Ultimate 64Bit. I have most of my devices configured but I do not seem to get my GVC modem to install. It is based off a Conexant processor and XP was able to use a "generic" Conexant driver.
View 5 Replies View Relatedhere is what i have tried and worked around in that write up on sleep issues.
step 1) USB KB and Ps/2 Mouse
step 2) configured as per document for hybrid mode (also tried sleep)
step 3) BIOS set to s3
C:Usershtpc>powercfg -a. The following sleep states are available on this system: Standby (S3) Hibernat e Hybrid Sleep The following sleep states are not available on this system: Standby (S1) The system firmware does not support this standby state. Standby (S2) The system firmware does not support this standby state.
1) I can't see Windows update tab as can you see from this picture:Glowfoto :: Photo Sharing and second one I guess this is a very famous problem:
My computer every day without my permission turn off and trying to make some updates, like: 2 of 3 100% after that reloading makes 3 of 3 100% reloads and then writes me: updates were not configured correctly. reverting the changes. It happens every day!!!! I do some work and suddenly it turns off and trying to update something.. I turned off updates. Damn!!!! Vista, Solve it already!!!!! I see it's a very common problem as I surfed through the forums in Net. I already tried many solutions that i've found in net, like: restore point (doesn't work), updates were not configured correctly. REverting changes. , Updates were not configured correctly. Reverting Changes. Do not turn off your computer..
I`m using the windows mail to recieved my e-mails from yahoo. I tried to configured, but doens`t work. Always I recieved this message:
Subject 'oi', Account: 'pop.mail.yahoo.com.br', Server: 'smtp.mail.yahoo.com.br', Protocol: SMTP, Server Response: '250 8BITMIME', Port: 25, Secure(SSL): Yes, Server Error: 250, Error Number: 0x800CCC7D
I am using Windows Mail with Gmail's IMAP configured. I've configured it in Windows Mail as per the directions in the Gmail web site. Regardless, I get this error message every time I try to check my Gmail:
"Header download for the '[Gmail]' folder did not complete. Could not select '[Gmail]' on the IMAP server. You might try refreshing your folder list to synchronize with the IMAP server. Account: 'Gmail', Server: 'imap.gmail.com', Protocol: IMAP, Server Response: 'Unknown Mailbox: [Gmail] (Failure)', Port: 993, Secure(SSL): Yes, Error Number: 0x800CCCD2"
i have just moved from XP to Vista and i like most everything but Office , all i want to do is print but it just seems so complicated , it automatically goes to One Note , and to print something of the Internet say if you booked flights and you want to print the details again seems so complicated , it's i know probably i haven't configured properly but it's very frustrating with XP i just clicked print and that was it ,
View 4 Replies View RelatedMy 2 new vista laptops won't see either the network set up at home or my office (both as 'OFFICE') or vice versa. I downloaded the LLTD and it's made not one jot of difference..Been through the sharing etc. *The 2 lappys see eachother BTW*I downloaded network magic demo on one laptop and the main PC at home and appears the network is correct as they both see eachother . (it even sees the one laptop which hasn't got NM on it) I must say I'm kinda disappointed that Vista and XP are not properly configured to automatically 'see' eachother and have to resort to a 3rd party to do so?
That aside I have three options
1 Dump Vista (my current fav ;-)
2 Solve this problem
3 Buy NM for home/work
If anyone has any input I'd love to see if no/ 2 can be cracked!
I found out that the issue was caused by a conflict between the wireless driver and the sound card. I tried to install the Broadcom Wireless Adapter update, thinking that would fix it? and somehow during the process I uninstalled my Broadcom Wireless Driver? I then went into the device manager and clicked on my Broadcom Wireless adapter and clicked on "update driver software". It runs a search and then tells me that my driver is up to date.
