I got a laptop with Vista Ultimate 32bit and a XP desktop
Both of my PC is connected to DSL-2640T Modem+Router.
I change both my PC under MSHOME group.
My laptop using wireless connection & my desktop is on cable.
I have read some thread by installing a update on XP and reset in Vista but nothing happens.
I am experiencing a whole deal of difficulty running a clean install of vista ultimate x64.
Now upon install it seems to boot fine and get into the initial install setup of keyboard type (US etc...) and the selection of the OS, I select my HDD to install vista on and the installation goes away copying files and extracting files ... then upon the reboot to setup the rest of windows this is where it all goes terribly wrong, i have had several different errors and BSODs examples are below:
0x0000001a
0x00000024
0x00000034
0xc0000005
iqrl_not_less_or_equal
CACHE_MANAGER
BAD_POOL_HEADER
Now i have researched all the errors i have had show up and can define nothing in common with them all, I have removed the X-FI creative sound card, wireless kbd and mouse and gone back to basics, i have checked all my hardware and it IS compatible with x64 but still no luck.
My system consists of:
M/B - PN5-E SLI
PSU - Thermaltake tough power 1100W
CPU - Q6800 quad core
PGU - EN8800GTS x2
ram - 1G x4 kingston ddr2
HDD - WD 500G
i can get no replication of the error it just goes mental on the initial reboot after installing windows, and then reboots over and over, sometimes it gets further and gets back into windows but then i just get told the pc rebooted unexpectedly or the install was interupted to reboot and reinstall, i have tried to repair the half install but still no resolve (the even weirder thing was i tested vista ultimate x86 (32-bit) and all installs fine.
I have been unable to install Vista's SP2. Otherwise, the system runs fine and all previous updates have been installed. Will the system be lacking something if I just continue with normal updates?
View 8 Replies View RelatedHad a virus on my computer. Friend of mine was able to wipe out my hardrive and start over, and reinstalled Vista, but my pc is not able to run vista properly. When I try to reinstall XP, it gives me an error message saying I already have a higher windows version installed. How do I get Vista off my PC?
View 9 Replies View RelatedSince installing AVG 9 I have a few problems, one which is now known to AVG that attachements cannot be sent in the likes of Yahoo and Sky Mail, this has gone to the developers.
This one may not be AV related so thought I would ask here.
I have been unzipping files in Vista with no problem, after the download of AVG 9 I am unable to open them.
When I right click on the file I do not get Extract all in the list.
I do not know which is the program that opens zip files within Vista and so I am unable to tell it which program to Open with.
Not sure what is happening to my vista laptop. Recently i have noticed that i am unable to play my DVD's. More to the point I am unable to see the DVD player in my computer.
What i have done to remedy the situation is as follows.
1. Booted up and checked the BIOS made sure that the CD was booting first and HDD second.
2. Checked in My Computer properties there was no exclamation mark against any hardware and i was unable to see my DVD detailed there.
3. The DVD player is an internal player and i am unable to detatch and re-attach.
im trying to reformatt my vista partition. Because I feel like it, and its getting a bit laggy.
But anyways, I go and click on computer->vista drive->format->quick format-> error unable to format.
why does this happen!
Ive just installed Vista Ultimate 64 bit on my comp and im having trouble sharing files with another computer that has WinXP 32bit installed. Ive checked that the workgroup names are the same and that file sharing is enabled, but it wont allow me to access files on my vista machine FROM the winxp machine. I have no trouble accessing files on the winxp machine from my vista machine, but it wont work the other way around. It gives me an access denied error due to permissions, even though I let it have full control. Could this be because the 32bit is clashing with the 64 bit? Because I previously have winxp installed on both machines and file sharing was working fine.
View 4 Replies View RelatedI originally had a WinXP computer which had some mapped drives, one of these being to a shared folder on my work laptop.The mapped drives were used so I could run a Robocopy script to backup my laptop to my WinXP computer.Prior to wiping out WinXP and installing Vista 32 Home Premium, I took a screenshot of my mapped drives.Now I can seem to get Vista to map the shared drive on my laptop. It keeps prompting me for a username and password even though I used the same username and password that I use when I log into my WinXP Pro laptop. When I first go to map the drive, I select the option to "Connect using a different username"In Vista, if I go to Windows Explorer and expand the Network, I can see my laptop (called "Maxs_Laptop")I have set up the same IP address on my Vista machine as there was when it had WinXP Home running on it and the Workgroup has also been set to the same.Furthermore, I've turned off Windows Firewall as I use Zonealarm and I've set a range of IP addresses as being trusted.What am I doing wrong, or what is changed in Vista that I have to adjust?BTW, I can connect to mapped drives on my loungeroom PC which is running WinXP Home, but I think the reason I can is that the loungeroom PC doesn't prompt for a login/password on bootup, whereas my work laptop (WinXP Pro) does.
View 9 Replies View RelatedAfter being unable to install SP2 for Ultimate, my computer now says that I have to re-install Vista. Is there a way to get my data from the computer before doing this. I was in the process of backing up all of my inventory for my store and it reset on its own.
