Network question -- I cannot "see" another computer on the network. It knows the laptop name [from the new computer] but it is applying it to windows media. The laptop knows the new computer's name but it can't open it or "see" anything about it. Both machines are working off the same wireless network. Both are discoverable. Neither [yes, I know] has a firewall turned on.
View 4 Replies
I have three pc's on my wireless network. I looked at my network places tojight and noticed a fourth. I clicked on it and it said windows cannot access it. What do I do?
View 8 Replies View RelatedI have vista on desktop with router and am trying to network (wireless) with another desktop running xp. The network connections are good / router recognizes both computers. Internet connection functional on both computers. The vista computer will only "see" the xp intermitently. When it is available, I tried to map the xp drive from vista to no avail. Error message said the computer name was incorrect although it was correct. Both computers are in same workgroup.
View 6 Replies View RelatedI have a windows vista home premium 64 and a mac os leapord and both connected to same router/network. IP addresses are fine. I can connect to shared folders/drives from the pc to the mac, but the mac does not show up in the network folder on my windows vista machine.
View 4 Replies View RelatedQuite a problem here. I noticed my internet [T1, I have a box with a light that flashes when in use] was going nonstop at a fast rate, even when my computer was idle. So I went and checked my network settings. My computer is alone, not on any networks, but "JACQUELINE-PC" and a media version of that is showing up on my network. My network was private and I changed it to public, seeing as Windows Help said that is safest for lone computers. I also added a password to my windows computer account. I tried to turn "file sharing" off, but it said it was controlled by my firewall. I use Nortons
Internet Security for firewall and I havent been able to find any option to
disable file sharing in it.
i have 2 computers and one laptop in my home the main computer is xp, laptop is xp. the hp printer is attached to main computer. my daughters computer is vista. i can see all computers on the network and had no problem in adding the printer to my xp laptop, but cannot add the printer to the vista computer. i have norton on all computers and have removed it and still same problem. when adding the printer on the vista computer, i can see the printer but when i add it produces this error "Windows cannot connect to the printer. Operation could not be completed (error 0x0000046a)"
View 5 Replies View RelatedI'm sharing my PC internet connection to my Apple Mac Pro now i am starting to use the mac a lot more and was wondering if there was a way to put my PC to sleep but still have the connection alive for my mac pro to stay connected to the internet.
View 8 Replies View RelatedI have windows vista home premium. And i tried setting up a home network, which worked fine, i can see all shared folders on my network and i can access the said computer from another computer with no problem.
However, whenever i try to open any folder on the network , even if its my own (from said computer) i get blue screen, windows reboots, windows says it found a problem it cant fix, and everything else seems to be working fine. It happens with ANY folder on the network location, regardless if it has anything in it. I scanned the computer for viruses, according to my kaspersky its clean. It used to work in the past, i used to be able to access network folders with no problem.
In the network map I can see the two computers, the router and the internet symbol. File and printer sharing is on for both machines but the other machine which is visable cant be connected to? Firewall permits file and printer sharing as well.
Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:UsersBrett Jones>ipconfig
Windows IP Configuration
Wireless LAN adapter Wireless Network Connection:
Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::612a:b302:fdd7:297d%18
IPv4 Address. . . . . . . . . . . : 10.1.1.4
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.1.1.1....
when I open my network I do not see 2 of 3 computers on the home network. I have 2wire, the main PC supports the printer. I use to be able to open all computers.
View 4 Replies View RelatedI have a "Lenovo SL500" thinkpad laptop, Running Vista Business 32bit. And a costum built Desktop PC running Vista Ultimate. Both password protected, but with the same password. I would like to transfer files vire the network. Now this wouldn't be a problem if the Reciving computer was not password protected. All I would do is open "Network" located in the start menu and then do the folowing "Network\". To find computers name: open start menu, right click on "computer" and press "properties" But because the reciving computer is password protected I can only see "Printers" I need security so I cannot remove passwords OR open my computer up for file sharing!
