XP Install Has Screwed Up My Partition
Mar 23, 2008
I had Vista installed on my Sata hdd(500gb), and decided to install XP on an Ide hdd (120gb). I had changed the priority of the hdd in the bios to the Ide and installed XP. Now xp is running fine but I cant see the Sata hdd in my computer, I checked computer management and it shows the sata as 104.01gb unallocated, 811.57gb healthy unknown partition and 259.39gb healthy unknown partition, a bit confusing seeing as its a 500gb hdd. So at first I thought I had wiped the add,so I checked it out using Linux to see what had happened, and for somereason the file system has been changed from Ntfs to raw. I have used a couple of apps to try and see if my files are still there, they are but I have no way of backing up 450gb worth of files.
View 9 Replies
ADVERTISEMENT
Jun 19, 2009
Okay so I'm working on a gateway LX 6810-01 I was having a hard time getting the screwed up hard drive fixed with a fresh OS install.
After about 3-4 days, I finnaly got Vista Ulitmate x64 on it and all seemed well. I installed all the drivers from the gateway site for the lx 6810-01 and just left it running for about 10 minutes.. then it just shut off on it's own. I immediatley suspected a heat problem and downloaded a program called speedfan to moniter each individual core and the gpu's temperatures. It also lists other information such as Fan rpm's and Voltage readings.
With Speedfan, I noticed the temperatures were way WAY above nominal, around 64c just ideling. I saw the GPU get up to 73c with a game open before everything froze and the cores heated up enough to shut the computer off moments later.
The computer worked pefectly fine a week ago, he got some kind of virus on it and thats why we had to reformat it with the same OS it had stock.
The only thing we did with the hardware was take out the hardrive and put it in my cpu to try and run a virus scan on his hard drive as slave. The fans on everything including the GPU are all still running so we can't figure out why it would be hot all of a sudden. We have tried cleaning out all of the dust and to no avail.
View 9 Replies
View Related
Jul 29, 2009
I have a PC that causes trouble with Vista (old software does not run and stuff), so we want XP instead. My plan ist to install xxp into C:WINXP side-by-side with the C:WINDOWS of Vista, and remove vista afterwards. So I don't have to split the partition and can leave data untouched.
View 9 Replies
View Related
Aug 24, 2008
So I had a virus and long story short I was made to restore my system from the OS Disc that came with my laptop. Somehow I royally screwed things up and deleted my back-up restore drive D. All I have in the Computer Folder is Drive C and the D drive is now my DVD/CD drive. In addition all I had when Windows started up was an icon for the recycle bin. It seems everything is wiped out. I backed-up my personal files but none of the software. So, how can I fix this? How do I create a new back-up restore partition?
View 7 Replies
View Related
Jun 2, 2009
Would it be possible to have Vista installed in ext3 partition with the help of e.g. Ext2 Installable File System For Windows? I know that fat32 would be much faster than NTFS (which is funny because NTFS was meant to replace fat12/16/32) but I have larger files than 4gb so that's not an option. Ext3 would be even faster and it's limit for a single file is from 16GiB to 2TiB.
View 9 Replies
View Related
Sep 21, 2009
I was in the process of trying to get internet access on my Xbox 360, so I plugged it into my laptop (Toshiba Satellite L305-S5921) and as soon as I did my wireless connection went from full connection to either local only or identifying (one of the two). So I no longer have internet on not only my laptop, but I still can't figure out how to connection share to my Xbox. This happened before, but somehow it fixed itself? I tried reinstalling the wireless drivers to no avail; it didn't fix the problem. So if anyone can help me diagnose this problem, This is pretty urgent because I need to be able to use the internet for homework.
View 7 Replies
View Related
Jul 29, 2009
If you have Vista Home Premium on your system can you use the upgrade
Windows 7 home premium to install on a separate partition and have dual
boot instead of installing over Vista?
View 9 Replies
View Related
May 8, 2008
Can vista 32 pro install on an ntfs partition formated with 16k clusters. If so how can I format the drive to 16k clusters using the vista boot cd, are there any steps or commands I need to do during the boot sequence? And are there any "stable" third party programs or suggestions so I don't have to dump the current os that is on the drive? As I believe that the image file restores the cluster size.
