Is there a way in Vista to change the memory clock of my GTX 285? The stock speed is supposed to be 2500 MHz but GPU-Z displays it as only 1250 MHz. If I cannot change this in Vista could somebody recommend a simple program to use to set my clock to the correct setting?
View 4 RepliesIn the information on computer clock syncronization with an internet time server I read: "Your clock is typically updated once a week". Is there any way I can change this interval? My computer clock isn't too accurate so I should like to syncronize say at least daily instead of once a week.
View 9 Replies View RelatedRecently had reason to return my PC to the store because it would not post. After weeks the store said it was a RAM failure. I had 4 GB of Ram installed. Eventually I got my PC returned and they had put 5 MB of RAM in .... The problem is my PC can only see 2 GB of physical memory. I have now got three 1 GB and one 2 GB of ram installed. My PC is preforming worse than ever. I am stating to think my PC can only see or should i say use the 2 GB bar for some reason. I have even tried to change the system config but it will only allow me to select 2048 mb.
View 9 Replies View RelatedMemory DiagnosticsIf Vista detects a memory problem in your system such as a faulty RAM module, it will display a notification asking if you want Vista to try to diagnose the problem.Then again you may also recieve the sudden BSOD with the error MEMORY MANAGMENT at the top. You can manually run this tool anytime just typememory in the search box inside the start menu.This tool offers you two options: restarting immediately and checking for problems, or running next time you reboot your machine (the memory diagnostic tool must run at boot time).
Network DiagnosticsWindows Vista also allows you to check the connectivity of your network connection using the Network Diagnostics Framework: An infrastructure and a set of built-in and extensible components that attempts to automatically diagnose and correct network connectivity problems. The usual way to run this check is to open Network Center and click the Diagnose Internet Connection link on the left Vista will either identify ............
Desktop 6 months old and time gone haywire today.Updated it a number of times but keeps going slow>
View 9 Replies View RelatedMy system clock keeps changing, off by 1 hour, if it's really 6:03 it says it's 5:03. I'll change it and then the next time I reboot it may have it correct or it may have it wrong. But eventually I notice that it's back to being off by 1 hour. I am running XP Home edition with all the latest updates.
View 6 Replies View RelatedI just change to Vista x64 and im having some issues with the display image my monitor shows: the text looks out of place, I cannot see the clock, a lot of things missing, cannot use the right mouse button. i add a photo showing the problem:
This always happen when Ive been using the PC for around 1hr or more. If I close the explorer.exe application and run it again (the explorer.exe app) the problem goes away but after a while it backs. I already install the latest drivers for my graphic card, the refresh rate of the monitor its ok... Im running out of ideas and I been looking all day for a solution, you are my last chance
I had 4GB physical memoryon the PC. With Windows vista 32 bit, available memory is shown as 3.3GB. I asked and was told that only under 64 bit windows, will the available memory be 4GB. When I upgraded to windows 7, I chosed 64 bit, but the available memory shown in the system is still 3.3 GB. Why is this and is there a way to make the full 4GB available? It's possible that my video card is using RAM instead of its own RAM. If I install a video card with its own RAM, will the full 4GB be available?
View 9 Replies View RelatedI have a problem with Vista Ultimate x64 SP1, I always seem to lose all my free RAM within an hour regardless of system activity, even while idling. I have noticed an svchost.eve process runs each time I reboot which seems to bloat constantly although when I close it down it only frees up about 800MB, what's happening to the rest of my 8GB??? When I launch Task Manager it says I'm only using 10% Memory but free RAM sits at 0?!?!
View 9 Replies View RelatedI had 4GB physical memoryon the PC. With Windows vista 32 bit, available memory is shown as 3.3GB. I asked on usenet and was told that only under 64 bit windows, will the available memory be 4GB. When I upgraded to windows 7, I chosed 64 bit (I did clean install of course), but the available memory shown in the system is still 3.3 GB. This is show in both task manager under performance->Physical memory->total, and 'property of My Computer'->Installed memory (4GB/3.3 GB usable)........
