I've done a lot of searching tonight so I know I'm not the first one to have this issue, but I haven't found any kind of satisfactory solution. Here is my situation: I have an HP Pavilion 6716 laptop with Quanta 30CC 79.26 mother board with a bus clock of 533 Mhz. I currently have two DDR2 PC2-5300 1 GB sticks of RAM in the machine (from factory) and all is well. I confirmed with HP that my machine can handle 4GB so I got two DDR2 667 2GB sticks of RAM (Kingston). If I put either one of the new sticks of RAM in I have no problems (first or second slot, makes no difference). But if i put both in I get the BSOD and first a PFN_LIST_CORRUPT error, then a reboot and then a IRQL_NOT_LESS_OR_EQUAL error and that's all she wrote. Put back the original RAM and all is well. I've read all about the MS KB929777 and I've uninstalled the patch then re-installed and it made no difference. Is there anything anyone can tell me or am I just shafted at 2GB RAM?
I recently tried to upgrade from Vista Basic to Vista Premium but the activation key didn't work. So I recovered Vista Basic from the windows.old file but there is still a corrupt version of Vista Premium on my hard disk. how to remove it?
I have been trying to upgrade from Windows XP Tablet Edition to Vista Ultimate on my Travelmate C300 laptop. I have found the following error file after the install fails in the location: C:$WINDOWS.~BTSourcesPanther. The file is called: setuperr.log. The content is quite long but i will post it here - advise how i can upgrade to Vista?.................
my PC crashed and will not boot, the NTOSKRNL.EXE is missing or corrupt, repair from the DVD does nor fix the problem. I need to reinstall but the only option I get when bootin from the DVD is to "Install from Windows" but Windows will not boot up.
How does it work? I click on "Anytime Upgrade" & I go to a website where I pay for the upgrade license key, correct? Let's say, for instance, that I want to upgrade from Home Premium to Ultimate. It is an upgrade not the full version, correct? If I format the hard drive & reinstall Windows, can I go straight to Ultimate or must I reinstall Home Premium first & then install the upgrade to Ultimate?
i am not the best tech kid when it comes to the hardware part of computers. With that said, I am looking to upgrade my CPU. With hard times i dont want to spend a fortune and i am looking into a chip on ebay.... I just bid on it so that even if it wont work, i can have a spare around. Is it will be compatable with my delll inspirion 530. I would much much much appriciate this and will do ANYTHING i can to make it up to you.
I have Vista Home Basic. A few weeks ago I updated to IE 8, as my updates recommended it as an important update. Since that day I have not been able to use IE 8. The page doesn't even load all the way, and I get the message that DEP has shut down IE 8, and then I can't access it to try to fix anything. One time I was able to follow the link to the DEP info, and there is no option to shut it off. It is very frustrating to have your system tell you to upgrade and then have it not work. This is not the first problem I've had with Vista and IE. The last time I loaded another browser, and I'm glad I left it loaded or I wouldn't be able to use my computer at all. My computer wasn't even able to go back to a previous restore point. Microsoft, Vista, and IE 8 need to be more user friendly, not all people who rely on computers are computer heads. It would take me ages to figure out to fix the problem even with directions and helpful links. Recommended upgrades should work without having to jump through all kinds of hoops to get them to work.