View 6 Replies
View Related
Mar 31, 2010
i m trying to find a recovery disc for the acer aspire m1610 system. i totally screwed up my hard drive and have lost the entire recovery partition. if any1 has a m1610 i would appreciate if you could get an ISO image from the eRecovery application. i tried installing eRecovery back onto the system but everytime i do, an error pops up and says "Not D2D System, eRecovery cannot be installed."
View 5 Replies
View Related
Aug 23, 2009
When doing an install of Win 7, Does the entire drive get wiped, or just the C partition? I'm thinking of course of maintaining the recovery partition.
View 9 Replies
View Related
Sep 12, 2009
I am having some problems with my drivers so I am trying to delete the partition on the operation system drive and do a fresh install, operating system and drivers. However, no matter what I do I cannot get my computer to boot from the windows vista DVD so I can delete the OS partition. Here is what I already tried:
- My BIOS is set to boot from CD ROM first
- I have tried both DVD drives
- I verified that the DVD is good by trying it in a different computer where it will boot from the DVD drive
- The DVD drive works because I can initiate installation from the DVD drive. But since it isn't on start-up, I cannot delete the partition and all the drivers.
How do I get this dang computer to recognize this DVD on boot?
View 3 Replies
View Related
Feb 9, 2010
well i have a laptop with win vista 32 bit already installed on one partition.i have totally three partitions.one with the OS,one with the recovery partition and one just for my files.all three are on the same hard drive.now i recently got win 7 64 bit and want to do a clean install.can i do it without losing all the data in the recovery and other partition???
View 5 Replies
View Related
Feb 27, 2008
I bought the Vista Home Premium Upgrade and when I went to install it, I chose to do a fresh install. When my PC restarted the screen was blank for a really long time, then the mouse arrow popped up and the screen was still blank. I checked the Hard Drive light and it wasn't blinking. I put my ear to my PC to see if I could hear it working and it was just running normally. I turned my PC off and I can't install Vista now. It says to start the installation from XP with the key that I'm using.
The problem is that XP came with my PC in a partition of the hard drive. I can't access the partition anymore. I hate the fact that I didn't recieve a disk with the operating system that my PC came with, and I will never buy another PC with the restoration and installation files in a partition. I can't even format my hard drive in BIOS because of the way it's set up. s there anything I can do other than calling the company to get an XP start up disk which I was told will cost me $40-$80?
View 9 Replies
View Related
Dec 27, 2008
I have -Dell XPS 730x with 6 GIG DDR3 RAM, Intel i7 64 bit Processor, 500 GIG disk,
I am running -Windows Vista Home Premium 64 which was preinstalled on the cpu
I want to -Dual boot between Vista64 and Windows XP32
So far -I have done everything to this machine from creating a virtual window in Vista64, to going into the command prompt from vista boot disk and running diskpart to clear hard drive.
I currently have -Two partitions on one disk. Primary 200GIG and Healthy 265GIG -Windows Vista Home Premium64 installed and running
The problems im having -every time try to boot from CD and run the windows xp setup, it is UNABLE to find ANY HARD DRIVES!
I have researched that
- I must have the disk partitioned
- Windows XP must be installed first
- I have to play with the boot.ini
- If i install vista32 it will be more successful
The errors I have gotten -STOP: 0x0000008E - i researched this and it said one option is to take out the excess RAM
I will be happy if - By the end of this weekend I can successfully run XP or both OS's in dual boot.
I need to go through all this trouble because - Digidesign has not written software for 64 bit proccessing yet. I need to make music.
View 9 Replies
View Related
Apr 16, 2009
i m trying to install vista and i get this error message: I have a partition of 40.8 GB for installing vista. I m using a 80 GB hard drive.
View 9 Replies
View Related
Mar 29, 2009
Am trying to install xp on a new laptop that already has vista. Have made another partition using vista disc management. I boot to xp disc and go to install but cannot choose a drive or partition as box remains empty and nothing shows.
View 8 Replies
View Related
Mar 23, 2008
I had already upgraded my xp media center to vista home premium. I want to reinstall it but don't want 2 partitions if i don't need them. xp was backed up along with other program that came with the computer at time of purchase on partition D: FAT32 my question is do i need this or is it safe now for me to delete it via computer management I want to run my computer partition free.