View 7 Replies View RelatedI just got a new HP pavillion dv3 with vista home primium. But every time the computer went to sleep the clock and date stopped. I could not find out why, tried to remove sync with internet but nothing helped. But then we tried to correct the time and date ind bios and now it works Don't know why but it does. So if anyone else have the same problem I think it is worth trying.
View 0 Replies View RelatedI am having issues with my clock. It seems that everytime I close my laptop the clock freezes in time. When it is open it also seems like it loses time. I have to continually update it to get the correct time but if I close my laptop or if my internet drops the signal, it stops working.
View 9 Replies View RelatedI have a laptop with vista on and lately whenever I turn the computer off it resorts to October 2006 wwhen I turn it back on. If I restart the computer it's is ok, it only happens when i turn it off. I think it maybe the mobo battery, but I don't want to open it up if there's an easy remedy.
View 5 Replies View RelatedI was running Atomic Alarm Clock on x86, but that does not seem to work, and I see by a thread in these forums, that Chameleon clock has issues too. So, can anyone suggest a customizable clock, one that can prompt the time servers much more frequently than the built in clock, that does run properly on x64?
View 5 Replies View RelatedI just got a new computer. HP G60-235DX. I'm going out for vacation and I want to massivly underclock the 2Ghx Core Dual Processor so it can last longer. Vista's current power save mode increases the battery life but not as long as I want.
I was downloading CPU clock Monitering software and I noticed that Vista's built in power options actually changes the clock speeds but I can't find an option to let me manually choose the clock speed. For High Performance, it is 2 Ghz (as expected). For Balanced, it is 1.6 Ghz, and Power saver, it is 1.2 Ghz. I want to under clock my notebook to 600 or 700 mhz. What should I do. My bios, does not support over/under clocking.
Does anyone know how to use Vista's built-in power options to configure the clock speed? If not then, can you tell me some programs that can with a little explaination on how to use them? I've used a few and they are confusing.
I am quite a big fan of Chameleon Clock. I believe it's a brilliant enhancement to the normal clock that comes with Windows. I have been using it with XP Pro (x86) all the time. However, since moving to Vista Ultimate (x64), Chameleon Clock no longer appears on the taskbar. It's running fine, it still does all the functions (like alarms, reminders, clock chimes, etc), and I can still access it by hovering over the normal clock. But it just does not show the clock itself. I've just got the normal Vista one, which really quite defeats the point of having Chameleon Clock in the first place.
I've put up with it because the most important functions still work, but I do not understand why it will not appear. I have done nothing different to XP, and I have tried loads of different settings. The website for Chameleon Clock says it's Vista compatible, yet it does not seem to work for me. Maybe perhaps it's because of 64-bit? I do not know... Has anyone else got Chameleon Clock to show on Vista Ultimate x64?
Vista x64 I had the orange calendar and old style analogue wall clock appearing on the upper right hand side of the desktop. They have disappeared. However, for reasons of saving resources, I have set Vista to boot with Selective Startup only, so this may be the reason they have disappered. If so, which Startup item (or Services item) should I tick to make them reappear.
View 9 Replies View Relatedam using Vista Home Premium on a 9 mo. old eMachine...and want to know: How can I get the clock on my taskbar to shown the seconds along with the hour and minute?
View 4 Replies View Relatedi want to install clock, calendar, weather,...the same picture. how to do?
View 4 Replies View RelatedMicrosoft will end OEM and shrink-wrapped sales of Windows XP on June 30, 2008, forcing users to shift to Vista. Don't let that happen! please go to the link below and sign the petition to Save Windows XP. After you've done all this
View 9 Replies View RelatedYesterday the UK time changed by one hour (back) to standard time. The
clock on my machine (Win 7 x64 did not automatically update, as in previous
versions. Anyone else having this glitch? The curious thing is a notice at
the clock acknowledges the change of time and advises the clock was
corrected, which it wasn't .
__________ Information from ESET NOD32 Antivirus, version of virus signature database 4542 (20091026) __________
The message was checked by ESET NOD32 Antivirus.
[url]
Is it possible to have my tray clock showing date aswell? Like it was in xp?