The only other options I have got are: Bluetooth: This Ok but is slow and you are needed on both computers for accepting, entering passes etc. (I would preferrer not to!) Server: We have a Server but this means uploading to the server(could take ages), Then Downloading the server(thats double the time). (Again I would preferrer not to!) Memory sticks: Basically a simaller problem to the server! (Once again I would preferrer not to!) So basically what I am asking is: Does anyone know an application/progam that deals with network file sharing (That will do what I am asking for) Or a hidden option in vista to allow this Or something?
Have a small network consisting of one Win XP Media Center Ed. and one Vista home premium (and an Internet router). The Vista crashed and was restored to factory and apps reinstalled, etc. Each computer has dedicated IP address, and each runs a version of Norton Internet Security. They are in the same workgroup. Prior to the Vista problem, all was generall well. Now, the XP seems to lose network connectivity to the Vista computer when the computers are turned on in the morning. This is important for many reasons, including that the XP uses a printer attached to the Vista for most of the XP's printing needs.
I have set up a user on Vista that matches the user on XP, and have set the NIS on Vista to allow all connections to the IP of the XP box. And all is well until that reboot. There may be more to that, but in the few days the rebuilt Vista has been up, that has been the story. I have been able to restore the connection by launching Network Places, and searching for the name of the Vista computer. It so far does not show up in the network view until I do a manual search using the computer name. Then when it comes up and I double-click on the Vista C: drive, I'm prompted for login info, which I give and then I get connected (why is this not automatically done for me?). I've also mapped a drive to the Vista and set that for "reconnect at login."
does creating a network bridge on my computer allow me to connect another LAN cable into a second device straight from my computer? because i want to connect my LAN cable into my PS3, but the cable is too short to reach the PS3. so i wanted to have it so the internet connection goes from my computer into the PS3. if thats correct, what component would i need to make it happen?
View 9 Replies View RelatedI can't log into my computer by normal mode,safe mode and safe mode with network.This started when i log into my computer and start a game and attempt to connect to my BroadBand connection.While connecting, my Local Area Network is undentified so i restart my computer and i can't log in till now.
View 7 Replies View RelatedI've just recently encountered a problem connecting to the internet with my notebook and when I check to see what was wrong my computer says I'm not connected to any networks. So when I try to connect my computer doesn't show my wireless network it says a cable is not plugged into the network adapter 'local area connection". However everything is plugged in and my mom's notebook has no problem. Also it says that my computer doesn't have a wireless adapter installed and configured but it does and when I go to the properties it says the device is working properly. I don't know what to do anymore. I've restarted my computer and unplugged and replugged the cable and disabled and enabled the adapter.
View 5 Replies View RelatedI click on view full map in Network and Sharing center on Vista, and I can see all the XP computers (because I installed the LLTD fix) sometimes I can click on the computers, sometimes I can't. I don't know why that is. Next, clicking on "View computers and devices" only shows my Laptop and router. Sometimes the other computers show up too, usually after a few tries or refreshes. When the XP computers do show up, and I double click to try to view the shared folders, I get the following error:
"Windows cannot access \Computer Name. Check the spelling of the name. Otherwise, there might be a problem with your network. To try to identify and resolve network problems, click Diagnose. Error code: 0x80070005 Access is denied."
Clicking on diagnose says this: "Windows did not find any problems with this computer's network connection." My firewalls are set to allow computers on the network. I've even turned them off and just let Windows Firewall do it's thing. I really don't understand the spelling error. I think if that can be fixed,
the network would work just fine.
I have Vista x64 and I have read threads on this for weeks and can't fix it. I have file sharing/network discovery on, private network, password protection disabled, my shares set to everyone and everyone is on the same workgroup. My problem is that the x64 Vista computer will not see any of the XP (x86 or x64) computers and they can't see it from the Network Neighbourhood. However, if I type the IP address of the XP computers I
can access them. On the XP computers if I type the IP address I get an error that it isn't accessable and I might not have permission. However, if I type \192.168.0.100share or any of the other share names I access it just fine. pinging works too by IP but not by name. If I boot into the x86 install of have of Vista I can access XP computers from Vista and the Vista from XP by name and everything without typing any user names. The only differince between the two aside from x64 and x86 is that x86 isn't patched past SP1 as I don't use it often. Lastly after installing that XP patch I can see the x86 XP computers by name from the network map feature on Vista, still can't access them by name though...