View 4 Replies View RelatedWhenever I try to click on X: in My Computer I get the following: X: is not accessible. Access is denied. That's kinda funny given that earlier today, chkdsk /F was able to not only run on the drive but actually told me a few filenames (the records for those files had to be updated). I ran Ubuntu LiveCD and was able to access the drive just fine from that, as well. My question is... given all this, why am I unable to access the drive from Windows Vista? Sure, maybe the drive is going bad, but that doesn't explain why Ubuntu LiveCD and chkdsk /F can access it and Windows Vista cannot. So, short of just abandoning Window Vista all together in favor of Ubuntu, what can I do?
View 9 Replies View RelatedI built a new machine using Microsoft Vista Ultimate 64-bit. All aspects of the machine appear to be working as expected, except for printing. I am unable to print to a functioning, directly-connected HP Deskjet 820Cse. I connected an older HP Deskjet 722c with the same negative results. The Vista sees both printers when connected, and says all drivers are correctly loaded. I try to print a test page, and in both printers the printer pre-loads, pulling up a sheet of paper into position for printing - and then stops. After about 60 seconds, the printer resets the printer cartridge, and then does nothing except blinks the power light. When trying to print to a LAN printer (one of the HPs listed above), Vista 64-bit indicates that the PC that is sharing out the printer has the incorrect drivers, yet it works fine with the shared PC running XP. Another Vista Home Premium machine on the LAN has no issues printing to the shared printers.
View 4 Replies View RelatedI just bought an acer laptop with Windows Vista Home Premium and would like to setup the send to folder for more destinations. On XP this was a matter of typing send to in the run in startup and hitting enter and the send to folder was displayed.I have been unable to figure out this in Vista. how to do this in Vista?
View 4 Replies View RelatedI purchased a new CPU, RAM, mainboard and graphic card. It's the NVIDIA GeForce 9800 GT, 512 MB, 256 Bit for about 100€ (~127 USD). Now that's already a nice card, but for 125€ (~158 USD) I could buy the same card with 1024 MB. That's easily 100% more for only +25% of the original price. Now my question is, using a dual monitor setup with the maximum resolution of 1440x900, would that be worth the money? I heard once or twice that video card memory is mostly related with the resolution.
View 5 Replies View RelatedI have -Dell XPS 730x with 6 GIG DDR3 RAM, Intel i7 64 bit Processor, 500 GIG disk,
I am running -Windows Vista Home Premium 64 which was preinstalled on the cpu
I want to -Dual boot between Vista64 and Windows XP32
So far -I have done everything to this machine from creating a virtual window in Vista64, to going into the command prompt from vista boot disk and running diskpart to clear hard drive.
I currently have -Two partitions on one disk. Primary 200GIG and Healthy 265GIG -Windows Vista Home Premium64 installed and running
The problems im having -every time try to boot from CD and run the windows xp setup, it is UNABLE to find ANY HARD DRIVES!
I have researched that
- I must have the disk partitioned
- Windows XP must be installed first
- I have to play with the boot.ini
- If i install vista32 it will be more successful
The errors I have gotten -STOP: 0x0000008E - i researched this and it said one option is to take out the excess RAM
I will be happy if - By the end of this weekend I can successfully run XP or both OS's in dual boot.
I need to go through all this trouble because - Digidesign has not written software for 64 bit proccessing yet. I need to make music.
Is anyone else having problems installing this speific KB937287 update? I am unable to get it to stop showing up in my 64-bit Vista UE's Windows Update even though it was a success. All other today's updates were fine except one (KB937287 failed) and then rebooted, but now KB937287 keeps showing up even after successful installs.
View 9 Replies View RelatedI can't seem to be able to installer the Hyper-V Manager on my Windows Vista Business x64 with SP2. I have enabled the RSATs and it is not one of the options. so i have downloaded the patches from KBs 970203, 941314, 952627. I always get this error: The update does not apply to your system where can i get the Hyper-V manager?
View 9 Replies View Relatedi m trying to install vista and i get this error message: I have a partition of 40.8 GB for installing vista. I m using a 80 GB hard drive.
View 9 Replies View RelatedI am unable to get Vista to recognize drivers for my Seagate Barracuda 7200.12 in a non-RAID capacity. It's a SATA drive and I am of the understanding that these cause similar problems fairly frequently. In most cases about which I have read, the issue has been solved by choosing the "load driver" option during Vista installation and manually selecting a SATA driver from a driver disk of some form. Unfortunately, this course of action has not turned up any SATA driver on my motherboard's driver disk nor have I been able to find one at the manufacturer's (Gigabyte) website. I am currently waiting for a reply from Gigabyte customer care and am about to look up JMicron's (the SATA controller producer for Gigabyte) website, but I hoped someone here might have some insight into the problem.
View 9 Replies View RelatedI am unable to send email. Using Vista. Have emptied outbox as suggested in other posts. Outbox was emptied without difficulty, sent to drafts, then deleted. Created new email - tried to send - still couldn't. Error message - unable to connect to smpt server. Have gone to tols - accounts - servers - re-entered info.