View 9 Replies View RelatedAs far as I can tell the Vista clock does not take into account that Great Britain time is UTC+1 during the summer. It is currently showing UTC and London time being the same.
Is there a setting I'm missing? I have my local time set as Pacific time and
UTC is off by one hour as it is using Great Britain time as UTC.
Every time I log in, after a few seconds, this globe-like icon appears on my clock bar, and the bar freezes, including the menu. I canīt open anything, I canīt even change between opened software. The only thing that works is whatever program Iīm running, which I can continue to use with no problem, but once Iīm done, I have to signout the user to be able to turn it off. I press ctrl+alt+del, and the program administrator opens, but the computer doesnīt let me access it, since it freezes. I booted in safe mode and disabled everything on start up, still happens.
View 9 Replies View RelatedI was just wondering what the benefits of over clock is. Iam runing a amd 2.6 quad core the system tells me i can take it to 3.2 my cpu temp is between 40 and 42 at idle it can go up to between 54 and 58 at load
View 9 Replies View RelatedI'm considering a new CPU with VISTA for Small Business. To run efficiently would you recommend 3GB RAM? How about CPU processor and clock speed? Also, what are your thoughts on INTEL vs. AMD?
View 5 Replies View RelatedI have Windows Vista Home Premium on an HP Pavillion DV9000 laptop and since day one, the task bar clock has NEVER shown the correct time. The correct time zone is displayed, I have disabled the internet updates and I have set the correct time who knows how many times. However it can take DAYS for it to move forward minutes. sometimes, it does a time warp and goes back in time. The BIOS clock has no problems, displays the correct date and time every time, but it is now beginning to bug the heck out of me.
View 7 Replies View RelatedA word of warning if you're like me, own a Dell, Lenovo/IBM or HP notebook. Do not install any version, variation or anything related to Ubuntu on it. It WILL fulk your machine good and proper. The as-of-yet unfixed bug 43745343802 in Linux kernel for Ubuntu which corrupts the real-time clock, and causes your machine to boot simply with the message "Time-of-day clock stopped", leaving you unable to get into the BIOS, boot from external sources, or do anything even remotely useful with
your notebook - effectively bricking it. The fix? You can rip open your notebook and extract the CMOS battery, or call manufacturer to see how good warranty is. The awesome thing about that bug? It's in Dapper, as you can see.. but I just got it in.
Edgy, and according to the comments, it was there back in Breezy as well. The next cu**nt who even breathes Ubuntu in my presence will receive a punch in the face. Jesus fluking Christ. In my entire 23 year history of fluking with PC operating systems, not ONCE have I ever come across one capable of bricking your hardware. I'd like to support the Ubuntu developers, because from their mission statements and other crap, it sounds like they're trying to do the right thing - but folk me, a bug this serious possibly spans three releases and still isn't fixed? One that, to date, doesn't appear in other Linux distro's? Get your fluking act together!
I don't have a screen shot of the BSoD, but I did write it down word-for-word. A problem has been detected and windows has been shutdown to prevent damage to your computer. A clock interrupt was not received on a secondary processor within the allocated time interval. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
If problem continues, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup options, and then select Safe Mode................
I am fairly new to the forums, and VERY new to Vista x64. The machine is new, and I was trying out some apps and games, I was in Secondlife when I got an error messege saying I was out of memory and needed to free up memory. I shut down the app and restarted it. Runs but I watched Task manager and saw my free memory down to almost nothing after an hour or so. The cached seems very high.
I did alittle research and decided to set a second page file on my 1TB hard drive, (OS is on the other HHD's )( regulated by system for size ) I'm not really sure whats going on. Example of just task manager and this page openis attached. Again, any help would be great in getting the memory set up on here optimal.
I have 6gigs of DDR3 memory at 1600hz. Running on Vista 64bit and every now and again my memory performance just maxes out. The problem can occur around the time when I am installing something but I dont think its always this way. I have read forums where it could be the hardrives performing self diagnostics. I have all the latest patches for vista.
View 7 Replies View Related