CANNOT SIMPLY UPGRADE WITHIN VISTA??? FIRST TIME ISSUE EVER POSTED! I have a question that I cannot make sense of. I have Windows Vista Home Basic with SP1 installed on my computer. I have a copy of a legit retail version of Windows Vista Ultimate Upgrade SP1 DVD-ROM. I want to upgrade my current Vista Home Basic to Vista Ultimate. Sounds simple enough. I have read everywhere on the web and it can upgrade easily as long as you upgrade within Windows Vista and not a reboot installation. Okay, but when I get to a point in the Vista grade process, I CANNOT! During the installation process, when I get to the screen that states, "Which type of installation do you want?" AFTER INPUTTING THE VISTA ULTIMATE KEY CODE ON A PREVIOUS SCREEN, the option should be "Upgrade" ONLY and NOT "Custom (Advanced)" since the key code is set for upgrade option only. I GET THE TOTAL OPPOSITE!!! I only get the option "Custom (Advanced)" and the "Upgrade" option is grayed out. WHAT??? NO "Upgrade" option??? I SHOULD BE GETTING THE "Upgrade" OPTION!!! This does not make any sense!!! It states at the reason at the bottom of this screen, "Upgrade has been disabled. - The upgrade option cannot be started, to upgrade, cancel the installation and then choose to upgrade to a version of Windows that is more recent than the version you are currently running." This does not make any sense, does it??? I should be able to only upgrade since I only have an upgrade disc. I am upgrading from a lower edition of Vista to a higher edition of Vista, therefore I should ALSO have this feature to upgrade enabled too when it knows my CD key is a higher ("upgrade") edition. I have spent several hours searching and read around the web and cannot find my same or similar case scenario. A first time! People who have upgraded between different editions of Vista with either the Windows Anytime Upgrade retail package or (mine) the Windows Vista Ultimate Retail Upgrade box (includes the Windows Anytime Upgrade anyways on it) say it is a breeze! What is going on with me??? I should not be having any problems what-so-ever!
I upgrade my notebook to Vista and the video drive automatic installed by Vista is RADEON XPRESS 200M (WDDM), version 7.14.10.8333. When I try to install the version 8.5 (from the ATI site) nothing happens. If I force to install the new drive, Vista Update still inform the best drive is the older, and the CCC (Catalyst control center) still not installed.
I have been wracking my brain for weeks now, trying to play C&C First Decade with Red Alert 2 Yuri's Revenge over the LAN, it will only run on IPX networking which I could setup with 2x XP machines, I have Vista Ultimate on my PC, and XP on another, I found some drivers for IPX to work on Vista, didn't work ... So I loaded Hamachi which had built-in IPX support. Now when I open RA2, it no longer says IPX unavailable, it shows 00 00 00...
So it can see my Hamachi adapter with IPX support, great! The other XP machine has Hamachi installed, and they are both VPN'd (Connected) on the same Hamachi Network. They don't see each other... The XP machine shows a few IPX networks, I have tried switching to them all, even put the Hamachi adapter and the LAN adapter to the top of the preferred networks list. This was sort-of a breeze with both XP, but with Vista it's looking to be a bit tricky. I have no firewalls running on either machine and I am pretty cluey when it comes to networking (TCP/IP that is).
Can I do a upgrade from a XP 32bit Machine to Windows Vista 64bit by just adding the disk, hitting intall and all that, or do I need to do a clean install when changing to 64bit.
Also, if it's just your average HP machine with a AMD Athlon 64 x2 3800+ with 2GB ram and a 200GB HD.. is 64bit even really needed, or should I just do 32bit. As I'm installing vista and then selling the machine to someone locally.
Is it possible to upgrade my Vista 32-bit to Vista 64-bit without a reformat? I really don't want to have to go and deal with the PITA backups and reinstallation of programs... I looked around the net and got distracted by my 64-bit version of Windows 7 (which got me thinking "Damn it, now I need more RAM) before I could find any answers...
I have been scanning this site to sole an upgrade problem and I would just like to confirm that I have wasted my time buying 64bit Vista unless I want to Start with a fresh install?
I just built a new PC and for some reasin it would not do the initial install from the Vista disk. This appears to have been a problem experienced by others with the same motherboard (Asus P5KPL-CM). SO I found a copy of XP S2 and installed that thinking that I could upgrade - apparently not which makes sense since I have read this forum.
Is there a solution to being able to get the PC to do a fresh install from the VIsta 64 disk?
I just completed an upgrade from Vista to Windows 7 on my HP Pavilion a1730n and all w2orks fine except for recovering from sleep mode. It looks as though I will have to replace the motherboard in the Pavilion. I am looking for comments as to what I may expect when Windows 7 is booted into a new motherboard.