The Device Staus is: This device cannot start. (Code 10): The Driver Version is 4.170.25.19 10/26/2007
but when I try to connect to a wireless network, It tells me "the network adapter "broadcom 802.11n network adapter" is experiencing driver or hardware related issues. Please don't waste our time with comments like "ditch the Mac and get a real computer"
I have an HP Photosmart C6180 connected via USB to an XP desktop computer. I have other XP laptops set up so they can print to this printer throught their wireless connection. However I now have a new Vista laptop and I can't get it configured for this printer through it's wireless connection. Here is what I've tried: Go into Control panel/printers on the Vista Laptop and select Add New printer. I select Network printer and It finds the printer. I then select HP as the manufacturer and it list lots of their printers but not this one. I assume the driver was just not included with Vista. This also has a "have disk" option but my disk is only for XP and before.
I went to HP's site and downloaded the latest complete Vista driver (159 meg). I then ran the software install and when it asks for whether it is a local or network printer, I pick network. But the driver software can't find any network printers even thought Vista could in 1 above. 3. I went to HP's site and downloaded the latest complete Vista driver (159 meg) only this time I saved it instead or running it. Then from the Vista Laptop and selected Add New printer. I select Network printer and It finds the printer. This also has a "have disk" option so I point it to the saved download file but it won't accept it. Apparently this is because the downloaded file is an exe and the software at that point is looking for in ..inf file. So how can I get this to work?
Anyone had any experience bypassing BitLocker (basic mode) using the recovery console (i.e., booting to the Windows DVD or rescue CD)? Based on the documentation, seems like it would work (provided BIOS is configured to boot to CD/DVD drive before the HDD). Having said that, would M$ allow such an obvious attack vector? I don't have a machine w/ a TPM right now, so I can't test this myself.
View 4 Replies View Relatedi keep getting an error message saying that my computer is not configured for the game i installed. i was conned into buying this machine because my older model died. i was told buy the sales person it would play the game...it did noti was then told i had to purchase a new power supply and a nother video card and then it would play. it still has not your help area is a joke ive spent 7 hours trying to get this piece of expensive junk to work to no availe. there is no discussion/blog/community/or help topic.
View 4 Replies View Relatedi have a windows vista home premium installed on my laptop A215-S4757 & i didn't get its recovery but i managed to get a recovery for A215-S4757 (same as mine) from my friend would it work if i used his recovery on my laptop? & would the drivers be automatically configured?
View 9 Replies View RelatedHAWX: which is that the aircraft doesn't stop spinning, i am unable to control the plane. I use a PlayStation 2 USB joystick which has been configured and synced with the PC, so that the every button/joystick works. I am 100% sure that there is not a problem with the joystick, as i use it for other games such as Microsoft Flight Sim X and Test drive unlimited. The analogue sticks and buttons work fine.
i have tried both changing the control setting to keyboard but, once again the problem is still there, the plane doesn't stop spinning out of control...##Is it my controls? My general setting are on default so everything original...i have played around with the setting invert/normal... still the same result
my neighbour has asked me to take a look at her laptop because her laptops keyboard laoyut is wrong.
i have tried to change the regional options but they are already set to uk settings.
i am stumped by this...
Whenever I click the link to open an online radio station windows media player within internet explorer just says Ready - it doesn't even begin to buffer and doesn't play at all. Has anyone else experienced this recently?
View 9 Replies View RelatedAfter updating it says to reboot but after rebooting it says "not configured right-reverting".I tried many times to update but i was not lucky.It does not tell any error code.OS is vista ultimate x64 with SP1.
View 8 Replies View RelatedI've had an odd annoying problem for a while now with explorer... it's probably something in the registry but i don't know what. Anyways, here's a screenshot.
View 7 Replies View RelatedI have had Windows Vista 64 for 2 Months now and of that period of time it worked soundly for about 2 Weeks. I am NOT an irresponsible User, I don't just delete Data, I know a little something about computing, I don't visit or download from dubious sites etc.
1) Without any reason software suddently doesn't work.
a) I installed a Antivirussoftware - after 3 Weeks it suddently didn't work any more (Kaspersky) I couldn't reinstall it.
b) I installed a new Antivirussoftware - after 5 days it didn't work anymore.
c) 4 days later I started to get errormessages "Windows Defender doesn't work any more" - "Windows Hostprocess doesn't work anymore"
Is it absolutely necessary to create a Comcast account in order to send mail? I am having an issue after recently obtaining Comcast as my ISP (i am receiving mail but unable to send). I am formerly a bellsouth.net customer, but would like to continue using Windows mail. I have read and followed several different threads and nothing is working...I am connceted to the internet wirelessly..did not have to install Comcast cd....email scanning is off...what else can I try?