I'm using Vista Home Premium and Windows Update tells me I'm up to date.
Every so often the Network icon in the System Tray tells me that it is not connected to a Network (by displaying a red X) though I can clearly see that I am.
I'm trying to network my new Optiplex 740 with Vista Business (32bit), and Norton 360, to my old Euro PC with W2K Pro. and SystemWorks, using basic Belkin /Realtek cards and yellow ethernet cable. My broadband connection is through my old machine and works perfectly, as does the network card installation.
My new machine also indicates that its card is correctly installed and functioning correctly. BUT the Network and Sharing Center window shows this computer as linked to an Unidentified network and no connection to either the other computer or broadband connection.........
Before the computer actually came to the point of "shuting down just before it tried to load the o/s" it literrly kept shuting down on its own randomly for a week or so. Then the blue screen appeard with this error: 0x0000007BC , 0x84C5DBA0, 0x0000034, 0x00000000, 0x00000000 "Run CHKDSK /F and check for Hard Drive Corruption and then restart your computer"
Basically it's telling me the DRIVE is corruptet! Well, I plugged that SATA 2 HDD into my other computer (windows xp), detected it correctly and actually formated the drive and reinstalled XP on it without any types of problem. Does it still mean - SATA 2 is corrupted or broken!? How about the RAM then ... indeed, I did run the MemTest for 7 times and no errors were found. So the RAM are ok in this case, or am I wrong?! Maybe it's the PSU... ermmm no that cannot be 'cos the computer never shuts down, if I leave it run for (e.g 5 hours) and even if it's comes to "overheating" that cannot be the case eather, as its *again" never shuts down when you leave it run on the power.........
I have bought DD a laptop for Christmas and thought I'd get it all set up beforehand. I already have a wireless network here at home, with 2 desktops running xp) and a macbook, they connect via a belkin wireless modem router. Vista however, doesn't even find a network, I get a message saying the network cable is nplugged. Its wireless enabled and the switch is on
View 9 Replies View RelatedWhen I reboot my computer through Windows the computer shuts down correctly, but then the monitor remains black and the bios starts beeping out the error code for "VGA not detected". Why would this be? I am forced to press the power button and wait from 5 to 10 minutes to reboot normally. (I'm using Windows Vista Ultimate x64, have an ASUS P6T Deluxe motherboard and a Gigabyte Geforce GTX 280. 800 watts ZION power supply) Is this a BIOS settings or GPU problem? I already reseated the GPU. Could it be a power supply failure?
View 9 Replies View RelatedHow do I transfer my quickbooks 2007 data on my xp computer to my new vista x64 computer with quickbooks 2007? Can this be done? If so how do I do it?
View 5 Replies View RelatedOne usb ethernet adapter for internet connection through an old router, one for a Linksys Wireless G router hard wired to remote security cameras sums up the problem where one cancels the other out. This is a problem for XP, Vista, and even 7 beta while the primary system still runs XP. The dsl connection is through an old dsl setup using a usb adapter while the Linksys pci adapter card or usb adapter once installed becomes the default network adapter.
The wireless router itself is plugged with the RJ-45 ethernet adapter directly into the main controller/dvr box for live wireless feed to the main XP system or this one as a second means along with direct plug in to a tv set in the room where the main box is located. In XP, Vista, and even the later 7 beta the same problem of running two adapters without conflict is the main question needing a working solution. This thread is intended to tax the most network familar people here.
The landlord runs the main XP system with eventual plans to upgrade to Vista while this system serves as a testing machine a good deal of the time explaining multiple OSs as a rule. The router and adapters are in working order not seeing any defects while canceling the original dsl adapter out when installed. That takes out the online connection in the process.