View 5 Replies
View Related
Jul 25, 2009
Have my system built and everything seems ok. Post is good with no errors. Only (1) HDD and DVD connected now. During windows Vista 64 installation I eventually get the message "WINDOWS COULD NOT FORMAT A PARTITION ON DISK 0. THE ERROR OCCURRED WHILE PREPARING THE PARTION SELECTED FOR INSTALLATION. ERROR CODE 0x80070057". Do I need to update BIOS? HDD & DVD/CD show in BIOS as SATA 1 & SATA 2 by there names. So they are being recognized.
View 6 Replies
View Related
Oct 5, 2009
I recently acquired a Dell Studio XPS 435 desktop with Vista Ultimate as the OS. My plan is to upgrade to Windows 7 in the next couple of months or so. Therefore I won't need the Vista recovery partition on the hard drive. I am trying to eliminate it and add to the C: drive partition. Looking at my drive 0 in disk management I have from Right to left a C: partition 683Gb NTFS with the usual Healthy (System, Boot, Page File, Active, Crash Dump, Primary Partition). Directly to the left is the Recovery or D: drive which is 15Gb NTFS marked Healthy (Primary Partition) and finally to the left is the last partition of 71Mb marked Healthy (EISA Configuration). No idea what that is. Right clicking in the Recovery partition gives several options including: format, shrink volume, extend volume, delete volume, mark volume as active, change drive letter and paths, as well as help.
My question is how to remove the recovery partition and then extend the C: partition. My first thought is to format the recovery partition, delete the volume and then right click the C: drive partition and extend it but I really need some advice so I don't screw up the whole disk. For instance I have no idea what if anything hapens to the drive letters.I think maybe what I am calling partitions are really volumes so you can see I am over my head here.
View 6 Replies
View Related
Mar 16, 2009
i want to extend my system partition on Vista, and my friend Bob told me to use EASEUS Partition Master or Partition Magic, but i dont know which one to choose?
View 9 Replies
View Related
Feb 6, 2009
Well for some reason when i wiped my HD clean and tried reinstalling vista home premium i couldnt make a partition until i lowered it to 250 gig. even though when i got it there was 650 gig. So now ive got 400 gig of unallocated space i want to addon to this partition. how would i do that WITHOUT UN installing vista and LOSING my data
View 7 Replies
View Related
Jan 14, 2009
I think I messed up my hard drive while trying to erase the EISA partition on it. It's a Gateway P7811-FX laptop with a single 200 GB hard drive. Before, I only had 1 main partition: the C: Drive (176.31 GB), along with the hidden 10 GB EISA partition. After making recovery disks, I followed this tutorial: Delete and Remove to Unlock EISA Hidden Recovery or Diagnostic Partition in Vista » My Digital Life
Following that, I went in Disk Management. The hidden partition showed up, but I couldn't extend the C drive to use the unallocated 10 GB, so I converted it to a simple 10 GB volume. Then I used Acronis Disk Director Suite and merged the two partitions. And now, I can't do anything in Disk Management. There's only one partition now (186.31 GB), but when I right click on it, there's no options to create, shrink, delete, or extend the partition. They were there before, but the only option that shows up is Help.
Under Status, it says Healthy (Active, EISA Configuration). I think I merged the partitions the wrong way, so now there's no "System, Boot, Page File..." partition. Everything is on the EISA partition. When I try to run Acronis, the program doesn't load up. I've tried using Diskpart but I can't create any new partitions either.
View 9 Replies
View Related
Jul 26, 2009
I've got a Hp computer that has Vista Home Premium 64 bit on it and I want to remove the partition D which is the recovery partition. I have factory backup dvd's, made my own backup dvd's and have a True Image of the drive with both partitions, so I think I'm covered. Anyone know how to go about removing the complete partition?
View 5 Replies
View Related
Feb 17, 2009
I don't know if this is the place to post this thread so excuse me if this is the wrong group, I saw none that really applied. I'm running Vista SP1 64bit.