I have recentley upgraded from XP to vista home premium 32 bit but seem to have lost all sound. I thought I had found the correct drivers but I was wrong. I'm pretty sure it's nothing obvious like a 'mute' being on. My problem sound similar to this post I found while browsing --- No sound with vista!
I am about to upgrade to Vista premium 64 bit. I am currently running XP pro. My processor is a Pentium 4 660 (64 bit. Am i right in believing that at the moment, everything will be running at 32 bit, due to xp only being 32 bits?? (I have not got the 64 bit version). Does this include say Flight Sim X which has been designed for 64 bit?The reason i think this, is because xp is running at 32 bit, that will mean that everthing that is running on the system will also run at 32 bit whether it can run at 64 bit or not.
I am have been trying to upgrade to Vista Ultimate 64-bit with no luck. I get it to install the initial files and when it reboots I get the blue screen of death. I have the 32-bit Vista Ultimate installed with no problems whatsoever. I have a Nvidia 780i sli with pentium quad core 3gb and 2 Nvidia 8800 gtx graphics cards. For my ram I have 8gb of ddr2 8500mhz Kingston hyperx.
here is what i like to do right now i have window 7 on a brand new [500]hard drive .tomorrow i will get my brand new [250] hard drive and i like to install vista on it .but not using dualboot .but all i have is a upgrade cd that came with my computer when i got it in 2007 is that possible to do. i am not to good with computer .am 66 and no school. so all i will do is turn off my pc and disconnect the red cable from w-7 and connect it to the vista drive .and leave the power connected on the 2 drive maybe one time a month.
On a previously registered copy of VISTA Ultimate, I installed an evaluation copy of Windows SP1. In the bottom right part of my screen, it states: "Windows VISTA (TM)Evaluation Copy Build 6001." Now, many months later, I have begun getting balloons that my evaluation copy is about to expire, and I need to install any version of Windows VISTA. I REALLY do not want to do a clean install, or loose any data or programs.
I have a new laptop with Vista Home Premium and I want to downgrade to XP Pro. I have read that with the Business or Ultimate editions that I can phone customer support and do a downgrade to get an XP key if I give them my unactivated Vista key. Since I don't have Business or Ultimate, can I do an upgrade to that and then downgrade to XP Pro (as it will be cheaper than buying the non-OEM XP Pro)?
i want to reformat my laptop. it originally had xp but i upgraded to vista home premium, if i reformat, can i use the vista upgrade again? on the box it says one installation on one pc. anyone shed any light for me
Can I change my processor from a dual core to a quad core on a motherboard that supports quad core running vista 64 ultimate without having to re-install the my OS? Also, will replacing the CPU trigger a call to Microsoft to revalidate. I'm thinking of replacing my Intel E6600 dual core with an Intel Q9550 quad core.
Recently I upgrade from XP to Vista. Lots of problem coming up.I can't select audio language from my window media player when I play my vcd. The movic has two voice/sound and I need to select either right or left to get the voice/sound I want.Can anyone tell me how to get this thing work?
i have a Dell 1520 latop with OEM vista home, less than 3 years old and with dell getting ready to start selling laptops with windows 7. i am wondering will dell offer a upgrade to my vista OS?
Windows Vista 64 home premium is arguably the most popular Operating System worldwide (for new computers) I have a legitimate copy of Windows Vista Home Premium 64 bit DVD in my possession, with the key ready, and everything.
1. A consumer cannot upgrade xp Professional to vista HOME edition without a clean install 2. A consumer cannot upgrade a 32 bit OS to 64 bit OS without a clean install 3. Theres no such thing as XP Home 64 bit OS 4. The upgrade key fails to activate a clean install (works upgrade only)
There seems to be no upgrade path available. Is this true? If this is true, isnt the concept of a 64 bit Vista Home premium Upgrade DVD useless? and if that is also true, then why did microsoft sell me this DVD?