Bought a Freecom Network Drive (LINK) from PC World today and got it set up and it seemed to be working fine on my Vista computer until I tryed to get it set up on my XP computer. It seemed to get setup ok but then the whole thing just stopped working. The hard drive spines and it works fine when plugged in as USB device but when trying to connect it to the network it simply does not show up. I have a Belkin G+MIMO Router and the Network Hard Drive is a Freecom Network Storage Hard Drive 250GB
Just returned from holiday and while we were away I changed my laptop network in vista from private to public as advised and the internet worked fine. Now at home I can’t connect to my router, and I get a message saying that the details held on the computer is not the same as the router. Also there is no “customise” function being shown on the network and sharing centre screen to switch back to private network. I’ve tried everything to set up a connection, even a new one, but the same message appears all the time.
View 7 Replies View RelatedI would like to export my contacts from my computer to my second computer. Both computers use Windows Mail. I tried exporting the contacts as CSV and vCard files. Using both methods, I was able to import my contacts into my second computer but they weren't neatly organized in files: i.e. business contacts, personal contacts, family, etc. Is there a way to export my contacts so they are still in the correct files and are neatly organized?
View 9 Replies View RelatedI have a Vista Laptop that needs to access a printer on an XP computer in my sister's law office. I'm having trouble trying to even have the XP computer show up consistently on my sister's computer. I can ping it every time from the command prompt. I have all firewalls unenabled on both computers. Identical user accounts on both systems. File and Print sharing set up on both. The Link Layer topology is present on the Vista computer. When the laptop sits for a while the XP computer will show up on the map; but, Vista comes up with an error message when I try to access the XP computer.
Beyond that, the map will lose the XP computer on occassion. The Vista computer can access the internet well enough through the router. At this point I can't install the printer on the Vista computer for not being able to access the XP computer from Vista. I've networked Vista computers before on XP networks, and this is the first time I've encountered this problem. Additional info; net view will not show xp computer. Workgroup name is the same for both XP and Vista computer. The restrict anonymous registry key on the XP computer is set at 1. Was originally set at 0. (Norton's Systemwork altered setting)
Can I set up network of two computers with Windows Server 2008 and Windows Vista Home Basic with FireWire? How both systems will detect connection of two computers with FireWire cable? Does that connection make possible file exchange?
View 6 Replies View RelatedI have a problem: I have a Windows 7 computer that is part of a Domain. By using System Restore, Windows has managed to ruin the trust relationship with the domain. I use a domain logon and am the only administrator on the machine (the Local Administrator is disabled). I cannot log in normally, due to the trust relationship issue. If I disconnect the network cable while logging in, I can (cached credentials), however I cannot change any UAC-protected settings because if I enter my credentials into it, connected to the network or not, UAC will simply show an error "This operation requires elevation". Nothing I try will work.
I cannot disjoin the domain, because those controls are protected by UAC. Logging in from a remote machine using my credentials will give me "Access is denied". Resetting the computer account in AD has no effect. I cannot format and reinstall because this laptop does not boot from CD by default and requires me to install a program to change BIOS settings (don't ask, it's a Toshiba, the usual way is broken). I cannot install this program because I am faced with yet another UAC prompt. I cannot remove the harddrive because of the laptop's design. how to salvage this computer?
I have been searching far and wide for a solution to my networking problem. I have 2 computers that i connect directly to each other by ethernet cable. Both computers also connect to the internet via wifi. So, on each computer, I have my Wireless connection, and the 'unidentified network' link between the two computers. The problem is that the 'unidentified network' settings never save, so when ever i restart either of the computers, I have to make the unidentified network private again, and there is no way that i can see to actually save the unidentified network settings in a profile. Also, to prevent the computer to computer connection from broadcasting over the wifi connection, i have to disconnect the wireless from one of the computers. I have tried making the wifi a public network and the ethernet connection private, but it never seems to work. anyone out there know what i can do?
View 4 Replies View Related