I'm looking for a Free Partition program to partition my external hard drive into at least 2 partitions. Does anyone know of such a program that's straight forward without all the bells and whistles? Also, would I set the partitions as Logical or Primary? Currently the drive is a Primary but if I partition it into 2 partitions what should they be?
View 9 Replies
View Related
Mar 13, 2009
My C: drive is 1Tb in size (931.43Gb), with Used Space of 73.8Gb and Free Space of 857.65Gb. I want to shrink the C: partition down to 200Gb, and use this just for my OS and App files - I'm running Vista Ultimate 64 bit. This would then leave me with a new partition of c. 750Gb for my data files and documents etc. However, Vista will only offer to shrink the C: partition by around 260Gb as a maximum. It will not allow me to select a larger size than this. I've tried turning off System Restore / Shadow Copies, but this makes no difference. Any ideas why this should be, and what can I do? p.s. I've tried using Acronis Disk Director as well, but whilst I can select a new C: partition size of 200Gb, when the system reboots, nothing has changed, so ADD won't work either.
View 4 Replies
View Related
Mar 26, 2008
I've got a really weird scenario: I've installed Vista on one of my partitions, after a few days it got corrupted, so i've installed another version on a different partition (different disk as well). I've since deleted the first vista installation. Now vista works perfectly on my other partition, no problems. However, when looking at the disk management I can see that the old vista partition's status is:" Healthy (System, Active, Primary Partition)" whereas my working vista partition is: "Healthy (Boot, Page File, Active, Crash Dump, Primary Partition)" My vista partition is not a system partition. This causes some problems, as I can't format the old vista partition. Trying to disable the disk at startup and booting with the Vista DVD doesn't help (it recognizes some problem but when rebooting, nothing happens, no loading of anything).Is there a way to assign the 'System' attribute to another partition and/or to remove the 'System' attribute from a partition?
View 4 Replies
View Related
Jul 17, 2008
I am about to install Vista64 home premium on a new build with 8 megs of RAM. The disk is Vista64 SP1. I was wondering if it is still recommended to install Vista64 with only 1 stick of RAM first prior to installing all 8 megs? Or because the disk has SP1, is this no longer an issue?
View 9 Replies
View Related
May 25, 2008
I would like to check the memory for errors BEFORE I load/install Windows Vista Home Premium x64 to avoid install hang-ups. Can you make an ISO CD of this program, load it in your CD/DVD drive and check your memory for errors? I recently updated the BIOS on the board (DP35DP) and it does show all of the 4GB of Kingston ValueRam PC800 1.8v (2x2gb) installed. I have good reason to believe that it's from a respectable manufacturer. Just want to make sure the memory is good before I load up the OS.
View 9 Replies
View Related
Dec 6, 2009
I am helping a friend install windows updates on her Sony VAIO laptop with Vista Home Premium SP1 installed. Laptop had not been updated since January 2009. All updates completed fine with the exception of KB973565. When installed via automatic windows updates I get the following error...........
View 9 Replies
View Related
Jan 30, 2007
I'm assuming a clean install with an upgrade license will be identical to a clean install with a 'full' copy, except that at some point during the process, it will ask for my key for Windows XP? I just want to confirm this is the case before I go buy an upgrade copy. one last question to tack on here - if I have a desktop and a laptop computer will it let me install the same copy and license key of Vista on both? I know some MS products in the past have allowed you to install on more than one computer because they realize a lot of people have more than one computer but they only work with one at a given time.
View 6 Replies
View Related
Jan 8, 2010
I was wondering if anybody could help shed some light on an issue i've been having with vista (home version running on a Dell XPS 420)
I've set it up with 2 partitions (one with the OS and the other with everything else) My problem is that however big i make up the OS partition vista eats it like there's no tomorrow. I've left it at 40GB but already have around 9GB free......(i completely reinstalled from scratch on Tuesday) so just waiting for more massive updates from Microsoft and that'll be gone. The real trouble is that using the OS installation disk i was given with the machine i cant extend an active partition with out erasing and formatting the partition. Could anyone advise me how to do this without erasing any data? please dont say i have to buy partition magic! surely the chaps at Microsoft envisged this as a potential issue
View 9 Replies
View Related