View 9 Replies View Relatedsend successfully when Windows Mail is closed & opened again. There are no error messages.
Running Vista Home Premium on Compaq Presario notebook. This is my first Vista machine and I find its inability to do a "proper" search a stunning shortcoming. Or am I missing some secret setting? Scenario- I want to do a search of my entire hard drive for a file. I only know the extension so I enter .snf and the results are 1 file found. Wrong!First of all, the results don't show me the complete path to the file.
Instead of displaying C:UsersownerDocuments, it displays C:Usersowner. That's it. I either have to flail around and manually check all the owner folders or right click and look at the file's properties. Why won't Vista display the FULL path to the file? Secondly, and this is really disappointing, is that I KNOW there are at least 70 more .snf files on my C drive that Vista apparently can't locate! I never had this search problem with XP. You ask XP and it tells all. Simple. So what gives with Vista? Is there some way to make Vista do a COMPLETE search and display ALL found files with FULL PATHS?
I have a problem on MSN that it doesn't recognize my web cam i know it works because other programs pick up the camera.
I have tried to uninstall the driver and reinstall it but that doesn't work
I have a Dell Inspiron 1520 Laptop with windows vista ultimate opearting system.. the perblem is my cd w drive doesn't opening ..also, when I clicked on computer icon, the cd drive doesn't apper.. I tried to install the drive from dell website , but it didn't worked.. should i format my laptop to solve this problem???..
View 9 Replies View RelatedI've upgraded my ram from 2GB to 4GB the bios reports 4096 but Vista
reports 2048 the exact same value before the upgrade. I'm aware of
why Vista doesn't report all of the add'l memory but in my case I see no
change at all does any one have any ideas?
I wish to UPGRADE (not clean install) my vista ultimate to win 7 ultimate.I put the win 7 (full version) DVD in my computer, setup ran and told me to remove Kaspersky anti-virus.I removed Kaspersky anti-virus and did the requested re-boot.
Now when I put the win 7 DVD in, setup does not run. When I try to double click on the DVD drive in explorer I get a readme text file and that's all.Trying to run: d:setup.exe in the run command on the start menu and at a command prompt does not work either.
I can boot from the DVD but that is only for a clean install, which I don't want to do.
I bought my computer a few weeks ago and I can't find the information anywhere. It just says I'm running Home Premium but doesn't mention if it has SP1 or not. Windows updates haven't said it needs downloading so does this mean it already has SP1? Is there a way to find out?
View 5 Replies View RelatedI have an HP dv6500 laptop running Vista Home Premium. Suddenly the CD ROM has quit working. It doesn't show on My Computer and at one time I got an error 39. I had Vista check the drivers and it said they were good. I'm only good enough on the computer to follow explicit instructions. When I put a CD in the drive the light will come on like it's reading but then goes off and it does nothing.
View 8 Replies View RelatedHandy new thing in Karmic (and Win7 doesn't have it out of the box): From the above cited web site: "Store, sync and share Integrated "Ubuntu One" technology gives you 2 GB of online storage for free. Easily share files between your own and your friends' computers. Upgrade at low cost for more storage if you need it."
View 8 Replies View RelatedI just bought a Hp 8300 with the Windows media center running Vista. If I try and watch the TV, it will pause and need to restart the computer to use the computer. It just locks up. Hp Tech support had me install new drivers, then they had me do the reinstall to original settings.. It worked until I tried to record, then it locked up again and the TV doesn't work again. It will lock up after watching the TV about 15 seconds. I returned the computer and got another one, it does the same thing, Tech support told me I had a bad tuner (on 2 computers?) they sent me a new tuner, that didn't work. Then they said I needed to reinstall the factory settings from the disk, they sent that to me and that did not fix the problem. The computer did not come with a new monitor and I am using a Sony flatscreen, its about 4 years old. Is that my problem? I'm going to take the computer to the store and let them see if they can make it work with a new monitor.
View 4 Replies View Related