View 7 Replies View RelatedWith my PC I do have 2 internal DVD/CD-ROM and another external via USB. All 3 disappeared from "My Computer" and from "Disc Manager" and I am now unable to use anyone of them. But in "Device Manager" they are shown with a yellow mark and a "!". If I uninstall anyone of them and reboot it will appear again in "Device Manager" with that mark. If I try to update its controller the Windows search Internet and a message says that best controller for it is already installed. But it is still not appearing in My Computer. All other hardware and programs are working OK including external storage, printer and scanner.
View 8 Replies View RelatedI've recently updated my drivers (mainboard, network card, and graphics card) and for some reason I am unable to log into WoW with 3 of my 4 characters. I can log in with my rogue just fine and run around, but as soon as I try to log in any other character (warrior, druid, or DK) I'm instantly disconnected from the server as well as from my home network. The only fix is to restart the computer so I can get back onto the network. I've tested removing all addons, deleting the WTF, Cache, and Interface folders. I've done a repair using the Blizzard repair .exe and I'm still only able to log in using the rogue. I have two desktops and a laptop at home and I don't have a problem playing the game on any character using the other desktop or the laptop. I'm pretty sure there is some sort of corrupted file for WoW in my system and I'm wondering if there is a fix other than reinstalling the entire game.
View 4 Replies View Relatedi have recently ran a registery cleaner, i do not know why. I am now having troubles with my windows vista operating system. It seems i cannot access my registery but maybe you will be able to help me with whats wrong. i have tried to install a few applications since i have "cleaned" my registery. i get these errors:
Installing AVG:...........
i think i'm kickin a dead horse here but i'm unable to get or update SP1 & 2 on my PC. i bought this PC 3 years ago with Vista on it. I thought i was getting all the updates i needed from HP. i guess not. When i go to windows updates, it looks for a minute then comes up with the 80080005 error. the no updates error. ok, so i got a hold of the HP people and they gave me links to do everything to make my horse come alive--AND jump through hoops. it ain't happenin......
View 9 Replies View Relatedi realize my CPU is kind of a weak link in my set up but i've had excellent results overclocking it until i moved to vista. I previously ran XP Professional SP3 and had the system overclock to 3.1Ghz with no issues. The CPU temp ran at full load around 39C. Before i upgraded to vista i set all system settings back to default did my upgrade and then proceeded to push my overclock again. No matter when i changed my settings to it would show only the 2.8Ghz for processer speed in system settings. According to my motherboard the bus speed and multiplier are set high enough to obtain the 3.1 overclock again but the system settings are showing it only at 2.8Ghz.
View 9 Replies View RelatedI have Vista basic edition. At the CMD command line, I cannot ping anything successfully (e.g., www.cnn.com, www.google.com).However, with my broswer, my Internet connection is working fine.
I have been trying for ever to do an upgrade install, vista home premium 64 over vista home premium 64 to solve some WU problems but haven’t had any luck. I have no service packs installed, and are trying to upgrade from a non service pack vista disk. It seems to skip asking me if I want to upgrade at all. It goes like this
Insert vista DVD
Click install now
Product key screen (i don't put it in right now)
Choose version (home premium 64)
Agree to license
>>This is where it gets different<<
It asks to select partition (I dual boot xp)
After I choose the partition that contains my vista installation it gives me a warning that files may already be there and they will be moved to windows.old I went ahead and agreed once and it went to the screen that said copying files 0%... at which point I clicked cancel. I was afraid to leave it to see if it would..............
I am facing a problem on launching GOW it says some fix need to be done regarding Graphics in Vista.(i.e to download the fix for some memory Kp.). Anyone with same issue.... Please tell me the way to resolve this. Do i need to install SP1 to solve this...???
View 8 Replies View RelatedI just recently built a new PC and I am installing windows home premium 64 bit for the first time on a PC. When installing vista everything was normal until there was a reboot in the installation. After the reboot it sent me to a windows error recovery screen where I am unable to select anything using the keyboard. The default selection is start windows normally so I wait for the countdown to finish because I have no other choice. Then it boots up and says the following:
The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install windows, click "OK" to restart the computer, and then restart the installation. So I click ok because once again I have to. Note: The keyboard is working again. This continues over and over again so I tried to reinstall windows again. I get the PC to boot from the DVD drive by using my keyboard and then it says: Press any key to boot from CD or DVD.
Just recently I have been unable to download anything. I dont get an error or anything, it just acts like it is downloading but when its done there is no icon for me to click on. I have tried downloading to my desktop, making a folder and downloading it in there nothing works. And its not one thing in specific, I am unable to download anything at all. I thought it could be an IE problem so I tried downloading Firefox to see if that would work but I cant download that either. Hitting "run" does the same thing, the dialog box appears and it acts as if it is completing but then nothing happens it just dissappears.
View 7 Replies View RelatedI downloaded and installed the vist drivers for lexmark x2530 its all good but when I try to fax it says send failed with no what sounds like modem connect. Tried other software like Faxmachine and able to fax with no problems. Where could my problem be.
View 6 Replies View Related